return JIM_OK;
}
+/* REVISIT Just what about these should "move" ... ?
+ * These registrations, into the main JTAG table?
+ *
+ * There's a minor compatibility issue, these all show up twice;
+ * that's not desirable:
+ * - jtag drscan ... NOT DOCUMENTED!
+ * - drscan ...
+ *
+ * The "irscan" command (for example) doesn't show twice.
+ */
static const struct command_registration jtag_command_handlers_to_move[] = {
{
.name = "drscan",
.mode = COMMAND_EXEC,
- .jim_handler = &Jim_Command_drscan,
- .help = "execute DR scan <device> "
- "<num_bits> <value> <num_bits1> <value2> ...",
+ .jim_handler = Jim_Command_drscan,
+ .help = "Execute Data Register (DR) scan for one TAP. "
+ "Other TAPs must be in BYPASS mode.",
+ .usage = "tap_name [num_bits value]* ['-endstate' state_name]",
},
{
.name = "flush_count",
.mode = COMMAND_EXEC,
- .jim_handler = &Jim_Command_flush_count,
- .help = "returns number of times the JTAG queue has been flushed",
+ .jim_handler = Jim_Command_flush_count,
+ .help = "Returns the number of times the JTAG queue "
+ "has been flushed.",
},
{
.name = "pathmove",
.mode = COMMAND_EXEC,
- .jim_handler = &Jim_Command_pathmove,
- .usage = "<state1>,<state2>,<state3>... ",
- .help = "move JTAG to state1 then to state2, state3, etc.",
+ .jim_handler = Jim_Command_pathmove,
+ .usage = "start_state state1 [state2 [state3 ...]]",
+ .help = "Move JTAG state machine from current state "
+ "(start_state) to state1, then state2, state3, etc.",
},
COMMAND_REGISTRATION_DONE
};
}
}
-static int jim_jtag_interface(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+static int
+jim_jtag_interface(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
Jim_GetOptInfo goi;
Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
{
.name = "init",
.mode = COMMAND_ANY,
- .handler = &handle_jtag_init_command,
+ .handler = handle_jtag_init_command,
.help = "initialize jtag scan chain",
},
{
.name = "interface",
.mode = COMMAND_ANY,
- .jim_handler = &jim_jtag_interface,
- .help = "Returns the selected interface",
+ .jim_handler = jim_jtag_interface,
+ .help = "Returns the name of the currently selected interface.",
},
{
.name = "arp_init",
.mode = COMMAND_ANY,
- .jim_handler = &jim_jtag_arp_init,
+ .jim_handler = jim_jtag_arp_init,
+ .help = "Validates JTAG scan chain against the list of "
+ "declared TAPs using just the four standard JTAG "
+ "signals.",
},
{
.name = "arp_init-reset",
.mode = COMMAND_ANY,
- .jim_handler = &jim_jtag_arp_init_reset,
+ .jim_handler = jim_jtag_arp_init_reset,
+ .help = "Uses TRST and SRST to try resetting everything on "
+ "the JTAG scan chain, then performs 'jtag arp_init'."
