*got_data = 1;
return ERROR_OK;
}
-
+
FD_ZERO(&read_fds);
FD_SET(connection->fd, &read_fds);
-
+
tv.tv_sec = timeout_s;
tv.tv_usec = 0;
if (select(connection->fd + 1, &read_fds, NULL, NULL, &tv) == 0)
my_checksum += buffer[i];
#ifdef _DEBUG_GDB_IO_
- /*
+ /*
* At this point we should have nothing in the input queue from GDB,
* however sometimes '-' is sent even though we've already received
* an ACK (+) for everything we've sent off.
gdb_write(connection, buffer, len);
gdb_write(connection, local_buffer+1, 3);
}
-
+
if (gdb_con->noack_mode)
break;
-
+
if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
return retval;
gdb_con->busy = 1;
int retval = gdb_put_packet_inner(connection, buffer, len);
gdb_con->busy = 0;
+
+ /* we sent some data, reset timer for keep alive messages */
+ kept_alive();
+
return retval;
}
char checksum[3];
int character;
int retval;
-
+
gdb_connection_t *gdb_con = connection->priv;
my_checksum = 0;
int count = 0;
return retval;
checksum[1] = character;
checksum[2] = 0;
-
+
if (!noack)
{
*checksum_ok=(my_checksum == strtoul(checksum, NULL, 16));
}
-
+
return ERROR_OK;
}
static void gdb_frontend_halted(struct target_s *target, connection_t *connection)
{
gdb_connection_t *gdb_connection = connection->priv;
-
+
/* In the GDB protocol when we are stepping or coninuing execution,
* we have a lingering reply. Upon receiving a halted event
* when we have that lingering packet, we reply to the original
gdb_connection->closed = 0;
gdb_connection->busy = 0;
gdb_connection->noack_mode = 0;
-
+
/* send ACK to GDB for debug request */
gdb_write(connection, "+", 1);
command_set_output_handler(connection->cmd_ctx, gdb_output, connection);
/* we must remove all breakpoints registered to the target as a previous
- * GDB session could leave dangling breakpoints if e.g. communication
+ * GDB session could leave dangling breakpoints if e.g. communication
* timed out.
*/
breakpoint_clear_target(gdb_service->target);
watchpoint_clear_target(gdb_service->target);
-
+
/* register callback to be informed about target events */
target_register_event_callback(gdb_target_callback_event_handler, connection);
/* a gdb session just attached, try to put the target in halt mode.
- *
- * DANGER!!!!
- *
+ *
+ * DANGER!!!!
+ *
* If the halt fails(e.g. target needs a reset, JTAG communication not
* working, etc.), then the GDB connect will succeed as
* the get_gdb_reg_list() will lie and return a register list with
* dummy values.
- *
+ *
* This allows GDB monitor commands to be run from a GDB init script to
* initialize the target
- *
+ *
* Also, since the halt() is asynchronous target connect will be
* instantaneous and thus avoiding annoying timeout problems during
- * connect.
+ * connect.
*/
target_halt(gdb_service->target);
/* FIX!!!! could extended-remote work better here?
- *
+ *
* wait a tiny bit for halted state or we just continue. The
- * GDB register packet will then contain garbage
+ * GDB register packet will then contain garbage
*/
target_wait_state(gdb_service->target, TARGET_HALTED, 500);
-
+
/* remove the initial ACK from the incoming buffer */
if ((retval = gdb_get_char(connection, &initial_ack)) != ERROR_OK)
return retval;
- /* FIX!!!??? would we actually ever receive a + here???
+ /* FIX!!!??? would we actually ever receive a + here???
* Not observed.
