The @var{num} parameter is a value shown by @command{flash banks}.
@end deffn
-@deffn Command {stm32f1x options_write} num (@option{SWWDG}|@option{HWWDG}) (@option{RSTSTNDBY}|@option{NORSTSTNDBY}) (@option{RSTSTOP}|@option{NORSTSTOP})
+@deffn Command {stm32f1x options_write} num (@option{SWWDG}|@option{HWWDG}) (@option{RSTSTNDBY}|@option{NORSTSTNDBY}) (@option{RSTSTOP}|@option{NORSTSTOP}) (@option{USEROPT} user_data)
Writes the stm32 option byte with the specified values.
The @var{num} parameter is a value shown by @command{flash banks}.
+The @var{user_data} parameter is content of higher 16 bits of the option byte register (Data0 and Data1 as one 16bit number).
@end deffn
@deffn Command {stm32f1x options_load} num
{
struct target *target = NULL;
struct stm32x_flash_bank *stm32x_info = NULL;
- uint16_t optionbyte;
+ uint8_t optionbyte;
+ uint16_t useropt;
if (CMD_ARGC < 2)
return ERROR_COMMAND_SYNTAX_ERROR;
/* start with current options */
optionbyte = stm32x_info->option_bytes.user;
+ useropt = stm32x_info->option_bytes.data;
/* skip over flash bank */
CMD_ARGC--;
optionbyte |= (1 << 2);
else if (strcmp("RSTSTNDBY", CMD_ARGV[0]) == 0)
optionbyte &= ~(1 << 2);
+ else if (strcmp("USEROPT", CMD_ARGV[0]) == 0) {
+ if (CMD_ARGC < 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_NUMBER(u16, CMD_ARGV[1], useropt);
+ CMD_ARGC--;
+ CMD_ARGV++;
+ }
else if (stm32x_info->has_dual_banks) {
if (strcmp("BOOT0", CMD_ARGV[0]) == 0)
optionbyte |= (1 << 3);
}
stm32x_info->option_bytes.user = optionbyte;
+ stm32x_info->option_bytes.data = useropt;
if (stm32x_write_options(bank) != ERROR_OK) {
command_print(CMD_CTX, "stm32x failed to write options");
.mode = COMMAND_EXEC,
.usage = "bank_id ('SWWDG'|'HWWDG') "
"('RSTSTNDBY'|'NORSTSTNDBY') "
- "('RSTSTOP'|'NORSTSTOP')",
+ "('RSTSTOP'|'NORSTSTOP') ('USEROPT' user_data)",
.help = "Replace bits in device option bytes.",
},
{