MDARS Tripoli Mojave Desert:35.1044666667:-117.795666667:http://www.mdars.info/
MDRA Higgs Farm:39.07854167:-75.87634583:http://www.mdrocketry.org
METRA Pine Island:41.31939:-74.47077:http://metrarocketclub.org
+MMMMSC Tuckahoe Turf Farms:43.318945:-70.892135:http://mmmsclub.org/
Mojave Desert Advanced Rocket Society:35.10472:-117.79444:http://www.mojavedesertrocketry.org/
NCR Atlas Site:40.65:-104.38333:http://ncrocketry.org
NCR Pawnee North Site:40.885955:-104.63793:http://ncrocketry.org
SEARS Samson, AL:31.118849:-86.091031:http://www.sears572.com
SRA Rocket Ranch:27.943333333333333:-80.716666666666667:http://www.spaceportrocketry.org/
St. Louis Rocketry Elsberry, MO:39.160217:-90.763356:http://stlouisrocketry.com/
+SystemsGO South, Houston, TX:29.562952777777778:-94.731458333333333:http://www.systemsgo.org/
THOR / Tripoli Nebrask (Jansen):40.150556:-97.032222:http://www.nerocketry.org/history.html
Torrey Farms of Potter, NY:42.7008967:-77.183656:http://urrg.org/
TRAAU Serpentine:-36.4823466:144.0180150:http://traau.com/
[AltOS Git Repository](http://git.gag.com/?p=fw/altos;a=summary)
+[ChaosKey Firmware version 1.6.7](v1.0/chaoskey-v1.0-1.6.7.elf)
+
+[ChaosKey Boot Loader version 1.6.7](v1.0/chaoskey-v1.0-altos-flash-1.6.7.elf)
+
Hardware designs using [gEDA](http://www.geda-project.org/) are
available here:
[ChaosKey Hardware Design Files](http://git.gag.com/?p=hw/chaoskey;a=summary)
+
## Version 0.3 ##
This one uses the better noise source coupled with an op amp that
This is a very small, baro-only recording dual-deploy altimeter for
model rocketry with integrated telemetry link.
-Production units are available from the
-[Garbee and Garbee](http://auric.gag.com) web
-store. TeleMini starter kits are also available from
-[Apogee Components](http://www.apogeerockets.com/Altus_Metrum_telemini.asp).
+Version 3.0 is in production now and should be available after April
+1, 2017.
+
+Production units will be available from the [Garbee and
+Garbee](http://shop.gag.com) web store.
For the latest TeleMini firmware and related ground station software, please
visit the [AltOS](../AltOS) page on this site.
-These are photos of our current production version:
+Here's a photo of a v3.0 prototype:
-<a href="v1.0/telemini_top.jpg"> <img src="v1.0/telemini_top_thumb.jpg"></a>
-<a href="v1.0/telemini_bottom.jpg"> <img src="v1.0/telemini_bottom_thumb.jpg"></a>
+<a href="v3.0/telemini-v3.0.jpg"> <img src="v3.0/telemini-v3.0-640.jpg"></a>
## Features ##
* Recording altimeter for model rocketry
* Supports dual deployment (can fire 2 ejection charges)
* 70cm ham-band transceiver for telemetry downlink
-* Barometric pressure sensor good to 45k feet MSL
+* Barometric pressure sensor good to 100k feet MSL
* Designed to use a single LiPo rechargeable battery
-* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube
+* 512kB flight data storage
+* 1.7 x 0.5 inch board designed to fit inside 18mm airframe coupler tube
### Developer View ###
* Hardware Features
- * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
- * Sub-1Ghz transceiver
- * 8051 MCU
+ * [ST STM32F042G6](http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f0-series/stm32f0x2/stm32f042g6.html) system on chip
+ * ARM Cortex-M0 MCU
* 32k Flash
- * 4k RAM
+ * 6k RAM
* USB 2.0
- * 6 12-bit analog inputs (11 bits with single-ended sensors)
- * 2 channels of serial I/O
* digital I/O
- * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor
+ * [Measurement Specialties MS5607](http://www.te.com/usa-en/product-CAT-BLPS0035.html) pressure sensor
* Software Features
- * Written mostly in C with some 8051 assembler
- * Runs from on-chip flash, uses on-chip RAM, stores flight data to
- upper blocks of on-chip flash
+ * Written mostly in C with some ARM assembler
* Tools Used
* [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
* [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
* Licenses
* The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
- * The software is licensed [GPL version 2](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
+ * The software is licensed [GPL version 2 or later](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
+
+## Older Versions ##
+
+[Version 1.0](v1.0). Same width (0.5 inches), but doesn't have the
+rear two mounting holes so it's a bit shorter (1.5 inches instead of
+1.67 inches).
