Add svn:eol-style native property to TCL files that are missing it.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/tcl/board/atmel_sam3u_ek.cfg b/tcl/board/atmel_sam3u_ek.cfg
index 53c8d3483e405068a760aa6246fd2c19ed0ec811..f7501d000fd7f2f2e4fdbe6636003d2a2e8c484a 100644 (file)
--- a/tcl/board/atmel_sam3u_ek.cfg
+++ b/tcl/board/atmel_sam3u_ek.cfg
@@ -1 +1 @@
-source [find target/at91sam3u4e.cfg]\r
+source [find target/at91sam3u4e.cfg]

diff --git a/tcl/target/cs351x.cfg b/tcl/target/cs351x.cfg
index 51631d36c225e9bccac979c3dc7743ffe54d685b..75d228387944ade3d3ef4f3b7948f5213c0d0dc0 100644 (file)
--- a/tcl/target/cs351x.cfg
+++ b/tcl/target/cs351x.cfg
@@ -1,30 +1,30 @@
-if { [info exists CHIPNAME] } {        \r
-   set  _CHIPNAME $CHIPNAME    \r
-} else {        \r
-   set  _CHIPNAME cs351x\r
-}\r
-\r
-if { [info exists ENDIAN] } {  \r
-   set  _ENDIAN $ENDIAN    \r
-} else {        \r
-   set  _ENDIAN little\r
-}\r
-\r
-if { [info exists CPUTAPID ] } {\r
-   set _CPUTAPID $CPUTAPID\r
-} else {\r
-   set _CPUTAPID 0x00526fa1\r
-}\r
-\r
-jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID\r
-\r
-# Create the GDB Target.\r
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]\r
-target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME -variant fa526\r
-# There is 16K of SRAM on this chip\r
-# FIXME: flash programming is not working by using this work area. So comment this out for now.\r
-#$_TARGETNAME configure -work-area-virt 0x00000000 -work-area-phys 0x00000000 -work-area-size  0x4000 -work-area-backup 1\r
-\r
-# This chip has a DCC ... use it\r
-arm7_9 dcc_downloads enable\r
-\r
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME cs351x
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x00526fa1
+}
+
+jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+# Create the GDB Target.
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME -variant fa526
+# There is 16K of SRAM on this chip
+# FIXME: flash programming is not working by using this work area. So comment this out for now.
+#$_TARGETNAME configure -work-area-virt 0x00000000 -work-area-phys 0x00000000 -work-area-size  0x4000 -work-area-backup 1
+
+# This chip has a DCC ... use it
+arm7_9 dcc_downloads enable
+