},
{
.name = "newtap",
.mode = COMMAND_CONFIG,
- .jim_handler = &jim_jtag_newtap,
- .help = "Create a new TAP instance",
- .usage = "<name> <type> -irlen <count> [-ircapture <count>] "
- "[-irmask <count>] [-enable|-disable]",
+ .jim_handler = jim_jtag_newtap,
+ .help = "Create a new TAP instance named basename.tap_type, "
+ "and appends it to the scan chain.",
+ .usage = "basename tap_type '-irlen' count "
+ "['-enable'|'-disable'] "
+ "['-expected_id' number] "
+ "['-ignore-version'] "
+ "['-ircapture' number] "
+ "['-mask' number] ",
},
{
.name = "tapisenabled",
.mode = COMMAND_EXEC,
- .jim_handler = &jim_jtag_tap_enabler,
- .help = "Returns a integer indicating TAP state (0/1)",
- .usage = "<name>",
+ .jim_handler = jim_jtag_tap_enabler,
+ .help = "Returns a Tcl boolean (0/1) indicating whether "
+ "the TAP is enabled (1) or not (0).",
+ .usage = "tap_name",
},
{
.name = "tapenable",
.mode = COMMAND_EXEC,
- .jim_handler = &jim_jtag_tap_enabler,
- .help = "Enable the specified TAP",
- .usage = "<name>",
+ .jim_handler = jim_jtag_tap_enabler,
+ .help = "Try to enable the specified TAP using the "
+ "'tap-enable' TAP event.",
+ .usage = "tap_name",
},
{
.name = "tapdisable",
.mode = COMMAND_EXEC,
- .jim_handler = &jim_jtag_tap_enabler,
- .help = "Enable the specified TAP",
- .usage = "<name>",
+ .jim_handler = jim_jtag_tap_enabler,
+ .help = "Try to disable the specified TAP using the "
+ "'tap-disable' TAP event.",
+ .usage = "tap_name",
},
{
.name = "configure",
.mode = COMMAND_EXEC,
- .jim_handler = &jim_jtag_configure,
- .help = "Enable the specified TAP",
- .usage = "<name> [<key> <value> ...]",
+ .jim_handler = jim_jtag_configure,
+ .help = "Provide a Tcl handler for the specified "
+ "TAP event.",
+ .usage = "tap_name '-event' event_name handler",
},
{
.name = "cget",
.mode = COMMAND_EXEC,
- .jim_handler = &jim_jtag_configure,
- .help = "Enable the specified TAP",
- .usage = "<name> [<key> <value> ...]",
+ .jim_handler = jim_jtag_configure,
+ .help = "Return any Tcl handler for the specified "
+ "TAP event.",
+ .usage = "tap_name '-event' event_name",
},
{
.name = "names",
.mode = COMMAND_ANY,
- .jim_handler = &jim_jtag_names,
- .help = "Returns list of all JTAG tap names",
+ .jim_handler = jim_jtag_names,
+ .help = "Returns list of all JTAG tap names.",
},
{
.chain = jtag_command_handlers_to_move,
static const struct command_registration jtag_command_handlers[] = {
{
.name = "interface",
- .handler = &handle_interface_command,
+ .handler = handle_interface_command,
.mode = COMMAND_CONFIG,
- .help = "select a JTAG interface",
- .usage = "<driver_name>",
+ .help = "Select a JTAG interface",
+ .usage = "driver_name",
},
{
.name = "interface_list",
- .handler = &handle_interface_list_command,
+ .handler = handle_interface_list_command,
.mode = COMMAND_ANY,
- .help = "list all built-in interfaces",
+ .help = "List all built-in interfaces",
},
{
.name = "jtag_khz",
- .handler = &handle_jtag_khz_command,
+ .handler = handle_jtag_khz_command,
.mode = COMMAND_ANY,
- .help = "set maximum jtag speed (if supported)",
- .usage = "<khz:0=rtck>",
+ .help = "With an argument, change to the specified maximum "
+ "jtag speed. Pass 0 to require adaptive clocking. "
+ "With or without argument, display current setting.",
+ .usage = "[khz]",
},
{
.name = "jtag_rclk",
- .handler = &handle_jtag_rclk_command,
+ .handler = handle_jtag_rclk_command,
.mode = COMMAND_ANY,
- .help = "set JTAG speed to RCLK or use fallback speed",
- .usage = "<fallback_speed_khz>",
+ .help = "With an argument, change to to use adaptive clocking "
+ "if possible; else to use the fallback speed. "
+ "With or without argument, display current setting.",
+ .usage = "[fallback_speed_khz]",
},
{
.name = "reset_config",
- .handler = &handle_reset_config_command,
+ .handler = handle_reset_config_command,
.mode = COMMAND_ANY,
.help = "configure JTAG reset behavior",
.usage = "[none|trst_only|srst_only|trst_and_srst] "
},
{
.name = "jtag_nsrst_delay",
- .handler = &handle_jtag_nsrst_delay_command,
+ .handler = handle_jtag_nsrst_delay_command,
.mode = COMMAND_ANY,
.help = "delay after deasserting srst in ms",
- .usage = "<ms>",
+ .usage = "[milliseconds]",
},
{
.name = "jtag_ntrst_delay",
- .handler = &handle_jtag_ntrst_delay_command,
+ .handler = handle_jtag_ntrst_delay_command,
.mode = COMMAND_ANY,
.help = "delay after deasserting trst in ms",
- .usage = "<ms>"
+ .usage = "[milliseconds]",
},
{
.name = "jtag_nsrst_assert_width",
- .handler = &handle_jtag_nsrst_assert_width_command,
+ .handler = handle_jtag_nsrst_assert_width_command,
.mode = COMMAND_ANY,
.help = "delay after asserting srst in ms",
- .usage = "<ms>"
+ .usage = "[milliseconds]",
},
{
.name = "jtag_ntrst_assert_width",
- .handler = &handle_jtag_ntrst_assert_width_command,
+ .handler = handle_jtag_ntrst_assert_width_command,
.mode = COMMAND_ANY,
.help = "delay after asserting trst in ms",
- .usage = "<ms>"
+ .usage = "[milliseconds]",
},
{
.name = "scan_chain",
- .handler = &handle_scan_chain_command,
+ .handler = handle_scan_chain_command,
.mode = COMMAND_EXEC,
.help = "print current scan chain configuration",
},
{
.name = "jtag_reset",
- .handler = &handle_jtag_reset_command,
+ .handler = handle_jtag_reset_command,
.mode = COMMAND_EXEC,
- .help = "toggle reset lines",
- .usage = "<trst> <srst>",
+ .help = "Set reset line values. Value '1' is active, "
+ "value '0' is inactive.",
+ .usage = "trst_active srst_active",
},
{
.name = "runtest",
- .handler = &handle_runtest_command,
+ .handler = handle_runtest_command,
.mode = COMMAND_EXEC,
- .help = "move to Run-Test/Idle, and execute <num_cycles>",
- .usage = "<num_cycles>"
+ .help = "Move to Run-Test/Idle, and issue TCK for num_cycles.",
+ .usage = "num_cycles"
},
{
.name = "irscan",
- .handler = &handle_irscan_command,
+ .handler = handle_irscan_command,
.mode = COMMAND_EXEC,
- .help = "execute IR scan",
- .usage = "<device> <instr> [dev2] [instr2] ...",
+ .help = "Execute Instruction Register (DR) scan. The "
+ "specified opcodes are put into each TAP's IR, "
+ "and other TAPs are put in BYPASS.",
+ .usage = "[tap_name instruction]* ['-endstate' state_name]",
},
{
.name = "verify_ircapture",
- .handler = &handle_verify_ircapture_command,
+ .handler = handle_verify_ircapture_command,
.mode = COMMAND_ANY,
- .help = "verify value captured during Capture-IR",
- .usage = "<enable | disable>",
+ .help = "Display or assign flag controlling whether to "
+ "verify values captured during Capture-IR.",
+ .usage = "['enable'|'disable']",
},
{
.name = "verify_jtag",
- .handler = &handle_verify_jtag_command,
+ .handler = handle_verify_jtag_command,
.mode = COMMAND_ANY,
- .help = "verify value capture",
- .usage = "<enable | disable>",
+ .help = "Display or assign flag controlling whether to "
+ "verify values captured during IR and DR scans.",
+ .usage = "['enable'|'disable']",
},
{
.name = "tms_sequence",
- .handler = &handle_tms_sequence_command,
+ .handler = handle_tms_sequence_command,
.mode = COMMAND_ANY,
- .help = "choose short(default) or long tms_sequence",
- .usage = "<short | long>",
+ .help = "Display or change what style TMS sequences to use "
+ "for JTAG state transitions: short (default) or "
+ "long. Only for working around JTAG bugs.",
+ /* Specifically for working around DRIVER bugs... */
+ .usage = "['short'|'long']",
},
{
.name = "jtag",
projects / fw / openocd / commitdiff