#define STLINK_DEBUG_APIV2_SWD_SET_FREQ 0x43
#define STLINK_DEBUG_APIV2_JTAG_SET_FREQ 0x44
+#define STLINK_DEBUG_APIV2_READMEM_16BIT 0x47
+#define STLINK_DEBUG_APIV2_WRITEMEM_16BIT 0x48
+
#define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00
#define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01
#define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02
return stlink_usb_get_rw_status(handle);
}
+/** */
+static int stlink_usb_read_mem16(void *handle, uint32_t addr, uint16_t len,
+ uint8_t *buffer)
+{
+ int res;
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ /* only supported by stlink/v2 and for firmware >= 26 */
+ if (h->jtag_api == STLINK_JTAG_API_V1 ||
+ (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26))
+ return ERROR_COMMAND_NOTFOUND;
+
+ /* data must be a multiple of 2 and half-word aligned */
+ if (len % 2 || addr % 2) {
+ LOG_DEBUG("Invalid data alignment");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
+
+ stlink_usb_init_buffer(handle, h->rx_ep, len);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READMEM_16BIT;
+ h_u32_to_le(h->cmdbuf+h->cmdidx, addr);
+ h->cmdidx += 4;
+ h_u16_to_le(h->cmdbuf+h->cmdidx, len);
+ h->cmdidx += 2;
+
+ res = stlink_usb_xfer(handle, h->databuf, len);
+
+ if (res != ERROR_OK)
+ return res;
+
+ memcpy(buffer, h->databuf, len);
+
+ return stlink_usb_get_rw_status(handle);
+}
+
+/** */
+static int stlink_usb_write_mem16(void *handle, uint32_t addr, uint16_t len,
+ const uint8_t *buffer)
+{
+ int res;
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ /* only supported by stlink/v2 and for firmware >= 26 */
+ if (h->jtag_api == STLINK_JTAG_API_V1 ||
+ (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26))
+ return ERROR_COMMAND_NOTFOUND;
+
+ /* data must be a multiple of 2 and half-word aligned */
+ if (len % 2 || addr % 2) {
+ LOG_DEBUG("Invalid data alignment");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
+
+ stlink_usb_init_buffer(handle, h->tx_ep, len);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEMEM_16BIT;
+ h_u32_to_le(h->cmdbuf+h->cmdidx, addr);
+ h->cmdidx += 4;
+ h_u16_to_le(h->cmdbuf+h->cmdidx, len);
+ h->cmdidx += 2;
+
+ res = stlink_usb_xfer(handle, buffer, len);
+
+ if (res != ERROR_OK)
+ return res;
+
+ return stlink_usb_get_rw_status(handle);
+}
+
/** */
static int stlink_usb_read_mem32(void *handle, uint32_t addr, uint16_t len,
uint8_t *buffer)
/* calculate byte count */
count *= size;
+ /* switch to 8 bit if stlink does not support 16 bit memory read */
+ if (size == 2 && (h->jtag_api == STLINK_JTAG_API_V1 ||
+ (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26)))
+ size = 1;
+
while (count) {
- bytes_remaining = (size == 4) ? \
+ bytes_remaining = (size != 1) ? \
stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8;
if (count < bytes_remaining)
if (retval != ERROR_OK)
return retval;
} else
- /* the stlink only supports 8/32bit memory read/writes
- * honour 32bit, all others will be handled as 8bit access */
- if (size == 4) {
-
- /* When in jtag mode the stlink uses the auto-increment functinality.
+ /*
+ * all stlink support 8/32bit memory read/writes and only from
+ * stlink V2J26 there is support for 16 bit memory read/write.
+ * Honour 32 bit and, if possible, 16 bit too. Otherwise, handle
+ * as 8bit access.
+ */
+ if (size != 1) {
+
+ /* When in jtag mode the stlink uses the auto-increment functionality.
* However it expects us to pass the data correctly, this includes
* alignment and any page boundaries. We already do this as part of the
* adi_v5 implementation, but the stlink is a hla adapter and so this
- * needs implementiong manually.
+ * needs implementing manually.
* currently this only affects jtag mode, according to ST they do single
* access in SWD mode - but this may change and so we do it for both modes */
/* we first need to check for any unaligned bytes */
- if (addr % 4) {
+ if (addr & (size - 1)) {
- uint32_t head_bytes = 4 - (addr % 4);
+ uint32_t head_bytes = size - (addr & (size - 1));
retval = stlink_usb_read_mem8(handle, addr, head_bytes, buffer);
if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
usleep((1<<retries++) * 1000);
bytes_remaining -= head_bytes;
}
- if (bytes_remaining % 4)
+ if (bytes_remaining & (size - 1))
retval = stlink_usb_read_mem(handle, addr, 1, bytes_remaining, buffer);
+ else if (size == 2)
+ retval = stlink_usb_read_mem16(handle, addr, bytes_remaining, buffer);
else
retval = stlink_usb_read_mem32(handle, addr, bytes_remaining, buffer);
} else
/* calculate byte count */
count *= size;
+ /* switch to 8 bit if stlink does not support 16 bit memory read */
+ if (size == 2 && (h->jtag_api == STLINK_JTAG_API_V1 ||
+ (h->jtag_api == STLINK_JTAG_API_V2 && h->version.jtag < 26)))
+ size = 1;
+
while (count) {
- bytes_remaining = (size == 4) ? \
+ bytes_remaining = (size != 1) ? \
stlink_max_block_size(h->max_mem_packet, addr) : STLINK_MAX_RW8;
if (count < bytes_remaining)
if (retval != ERROR_OK)
return retval;
} else
- /* the stlink only supports 8/32bit memory read/writes
- * honour 32bit, all others will be handled as 8bit access */
- if (size == 4) {
-
- /* When in jtag mode the stlink uses the auto-increment functinality.
+ /*
+ * all stlink support 8/32bit memory read/writes and only from
+ * stlink V2J26 there is support for 16 bit memory read/write.
+ * Honour 32 bit and, if possible, 16 bit too. Otherwise, handle
+ * as 8bit access.
+ */
+ if (size != 1) {
+
+ /* When in jtag mode the stlink uses the auto-increment functionality.
* However it expects us to pass the data correctly, this includes
* alignment and any page boundaries. We already do this as part of the
* adi_v5 implementation, but the stlink is a hla adapter and so this
- * needs implementiong manually.
+ * needs implementing manually.
* currently this only affects jtag mode, according to ST they do single
* access in SWD mode - but this may change and so we do it for both modes */
/* we first need to check for any unaligned bytes */
- if (addr % 4) {
+ if (addr & (size - 1)) {
- uint32_t head_bytes = 4 - (addr % 4);
+ uint32_t head_bytes = size - (addr & (size - 1));
retval = stlink_usb_write_mem8(handle, addr, head_bytes, buffer);
if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
usleep((1<<retries++) * 1000);
bytes_remaining -= head_bytes;
}
- if (bytes_remaining % 4)
+ if (bytes_remaining & (size - 1))
retval = stlink_usb_write_mem(handle, addr, 1, bytes_remaining, buffer);
+ else if (size == 2)
+ retval = stlink_usb_write_mem16(handle, addr, bytes_remaining, buffer);
else
retval = stlink_usb_write_mem32(handle, addr, bytes_remaining, buffer);
projects / fw / openocd / commitdiff