## Artifacts ##
[pdf](../AltOS/doc/altusmetrum.pdf) formats.
An outline of the board with drill hole locations is available in
-[pdf](../Documents/telemini-outline.pdf) format.
+[pdf](../Documents/telemini-v3-outline.pdf) format.
The hardware design files can be found on [git.gag.com](http://git.gag.com)
in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).
-For those who don't have ready access to the gEDA suite, here are pdf snapshots
-of the files for Production PCB version 1.0 in more easily readable form.
-
-* [schematic](v1.0/telemini.pdf)
-* [pcb artwork](v1.0/telemini.pcb.pdf)
-* [bill of materials](v1.0/partslist.csv)
-
--- /dev/null
+## Version 1.0 ##
+
+This is the original TeleMini using the CC1111 SoC and MP3H6115A
+analog barometric sensor.
+
+<a href="telemini_top.jpg"> <img src="telemini_top_thumb.jpg"></a>
+<a href="telemini_bottom.jpg"> <img src="telemini_bottom_thumb.jpg"></a>
+
+## Features ##
+
+### User View ###
+
+* Recording altimeter for model rocketry
+* Supports dual deployment (can fire 2 ejection charges)
+* 70cm ham-band transceiver for telemetry downlink
+* Barometric pressure sensor good to 45k feet MSL
+* Designed to use a single LiPo rechargeable battery
+* 4kB storage
+* 1.5 x 0.5 inch board designed to fit inside 18mm airframe coupler tube
+
+### Developer View ###
+
+* Hardware Features
+ * [TI CC1111F32](http://focus.ti.com/docs/prod/folders/print/cc1111f32.html) Low Power RF System-on-Chip
+ * Sub-1Ghz transceiver
+ * 8051 MCU
+ * 32k Flash
+ * 4k RAM
+ * USB 2.0
+ * 6 12-bit analog inputs (11 bits with single-ended sensors)
+ * 2 channels of serial I/O
+ * digital I/O
+ * [Freescale MP3H6115A](http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MP3H6115A6U) pressure sensor
+* Software Features
+ * Written mostly in C with some 8051 assembler
+ * Runs from on-chip flash, uses on-chip RAM, stores flight data to
+ upper blocks of on-chip flash
+* Tools Used
+ * [gEDA](http://www.gpleda.org/) for schematic capture and PCB layout
+ * [SDCC](http://sdcc.sourceforge.net/) compiler and source debugger
+* Licenses
+ * The hardware is licensed under the [TAPR](http://www.tapr.org) [Open Hardware License](http://www.tapr.org/ohl.html)
+ * The software is licensed [GPL version 2 or later](http://www.gnu.org/licenses/old-licenses/gpl-2.0.html)
+
+## Artifacts ##
+
+There is a single manual for TeleMini and all other Altus Metrum products,
+which is available in [html](../AltOS/doc/altusmetrum.html) and
+[pdf](../AltOS/doc/altusmetrum.pdf) formats.
+
+An outline of the board with drill hole locations is available in
+[pdf](../Documents/telemini-v1-outline.pdf) format.
+
+The hardware design files can be found on [git.gag.com](http://git.gag.com)
+in the project [hw/telemini](http://git.gag.com/?p=hw/telemini;a=summary).
--- /dev/null
+[[!map pages="TeleMini/v3.0/* and ! TeleMini/v3.0/*/*"]]
* New Zealand
* [Aerospace Education](http://www.rockets.co.nz)
+For ChaosKey, there is a distributor in Europe:
+
+ * [Vikings GmbH](https://store.vikings.net/libre-friendly-accessories)
+
# Products #
These products are available for purchase:
provides an interface between [MicroPeak](MicroPeak/) and USB to
download flight log data.
-* [ChaosKey](ChaosKey) is a USB-attached True Random Number Generator
+* [ChaosKey](ChaosKey/)
+is a true hardware random number generator that connects over USB.
The following product is available in limited quantity from time to time: