+++ /dev/null
-# TeleMini History
-
-# TeleMini Version 1.0 #
-
-The very first TeleMini design became 1.0. It was a very small,
-baro-only recording dual-deploy altimeter for model rocketry with
-integrated telemetry link.
-
-<a href="v1.0/telemini_top.jpg"> <img src="v1.0/telemini_top_thumb.jpg"></a>
-<a href="v1.0/telemini_bottom.jpg"> <img src="v1.0/telemini_bottom_thumb.jpg"></a>
-
-## Features ##
-
-### User View ###
-
-* Recording altimeter for model rocketry
-* Supports dual deployment (can fire 2 ejection charges)
-* 70cm ham-band transceiver for telemetry downlink
-* Barometric pressure sensor good to 45k feet MSL
-* Designed to use a single LiPo rechargeable battery
-* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube
-
-### Developer View ###
-
-* Hardware Features
- * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
- * Sub-1Ghz transceiver
- * 8051 MCU
- * 32k Flash
- * 4k RAM
- * USB 2.0
- * 6 12-bit analog inputs (11 bits with single-ended sensors)
- * 2 channels of serial I/O
- * digital I/O
- * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor
-* Software Features
- * Written mostly in C with some 8051 assembler
- * Runs from on-chip flash, uses on-chip RAM, stores flight data to
- upper blocks of on-chip flash
-* Tools Used
- * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
- * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
-* Licenses
- * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
- * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
-
-## Artifacts ##
-
-There is a single manual for TeleMini and all other Altus Metrum products,
-which is available in [html](../AltOS/doc/altusmetrum.html) and
-[pdf](../AltOS/doc/altusmetrum.pdf) formats.
-
-The hardware design files can be found on [git.gag.com](http://git.gag.com)
-in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).
-
-For those who don't have ready access to the gEDA suite, here are pdf snapshots
-of the files for Production PCB version 1.0 in more easily readable form.
-
-* [schematic](v1.0/telemini.pdf)
-* [pcb artwork](v1.0/telemini.pcb.pdf)
-* [bill of materials](v1.0/partslist.csv)
-
-# TeleMini #
+# TeleMini
-TeleMini version 2.0 is a small, baro-only recording dual-deploy
-altimeter for model rocketry with integrated telemetry link. The board
-form factor and features are identical to [EasyMini](../EasyMini/), with the
-addition of radio telemetry and direction finding. TeleMini is an excellent
-choice for mid-power and smaller high-power rockets, and can also be a
-cost-effective solution for booster recovery in multi-stage projects, etc.
+This is a very small, baro-only recording dual-deploy altimeter for
+model rocketry with integrated telemetry link.
+
+Production units are available from the
+[Garbee and Garbee](http://auric.gag.com) web
+store. TeleMini starter kits are also available from
+[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp).
For the latest TeleMini firmware and related ground station software, please
visit the [AltOS](../AltOS) page on this site.
-These are photos of an early prototype version:
+These are photos of our current production version:
-<a href="v2.0/telemini-top.jpg"> <img src="v2.0/telemini-top-thumb.jpg"></a>
-<a href="v2.0/telemini-parts.jpg"> <img src="v2.0/telemini-parts-thumb.jpg"></a>
+<a href="v1.0/telemini_top.jpg"> <img src="v1.0/telemini_top_thumb.jpg"></a>
+<a href="v1.0/telemini_bottom.jpg"> <img src="v1.0/telemini_bottom_thumb.jpg"></a>
## Features ##
### User View ###
- * Recording altimeter for model rocketry
- * Supports dual deployment (can fire 2 ejection charges)
- * 70cm ham-band transceiver for telemetry downlink
- * Barometric pressure sensor good to 100k' feet MSL
- * Designed to use any battery from 3.7 - 12V
- * Screw terminals for pyro connectors, switch and external battery
- * Built-in USB connector for configuration and data download
- * 1.5 x 0.8 inch board designed to fit inside 24mm airframe coupler tube
+* Recording altimeter for model rocketry
+* Supports dual deployment (can fire 2 ejection charges)
+* 70cm ham-band transceiver for telemetry downlink
+* Barometric pressure sensor good to 45k feet MSL
+* Designed to use a single LiPo rechargeable battery
+* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube
### Developer View ###
* 6 12-bit analog inputs (11 bits with single-ended sensors)
* 2 channels of serial I/O
* digital I/O
- * [Measurement Specialties MS5607](http://www.meas-spec.com/product/pressure/MS5607-02BA03.aspx) pressure sensor
- * 1MB SPI flash
+ * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor
* Software Features
* Written mostly in C with some 8051 assembler
* Runs from on-chip flash, uses on-chip RAM, stores flight data to
- on-board flash memory
+ upper blocks of on-chip flash
* Tools Used
* [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
* [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
[pdf](../AltOS/doc/altusmetrum.pdf) formats.
An outline of the board with drill hole locations is available in
-[pdf](../Documents/easymini-outline.pdf) format.
+[pdf](../Documents/telemini-outline.pdf) format.
The hardware design files can be found on [git.gag.com](http://git.gag.com)
in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).
-## [History of TeleMini](history) ##
+For those who don't have ready access to the gEDA suite, here are pdf snapshots
+of the files for Production PCB version 1.0 in more easily readable form.
-## Future Plans ##
+* [schematic](v1.0/telemini.pdf)
+* [pcb artwork](v1.0/telemini.pcb.pdf)
+* [bill of materials](v1.0/partslist.csv)
-Our current prototypes mostly work, but there are a couple issues yet to
-resolve. We hope to complete this design and put TeleMini v2.0 into production
-sometime in mid-2014.
projects / web / altusmetrum / commitdiff
