add new footprint for LT1963 on Fox IHU, have Makefile build recent footprints

diff --git a/packages/Makefile b/packages/Makefile
index 7e01bca79e0f9997b93a9758edd7a0e0b0369881..c5b283ddaa1bee1468b3b04c7fa22b48ecac3c6e 100644 (file)
--- a/packages/Makefile
+++ b/packages/Makefile
@@ -42,7 +42,9 @@ FOOTPRINTS= \
        ADXL78.fp \
        MOT1317.fp \
        mlp8-4x3.fp \
-       saw.fp
+       saw.fp \
+       cubesatshield.fp \
+       linear-s8.fp
 
 .5c.fp:
        nickle $*.5c > $@

diff --git a/packages/linear-s8.py b/packages/linear-s8.py
new file mode 100755 (executable)
index 0000000..4fda465
--- /dev/null
+++ b/packages/linear-s8.py
@@ -0,0 +1,85 @@
+#!/usr/bin/python
+# Copyright 2013 by Bdale Garbee <bdale@gag.com>.  GPLv2
+#
+# Program to emit PCB footprint for Linear Technologies S8 footprint,
+# which is used on parts like the LT1963A series.
+#
+
+# dimensions in inches from 1963aff.pdf 
+PinWidth = 0.030
+PinHeight = 0.045
+PinSpacing = 0.050
+RowSpacing = 0.160
+BodyWidth = 0.197
+BodyHeight = 0.157
+
+import sys
+
+# we're going to use the 1/100 of a mil fundamental unit form
+def mm2mils100( mm ):
+       return int( mm / 25.4 * 1000.0 * 100.0 + 0.5 )
+def inch2mils100( inch ):
+       return int( inch * 1000.0 * 100.0 + 0.5 )
+
+print '# author: Bdale Garbee'
+print '# email: bdale@gag.com'
+print '# dist-license: GPL 2'
+print '# use-license: unlimited'
+
+print 'Element[0x0 "MOT1317" "" "" 0 0 -10161 -12011 0 100 0x0]'
+print "("
+for pin in range (0,4):
+    print '   Pad[',\
+       inch2mils100((pin-1.5) * PinSpacing), \
+       inch2mils100(-(RowSpacing/2 + PinWidth/2)), \
+       inch2mils100((pin-1.5) * PinSpacing), \
+       inch2mils100(-(RowSpacing/2 + PinHeight - PinWidth/2)), \
+       inch2mils100(PinWidth), \
+       inch2mils100(PinSpacing - PinWidth), \
+       inch2mils100(PinWidth)+600, \
+       '"pin%i"' % (8 - pin), '"%i"' % (8 - pin), '0x0100]'
+
+    print '   Pad[',\
+       inch2mils100((pin-1.5) * PinSpacing), \
+       inch2mils100(RowSpacing/2 + PinWidth/2), \
+       inch2mils100((pin-1.5) * PinSpacing), \
+       inch2mils100(RowSpacing/2 + PinHeight - PinWidth/2), \
+       inch2mils100(PinWidth), \
+       inch2mils100(PinSpacing - PinWidth), \
+       inch2mils100(PinWidth)+600, \
+       '"pin%i"' % (1 + pin), '"%i"' % (1 + pin), '0x0100]'
+
+#print '   ElementLine[',\
+#      inch2mils100(-BodyHeight/2), \
+#      inch2mils100(-BodyWidth/2), \
+#      inch2mils100(-BodyHeight/2), \
+#      inch2mils100( BodyWidth/2), \
+#      '1000 ]'
+#
+#print '   ElementLine[',\
+#      inch2mils100(-BodyHeight/2), \
+#      inch2mils100( BodyWidth/2), \
+#      inch2mils100( BodyHeight/2), \
+#      inch2mils100( BodyWidth/2), \
+#      '1000 ]'
+#
+#print '   ElementLine[',\
+#      inch2mils100( BodyHeight/2), \
+#      inch2mils100( BodyWidth/2), \
+#      inch2mils100( BodyHeight/2), \
+#      inch2mils100(-BodyWidth/2), \
+#      '1000 ]'
+#
+#print '   ElementLine[',\
+#      inch2mils100( BodyHeight/2), \
+#      inch2mils100(-BodyWidth/2), \
+#      inch2mils100(-BodyHeight/2), \
+#      inch2mils100(-BodyWidth/2), \
+#      '1000 ]'
+
+print '   ElementArc[',\
+        inch2mils100(-1.5 * PinSpacing), \
+        inch2mils100(RowSpacing/3), \
+       '500 500 0 360 1000 ]'
+
+print ")"