Updated Floss-JTAG config file to support v0.3 and newer. Also added noeeprom version...

diff --git a/tcl/interface/flossjtag-noeeprom.cfg b/tcl/interface/flossjtag-noeeprom.cfg
new file mode 100644 (file)
index 0000000..4e3466e
--- /dev/null
+++ b/tcl/interface/flossjtag-noeeprom.cfg
@@ -0,0 +1,19 @@
+#
+# FlossJTAG
+#
+# http://github.com/esden/floss-jtag
+#
+# This is the pre v0.3 Floss-JTAG compatible config file. It can also be used
+# for newer versions of Floss-JTAG with empty or not populated eeprom. If you
+# have several Floss-JTAG connected you have to use the usb id to select a
+# specific one.
+#
+# If you have a Floss-JTAG WITH eeprom that is programmed use flossjtag.cfg
+# file.
+#
+
+interface ft2232
+ft2232_vid_pid 0x0403 0x6010
+ft2232_device_desc "Dual RS232-HS"
+ft2232_layout "usbjtag"
+ft2232_latency 2

diff --git a/tcl/interface/flossjtag.cfg b/tcl/interface/flossjtag.cfg
index 396e9648ed17f4d00613cc94ebb0bdd4f5c154da..491f39aaa6454d5025625f8a047710b1556c73a6 100644 (file)
--- a/tcl/interface/flossjtag.cfg
+++ b/tcl/interface/flossjtag.cfg
@@ -3,9 +3,18 @@
 #
 # http://github.com/esden/floss-jtag
 #
+# This is the v0.3 and v1.0 Floss-JTAG compatible config file. It relies on the
+# existence of an eeprom on Floss-JTAG containing a name. If you have several
+# Floss-JTAG adapters connected you can use the serial number to select a
+# specific device.
+#
+# If your Floss-JTAG does not have an eeprom or eeprom is empty use
+# flossjtag-noeeprom.cfg file.
+#
 
 interface ft2232
 ft2232_vid_pid 0x0403 0x6010
-ft2232_device_desc "Dual RS232-HS"
+ft2232_device_desc "FLOSS-JTAG"
+#ft2232_serial "FJ000001"
 ft2232_layout "usbjtag"
 ft2232_latency 2