doc: do not document commands that are already deprecated

The command 'ftdi_location' is deprecated and a TCL procedure is
in place to direct the user to the replacement command.
There is no need to document the deprecated command.

Remove 'ftdi_location' from the documentation.

Change-Id: Ia431c6b0e7444d3f3288c088429bfb47089ff1b5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6154
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 44dcbdb8a4f69b1a2aa8809dd3c35b7d8c5bb066..3523a222a95df67ddfd3f0e3a79fb8ec87fa4ab9 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2517,19 +2517,6 @@ If not specified, serial numbers are not considered.
 and are not restricted to containing only decimal digits.)
 @end deffn
 
-@deffn {Config Command} {ftdi_location} <bus>-<port>[.<port>]...
-@emph{DEPRECATED -- avoid using this.
-Use the command @ref{adapter_usb_location,,adapter usb location} instead.}
-
-Specifies the physical USB port of the adapter to use. The path
-roots at @var{bus} and walks down the physical ports, with each
-@var{port} option specifying a deeper level in the bus topology, the last
-@var{port} denoting where the target adapter is actually plugged.
-The USB bus topology can be queried with the command @emph{lsusb -t}.
-
-This command is only available if your libusb1 is at least version 1.0.16.
-@end deffn
-
 @deffn {Config Command} {ftdi_channel} channel
 Selects the channel of the FTDI device to use for MPSSE operations. Most
 adapters use the default, channel 0, but there are exceptions.