*/
if (initial_ack != '+')
if (reg_list_size < reg_num)
{
LOG_ERROR("gdb requested a non-existing register");
- return ERROR_SERVER_REMOTE_CLOSED;
+ return ERROR_SERVER_REMOTE_CLOSED;
}
if (*separator != '=')
wp_type = WPT_READ;
else if (type == 4) /* access watchpoint */
wp_type = WPT_ACCESS;
-
+
if (gdb_breakpoint_override&&((bp_type==BKPT_SOFT)||(bp_type==BKPT_HARD)))
{
bp_type=gdb_breakpoint_override_type;
flash_bank_t *b1, *b2;
b1=*((flash_bank_t **)a);
b2=*((flash_bank_t **)b);
-
+
if (b1->base==b2->base)
{
return 0;
{
command_context_t *cmd_ctx = connection->cmd_ctx;
gdb_connection_t *gdb_connection = connection->priv;
-
+
if (strstr(packet, "qRcmd,"))
{
if (packet_size > 6)
length = strtoul(separator + 1, &separator, 16);
xml_printf(&retval, &xml, &pos, &size, "<memory-map>\n");
-
- /*
+
+ /*
sort banks in ascending order, we need to make non-flash memory be ram(or rather
read/write) by default for GDB.
GDB does not have a concept of non-cacheable read/write memory.
*/
flash_bank_t **banks=malloc(sizeof(flash_bank_t *)*flash_get_bank_count());
int i;
-
+
for (i=0; i<flash_get_bank_count(); i++)
{
p = get_flash_bank_by_num(i);
}
banks[i]=p;
}
-
+
qsort(banks, flash_get_bank_count(), sizeof(flash_bank_t *), compare_bank);
-
+
u32 ram_start=0;
for (i=0; i<flash_get_bank_count(); i++)
{
p = banks[i];
-
+
if (ram_start<p->base)
{
xml_printf(&retval, &xml, &pos, &size, "<memory type=\"ram\" start=\"0x%x\" length=\"0x%x\"/>\n",
ram_start, p->base-ram_start);
}
-
+
/* if device has uneven sector sizes, eg. str7, lpc
* we pass the smallest sector size to gdb memory map */
blocksize = gdb_calc_blocksize(p);
-
+
xml_printf(&retval, &xml, &pos, &size, "<memory type=\"flash\" start=\"0x%x\" length=\"0x%x\">\n" \
"<property name=\"blocksize\">0x%x</property>\n" \
"</memory>\n", \
p->base, p->size, blocksize);
- ram_start=p->base+p->size;
+ ram_start=p->base+p->size;
}
if (ram_start!=0)
{
/* a flash chip could be at the very end of the 32 bit address space, in which case
ram_start will be precisely 0 */
}
-
+
free(banks);
banks = NULL;
} else
{
/* We're running/stepping, in which case we can
- * forward log output until the target is halted
+ * forward log output until the target is halted
*/
gdb_connection_t *gdb_con = connection->priv;
gdb_con->frontend_state = TARGET_RUNNING;
if (retval!=ERROR_OK)
{
/* we'll never receive a halted condition... issue a false one.. */
- gdb_frontend_halted(target, connection);
+ gdb_frontend_halted(target, connection);
}
}
}
/* logging does not propagate the error, yet can set th gdb_con->closed flag */
if (gdb_con->closed)
return ERROR_SERVER_REMOTE_CLOSED;
-
+
/* we'll recover from any other errors(e.g. temporary timeouts, etc.) */
return ERROR_OK;
}
gdb_service = malloc(sizeof(gdb_service_t));
gdb_service->target = target;
- add_service("gdb", CONNECTION_GDB,
- gdb_port + target->target_number,
- 1, gdb_new_connection, gdb_input,
- gdb_connection_closed,
+ add_service("gdb", CONNECTION_GDB,
+ gdb_port + target->target_number,
+ 1, gdb_new_connection, gdb_input,
+ gdb_connection_closed,
gdb_service);
- LOG_DEBUG("gdb service for target %s at port %i",
- target->type->name,
+ LOG_DEBUG("gdb service for target %s at port %i",
+ target->type->name,
gdb_port + target->target_number);
target = target->next;
{
if (argc == 0)
{
-
+
} else if (argc==1)
{
gdb_breakpoint_override = 1;
{
LOG_USER("breakpoint type is not overriden");
}
-
+
return ERROR_OK;
}
projects / fw / openocd / commitdiff