and Barrie W. Jervis, Adison-Wesley, 1993. ISBN 0-201-54413-X.
'''
-import math
+import math, cmath
from gnuradio import gr
remez = gr.remez
## Builds a band pass filter.
# @param gain Filter gain in the passband (linear)
# @param Fs Sampling rate (sps)
-# @param freq1 End of stop band (in Hz)
-# @param freq2 Start of pass band (in Hz)
+# @param freq_sb1 End of stop band (in Hz)
+# @param freq_pb1 Start of pass band (in Hz)
+# @param freq_pb2 End of pass band (in Hz)
+# @param freq_sb2 Start of stop band (in Hz)
# @param passband_ripple_db Pass band ripple in dB (should be small, < 1)
# @param stopband_atten_db Stop band attenuation in dB (should be large, >= 60)
# @param nextra_taps Extra taps to use in the filter (default=2)
taps = gr.remez (n + nextra_taps, fo, ao, w, "bandpass")
return taps
+
+## Builds a band pass filter with complex taps by making an LPF and
+# spinning it up to the right center frequency
+# @param gain Filter gain in the passband (linear)
+# @param Fs Sampling rate (sps)
+# @param freq_sb1 End of stop band (in Hz)
+# @param freq_pb1 Start of pass band (in Hz)
+# @param freq_pb2 End of pass band (in Hz)
+# @param freq_sb2 Start of stop band (in Hz)
+# @param passband_ripple_db Pass band ripple in dB (should be small, < 1)
+# @param stopband_atten_db Stop band attenuation in dB (should be large, >= 60)
+# @param nextra_taps Extra taps to use in the filter (default=2)
+def complex_band_pass (gain, Fs, freq_sb1, freq_pb1, freq_pb2, freq_sb2,
+ passband_ripple_db, stopband_atten_db,
+ nextra_taps=2):
+ center_freq = (freq_pb2 + freq_pb1) / 2.0
+ lp_pb = (freq_pb2 - center_freq)/1.0
+ lp_sb = freq_sb2 - center_freq
+ lptaps = low_pass(gain, Fs, lp_pb, lp_sb, passband_ripple_db,
+ stopband_atten_db, nextra_taps)
+ spinner = [cmath.exp(2j*cmath.pi*center_freq/Fs*i) for i in xrange(len(lptaps))]
+ taps = [s*t for s,t in zip(spinner, lptaps)]
+ return taps
+
+
+## Builds a band reject filter
+# spinning it up to the right center frequency
+# @param gain Filter gain in the passband (linear)
+# @param Fs Sampling rate (sps)
+# @param freq_pb1 End of pass band (in Hz)
+# @param freq_sb1 Start of stop band (in Hz)
+# @param freq_sb2 End of stop band (in Hz)
+# @param freq_pb2 Start of pass band (in Hz)
+# @param passband_ripple_db Pass band ripple in dB (should be small, < 1)
+# @param stopband_atten_db Stop band attenuation in dB (should be large, >= 60)
+# @param nextra_taps Extra taps to use in the filter (default=2)
+def band_reject (gain, Fs, freq_pb1, freq_sb1, freq_sb2, freq_pb2,
+ passband_ripple_db, stopband_atten_db,
+ nextra_taps=2):
+ passband_dev = passband_ripple_to_dev (passband_ripple_db)
+ stopband_dev = stopband_atten_to_dev (stopband_atten_db)
+ desired_ampls = (gain, 0, gain)
+ desired_freqs = [freq_pb1, freq_sb1, freq_sb2, freq_pb2]
+ desired_ripple = [passband_dev, stopband_dev, passband_dev]
+ (n, fo, ao, w) = remezord (desired_freqs, desired_ampls,
+ desired_ripple, Fs)
+ # Make sure we use an odd number of taps
+ if((n+nextra_taps)%2 == 1):
+ n += 1
+ # The remezord typically under-estimates the filter order, so add 2 taps by default
+ taps = gr.remez (n + nextra_taps, fo, ao, w, "bandpass")
+ return taps
+
+
## Builds a high pass filter.
# @param gain Filter gain in the passband (linear)
# @param Fs Sampling rate (sps)
EXTRA_DIST = \
$(bin_SCRIPTS) \
- README.plot
+ README.plot \
+ pyqt_plot.ui \
+ pyqt_filter.ui
ourpythondir = $(grpythondir)
ourpython_PYTHON = \
- plot_data.py
+ plot_data.py \
+ pyqt_plot.py \
+ pyqt_filter.py
bin_SCRIPTS = \
gr_plot_char.py \
gr_plot_int.py \
gr_plot_iq.py \
gr_plot_short.py \
+ gr_plot_qt.py \
+ gr_filter_design.py \
lsusrp \
qr_fft.py \
usrp_fft.py \
usrp2_rx_cfile.py \
usrp2_siggen.py \
usrp2_siggen_gui.py
+
--- /dev/null
+#!/usr/bin/env python
+
+import sys, os
+from optparse import OptionParser
+from gnuradio import gr, blks2, eng_notation
+
+try:
+ import scipy
+ from scipy import fftpack
+except ImportError:
+ print "Please install SciPy to run this script (http://www.scipy.org/)"
+ raise SystemExit, 1
+
+try:
+ from PyQt4 import Qt, QtCore, QtGui
+except ImportError:
+ print "Please install PyQt4 to run this script (http://www.riverbankcomputing.co.uk/software/pyqt/download)"
+ raise SystemExit, 1
+
+try:
+ import PyQt4.Qwt5 as Qwt
+except ImportError:
+ print "Please install PyQwt5 to run this script (http://pyqwt.sourceforge.net/)"
+ raise SystemExit, 1
+
+try:
+ from pyqt_filter import Ui_MainWindow
+except ImportError:
+ print "Could not import from pyqt_filter. Please build with \"pyuic4 pyqt_filter.ui -o pyqt_filter.py\""
+ raise SystemExit, 1
+
+
+class gr_plot_filter(QtGui.QMainWindow):
+ def __init__(self, qapp, options):
+ QtGui.QWidget.__init__(self, None)
+ self.gui = Ui_MainWindow()
+ self.gui.setupUi(self)
+
+ self.connect(self.gui.filterTypeComboBox,
+ Qt.SIGNAL("currentIndexChanged(const QString&)"),
+ self.changed_filter_type)
+ self.connect(self.gui.filterDesignTypeComboBox,
+ Qt.SIGNAL("currentIndexChanged(const QString&)"),
+ self.changed_filter_design_type)
+
+ self.connect(self.gui.designButton,
+ Qt.SIGNAL("released()"),
+ self.design)
+
+ self.connect(self.gui.tabGroup,
+ Qt.SIGNAL("currentChanged(int)"),
+ self.tab_changed)
+
+ self.connect(self.gui.nfftEdit,
+ Qt.SIGNAL("textEdited(QString)"),
+ self.nfft_edit_changed)
+
+ self.gui.designButton.setShortcut(QtCore.Qt.Key_Return)
+
+ self.taps = []
+ self.fftdB = []
+ self.fftDeg = []
+ self.groupDelay = []
+ self.nfftpts = int(10000)
+ self.gui.nfftEdit.setText(Qt.QString("%1").arg(self.nfftpts))
+
+ self.firFilters = ("Low Pass", "Band Pass", "Complex Band Pass", "Band Notch",
+ "High Pass", "Root Raised Cosine", "Gaussian")
+ self.optFilters = ("Low Pass", "Band Pass", "Complex Band Pass",
+ "Band Notch", "High Pass")
+
+ self.set_windowed()
+
+ # Initialize to LPF
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.firlpfPage)
+
+ # Set Axis labels
+ self.gui.freqPlot.setAxisTitle(self.gui.freqPlot.xBottom,
+ "Frequency (Hz)")
+ self.gui.freqPlot.setAxisTitle(self.gui.freqPlot.yLeft,
+ "Magnitude (dB)")
+ self.gui.timePlot.setAxisTitle(self.gui.timePlot.xBottom,
+ "Tap number")
+ self.gui.timePlot.setAxisTitle(self.gui.timePlot.yLeft,
+ "Amplitude")
+ self.gui.phasePlot.setAxisTitle(self.gui.phasePlot.xBottom,
+ "Frequency (Hz)")
+ self.gui.phasePlot.setAxisTitle(self.gui.phasePlot.yLeft,
+ "Phase (Radians)")
+ self.gui.groupPlot.setAxisTitle(self.gui.groupPlot.xBottom,
+ "Frequency (Hz)")
+ self.gui.groupPlot.setAxisTitle(self.gui.groupPlot.yLeft,
+ "Delay (sec)")
+
+ # Set up plot curves
+ self.rcurve = Qwt.QwtPlotCurve("Real")
+ self.rcurve.attach(self.gui.timePlot)
+ self.icurve = Qwt.QwtPlotCurve("Imag")
+ self.icurve.attach(self.gui.timePlot)
+
+ self.freqcurve = Qwt.QwtPlotCurve("PSD")
+ self.freqcurve.attach(self.gui.freqPlot)
+
+ self.phasecurve = Qwt.QwtPlotCurve("Phase")
+ self.phasecurve.attach(self.gui.phasePlot)
+
+ self.groupcurve = Qwt.QwtPlotCurve("Group Delay")
+ self.groupcurve.attach(self.gui.groupPlot)
+
+ # Create zoom functionality for the plots
+ self.timeZoomer = Qwt.QwtPlotZoomer(self.gui.timePlot.xBottom,
+ self.gui.timePlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.timePlot.canvas())
+
+ self.freqZoomer = Qwt.QwtPlotZoomer(self.gui.freqPlot.xBottom,
+ self.gui.freqPlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.freqPlot.canvas())
+
+ self.phaseZoomer = Qwt.QwtPlotZoomer(self.gui.phasePlot.xBottom,
+ self.gui.phasePlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.phasePlot.canvas())
+
+ self.groupZoomer = Qwt.QwtPlotZoomer(self.gui.groupPlot.xBottom,
+ self.gui.groupPlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.groupPlot.canvas())
+
+ # Set up pen for colors and line width
+ blue = QtGui.qRgb(0x00, 0x00, 0xFF)
+ blueBrush = Qt.QBrush(Qt.QColor(blue))
+ red = QtGui.qRgb(0xFF, 0x00, 0x00)
+ redBrush = Qt.QBrush(Qt.QColor(red))
+ self.freqcurve.setPen(Qt.QPen(blueBrush, 2))
+ self.rcurve.setPen(Qt.QPen(blueBrush, 2))
+ self.icurve.setPen(Qt.QPen(redBrush, 2))
+ self.phasecurve.setPen(Qt.QPen(blueBrush, 2))
+ self.groupcurve.setPen(Qt.QPen(blueBrush, 2))
+
+ # Set up validators for edit boxes
+ self.intVal = Qt.QIntValidator(None)
+ self.dblVal = Qt.QDoubleValidator(None)
+ self.gui.nfftEdit.setValidator(self.intVal)
+ self.gui.sampleRateEdit.setValidator(self.dblVal)
+ self.gui.filterGainEdit.setValidator(self.dblVal)
+ self.gui.endofLpfPassBandEdit.setValidator(self.dblVal)
+ self.gui.startofLpfStopBandEdit.setValidator(self.dblVal)
+ self.gui.lpfStopBandAttenEdit.setValidator(self.dblVal)
+ self.gui.lpfPassBandRippleEdit.setValidator(self.dblVal)
+ self.gui.startofBpfPassBandEdit.setValidator(self.dblVal)
+ self.gui.endofBpfPassBandEdit.setValidator(self.dblVal)
+ self.gui.bpfTransitionEdit.setValidator(self.dblVal)
+ self.gui.bpfStopBandAttenEdit.setValidator(self.dblVal)
+ self.gui.bpfPassBandRippleEdit.setValidator(self.dblVal)
+ self.gui.startofBnfStopBandEdit.setValidator(self.dblVal)
+ self.gui.endofBnfStopBandEdit.setValidator(self.dblVal)
+ self.gui.bnfTransitionEdit.setValidator(self.dblVal)
+ self.gui.bnfStopBandAttenEdit.setValidator(self.dblVal)
+ self.gui.bnfPassBandRippleEdit.setValidator(self.dblVal)
+ self.gui.endofHpfStopBandEdit.setValidator(self.dblVal)
+ self.gui.startofHpfPassBandEdit.setValidator(self.dblVal)
+ self.gui.hpfStopBandAttenEdit.setValidator(self.dblVal)
+ self.gui.hpfPassBandRippleEdit.setValidator(self.dblVal)
+ self.gui.rrcSymbolRateEdit.setValidator(self.dblVal)
+ self.gui.rrcAlphaEdit.setValidator(self.dblVal)
+ self.gui.rrcNumTapsEdit.setValidator(self.dblVal)
+ self.gui.gausSymbolRateEdit.setValidator(self.dblVal)
+ self.gui.gausBTEdit.setValidator(self.dblVal)
+ self.gui.gausNumTapsEdit.setValidator(self.dblVal)
+
+ self.gui.nTapsEdit.setText("0")
+
+ self.filterWindows = {"Hamming Window" : gr.firdes.WIN_HAMMING,
+ "Hann Window" : gr.firdes.WIN_HANN,
+ "Blackman Window" : gr.firdes.WIN_BLACKMAN,
+ "Rectangular Window" : gr.firdes.WIN_RECTANGULAR,
+ "Kaiser Window" : gr.firdes.WIN_KAISER,
+ "Blackman-harris Window" : gr.firdes.WIN_BLACKMAN_hARRIS}
+
+ self.show()
+
+ def changed_filter_type(self, ftype):
+ strftype = str(ftype.toAscii())
+ if(ftype == "Low Pass"):
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.firlpfPage)
+ elif(ftype == "Band Pass"):
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.firbpfPage)
+ elif(ftype == "Complex Band Pass"):
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.firbpfPage)
+ elif(ftype == "Band Notch"):
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.firbnfPage)
+ elif(ftype == "High Pass"):
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.firhpfPage)
+ elif(ftype == "Root Raised Cosine"):
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.rrcPage)
+ elif(ftype == "Gaussian"):
+ self.gui.filterTypeWidget.setCurrentWidget(self.gui.gausPage)
+
+ self.design()
+
+ def changed_filter_design_type(self, design):
+ if(design == "Equiripple"):
+ self.set_equiripple()
+ else:
+ self.set_windowed()
+
+ self.design()
+
+ def set_equiripple(self):
+ # Stop sending the signal for this function
+ self.gui.filterTypeComboBox.blockSignals(True)
+
+ self.equiripple = True
+ self.gui.lpfPassBandRippleLabel.setVisible(True)
+ self.gui.lpfPassBandRippleEdit.setVisible(True)
+ self.gui.bpfPassBandRippleLabel.setVisible(True)
+ self.gui.bpfPassBandRippleEdit.setVisible(True)
+ self.gui.bnfPassBandRippleLabel.setVisible(True)
+ self.gui.bnfPassBandRippleEdit.setVisible(True)
+ self.gui.hpfPassBandRippleLabel.setVisible(True)
+ self.gui.hpfPassBandRippleEdit.setVisible(True)
+
+ # Save current type and repopulate the combo box for
+ # filters this window type can handle
+ currenttype = self.gui.filterTypeComboBox.currentText()
+ items = self.gui.filterTypeComboBox.count()
+ for i in xrange(items):
+ self.gui.filterTypeComboBox.removeItem(0)
+ self.gui.filterTypeComboBox.addItems(self.optFilters)
+
+ # If the last filter type was valid for this window type,
+ # go back to it; otherwise, reset
+ try:
+ index = self.optFilters.index(currenttype)
+ self.gui.filterTypeComboBox.setCurrentIndex(index)
+ except ValueError:
+ pass
+
+ # Tell gui its ok to start sending this signal again
+ self.gui.filterTypeComboBox.blockSignals(False)
+
+ def set_windowed(self):
+ # Stop sending the signal for this function
+ self.gui.filterTypeComboBox.blockSignals(True)
+
+ self.equiripple = False
+ self.gui.lpfPassBandRippleLabel.setVisible(False)
+ self.gui.lpfPassBandRippleEdit.setVisible(False)
+ self.gui.bpfPassBandRippleLabel.setVisible(False)
+ self.gui.bpfPassBandRippleEdit.setVisible(False)
+ self.gui.bnfPassBandRippleLabel.setVisible(False)
+ self.gui.bnfPassBandRippleEdit.setVisible(False)
+ self.gui.hpfPassBandRippleLabel.setVisible(False)
+ self.gui.hpfPassBandRippleEdit.setVisible(False)
+
+ # Save current type and repopulate the combo box for
+ # filters this window type can handle
+ currenttype = self.gui.filterTypeComboBox.currentText()
+ items = self.gui.filterTypeComboBox.count()
+ for i in xrange(items):
+ self.gui.filterTypeComboBox.removeItem(0)
+ self.gui.filterTypeComboBox.addItems(self.firFilters)
+
+ # If the last filter type was valid for this window type,
+ # go back to it; otherwise, reset
+ try:
+ index = self.optFilters.index(currenttype)
+ self.gui.filterTypeComboBox.setCurrentIndex(index)
+ except ValueError:
+ pass
+
+ # Tell gui its ok to start sending this signal again
+ self.gui.filterTypeComboBox.blockSignals(False)
+
+ def design(self):
+ ret = True
+ fs,r = self.gui.sampleRateEdit.text().toDouble()
+ ret = r and ret
+ gain,r = self.gui.filterGainEdit.text().toDouble()
+ ret = r and ret
+
+ if(ret):
+ winstr = str(self.gui.filterDesignTypeComboBox.currentText().toAscii())
+ ftype = str(self.gui.filterTypeComboBox.currentText().toAscii())
+
+ if(winstr == "Equiripple"):
+ designer = {"Low Pass" : self.design_opt_lpf,
+ "Band Pass" : self.design_opt_bpf,
+ "Complex Band Pass" : self.design_opt_cbpf,
+ "Band Notch" : self.design_opt_bnf,
+ "High Pass" : self.design_opt_hpf}
+ taps,r = designer[ftype](fs, gain)
+
+ else:
+ designer = {"Low Pass" : self.design_win_lpf,
+ "Band Pass" : self.design_win_bpf,
+ "Complex Band Pass" : self.design_win_cbpf,
+ "Band Notch" : self.design_win_bnf,
+ "High Pass" : self.design_win_hpf,
+ "Root Raised Cosine" : self.design_win_rrc,
+ "Gaussian" : self.design_win_gaus}
+ wintype = self.filterWindows[winstr]
+ taps,r = designer[ftype](fs, gain, wintype)
+
+ if(r):
+ self.taps = scipy.array(taps)
+ self.get_fft(fs, self.taps, self.nfftpts)
+ self.update_time_curves()
+ self.update_freq_curves()
+ self.update_phase_curves()
+ self.update_group_curves()
+
+ self.gui.nTapsEdit.setText(Qt.QString("%1").arg(self.taps.size))
+
+
+ # Filter design functions using a window
+ def design_win_lpf(self, fs, gain, wintype):
+ ret = True
+ pb,r = self.gui.endofLpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ sb,r = self.gui.startofLpfStopBandEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.lpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+
+ if(ret):
+ tb = sb - pb
+
+ taps = gr.firdes.low_pass_2(gain, fs, pb, tb,
+ atten, wintype)
+ return (taps, ret)
+ else:
+ return ([], ret)
+
+ def design_win_bpf(self, fs, gain, wintype):
+ ret = True
+ pb1,r = self.gui.startofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ pb2,r = self.gui.endofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ tb,r = self.gui.bpfTransitionEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.bpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ taps = gr.firdes.band_pass_2(gain, fs, pb1, pb2, tb,
+ atten, wintype)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_win_cbpf(self, fs, gain, wintype):
+ ret = True
+ pb1,r = self.gui.startofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ pb2,r = self.gui.endofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ tb,r = self.gui.bpfTransitionEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.bpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ taps = gr.firdes.complex_band_pass_2(gain, fs, pb1, pb2, tb,
+ atten, wintype)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_win_bnf(self, fs, gain, wintype):
+ ret = True
+ pb1,r = self.gui.startofBnfStopBandEdit.text().toDouble()
+ ret = r and ret
+ pb2,r = self.gui.endofBnfStopBandEdit.text().toDouble()
+ ret = r and ret
+ tb,r = self.gui.bnfTransitionEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.bnfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ taps = gr.firdes.band_reject_2(gain, fs, pb1, pb2, tb,
+ atten, wintype)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_win_hpf(self, fs, gain, wintype):
+ ret = True
+ sb,r = self.gui.endofHpfStopBandEdit.text().toDouble()
+ ret = r and ret
+ pb,r = self.gui.startofHpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.hpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ tb = pb - sb
+ taps = gr.firdes.high_pass_2(gain, fs, pb, tb,
+ atten, wintype)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_win_rrc(self, fs, gain, wintype):
+ ret = True
+ sr,r = self.gui.rrcSymbolRateEdit.text().toDouble()
+ ret = r and ret
+ alpha,r = self.gui.rrcAlphaEdit.text().toDouble()
+ ret = r and ret
+ ntaps,r = self.gui.rrcNumTapsEdit.text().toInt()
+ ret = r and ret
+
+ if(r):
+ taps = gr.firdes.root_raised_cosine(gain, fs, sr,
+ alpha, ntaps)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_win_gaus(self, fs, gain, wintype):
+ ret = True
+ sr,r = self.gui.gausSymbolRateEdit.text().toDouble()
+ ret = r and ret
+ bt,r = self.gui.gausBTEdit.text().toDouble()
+ ret = r and ret
+ ntaps,r = self.gui.gausNumTapsEdit.text().toInt()
+ ret = r and ret
+
+ if(r):
+ spb = fs / sr
+ taps = gr.firdes.gaussian(gain, spb, bt, ntaps)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ # Design Functions for Equiripple Filters
+ def design_opt_lpf(self, fs, gain):
+ ret = True
+ pb,r = self.gui.endofLpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ sb,r = self.gui.startofLpfStopBandEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.lpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+ ripple,r = self.gui.lpfPassBandRippleEdit.text().toDouble()
+ ret = r and ret
+
+ if(ret):
+ taps = blks2.optfir.low_pass(gain, fs, pb, sb,
+ ripple, atten)
+ return (taps, ret)
+ else:
+ return ([], ret)
+
+ def design_opt_bpf(self, fs, gain):
+ ret = True
+ pb1,r = self.gui.startofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ pb2,r = self.gui.endofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ tb,r = self.gui.bpfTransitionEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.bpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+ ripple,r = self.gui.bpfPassBandRippleEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ sb1 = pb1 - tb
+ sb2 = pb2 + tb
+ taps = blks2.optfir.band_pass(gain, fs, sb1, pb1, pb2, sb2,
+ ripple, atten)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_opt_cbpf(self, fs, gain):
+ ret = True
+ pb1,r = self.gui.startofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ pb2,r = self.gui.endofBpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ tb,r = self.gui.bpfTransitionEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.bpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+ ripple,r = self.gui.bpfPassBandRippleEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ sb1 = pb1 - tb
+ sb2 = pb2 + tb
+ taps = blks2.optfir.complex_band_pass(gain, fs, sb1, pb1, pb2, sb2,
+ ripple, atten)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_opt_bnf(self, fs, gain):
+ ret = True
+ sb1,r = self.gui.startofBnfStopBandEdit.text().toDouble()
+ ret = r and ret
+ sb2,r = self.gui.endofBnfStopBandEdit.text().toDouble()
+ ret = r and ret
+ tb,r = self.gui.bnfTransitionEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.bnfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+ ripple,r = self.gui.bnfPassBandRippleEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ pb1 = sb1 - tb
+ pb2 = sb2 + tb
+ taps = blks2.optfir.band_reject(gain, fs, pb1, sb1, sb2, pb2,
+ ripple, atten)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def design_opt_hpf(self, fs, gain):
+ ret = True
+ sb,r = self.gui.endofHpfStopBandEdit.text().toDouble()
+ ret = r and ret
+ pb,r = self.gui.startofHpfPassBandEdit.text().toDouble()
+ ret = r and ret
+ atten,r = self.gui.hpfStopBandAttenEdit.text().toDouble()
+ ret = r and ret
+ ripple,r = self.gui.hpfPassBandRippleEdit.text().toDouble()
+ ret = r and ret
+
+ if(r):
+ taps = blks2.optfir.high_pass(gain, fs, sb, pb,
+ atten, ripple)
+ return (taps,r)
+ else:
+ return ([],r)
+
+ def nfft_edit_changed(self, nfft):
+ infft,r = nfft.toInt()
+ if(r and (infft != self.nfftpts)):
+ self.nfftpts = infft
+ self.update_freq_curves()
+
+ def tab_changed(self, tab):
+ if(tab == 0):
+ self.update_freq_curves()
+ if(tab == 1):
+ self.update_time_curves()
+ if(tab == 2):
+ self.update_phase_curves()
+ if(tab == 3):
+ self.update_group_curves()
+
+ def get_fft(self, fs, taps, Npts):
+ Ts = 1.0/fs
+ fftpts = fftpack.fft(taps, Npts)
+ self.freq = scipy.arange(0, fs, 1.0/(Npts*Ts))
+ self.fftdB = 20.0*scipy.log10(abs(fftpts))
+ self.fftDeg = scipy.unwrap(scipy.angle(fftpts))
+ self.groupDelay = -scipy.diff(self.fftDeg)
+
+ def update_time_curves(self):
+ ntaps = len(self.taps)
+ if(ntaps > 0):
+ if(type(self.taps[0]) == scipy.complex128):
+ self.rcurve.setData(scipy.arange(ntaps), self.taps.real)
+ self.icurve.setData(scipy.arange(ntaps), self.taps.imag)
+ else:
+ self.rcurve.setData(scipy.arange(ntaps), self.taps)
+
+ # Reset the x-axis to the new time scale
+ ymax = 1.5 * max(self.taps)
+ ymin = 1.5 * min(self.taps)
+ self.gui.timePlot.setAxisScale(self.gui.timePlot.xBottom,
+ 0, ntaps)
+ self.gui.timePlot.setAxisScale(self.gui.timePlot.yLeft,
+ ymin, ymax)
+
+ # Set the zoomer base to unzoom to the new axis
+ self.timeZoomer.setZoomBase()
+
+ self.gui.timePlot.replot()
+
+ def update_freq_curves(self):
+ npts = len(self.fftdB)
+ if(npts > 0):
+ self.freqcurve.setData(self.freq, self.fftdB)
+
+ # Reset the x-axis to the new time scale
+ ymax = 1.5 * max(self.fftdB[0:npts/2])
+ ymin = 1.1 * min(self.fftdB[0:npts/2])
+ xmax = self.freq[npts/2]
+ xmin = self.freq[0]
+ self.gui.freqPlot.setAxisScale(self.gui.freqPlot.xBottom,
+ xmin, xmax)
+ self.gui.freqPlot.setAxisScale(self.gui.freqPlot.yLeft,
+ ymin, ymax)
+
+ # Set the zoomer base to unzoom to the new axis
+ self.freqZoomer.setZoomBase()
+
+ self.gui.freqPlot.replot()
+
+
+ def update_phase_curves(self):
+ npts = len(self.fftDeg)
+ if(npts > 0):
+ self.phasecurve.setData(self.freq, self.fftDeg)
+
+ # Reset the x-axis to the new time scale
+ ymax = 1.5 * max(self.fftDeg[0:npts/2])
+ ymin = 1.1 * min(self.fftDeg[0:npts/2])
+ xmax = self.freq[npts/2]
+ xmin = self.freq[0]
+ self.gui.phasePlot.setAxisScale(self.gui.phasePlot.xBottom,
+ xmin, xmax)
+ self.gui.phasePlot.setAxisScale(self.gui.phasePlot.yLeft,
+ ymin, ymax)
+
+ # Set the zoomer base to unzoom to the new axis
+ self.phaseZoomer.setZoomBase()
+
+ self.gui.phasePlot.replot()
+
+ def update_group_curves(self):
+ npts = len(self.groupDelay)
+ if(npts > 0):
+ self.groupcurve.setData(self.freq, self.groupDelay)
+
+ # Reset the x-axis to the new time scale
+ ymax = 1.5 * max(self.groupDelay[0:npts/2])
+ ymin = 1.1 * min(self.groupDelay[0:npts/2])
+ xmax = self.freq[npts/2]
+ xmin = self.freq[0]
+ self.gui.groupPlot.setAxisScale(self.gui.groupPlot.xBottom,
+ xmin, xmax)
+ self.gui.groupPlot.setAxisScale(self.gui.groupPlot.yLeft,
+ ymin, ymax)
+
+ # Set the zoomer base to unzoom to the new axis
+ self.groupZoomer.setZoomBase()
+
+ self.gui.groupPlot.replot()
+
+
+def setup_options():
+ usage="%prog: [options] (input_filename)"
+ description = ""
+
+ parser = OptionParser(conflict_handler="resolve",
+ usage=usage, description=description)
+ return parser
+
+def main(args):
+ parser = setup_options()
+ (options, args) = parser.parse_args ()
+
+ app = Qt.QApplication(args)
+ gplt = gr_plot_filter(app, options)
+ app.exec_()
+
+if __name__ == '__main__':
+ main(sys.argv)
+
--- /dev/null
+#!/usr/bin/env python
+
+try:
+ import scipy
+ from scipy import fftpack
+except ImportError:
+ print "Please install SciPy to run this script (http://www.scipy.org/)"
+ raise SystemExit, 1
+
+import sys, os
+from PyQt4 import Qt, QtCore, QtGui
+import PyQt4.Qwt5 as Qwt
+from matplotlib import mlab
+from optparse import OptionParser
+from gnuradio import eng_notation
+
+from pyqt_plot import Ui_MainWindow
+
+class SpectrogramData(Qwt.QwtRasterData):
+
+ def __init__(self, f, t):
+ Qwt.QwtArrayData.__init__(self, Qt.QRectF(0, 0, 0, 0))
+ self.sp = scipy.array([[0], [0]])
+
+ def set_data(self, xfreq, ytime, data):
+ self.sp = data
+ self.freq = xfreq
+ self.time = ytime
+ boundingBox = Qt.QRectF(self.freq.min(), self.time.min(),
+ self.freq.max() - self.freq.min(),
+ self.time.max() - self.time.min())
+ self.setBoundingRect(boundingBox)
+
+ def rasterHint(self, rect):
+ return Qt.QSize(self.sp.shape[0], self.sp.shape[1])
+
+ def copy(self):
+ return self
+
+ def range(self):
+
+ return Qwt.QwtDoubleInterval(self.sp.min(), self.sp.max())
+
+ def value(self, x, y):
+ f = int(self.freq.searchsorted(x))
+ t = int(self.time.searchsorted(y))
+ return self.sp[f][t-1]
+
+
+class gr_plot_qt(QtGui.QMainWindow):
+ def __init__(self, qapp, filename, options, parent=None):
+ QtGui.QWidget.__init__(self, parent)
+ self.gui = Ui_MainWindow()
+ self.gui.setupUi(self)
+
+ self.block_length = options.block_length
+ self.start = options.start
+ self.sample_rate = options.sample_rate
+ self.psdfftsize = options.psd_size
+ self.specfftsize = options.spec_size
+ self.winfunc = scipy.blackman
+ self.sizeof_data = 8
+ self.datatype = scipy.complex64
+ self.iq = list()
+ self.time = list()
+
+ # Set up basic plot attributes
+ self.gui.timePlot.setAxisTitle(self.gui.timePlot.xBottom, "Time (sec)")
+ self.gui.timePlot.setAxisTitle(self.gui.timePlot.yLeft, "Amplitude (V)")
+ self.gui.freqPlot.setAxisTitle(self.gui.freqPlot.xBottom, "Frequency (Hz)")
+ self.gui.freqPlot.setAxisTitle(self.gui.freqPlot.yLeft, "Magnitude (dB)")
+ self.gui.specPlot.setAxisTitle(self.gui.specPlot.xBottom, "Frequency (Hz)")
+ self.gui.specPlot.setAxisTitle(self.gui.specPlot.yLeft, "Time (sec)")
+
+ # Set up FFT size combo box
+ self.fftsizes = ["128", "256", "512", "1024", "2048",
+ "4096", "8192", "16384", "32768"]
+ self.gui.psdFFTComboBox.addItems(self.fftsizes)
+ self.gui.specFFTComboBox.addItems(self.fftsizes)
+ pos = self.gui.psdFFTComboBox.findText(Qt.QString("%1").arg(self.psdfftsize))
+ self.gui.psdFFTComboBox.setCurrentIndex(pos)
+ pos = self.gui.specFFTComboBox.findText(Qt.QString("%1").arg(self.specfftsize))
+ self.gui.specFFTComboBox.setCurrentIndex(pos)
+
+ self.connect(self.gui.psdFFTComboBox,
+ Qt.SIGNAL("activated (const QString&)"),
+ self.psdFFTComboBoxEdit)
+ self.connect(self.gui.specFFTComboBox,
+ Qt.SIGNAL("activated (const QString&)"),
+ self.specFFTComboBoxEdit)
+
+ # Set up color scheme box
+ self.color_modes = {"Black on White" : self.color_black_on_white,
+ "White on Black" : self.color_white_on_black,
+ "Blue on Black" : self.color_blue_on_black,
+ "Green on Black" : self.color_green_on_black}
+ self.gui.colorComboBox.addItems(self.color_modes.keys())
+ pos = self.gui.colorComboBox.findText("Blue on Black")
+ self.gui.colorComboBox.setCurrentIndex(pos)
+ self.connect(self.gui.colorComboBox,
+ Qt.SIGNAL("activated (const QString&)"),
+ self.colorComboBoxEdit)
+
+
+ # Create zoom functionality for the plots
+ self.timeZoomer = Qwt.QwtPlotZoomer(self.gui.timePlot.xBottom,
+ self.gui.timePlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.timePlot.canvas())
+
+ self.freqZoomer = Qwt.QwtPlotZoomer(self.gui.freqPlot.xBottom,
+ self.gui.freqPlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.freqPlot.canvas())
+
+ self.specZoomer = Qwt.QwtPlotZoomer(self.gui.specPlot.xBottom,
+ self.gui.specPlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.specPlot.canvas())
+
+ self.picker = Qwt.QwtPlotPicker(self.gui.timePlot.xBottom,
+ self.gui.timePlot.yLeft,
+ Qwt.QwtPicker.PointSelection,
+ Qwt.QwtPlotPicker.CrossRubberBand,
+ Qwt.QwtPicker.AlwaysOn,
+ self.gui.timePlot.canvas())
+ self.picker.connect(self.picker,
+ Qt.SIGNAL('selected(const QwtDoublePoint&)'),
+ self.clickMe)
+
+ # Set up action when tab is changed
+ self.connect(self.gui.tabGroup,
+ Qt.SIGNAL("currentChanged (int)"),
+ self.tabChanged)
+
+ # Add a legend to the Time plot
+ legend_real = Qwt.QwtLegend()
+ self.gui.timePlot.insertLegend(legend_real)
+
+ # Set up slider
+ self.gui.plotHBar.setSingleStep(1)
+ self.gui.plotHBar.setPageStep(self.block_length)
+ self.gui.plotHBar.setMinimum(0)
+ self.gui.plotHBar.setMaximum(self.block_length)
+ self.connect(self.gui.plotHBar,
+ Qt.SIGNAL("valueChanged(int)"),
+ self.sliderMoved)
+
+ # Connect Open action to Open Dialog box
+ self.connect(self.gui.action_open,
+ Qt.SIGNAL("activated()"),
+ self.open_file)
+
+ # Set up file position boxes to update current figure
+ self.connect(self.gui.filePosStartLineEdit,
+ Qt.SIGNAL("editingFinished()"),
+ self.file_position_changed)
+ self.connect(self.gui.filePosStopLineEdit,
+ Qt.SIGNAL("editingFinished()"),
+ self.file_position_changed)
+ self.connect(self.gui.filePosLengthLineEdit,
+ Qt.SIGNAL("editingFinished()"),
+ self.file_length_changed)
+
+ self.connect(self.gui.fileTimeStartLineEdit,
+ Qt.SIGNAL("editingFinished()"),
+ self.file_time_changed)
+ self.connect(self.gui.fileTimeStopLineEdit,
+ Qt.SIGNAL("editingFinished()"),
+ self.file_time_changed)
+ self.connect(self.gui.fileTimeLengthLineEdit,
+ Qt.SIGNAL("editingFinished()"),
+ self.file_time_length_changed)
+
+ self.rcurve = Qwt.QwtPlotCurve("Real")
+ self.icurve = Qwt.QwtPlotCurve("Imaginary")
+
+ self.icurve.attach(self.gui.timePlot)
+ self.rcurve.attach(self.gui.timePlot)
+
+ self.psdcurve = Qwt.QwtPlotCurve("PSD")
+ self.psdcurve.attach(self.gui.freqPlot)
+
+ # Set up specTab plot as a spectrogram
+ self.specdata = SpectrogramData(range(0, 10), range(0, 10))
+
+ colorMap = Qwt.QwtLinearColorMap(Qt.Qt.darkCyan, Qt.Qt.red)
+ colorMap.addColorStop(0.1, Qt.Qt.cyan)
+ colorMap.addColorStop(0.6, Qt.Qt.green)
+ colorMap.addColorStop(0.95, Qt.Qt.yellow)
+
+ self.spec = Qwt.QwtPlotSpectrogram()
+ self.spec.setColorMap(colorMap)
+ self.spec.attach(self.gui.specPlot)
+ self.spec.setDisplayMode(Qwt.QwtPlotSpectrogram.ImageMode, True)
+ self.spec.setData(self.specdata)
+
+ self.rightAxis = self.gui.specPlot.axisWidget(Qwt.QwtPlot.yRight)
+ self.rightAxis.setTitle("Magnitude (dBm)")
+ self.rightAxis.setColorBarEnabled(True)
+ self.rightAxis.setColorMap(self.spec.data().range(),
+ self.spec.colorMap())
+ self.gui.specPlot.enableAxis(Qwt.QwtPlot.yRight)
+
+ # Set up initial color scheme
+ self.color_modes["Blue on Black"]()
+
+ # Connect a signal for when the sample rate changes
+ self.set_sample_rate(self.sample_rate)
+ self.connect(self.gui.sampleRateLineEdit,
+ Qt.SIGNAL("editingFinished()"),
+ self.sample_rate_changed)
+
+ if(filename is not None):
+ self.initialize(filename)
+
+ self.show()
+
+ def open_file(self):
+ filename = Qt.QFileDialog.getOpenFileName(self, "Open", ".")
+ if(filename != ""):
+ print filename
+ self.initialize(filename)
+
+ def initialize(self, filename):
+ self.hfile = open(filename, "r")
+
+ self.setWindowTitle(("GNU Radio File Plot Utility: %s" % filename))
+
+ self.gui.filePosStartLineEdit.setText("0")
+ self.gui.filePosStopLineEdit.setText("0")
+ self.gui.fileTimeStartLineEdit.setText("0")
+ self.gui.fileTimeStopLineEdit.setText("0")
+
+ self.cur_start = 0
+ self.cur_stop = self.block_length
+
+ self.init_data_input()
+ self.get_data(self.cur_start, self.cur_stop)
+ self.get_psd()
+ self.get_specgram()
+ self.gui.plotHBar.setSliderPosition(0)
+ self.gui.plotHBar.setMaximum(self.signal_size)
+
+
+ self.update_time_curves()
+ self.update_psd_curves()
+ self.update_specgram_curves()
+
+ def init_data_input(self):
+ self.hfile.seek(0, os.SEEK_END)
+ self.signal_size = self.hfile.tell()/self.sizeof_data
+ print "Sizeof File: ", self.signal_size
+ self.hfile.seek(0, os.SEEK_SET)
+
+ def get_data(self, start, end):
+ if(end > start):
+ self.hfile.seek(start*self.sizeof_data, os.SEEK_SET)
+ self.position = start
+ try:
+ iq = scipy.fromfile(self.hfile, dtype=self.datatype,
+ count=end-start)
+
+ if(len(iq) < (end-start)):
+ end = len(iq)
+ self.gui.filePosLengthLineEdit.setText(Qt.QString("%1").arg(end))
+ self.gui.plotHBar.setMaximum(end)
+ self.gui.plotHBar.setSingleStep(end)
+ self.file_length_changed()
+
+ tstep = 1.0 / self.sample_rate
+ self.iq = iq
+ self.time = [tstep*(self.position + i) for i in xrange(len(self.iq))]
+
+ self.set_file_pos_box(start, end)
+ except MemoryError:
+ pass
+ else:
+ # Do we want to do anything about this?
+ pass
+
+ def get_psd(self):
+ winpoints = self.winfunc(self.psdfftsize)
+ iq_psd, freq = mlab.psd(self.iq, Fs=self.sample_rate,
+ NFFT=self.psdfftsize,
+ noverlap=self.psdfftsize/4.0,
+ window=winpoints,
+ scale_by_freq=False)
+
+ self.iq_psd = 10.0*scipy.log10(abs(fftpack.fftshift(iq_psd)))
+ self.freq = freq - self.sample_rate/2.0
+
+ def get_specgram(self):
+ winpoints = self.winfunc(self.specfftsize)
+ iq_spec, f, t = mlab.specgram(self.iq, Fs=self.sample_rate,
+ NFFT=self.specfftsize,
+ noverlap=self.specfftsize/4.0,
+ window=winpoints,
+ scale_by_freq=False)
+
+ self.iq_spec = 10.0*scipy.log10(abs(iq_spec))
+ self.spec_f = f
+ self.spec_t = t
+
+ def clickMe(self, qPoint):
+ print qPoint.x()
+
+ def psdFFTComboBoxEdit(self, fftSize):
+ self.psdfftsize = fftSize.toInt()[0]
+ self.get_psd()
+ self.update_psd_curves()
+
+ def specFFTComboBoxEdit(self, fftSize):
+ self.specfftsize = fftSize.toInt()[0]
+ self.get_specgram()
+ self.update_specgram_curves()
+
+ def colorComboBoxEdit(self, colorSelection):
+ colorstr = str(colorSelection.toAscii())
+ color_func = self.color_modes[colorstr]
+ color_func()
+
+ def sliderMoved(self, value):
+ pos_start = value
+ pos_end = value + self.gui.plotHBar.pageStep()
+
+ self.get_data(pos_start, pos_end)
+ self.get_psd()
+ self.get_specgram()
+ self.update_time_curves()
+ self.update_psd_curves()
+ self.update_specgram_curves()
+
+ def set_sample_rate(self, sr):
+ self.sample_rate = sr
+ srstr = eng_notation.num_to_str(self.sample_rate)
+ self.gui.sampleRateLineEdit.setText(Qt.QString("%1").arg(srstr))
+
+ def sample_rate_changed(self):
+ srstr = self.gui.sampleRateLineEdit.text().toAscii()
+ self.sample_rate = eng_notation.str_to_num(srstr)
+ self.set_file_pos_box(self.cur_start, self.cur_stop)
+ self.get_data(self.cur_start, self.cur_stop)
+ self.get_psd()
+ self.get_specgram()
+ self.update_time_curves()
+ self.update_psd_curves()
+ self.update_specgram_curves()
+
+ def set_file_pos_box(self, start, end):
+ tstart = start / self.sample_rate
+ tend = end / self.sample_rate
+
+ self.gui.filePosStartLineEdit.setText(Qt.QString("%1").arg(start))
+ self.gui.filePosStopLineEdit.setText(Qt.QString("%1").arg(end))
+ self.gui.filePosLengthLineEdit.setText(Qt.QString("%1").arg(end-start))
+
+ self.gui.fileTimeStartLineEdit.setText(Qt.QString("%1").arg(tstart))
+ self.gui.fileTimeStopLineEdit.setText(Qt.QString("%1").arg(tend))
+ self.gui.fileTimeLengthLineEdit.setText(Qt.QString("%1").arg(tend-tstart))
+
+ def file_position_changed(self):
+ start = self.gui.filePosStartLineEdit.text().toInt()
+ end = self.gui.filePosStopLineEdit.text().toInt()
+ if((start[1] == True) and (end[1] == True)):
+ self.cur_start = start[0]
+ self.cur_stop = end[0]
+
+ tstart = self.cur_start / self.sample_rate
+ tend = self.cur_stop / self.sample_rate
+ self.gui.fileTimeStartLineEdit.setText(Qt.QString("%1").arg(tstart))
+ self.gui.fileTimeStopLineEdit.setText(Qt.QString("%1").arg(tend))
+
+ self.get_data(self.cur_start, self.cur_stop)
+
+ self.update_time_curves()
+ self.update_psd_curves()
+ self.update_specgram_curves()
+
+ # If there's a non-digit character, reset box
+ else:
+ self.set_file_pos_box(self.cur_start, self.cur_stop)
+
+ def file_time_changed(self):
+ tstart = self.gui.fileTimeStartLineEdit.text().toDouble()
+ tstop = self.gui.fileTimeStopLineEdit.text().toDouble()
+ if((tstart[1] == True) and (tstop[1] == True)):
+ self.cur_start = int(tstart[0] * self.sample_rate)
+ self.cur_stop = int(tstop[0] * self.sample_rate)
+ self.get_data(self.cur_start, self.cur_stop)
+
+ self.gui.filePosStartLineEdit.setText(Qt.QString("%1").arg(self.cur_start))
+ self.gui.filePosStopLineEdit.setText(Qt.QString("%1").arg(self.cur_stop))
+
+ self.update_time_curves()
+ self.update_psd_curves()
+ self.update_specgram_curves()
+ # If there's a non-digit character, reset box
+ else:
+ self.set_file_pos_box(self.cur_start, self.cur_stop)
+
+ def file_length_changed(self):
+ start = self.gui.filePosStartLineEdit.text().toInt()
+ length = self.gui.filePosLengthLineEdit.text().toInt()
+
+ if((start[1] == True) and (length[1] == True)):
+ self.cur_start = start[0]
+ self.block_length = length[0]
+ self.cur_stop = self.cur_start + self.block_length
+
+ tstart = self.cur_start / self.sample_rate
+ tend = self.cur_stop / self.sample_rate
+ tlen = self.block_length / self.sample_rate
+ self.gui.fileTimeStartLineEdit.setText(Qt.QString("%1").arg(tstart))
+ self.gui.fileTimeStopLineEdit.setText(Qt.QString("%1").arg(tend))
+ self.gui.fileTimeLengthLineEdit.setText(Qt.QString("%1").arg(tlen))
+
+ self.gui.plotHBar.setPageStep(self.block_length)
+
+ self.get_data(self.cur_start, self.cur_stop)
+ self.get_psd()
+ self.get_specgram()
+
+ self.update_time_curves()
+ self.update_psd_curves()
+ self.update_specgram_curves()
+ # If there's a non-digit character, reset box
+ else:
+ self.set_file_pos_box(self.cur_start, self.cur_stop)
+
+ def file_time_length_changed(self):
+ tstart = self.gui.fileTimeStartLineEdit.text().toDouble()
+ tlength = self.gui.fileTimeLengthLineEdit.text().toDouble()
+ if((tstart[1] == True) and (tlength[1] == True)):
+ self.cur_start = int(tstart[0] * self.sample_rate)
+ self.block_length = int(tlength[0] * self.sample_rate)
+ self.cur_stop = self.cur_start + self.block_length
+
+ tstart = self.cur_start / self.sample_rate
+ tend = self.cur_stop / self.sample_rate
+ tlen = self.block_length / self.sample_rate
+ self.gui.fileTimeStartLineEdit.setText(Qt.QString("%1").arg(tstart))
+ self.gui.fileTimeStopLineEdit.setText(Qt.QString("%1").arg(tend))
+ self.gui.fileTimeLengthLineEdit.setText(Qt.QString("%1").arg(tlen))
+
+ self.get_data(self.cur_start, self.cur_stop)
+ self.get_psd()
+ self.get_specgram()
+
+ self.update_time_curves()
+ self.update_psd_curves()
+ self.update_specgram_curves()
+ # If there's a non-digit character, reset box
+ else:
+ self.set_file_pos_box(self.cur_start, self.cur_stop)
+
+
+ def update_time_curves(self):
+ self.icurve.setData(self.time, self.iq.imag)
+ self.rcurve.setData(self.time, self.iq.real)
+
+ # Reset the x-axis to the new time scale
+ iqmax = 1.5 * max(max(self.iq.real), max(self.iq.imag))
+ iqmin = 1.5 * min(min(self.iq.real), min(self.iq.imag))
+ self.gui.timePlot.setAxisScale(self.gui.timePlot.xBottom,
+ min(self.time),
+ max(self.time))
+ self.gui.timePlot.setAxisScale(self.gui.timePlot.yLeft,
+ iqmin,
+ iqmax)
+
+ # Set the zoomer base to unzoom to the new axis
+ self.timeZoomer.setZoomBase()
+
+ self.gui.timePlot.replot()
+
+ def update_psd_curves(self):
+ self.psdcurve.setData(self.freq, self.iq_psd)
+
+ self.gui.freqPlot.setAxisScale(self.gui.freqPlot.xBottom,
+ min(self.freq),
+ max(self.freq))
+
+ # Set the zoomer base to unzoom to the new axis
+ self.freqZoomer.setZoomBase()
+
+ self.gui.freqPlot.replot()
+
+ def update_specgram_curves(self):
+ # We don't have to reset the data for the speccurve here
+ # since this is taken care of in the SpectrogramData class
+ self.specdata.set_data(self.spec_f, self.spec_t, self.iq_spec)
+
+ # Set the color map based on the new data
+ self.rightAxis.setColorMap(self.spec.data().range(),
+ self.spec.colorMap())
+
+ # Set the new axis base; include right axis for the intenisty color bar
+ self.gui.specPlot.setAxisScale(self.gui.specPlot.xBottom,
+ min(self.spec_f),
+ max(self.spec_f))
+ self.gui.specPlot.setAxisScale(self.gui.specPlot.yLeft,
+ min(self.spec_t),
+ max(self.spec_t))
+ self.gui.specPlot.setAxisScale(self.gui.specPlot.yRight,
+ self.iq_spec.min(),
+ self.iq_spec.max())
+
+ # Set the zoomer base to unzoom to the new axis
+ self.specZoomer.setZoomBase()
+
+ self.gui.specPlot.replot()
+
+ def tabChanged(self, index):
+ self.gui.timePlot.replot()
+ self.gui.freqPlot.replot()
+
+ def color_black_on_white(self):
+ blue = QtGui.qRgb(0x00, 0x00, 0xFF)
+ red = QtGui.qRgb(0xFF, 0x00, 0x00)
+
+ blackBrush = Qt.QBrush(Qt.QColor("black"))
+ blueBrush = Qt.QBrush(Qt.QColor(blue))
+ redBrush = Qt.QBrush(Qt.QColor(red))
+
+ self.gui.timePlot.setCanvasBackground(Qt.QColor("white"))
+ self.gui.freqPlot.setCanvasBackground(Qt.QColor("white"))
+ self.picker.setTrackerPen(Qt.QPen(blackBrush, 2))
+ self.timeZoomer.setTrackerPen(Qt.QPen(blackBrush, 2))
+ self.timeZoomer.setRubberBandPen(Qt.QPen(blackBrush, 2))
+ self.freqZoomer.setTrackerPen(Qt.QPen(blackBrush, 2))
+ self.freqZoomer.setRubberBandPen(Qt.QPen(blackBrush, 2))
+ self.psdcurve.setPen(Qt.QPen(blueBrush, 1))
+ self.rcurve.setPen(Qt.QPen(blueBrush, 2))
+ self.icurve.setPen(Qt.QPen(redBrush, 2))
+
+ self.gui.timePlot.replot()
+ self.gui.freqPlot.replot()
+
+ def color_white_on_black(self):
+ white = QtGui.qRgb(0xFF, 0xFF, 0xFF)
+ red = QtGui.qRgb(0xFF, 0x00, 0x00)
+
+ whiteBrush = Qt.QBrush(Qt.QColor("white"))
+ whiteBrush = Qt.QBrush(Qt.QColor(white))
+ redBrush = Qt.QBrush(Qt.QColor(red))
+
+ self.gui.timePlot.setCanvasBackground(QtGui.QColor("black"))
+ self.gui.freqPlot.setCanvasBackground(QtGui.QColor("black"))
+ self.picker.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.timeZoomer.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.timeZoomer.setRubberBandPen(Qt.QPen(whiteBrush, 2))
+ self.freqZoomer.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.freqZoomer.setRubberBandPen(Qt.QPen(whiteBrush, 2))
+ self.psdcurve.setPen(Qt.QPen(whiteBrush, 1))
+ self.rcurve.setPen(Qt.QPen(whiteBrush, 2))
+ self.icurve.setPen(Qt.QPen(redBrush, 2))
+
+ self.gui.timePlot.replot()
+ self.gui.freqPlot.replot()
+
+
+ def color_green_on_black(self):
+ green = QtGui.qRgb(0x00, 0xFF, 0x00)
+ red = QtGui.qRgb(0xFF, 0x00, 0x50)
+
+ whiteBrush = Qt.QBrush(Qt.QColor("white"))
+ greenBrush = Qt.QBrush(Qt.QColor(green))
+ redBrush = Qt.QBrush(Qt.QColor(red))
+
+ self.gui.timePlot.setCanvasBackground(QtGui.QColor("black"))
+ self.gui.freqPlot.setCanvasBackground(QtGui.QColor("black"))
+ self.picker.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.timeZoomer.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.timeZoomer.setRubberBandPen(Qt.QPen(whiteBrush, 2))
+ self.freqZoomer.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.freqZoomer.setRubberBandPen(Qt.QPen(whiteBrush, 2))
+ self.psdcurve.setPen(Qt.QPen(greenBrush, 1))
+ self.rcurve.setPen(Qt.QPen(greenBrush, 2))
+ self.icurve.setPen(Qt.QPen(redBrush, 2))
+
+ self.gui.timePlot.replot()
+ self.gui.freqPlot.replot()
+
+ def color_blue_on_black(self):
+ blue = QtGui.qRgb(0x00, 0x00, 0xFF)
+ red = QtGui.qRgb(0xFF, 0x00, 0x00)
+
+ whiteBrush = Qt.QBrush(Qt.QColor("white"))
+ blueBrush = Qt.QBrush(Qt.QColor(blue))
+ redBrush = Qt.QBrush(Qt.QColor(red))
+
+ self.gui.timePlot.setCanvasBackground(QtGui.QColor("black"))
+ self.gui.freqPlot.setCanvasBackground(QtGui.QColor("black"))
+ self.picker.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.timeZoomer.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.timeZoomer.setRubberBandPen(Qt.QPen(whiteBrush, 2))
+ self.freqZoomer.setTrackerPen(Qt.QPen(whiteBrush, 2))
+ self.freqZoomer.setRubberBandPen(Qt.QPen(whiteBrush, 2))
+ self.psdcurve.setPen(Qt.QPen(blueBrush, 1))
+ self.rcurve.setPen(Qt.QPen(blueBrush, 2))
+ self.icurve.setPen(Qt.QPen(redBrush, 2))
+
+ self.gui.timePlot.replot()
+ self.gui.freqPlot.replot()
+
+def setup_options():
+ usage="%prog: [options] (input_filename)"
+ description = ""
+
+ parser = OptionParser(conflict_handler="resolve", usage=usage, description=description)
+ parser.add_option("-B", "--block-length", type="int", default=8192,
+ help="Specify the block size [default=%default]")
+ parser.add_option("-s", "--start", type="int", default=0,
+ help="Specify where to start in the file [default=%default]")
+ parser.add_option("-R", "--sample-rate", type="float", default=1.0,
+ help="Set the sampler rate of the data [default=%default]")
+ parser.add_option("", "--psd-size", type="int", default=2048,
+ help="Set the size of the PSD FFT [default=%default]")
+ parser.add_option("", "--spec-size", type="int", default=2048,
+ help="Set the size of the spectrogram FFT [default=%default]")
+
+ return parser
+
+def main(args):
+ parser = setup_options()
+ (options, args) = parser.parse_args ()
+
+ if(len(args) == 1):
+ filename = args[0]
+ else:
+ filename = None
+
+ app = Qt.QApplication(args)
+ gplt = gr_plot_qt(app, filename, options)
+ app.exec_()
+
+if __name__ == '__main__':
+ main(sys.argv)
+
--- /dev/null
+# -*- coding: utf-8 -*-
+
+# Form implementation generated from reading ui file 'pyqt_filter.ui'
+#
+# Created: Tue Aug 25 11:13:57 2009
+# by: PyQt4 UI code generator 4.4.3
+#
+# WARNING! All changes made in this file will be lost!
+
+from PyQt4 import QtCore, QtGui
+
+class Ui_MainWindow(object):
+ def setupUi(self, MainWindow):
+ MainWindow.setObjectName("MainWindow")
+ MainWindow.resize(1124, 696)
+ self.centralwidget = QtGui.QWidget(MainWindow)
+ self.centralwidget.setObjectName("centralwidget")
+ self.gridLayout = QtGui.QGridLayout(self.centralwidget)
+ self.gridLayout.setObjectName("gridLayout")
+ self.filterFrame = QtGui.QFrame(self.centralwidget)
+ self.filterFrame.setMinimumSize(QtCore.QSize(300, 0))
+ self.filterFrame.setMaximumSize(QtCore.QSize(300, 16777215))
+ self.filterFrame.setFrameShape(QtGui.QFrame.StyledPanel)
+ self.filterFrame.setFrameShadow(QtGui.QFrame.Raised)
+ self.filterFrame.setObjectName("filterFrame")
+ self.verticalLayout = QtGui.QVBoxLayout(self.filterFrame)
+ self.verticalLayout.setObjectName("verticalLayout")
+ self.filterTypeComboBox = QtGui.QComboBox(self.filterFrame)
+ self.filterTypeComboBox.setObjectName("filterTypeComboBox")
+ self.filterTypeComboBox.addItem(QtCore.QString())
+ self.filterTypeComboBox.addItem(QtCore.QString())
+ self.filterTypeComboBox.addItem(QtCore.QString())
+ self.filterTypeComboBox.addItem(QtCore.QString())
+ self.filterTypeComboBox.addItem(QtCore.QString())
+ self.filterTypeComboBox.addItem(QtCore.QString())
+ self.filterTypeComboBox.addItem(QtCore.QString())
+ self.verticalLayout.addWidget(self.filterTypeComboBox)
+ self.filterDesignTypeComboBox = QtGui.QComboBox(self.filterFrame)
+ self.filterDesignTypeComboBox.setObjectName("filterDesignTypeComboBox")
+ self.filterDesignTypeComboBox.addItem(QtCore.QString())
+ self.filterDesignTypeComboBox.addItem(QtCore.QString())
+ self.filterDesignTypeComboBox.addItem(QtCore.QString())
+ self.filterDesignTypeComboBox.addItem(QtCore.QString())
+ self.filterDesignTypeComboBox.addItem(QtCore.QString())
+ self.filterDesignTypeComboBox.addItem(QtCore.QString())
+ self.filterDesignTypeComboBox.addItem(QtCore.QString())
+ self.verticalLayout.addWidget(self.filterDesignTypeComboBox)
+ self.globalParamsLayout = QtGui.QFormLayout()
+ self.globalParamsLayout.setFieldGrowthPolicy(QtGui.QFormLayout.AllNonFixedFieldsGrow)
+ self.globalParamsLayout.setObjectName("globalParamsLayout")
+ self.sampleRateLabel = QtGui.QLabel(self.filterFrame)
+ self.sampleRateLabel.setMaximumSize(QtCore.QSize(16777215, 30))
+ self.sampleRateLabel.setObjectName("sampleRateLabel")
+ self.globalParamsLayout.setWidget(0, QtGui.QFormLayout.LabelRole, self.sampleRateLabel)
+ self.sampleRateEdit = QtGui.QLineEdit(self.filterFrame)
+ self.sampleRateEdit.setMaximumSize(QtCore.QSize(16777215, 30))
+ self.sampleRateEdit.setObjectName("sampleRateEdit")
+ self.globalParamsLayout.setWidget(0, QtGui.QFormLayout.FieldRole, self.sampleRateEdit)
+ self.filterGainLabel = QtGui.QLabel(self.filterFrame)
+ self.filterGainLabel.setObjectName("filterGainLabel")
+ self.globalParamsLayout.setWidget(1, QtGui.QFormLayout.LabelRole, self.filterGainLabel)
+ self.filterGainEdit = QtGui.QLineEdit(self.filterFrame)
+ self.filterGainEdit.setObjectName("filterGainEdit")
+ self.globalParamsLayout.setWidget(1, QtGui.QFormLayout.FieldRole, self.filterGainEdit)
+ self.verticalLayout.addLayout(self.globalParamsLayout)
+ self.filterTypeWidget = QtGui.QStackedWidget(self.filterFrame)
+ self.filterTypeWidget.setObjectName("filterTypeWidget")
+ self.firlpfPage = QtGui.QWidget()
+ self.firlpfPage.setObjectName("firlpfPage")
+ self.formLayout = QtGui.QFormLayout(self.firlpfPage)
+ self.formLayout.setObjectName("formLayout")
+ self.endofLpfPassBandLabel = QtGui.QLabel(self.firlpfPage)
+ self.endofLpfPassBandLabel.setObjectName("endofLpfPassBandLabel")
+ self.formLayout.setWidget(0, QtGui.QFormLayout.LabelRole, self.endofLpfPassBandLabel)
+ self.endofLpfPassBandEdit = QtGui.QLineEdit(self.firlpfPage)
+ self.endofLpfPassBandEdit.setObjectName("endofLpfPassBandEdit")
+ self.formLayout.setWidget(0, QtGui.QFormLayout.FieldRole, self.endofLpfPassBandEdit)
+ self.startofLpfStopBandLabel = QtGui.QLabel(self.firlpfPage)
+ self.startofLpfStopBandLabel.setObjectName("startofLpfStopBandLabel")
+ self.formLayout.setWidget(1, QtGui.QFormLayout.LabelRole, self.startofLpfStopBandLabel)
+ self.startofLpfStopBandEdit = QtGui.QLineEdit(self.firlpfPage)
+ self.startofLpfStopBandEdit.setObjectName("startofLpfStopBandEdit")
+ self.formLayout.setWidget(1, QtGui.QFormLayout.FieldRole, self.startofLpfStopBandEdit)
+ self.lpfStopBandAttenLabel = QtGui.QLabel(self.firlpfPage)
+ self.lpfStopBandAttenLabel.setObjectName("lpfStopBandAttenLabel")
+ self.formLayout.setWidget(2, QtGui.QFormLayout.LabelRole, self.lpfStopBandAttenLabel)
+ self.lpfStopBandAttenEdit = QtGui.QLineEdit(self.firlpfPage)
+ self.lpfStopBandAttenEdit.setObjectName("lpfStopBandAttenEdit")
+ self.formLayout.setWidget(2, QtGui.QFormLayout.FieldRole, self.lpfStopBandAttenEdit)
+ self.lpfPassBandRippleEdit = QtGui.QLineEdit(self.firlpfPage)
+ self.lpfPassBandRippleEdit.setObjectName("lpfPassBandRippleEdit")
+ self.formLayout.setWidget(3, QtGui.QFormLayout.FieldRole, self.lpfPassBandRippleEdit)
+ self.lpfPassBandRippleLabel = QtGui.QLabel(self.firlpfPage)
+ self.lpfPassBandRippleLabel.setObjectName("lpfPassBandRippleLabel")
+ self.formLayout.setWidget(3, QtGui.QFormLayout.LabelRole, self.lpfPassBandRippleLabel)
+ self.filterTypeWidget.addWidget(self.firlpfPage)
+ self.firbpfPage = QtGui.QWidget()
+ self.firbpfPage.setObjectName("firbpfPage")
+ self.formLayout_2 = QtGui.QFormLayout(self.firbpfPage)
+ self.formLayout_2.setObjectName("formLayout_2")
+ self.startofBpfPassBandLabel = QtGui.QLabel(self.firbpfPage)
+ self.startofBpfPassBandLabel.setObjectName("startofBpfPassBandLabel")
+ self.formLayout_2.setWidget(0, QtGui.QFormLayout.LabelRole, self.startofBpfPassBandLabel)
+ self.startofBpfPassBandEdit = QtGui.QLineEdit(self.firbpfPage)
+ self.startofBpfPassBandEdit.setObjectName("startofBpfPassBandEdit")
+ self.formLayout_2.setWidget(0, QtGui.QFormLayout.FieldRole, self.startofBpfPassBandEdit)
+ self.endofBpfPassBandLabel = QtGui.QLabel(self.firbpfPage)
+ self.endofBpfPassBandLabel.setObjectName("endofBpfPassBandLabel")
+ self.formLayout_2.setWidget(1, QtGui.QFormLayout.LabelRole, self.endofBpfPassBandLabel)
+ self.endofBpfPassBandEdit = QtGui.QLineEdit(self.firbpfPage)
+ self.endofBpfPassBandEdit.setObjectName("endofBpfPassBandEdit")
+ self.formLayout_2.setWidget(1, QtGui.QFormLayout.FieldRole, self.endofBpfPassBandEdit)
+ self.bpfStopBandAttenEdit = QtGui.QLineEdit(self.firbpfPage)
+ self.bpfStopBandAttenEdit.setObjectName("bpfStopBandAttenEdit")
+ self.formLayout_2.setWidget(3, QtGui.QFormLayout.FieldRole, self.bpfStopBandAttenEdit)
+ self.bpfStopBandAttenLabel = QtGui.QLabel(self.firbpfPage)
+ self.bpfStopBandAttenLabel.setObjectName("bpfStopBandAttenLabel")
+ self.formLayout_2.setWidget(3, QtGui.QFormLayout.LabelRole, self.bpfStopBandAttenLabel)
+ self.bpfTransitionLabel = QtGui.QLabel(self.firbpfPage)
+ self.bpfTransitionLabel.setObjectName("bpfTransitionLabel")
+ self.formLayout_2.setWidget(2, QtGui.QFormLayout.LabelRole, self.bpfTransitionLabel)
+ self.bpfTransitionEdit = QtGui.QLineEdit(self.firbpfPage)
+ self.bpfTransitionEdit.setObjectName("bpfTransitionEdit")
+ self.formLayout_2.setWidget(2, QtGui.QFormLayout.FieldRole, self.bpfTransitionEdit)
+ self.bpfPassBandRippleEdit = QtGui.QLineEdit(self.firbpfPage)
+ self.bpfPassBandRippleEdit.setObjectName("bpfPassBandRippleEdit")
+ self.formLayout_2.setWidget(4, QtGui.QFormLayout.FieldRole, self.bpfPassBandRippleEdit)
+ self.bpfPassBandRippleLabel = QtGui.QLabel(self.firbpfPage)
+ self.bpfPassBandRippleLabel.setObjectName("bpfPassBandRippleLabel")
+ self.formLayout_2.setWidget(4, QtGui.QFormLayout.LabelRole, self.bpfPassBandRippleLabel)
+ self.filterTypeWidget.addWidget(self.firbpfPage)
+ self.firbnfPage = QtGui.QWidget()
+ self.firbnfPage.setObjectName("firbnfPage")
+ self.formLayout_5 = QtGui.QFormLayout(self.firbnfPage)
+ self.formLayout_5.setFieldGrowthPolicy(QtGui.QFormLayout.AllNonFixedFieldsGrow)
+ self.formLayout_5.setObjectName("formLayout_5")
+ self.startofBnfStopBandLabel = QtGui.QLabel(self.firbnfPage)
+ self.startofBnfStopBandLabel.setObjectName("startofBnfStopBandLabel")
+ self.formLayout_5.setWidget(0, QtGui.QFormLayout.LabelRole, self.startofBnfStopBandLabel)
+ self.startofBnfStopBandEdit = QtGui.QLineEdit(self.firbnfPage)
+ self.startofBnfStopBandEdit.setObjectName("startofBnfStopBandEdit")
+ self.formLayout_5.setWidget(0, QtGui.QFormLayout.FieldRole, self.startofBnfStopBandEdit)
+ self.endofBnfStopBandLabel = QtGui.QLabel(self.firbnfPage)
+ self.endofBnfStopBandLabel.setObjectName("endofBnfStopBandLabel")
+ self.formLayout_5.setWidget(1, QtGui.QFormLayout.LabelRole, self.endofBnfStopBandLabel)
+ self.endofBnfStopBandEdit = QtGui.QLineEdit(self.firbnfPage)
+ self.endofBnfStopBandEdit.setObjectName("endofBnfStopBandEdit")
+ self.formLayout_5.setWidget(1, QtGui.QFormLayout.FieldRole, self.endofBnfStopBandEdit)
+ self.bnfTransitionLabel = QtGui.QLabel(self.firbnfPage)
+ self.bnfTransitionLabel.setObjectName("bnfTransitionLabel")
+ self.formLayout_5.setWidget(2, QtGui.QFormLayout.LabelRole, self.bnfTransitionLabel)
+ self.bnfTransitionEdit = QtGui.QLineEdit(self.firbnfPage)
+ self.bnfTransitionEdit.setObjectName("bnfTransitionEdit")
+ self.formLayout_5.setWidget(2, QtGui.QFormLayout.FieldRole, self.bnfTransitionEdit)
+ self.bnfStopBandAttenLabel = QtGui.QLabel(self.firbnfPage)
+ self.bnfStopBandAttenLabel.setObjectName("bnfStopBandAttenLabel")
+ self.formLayout_5.setWidget(3, QtGui.QFormLayout.LabelRole, self.bnfStopBandAttenLabel)
+ self.bnfStopBandAttenEdit = QtGui.QLineEdit(self.firbnfPage)
+ self.bnfStopBandAttenEdit.setObjectName("bnfStopBandAttenEdit")
+ self.formLayout_5.setWidget(3, QtGui.QFormLayout.FieldRole, self.bnfStopBandAttenEdit)
+ self.bnfPassBandRippleLabel = QtGui.QLabel(self.firbnfPage)
+ self.bnfPassBandRippleLabel.setObjectName("bnfPassBandRippleLabel")
+ self.formLayout_5.setWidget(4, QtGui.QFormLayout.LabelRole, self.bnfPassBandRippleLabel)
+ self.bnfPassBandRippleEdit = QtGui.QLineEdit(self.firbnfPage)
+ self.bnfPassBandRippleEdit.setObjectName("bnfPassBandRippleEdit")
+ self.formLayout_5.setWidget(4, QtGui.QFormLayout.FieldRole, self.bnfPassBandRippleEdit)
+ self.filterTypeWidget.addWidget(self.firbnfPage)
+ self.firhpfPage = QtGui.QWidget()
+ self.firhpfPage.setObjectName("firhpfPage")
+ self.formLayout_3 = QtGui.QFormLayout(self.firhpfPage)
+ self.formLayout_3.setFieldGrowthPolicy(QtGui.QFormLayout.AllNonFixedFieldsGrow)
+ self.formLayout_3.setObjectName("formLayout_3")
+ self.endofHpfStopBandLabel = QtGui.QLabel(self.firhpfPage)
+ self.endofHpfStopBandLabel.setObjectName("endofHpfStopBandLabel")
+ self.formLayout_3.setWidget(0, QtGui.QFormLayout.LabelRole, self.endofHpfStopBandLabel)
+ self.endofHpfStopBandEdit = QtGui.QLineEdit(self.firhpfPage)
+ self.endofHpfStopBandEdit.setObjectName("endofHpfStopBandEdit")
+ self.formLayout_3.setWidget(0, QtGui.QFormLayout.FieldRole, self.endofHpfStopBandEdit)
+ self.startofHpfPassBandLabel = QtGui.QLabel(self.firhpfPage)
+ self.startofHpfPassBandLabel.setObjectName("startofHpfPassBandLabel")
+ self.formLayout_3.setWidget(1, QtGui.QFormLayout.LabelRole, self.startofHpfPassBandLabel)
+ self.startofHpfPassBandEdit = QtGui.QLineEdit(self.firhpfPage)
+ self.startofHpfPassBandEdit.setObjectName("startofHpfPassBandEdit")
+ self.formLayout_3.setWidget(1, QtGui.QFormLayout.FieldRole, self.startofHpfPassBandEdit)
+ self.hpfStopBandAttenLabel = QtGui.QLabel(self.firhpfPage)
+ self.hpfStopBandAttenLabel.setObjectName("hpfStopBandAttenLabel")
+ self.formLayout_3.setWidget(2, QtGui.QFormLayout.LabelRole, self.hpfStopBandAttenLabel)
+ self.hpfStopBandAttenEdit = QtGui.QLineEdit(self.firhpfPage)
+ self.hpfStopBandAttenEdit.setObjectName("hpfStopBandAttenEdit")
+ self.formLayout_3.setWidget(2, QtGui.QFormLayout.FieldRole, self.hpfStopBandAttenEdit)
+ self.hpfPassBandRippleLabel = QtGui.QLabel(self.firhpfPage)
+ self.hpfPassBandRippleLabel.setObjectName("hpfPassBandRippleLabel")
+ self.formLayout_3.setWidget(3, QtGui.QFormLayout.LabelRole, self.hpfPassBandRippleLabel)
+ self.hpfPassBandRippleEdit = QtGui.QLineEdit(self.firhpfPage)
+ self.hpfPassBandRippleEdit.setObjectName("hpfPassBandRippleEdit")
+ self.formLayout_3.setWidget(3, QtGui.QFormLayout.FieldRole, self.hpfPassBandRippleEdit)
+ self.filterTypeWidget.addWidget(self.firhpfPage)
+ self.rrcPage = QtGui.QWidget()
+ self.rrcPage.setObjectName("rrcPage")
+ self.formLayout_6 = QtGui.QFormLayout(self.rrcPage)
+ self.formLayout_6.setObjectName("formLayout_6")
+ self.rrcSymbolRateLabel = QtGui.QLabel(self.rrcPage)
+ self.rrcSymbolRateLabel.setObjectName("rrcSymbolRateLabel")
+ self.formLayout_6.setWidget(0, QtGui.QFormLayout.LabelRole, self.rrcSymbolRateLabel)
+ self.rrcAlphaLabel = QtGui.QLabel(self.rrcPage)
+ self.rrcAlphaLabel.setObjectName("rrcAlphaLabel")
+ self.formLayout_6.setWidget(1, QtGui.QFormLayout.LabelRole, self.rrcAlphaLabel)
+ self.rrcNumTapsLabel = QtGui.QLabel(self.rrcPage)
+ self.rrcNumTapsLabel.setObjectName("rrcNumTapsLabel")
+ self.formLayout_6.setWidget(2, QtGui.QFormLayout.LabelRole, self.rrcNumTapsLabel)
+ self.rrcSymbolRateEdit = QtGui.QLineEdit(self.rrcPage)
+ self.rrcSymbolRateEdit.setObjectName("rrcSymbolRateEdit")
+ self.formLayout_6.setWidget(0, QtGui.QFormLayout.FieldRole, self.rrcSymbolRateEdit)
+ self.rrcAlphaEdit = QtGui.QLineEdit(self.rrcPage)
+ self.rrcAlphaEdit.setObjectName("rrcAlphaEdit")
+ self.formLayout_6.setWidget(1, QtGui.QFormLayout.FieldRole, self.rrcAlphaEdit)
+ self.rrcNumTapsEdit = QtGui.QLineEdit(self.rrcPage)
+ self.rrcNumTapsEdit.setObjectName("rrcNumTapsEdit")
+ self.formLayout_6.setWidget(2, QtGui.QFormLayout.FieldRole, self.rrcNumTapsEdit)
+ self.filterTypeWidget.addWidget(self.rrcPage)
+ self.gausPage = QtGui.QWidget()
+ self.gausPage.setObjectName("gausPage")
+ self.formLayout_7 = QtGui.QFormLayout(self.gausPage)
+ self.formLayout_7.setObjectName("formLayout_7")
+ self.gausSymbolRateLabel = QtGui.QLabel(self.gausPage)
+ self.gausSymbolRateLabel.setObjectName("gausSymbolRateLabel")
+ self.formLayout_7.setWidget(0, QtGui.QFormLayout.LabelRole, self.gausSymbolRateLabel)
+ self.gausSymbolRateEdit = QtGui.QLineEdit(self.gausPage)
+ self.gausSymbolRateEdit.setObjectName("gausSymbolRateEdit")
+ self.formLayout_7.setWidget(0, QtGui.QFormLayout.FieldRole, self.gausSymbolRateEdit)
+ self.gausBTLabel = QtGui.QLabel(self.gausPage)
+ self.gausBTLabel.setObjectName("gausBTLabel")
+ self.formLayout_7.setWidget(1, QtGui.QFormLayout.LabelRole, self.gausBTLabel)
+ self.gausBTEdit = QtGui.QLineEdit(self.gausPage)
+ self.gausBTEdit.setObjectName("gausBTEdit")
+ self.formLayout_7.setWidget(1, QtGui.QFormLayout.FieldRole, self.gausBTEdit)
+ self.gausNumTapsLabel = QtGui.QLabel(self.gausPage)
+ self.gausNumTapsLabel.setObjectName("gausNumTapsLabel")
+ self.formLayout_7.setWidget(2, QtGui.QFormLayout.LabelRole, self.gausNumTapsLabel)
+ self.gausNumTapsEdit = QtGui.QLineEdit(self.gausPage)
+ self.gausNumTapsEdit.setObjectName("gausNumTapsEdit")
+ self.formLayout_7.setWidget(2, QtGui.QFormLayout.FieldRole, self.gausNumTapsEdit)
+ self.filterTypeWidget.addWidget(self.gausPage)
+ self.verticalLayout.addWidget(self.filterTypeWidget)
+ self.filterPropsBox = QtGui.QGroupBox(self.filterFrame)
+ self.filterPropsBox.setObjectName("filterPropsBox")
+ self.formLayout_8 = QtGui.QFormLayout(self.filterPropsBox)
+ self.formLayout_8.setFieldGrowthPolicy(QtGui.QFormLayout.AllNonFixedFieldsGrow)
+ self.formLayout_8.setObjectName("formLayout_8")
+ self.nTapsLabel = QtGui.QLabel(self.filterPropsBox)
+ self.nTapsLabel.setMinimumSize(QtCore.QSize(150, 0))
+ self.nTapsLabel.setObjectName("nTapsLabel")
+ self.formLayout_8.setWidget(1, QtGui.QFormLayout.LabelRole, self.nTapsLabel)
+ self.nTapsEdit = QtGui.QLabel(self.filterPropsBox)
+ self.nTapsEdit.setMaximumSize(QtCore.QSize(100, 16777215))
+ self.nTapsEdit.setFrameShape(QtGui.QFrame.Box)
+ self.nTapsEdit.setFrameShadow(QtGui.QFrame.Raised)
+ self.nTapsEdit.setObjectName("nTapsEdit")
+ self.formLayout_8.setWidget(1, QtGui.QFormLayout.FieldRole, self.nTapsEdit)
+ self.verticalLayout.addWidget(self.filterPropsBox)
+ self.sysParamsBox = QtGui.QGroupBox(self.filterFrame)
+ self.sysParamsBox.setObjectName("sysParamsBox")
+ self.formLayout_4 = QtGui.QFormLayout(self.sysParamsBox)
+ self.formLayout_4.setObjectName("formLayout_4")
+ self.nfftEdit = QtGui.QLineEdit(self.sysParamsBox)
+ self.nfftEdit.setObjectName("nfftEdit")
+ self.formLayout_4.setWidget(1, QtGui.QFormLayout.FieldRole, self.nfftEdit)
+ self.nfftLabel = QtGui.QLabel(self.sysParamsBox)
+ self.nfftLabel.setMinimumSize(QtCore.QSize(150, 0))
+ self.nfftLabel.setObjectName("nfftLabel")
+ self.formLayout_4.setWidget(1, QtGui.QFormLayout.LabelRole, self.nfftLabel)
+ self.verticalLayout.addWidget(self.sysParamsBox)
+ self.designButton = QtGui.QPushButton(self.filterFrame)
+ self.designButton.setMinimumSize(QtCore.QSize(0, 0))
+ self.designButton.setMaximumSize(QtCore.QSize(200, 16777215))
+ self.designButton.setAutoDefault(True)
+ self.designButton.setDefault(True)
+ self.designButton.setObjectName("designButton")
+ self.verticalLayout.addWidget(self.designButton)
+ self.gridLayout.addWidget(self.filterFrame, 1, 0, 1, 1)
+ self.tabGroup = QtGui.QTabWidget(self.centralwidget)
+ self.tabGroup.setMinimumSize(QtCore.QSize(800, 0))
+ self.tabGroup.setObjectName("tabGroup")
+ self.freqTab = QtGui.QWidget()
+ self.freqTab.setObjectName("freqTab")
+ self.horizontalLayout_2 = QtGui.QHBoxLayout(self.freqTab)
+ self.horizontalLayout_2.setObjectName("horizontalLayout_2")
+ self.freqPlot = Qwt5.QwtPlot(self.freqTab)
+ self.freqPlot.setObjectName("freqPlot")
+ self.horizontalLayout_2.addWidget(self.freqPlot)
+ self.tabGroup.addTab(self.freqTab, "")
+ self.timeTab = QtGui.QWidget()
+ self.timeTab.setObjectName("timeTab")
+ self.horizontalLayout = QtGui.QHBoxLayout(self.timeTab)
+ self.horizontalLayout.setObjectName("horizontalLayout")
+ self.timePlot = Qwt5.QwtPlot(self.timeTab)
+ self.timePlot.setObjectName("timePlot")
+ self.horizontalLayout.addWidget(self.timePlot)
+ self.tabGroup.addTab(self.timeTab, "")
+ self.phaseTab = QtGui.QWidget()
+ self.phaseTab.setObjectName("phaseTab")
+ self.horizontalLayout_3 = QtGui.QHBoxLayout(self.phaseTab)
+ self.horizontalLayout_3.setObjectName("horizontalLayout_3")
+ self.phasePlot = Qwt5.QwtPlot(self.phaseTab)
+ self.phasePlot.setObjectName("phasePlot")
+ self.horizontalLayout_3.addWidget(self.phasePlot)
+ self.tabGroup.addTab(self.phaseTab, "")
+ self.groupTab = QtGui.QWidget()
+ self.groupTab.setObjectName("groupTab")
+ self.horizontalLayout_4 = QtGui.QHBoxLayout(self.groupTab)
+ self.horizontalLayout_4.setObjectName("horizontalLayout_4")
+ self.groupPlot = Qwt5.QwtPlot(self.groupTab)
+ self.groupPlot.setObjectName("groupPlot")
+ self.horizontalLayout_4.addWidget(self.groupPlot)
+ self.tabGroup.addTab(self.groupTab, "")
+ self.gridLayout.addWidget(self.tabGroup, 1, 1, 1, 1)
+ MainWindow.setCentralWidget(self.centralwidget)
+ self.menubar = QtGui.QMenuBar(MainWindow)
+ self.menubar.setGeometry(QtCore.QRect(0, 0, 1124, 24))
+ self.menubar.setObjectName("menubar")
+ self.menu_File = QtGui.QMenu(self.menubar)
+ self.menu_File.setObjectName("menu_File")
+ MainWindow.setMenuBar(self.menubar)
+ self.statusbar = QtGui.QStatusBar(MainWindow)
+ self.statusbar.setObjectName("statusbar")
+ MainWindow.setStatusBar(self.statusbar)
+ self.action_open = QtGui.QAction(MainWindow)
+ self.action_open.setObjectName("action_open")
+ self.action_exit = QtGui.QAction(MainWindow)
+ self.action_exit.setObjectName("action_exit")
+ self.menu_File.addAction(self.action_exit)
+ self.menubar.addAction(self.menu_File.menuAction())
+
+ self.retranslateUi(MainWindow)
+ self.filterTypeWidget.setCurrentIndex(0)
+ self.tabGroup.setCurrentIndex(0)
+ QtCore.QObject.connect(self.action_exit, QtCore.SIGNAL("activated()"), MainWindow.close)
+ QtCore.QMetaObject.connectSlotsByName(MainWindow)
+ MainWindow.setTabOrder(self.filterTypeComboBox, self.filterDesignTypeComboBox)
+ MainWindow.setTabOrder(self.filterDesignTypeComboBox, self.sampleRateEdit)
+ MainWindow.setTabOrder(self.sampleRateEdit, self.filterGainEdit)
+ MainWindow.setTabOrder(self.filterGainEdit, self.endofLpfPassBandEdit)
+ MainWindow.setTabOrder(self.endofLpfPassBandEdit, self.startofLpfStopBandEdit)
+ MainWindow.setTabOrder(self.startofLpfStopBandEdit, self.lpfStopBandAttenEdit)
+ MainWindow.setTabOrder(self.lpfStopBandAttenEdit, self.lpfPassBandRippleEdit)
+ MainWindow.setTabOrder(self.lpfPassBandRippleEdit, self.startofBpfPassBandEdit)
+ MainWindow.setTabOrder(self.startofBpfPassBandEdit, self.endofBpfPassBandEdit)
+ MainWindow.setTabOrder(self.endofBpfPassBandEdit, self.bpfTransitionEdit)
+ MainWindow.setTabOrder(self.bpfTransitionEdit, self.bpfStopBandAttenEdit)
+ MainWindow.setTabOrder(self.bpfStopBandAttenEdit, self.bpfPassBandRippleEdit)
+ MainWindow.setTabOrder(self.bpfPassBandRippleEdit, self.startofBnfStopBandEdit)
+ MainWindow.setTabOrder(self.startofBnfStopBandEdit, self.endofBnfStopBandEdit)
+ MainWindow.setTabOrder(self.endofBnfStopBandEdit, self.bnfTransitionEdit)
+ MainWindow.setTabOrder(self.bnfTransitionEdit, self.bnfStopBandAttenEdit)
+ MainWindow.setTabOrder(self.bnfStopBandAttenEdit, self.bnfPassBandRippleEdit)
+ MainWindow.setTabOrder(self.bnfPassBandRippleEdit, self.endofHpfStopBandEdit)
+ MainWindow.setTabOrder(self.endofHpfStopBandEdit, self.startofHpfPassBandEdit)
+ MainWindow.setTabOrder(self.startofHpfPassBandEdit, self.hpfStopBandAttenEdit)
+ MainWindow.setTabOrder(self.hpfStopBandAttenEdit, self.hpfPassBandRippleEdit)
+ MainWindow.setTabOrder(self.hpfPassBandRippleEdit, self.rrcSymbolRateEdit)
+ MainWindow.setTabOrder(self.rrcSymbolRateEdit, self.rrcAlphaEdit)
+ MainWindow.setTabOrder(self.rrcAlphaEdit, self.rrcNumTapsEdit)
+ MainWindow.setTabOrder(self.rrcNumTapsEdit, self.gausSymbolRateEdit)
+ MainWindow.setTabOrder(self.gausSymbolRateEdit, self.gausBTEdit)
+ MainWindow.setTabOrder(self.gausBTEdit, self.gausNumTapsEdit)
+ MainWindow.setTabOrder(self.gausNumTapsEdit, self.nfftEdit)
+ MainWindow.setTabOrder(self.nfftEdit, self.designButton)
+ MainWindow.setTabOrder(self.designButton, self.tabGroup)
+
+ def retranslateUi(self, MainWindow):
+ MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "GNU Radio Filter Design Tool", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterTypeComboBox.setItemText(0, QtGui.QApplication.translate("MainWindow", "Low Pass", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterTypeComboBox.setItemText(1, QtGui.QApplication.translate("MainWindow", "Band Pass", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterTypeComboBox.setItemText(2, QtGui.QApplication.translate("MainWindow", "Complex Band Pass", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterTypeComboBox.setItemText(3, QtGui.QApplication.translate("MainWindow", "Band Notch", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterTypeComboBox.setItemText(4, QtGui.QApplication.translate("MainWindow", "High Pass", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterTypeComboBox.setItemText(5, QtGui.QApplication.translate("MainWindow", "Root Raised Cosine", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterTypeComboBox.setItemText(6, QtGui.QApplication.translate("MainWindow", "Gaussian", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterDesignTypeComboBox.setItemText(0, QtGui.QApplication.translate("MainWindow", "Hamming Window", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterDesignTypeComboBox.setItemText(1, QtGui.QApplication.translate("MainWindow", "Hann Window", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterDesignTypeComboBox.setItemText(2, QtGui.QApplication.translate("MainWindow", "Blackman Window", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterDesignTypeComboBox.setItemText(3, QtGui.QApplication.translate("MainWindow", "Rectangular Window", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterDesignTypeComboBox.setItemText(4, QtGui.QApplication.translate("MainWindow", "Kaiser Window", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterDesignTypeComboBox.setItemText(5, QtGui.QApplication.translate("MainWindow", "Blackman-harris Window", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterDesignTypeComboBox.setItemText(6, QtGui.QApplication.translate("MainWindow", "Equiripple", None, QtGui.QApplication.UnicodeUTF8))
+ self.sampleRateLabel.setText(QtGui.QApplication.translate("MainWindow", "Sample Rate (sps)", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterGainLabel.setText(QtGui.QApplication.translate("MainWindow", "Filter Gain", None, QtGui.QApplication.UnicodeUTF8))
+ self.endofLpfPassBandLabel.setText(QtGui.QApplication.translate("MainWindow", "End of Pass Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.startofLpfStopBandLabel.setText(QtGui.QApplication.translate("MainWindow", "Start of Stop Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.lpfStopBandAttenLabel.setText(QtGui.QApplication.translate("MainWindow", "Stop Band Attenuation (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.lpfPassBandRippleLabel.setText(QtGui.QApplication.translate("MainWindow", "Pass Band Ripple (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.startofBpfPassBandLabel.setText(QtGui.QApplication.translate("MainWindow", "Start of Pass Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.endofBpfPassBandLabel.setText(QtGui.QApplication.translate("MainWindow", "End of Pass Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.bpfStopBandAttenLabel.setText(QtGui.QApplication.translate("MainWindow", "Stop Band Attenuation (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.bpfTransitionLabel.setText(QtGui.QApplication.translate("MainWindow", "Transition Width (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.bpfPassBandRippleLabel.setText(QtGui.QApplication.translate("MainWindow", "Pass Band Ripple (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.startofBnfStopBandLabel.setText(QtGui.QApplication.translate("MainWindow", "Start of Stop Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.endofBnfStopBandLabel.setText(QtGui.QApplication.translate("MainWindow", "End of Stop Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.bnfTransitionLabel.setText(QtGui.QApplication.translate("MainWindow", "Transition Width (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.bnfStopBandAttenLabel.setText(QtGui.QApplication.translate("MainWindow", "Stop Band Attenuation (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.bnfPassBandRippleLabel.setText(QtGui.QApplication.translate("MainWindow", "Pass Band Ripple (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.endofHpfStopBandLabel.setText(QtGui.QApplication.translate("MainWindow", "End of Stop Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.startofHpfPassBandLabel.setText(QtGui.QApplication.translate("MainWindow", "Start of Pass Band (Hz)", None, QtGui.QApplication.UnicodeUTF8))
+ self.hpfStopBandAttenLabel.setText(QtGui.QApplication.translate("MainWindow", "Stop Band Attenuation (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.hpfPassBandRippleLabel.setText(QtGui.QApplication.translate("MainWindow", "Pass Band Ripple (dB)", None, QtGui.QApplication.UnicodeUTF8))
+ self.rrcSymbolRateLabel.setText(QtGui.QApplication.translate("MainWindow", "Symbol Rate (sps)", None, QtGui.QApplication.UnicodeUTF8))
+ self.rrcAlphaLabel.setText(QtGui.QApplication.translate("MainWindow", "Roll-off Factor", None, QtGui.QApplication.UnicodeUTF8))
+ self.rrcNumTapsLabel.setText(QtGui.QApplication.translate("MainWindow", "Number of Taps", None, QtGui.QApplication.UnicodeUTF8))
+ self.gausSymbolRateLabel.setText(QtGui.QApplication.translate("MainWindow", "Symbol Rate (sps)", None, QtGui.QApplication.UnicodeUTF8))
+ self.gausBTLabel.setText(QtGui.QApplication.translate("MainWindow", "Roll-off Factor", None, QtGui.QApplication.UnicodeUTF8))
+ self.gausNumTapsLabel.setText(QtGui.QApplication.translate("MainWindow", "Number of Taps", None, QtGui.QApplication.UnicodeUTF8))
+ self.filterPropsBox.setTitle(QtGui.QApplication.translate("MainWindow", "Filter Properties", None, QtGui.QApplication.UnicodeUTF8))
+ self.nTapsLabel.setText(QtGui.QApplication.translate("MainWindow", "Number of Taps:", None, QtGui.QApplication.UnicodeUTF8))
+ self.sysParamsBox.setTitle(QtGui.QApplication.translate("MainWindow", "System Parameters", None, QtGui.QApplication.UnicodeUTF8))
+ self.nfftLabel.setText(QtGui.QApplication.translate("MainWindow", "Num FFT points", None, QtGui.QApplication.UnicodeUTF8))
+ self.designButton.setText(QtGui.QApplication.translate("MainWindow", "Design", None, QtGui.QApplication.UnicodeUTF8))
+ self.tabGroup.setTabText(self.tabGroup.indexOf(self.freqTab), QtGui.QApplication.translate("MainWindow", "Frequency Domain", None, QtGui.QApplication.UnicodeUTF8))
+ self.tabGroup.setTabText(self.tabGroup.indexOf(self.timeTab), QtGui.QApplication.translate("MainWindow", "Time Domain", None, QtGui.QApplication.UnicodeUTF8))
+ self.tabGroup.setTabText(self.tabGroup.indexOf(self.phaseTab), QtGui.QApplication.translate("MainWindow", "Phase", None, QtGui.QApplication.UnicodeUTF8))
+ self.tabGroup.setTabText(self.tabGroup.indexOf(self.groupTab), QtGui.QApplication.translate("MainWindow", "Group Delay", None, QtGui.QApplication.UnicodeUTF8))
+ self.menu_File.setTitle(QtGui.QApplication.translate("MainWindow", "&File", None, QtGui.QApplication.UnicodeUTF8))
+ self.action_open.setText(QtGui.QApplication.translate("MainWindow", "&Open", None, QtGui.QApplication.UnicodeUTF8))
+ self.action_open.setShortcut(QtGui.QApplication.translate("MainWindow", "Ctrl+O", None, QtGui.QApplication.UnicodeUTF8))
+ self.action_exit.setText(QtGui.QApplication.translate("MainWindow", "E&xit", None, QtGui.QApplication.UnicodeUTF8))
+
+from PyQt4 import Qwt5
--- /dev/null
+<ui version="4.0" >
+ <class>MainWindow</class>
+ <widget class="QMainWindow" name="MainWindow" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>1124</width>
+ <height>696</height>
+ </rect>
+ </property>
+ <property name="windowTitle" >
+ <string>GNU Radio Filter Design Tool</string>
+ </property>
+ <widget class="QWidget" name="centralwidget" >
+ <layout class="QGridLayout" name="gridLayout" >
+ <item row="1" column="0" >
+ <widget class="QFrame" name="filterFrame" >
+ <property name="minimumSize" >
+ <size>
+ <width>300</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="maximumSize" >
+ <size>
+ <width>300</width>
+ <height>16777215</height>
+ </size>
+ </property>
+ <property name="frameShape" >
+ <enum>QFrame::StyledPanel</enum>
+ </property>
+ <property name="frameShadow" >
+ <enum>QFrame::Raised</enum>
+ </property>
+ <layout class="QVBoxLayout" name="verticalLayout" >
+ <item>
+ <widget class="QComboBox" name="filterTypeComboBox" >
+ <item>
+ <property name="text" >
+ <string>Low Pass</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Band Pass</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Complex Band Pass</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Band Notch</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>High Pass</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Root Raised Cosine</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Gaussian</string>
+ </property>
+ </item>
+ </widget>
+ </item>
+ <item>
+ <widget class="QComboBox" name="filterDesignTypeComboBox" >
+ <item>
+ <property name="text" >
+ <string>Hamming Window</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Hann Window</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Blackman Window</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Rectangular Window</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Kaiser Window</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Blackman-harris Window</string>
+ </property>
+ </item>
+ <item>
+ <property name="text" >
+ <string>Equiripple</string>
+ </property>
+ </item>
+ </widget>
+ </item>
+ <item>
+ <layout class="QFormLayout" name="globalParamsLayout" >
+ <property name="fieldGrowthPolicy" >
+ <enum>QFormLayout::AllNonFixedFieldsGrow</enum>
+ </property>
+ <item row="0" column="0" >
+ <widget class="QLabel" name="sampleRateLabel" >
+ <property name="maximumSize" >
+ <size>
+ <width>16777215</width>
+ <height>30</height>
+ </size>
+ </property>
+ <property name="text" >
+ <string>Sample Rate (sps)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="sampleRateEdit" >
+ <property name="maximumSize" >
+ <size>
+ <width>16777215</width>
+ <height>30</height>
+ </size>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="filterGainLabel" >
+ <property name="text" >
+ <string>Filter Gain</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="filterGainEdit" />
+ </item>
+ </layout>
+ </item>
+ <item>
+ <widget class="QStackedWidget" name="filterTypeWidget" >
+ <property name="currentIndex" >
+ <number>0</number>
+ </property>
+ <widget class="QWidget" name="firlpfPage" >
+ <layout class="QFormLayout" name="formLayout" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="endofLpfPassBandLabel" >
+ <property name="text" >
+ <string>End of Pass Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="endofLpfPassBandEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="startofLpfStopBandLabel" >
+ <property name="text" >
+ <string>Start of Stop Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="startofLpfStopBandEdit" />
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="lpfStopBandAttenLabel" >
+ <property name="text" >
+ <string>Stop Band Attenuation (dB)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="lpfStopBandAttenEdit" />
+ </item>
+ <item row="3" column="1" >
+ <widget class="QLineEdit" name="lpfPassBandRippleEdit" />
+ </item>
+ <item row="3" column="0" >
+ <widget class="QLabel" name="lpfPassBandRippleLabel" >
+ <property name="text" >
+ <string>Pass Band Ripple (dB)</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="firbpfPage" >
+ <layout class="QFormLayout" name="formLayout_2" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="startofBpfPassBandLabel" >
+ <property name="text" >
+ <string>Start of Pass Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="startofBpfPassBandEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="endofBpfPassBandLabel" >
+ <property name="text" >
+ <string>End of Pass Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="endofBpfPassBandEdit" />
+ </item>
+ <item row="3" column="1" >
+ <widget class="QLineEdit" name="bpfStopBandAttenEdit" />
+ </item>
+ <item row="3" column="0" >
+ <widget class="QLabel" name="bpfStopBandAttenLabel" >
+ <property name="text" >
+ <string>Stop Band Attenuation (dB)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="bpfTransitionLabel" >
+ <property name="text" >
+ <string>Transition Width (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="bpfTransitionEdit" />
+ </item>
+ <item row="4" column="1" >
+ <widget class="QLineEdit" name="bpfPassBandRippleEdit" />
+ </item>
+ <item row="4" column="0" >
+ <widget class="QLabel" name="bpfPassBandRippleLabel" >
+ <property name="text" >
+ <string>Pass Band Ripple (dB)</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="firbnfPage" >
+ <layout class="QFormLayout" name="formLayout_5" >
+ <property name="fieldGrowthPolicy" >
+ <enum>QFormLayout::AllNonFixedFieldsGrow</enum>
+ </property>
+ <item row="0" column="0" >
+ <widget class="QLabel" name="startofBnfStopBandLabel" >
+ <property name="text" >
+ <string>Start of Stop Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="startofBnfStopBandEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="endofBnfStopBandLabel" >
+ <property name="text" >
+ <string>End of Stop Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="endofBnfStopBandEdit" />
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="bnfTransitionLabel" >
+ <property name="text" >
+ <string>Transition Width (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="bnfTransitionEdit" />
+ </item>
+ <item row="3" column="0" >
+ <widget class="QLabel" name="bnfStopBandAttenLabel" >
+ <property name="text" >
+ <string>Stop Band Attenuation (dB)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="1" >
+ <widget class="QLineEdit" name="bnfStopBandAttenEdit" />
+ </item>
+ <item row="4" column="0" >
+ <widget class="QLabel" name="bnfPassBandRippleLabel" >
+ <property name="text" >
+ <string>Pass Band Ripple (dB)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="4" column="1" >
+ <widget class="QLineEdit" name="bnfPassBandRippleEdit" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="firhpfPage" >
+ <layout class="QFormLayout" name="formLayout_3" >
+ <property name="fieldGrowthPolicy" >
+ <enum>QFormLayout::AllNonFixedFieldsGrow</enum>
+ </property>
+ <item row="0" column="0" >
+ <widget class="QLabel" name="endofHpfStopBandLabel" >
+ <property name="text" >
+ <string>End of Stop Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="endofHpfStopBandEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="startofHpfPassBandLabel" >
+ <property name="text" >
+ <string>Start of Pass Band (Hz)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="startofHpfPassBandEdit" />
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="hpfStopBandAttenLabel" >
+ <property name="text" >
+ <string>Stop Band Attenuation (dB)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="hpfStopBandAttenEdit" />
+ </item>
+ <item row="3" column="0" >
+ <widget class="QLabel" name="hpfPassBandRippleLabel" >
+ <property name="text" >
+ <string>Pass Band Ripple (dB)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="3" column="1" >
+ <widget class="QLineEdit" name="hpfPassBandRippleEdit" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="rrcPage" >
+ <layout class="QFormLayout" name="formLayout_6" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="rrcSymbolRateLabel" >
+ <property name="text" >
+ <string>Symbol Rate (sps)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="rrcAlphaLabel" >
+ <property name="text" >
+ <string>Roll-off Factor</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="rrcNumTapsLabel" >
+ <property name="text" >
+ <string>Number of Taps</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="rrcSymbolRateEdit" />
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="rrcAlphaEdit" />
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="rrcNumTapsEdit" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="gausPage" >
+ <layout class="QFormLayout" name="formLayout_7" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="gausSymbolRateLabel" >
+ <property name="text" >
+ <string>Symbol Rate (sps)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="gausSymbolRateEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="gausBTLabel" >
+ <property name="text" >
+ <string>Roll-off Factor</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="gausBTEdit" />
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="gausNumTapsLabel" >
+ <property name="text" >
+ <string>Number of Taps</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="gausNumTapsEdit" />
+ </item>
+ </layout>
+ </widget>
+ </widget>
+ </item>
+ <item>
+ <widget class="QGroupBox" name="filterPropsBox" >
+ <property name="title" >
+ <string>Filter Properties</string>
+ </property>
+ <layout class="QFormLayout" name="formLayout_8" >
+ <property name="fieldGrowthPolicy" >
+ <enum>QFormLayout::AllNonFixedFieldsGrow</enum>
+ </property>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="nTapsLabel" >
+ <property name="minimumSize" >
+ <size>
+ <width>150</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="text" >
+ <string>Number of Taps:</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLabel" name="nTapsEdit" >
+ <property name="maximumSize" >
+ <size>
+ <width>100</width>
+ <height>16777215</height>
+ </size>
+ </property>
+ <property name="frameShape" >
+ <enum>QFrame::Box</enum>
+ </property>
+ <property name="frameShadow" >
+ <enum>QFrame::Raised</enum>
+ </property>
+ <property name="text" >
+ <string/>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item>
+ <widget class="QGroupBox" name="sysParamsBox" >
+ <property name="title" >
+ <string>System Parameters</string>
+ </property>
+ <layout class="QFormLayout" name="formLayout_4" >
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="nfftEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="nfftLabel" >
+ <property name="minimumSize" >
+ <size>
+ <width>150</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="text" >
+ <string>Num FFT points</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item>
+ <widget class="QPushButton" name="designButton" >
+ <property name="minimumSize" >
+ <size>
+ <width>0</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="maximumSize" >
+ <size>
+ <width>200</width>
+ <height>16777215</height>
+ </size>
+ </property>
+ <property name="text" >
+ <string>Design</string>
+ </property>
+ <property name="autoDefault" >
+ <bool>true</bool>
+ </property>
+ <property name="default" >
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QTabWidget" name="tabGroup" >
+ <property name="minimumSize" >
+ <size>
+ <width>800</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="currentIndex" >
+ <number>0</number>
+ </property>
+ <widget class="QWidget" name="freqTab" >
+ <attribute name="title" >
+ <string>Frequency Domain</string>
+ </attribute>
+ <layout class="QHBoxLayout" name="horizontalLayout_2" >
+ <item>
+ <widget class="QwtPlot" name="freqPlot" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="timeTab" >
+ <attribute name="title" >
+ <string>Time Domain</string>
+ </attribute>
+ <layout class="QHBoxLayout" name="horizontalLayout" >
+ <item>
+ <widget class="QwtPlot" name="timePlot" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="phaseTab" >
+ <attribute name="title" >
+ <string>Phase</string>
+ </attribute>
+ <layout class="QHBoxLayout" name="horizontalLayout_3" >
+ <item>
+ <widget class="QwtPlot" name="phasePlot" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="groupTab" >
+ <attribute name="title" >
+ <string>Group Delay</string>
+ </attribute>
+ <layout class="QHBoxLayout" name="horizontalLayout_4" >
+ <item>
+ <widget class="QwtPlot" name="groupPlot" />
+ </item>
+ </layout>
+ </widget>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <widget class="QMenuBar" name="menubar" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>1124</width>
+ <height>24</height>
+ </rect>
+ </property>
+ <widget class="QMenu" name="menu_File" >
+ <property name="title" >
+ <string>&File</string>
+ </property>
+ <addaction name="action_exit" />
+ </widget>
+ <addaction name="menu_File" />
+ </widget>
+ <widget class="QStatusBar" name="statusbar" />
+ <action name="action_open" >
+ <property name="text" >
+ <string>&Open</string>
+ </property>
+ <property name="shortcut" >
+ <string>Ctrl+O</string>
+ </property>
+ </action>
+ <action name="action_exit" >
+ <property name="text" >
+ <string>E&xit</string>
+ </property>
+ </action>
+ </widget>
+ <customwidgets>
+ <customwidget>
+ <class>QwtPlot</class>
+ <extends>QFrame</extends>
+ <header>qwt_plot.h</header>
+ </customwidget>
+ </customwidgets>
+ <tabstops>
+ <tabstop>filterTypeComboBox</tabstop>
+ <tabstop>filterDesignTypeComboBox</tabstop>
+ <tabstop>sampleRateEdit</tabstop>
+ <tabstop>filterGainEdit</tabstop>
+ <tabstop>endofLpfPassBandEdit</tabstop>
+ <tabstop>startofLpfStopBandEdit</tabstop>
+ <tabstop>lpfStopBandAttenEdit</tabstop>
+ <tabstop>lpfPassBandRippleEdit</tabstop>
+ <tabstop>startofBpfPassBandEdit</tabstop>
+ <tabstop>endofBpfPassBandEdit</tabstop>
+ <tabstop>bpfTransitionEdit</tabstop>
+ <tabstop>bpfStopBandAttenEdit</tabstop>
+ <tabstop>bpfPassBandRippleEdit</tabstop>
+ <tabstop>startofBnfStopBandEdit</tabstop>
+ <tabstop>endofBnfStopBandEdit</tabstop>
+ <tabstop>bnfTransitionEdit</tabstop>
+ <tabstop>bnfStopBandAttenEdit</tabstop>
+ <tabstop>bnfPassBandRippleEdit</tabstop>
+ <tabstop>endofHpfStopBandEdit</tabstop>
+ <tabstop>startofHpfPassBandEdit</tabstop>
+ <tabstop>hpfStopBandAttenEdit</tabstop>
+ <tabstop>hpfPassBandRippleEdit</tabstop>
+ <tabstop>rrcSymbolRateEdit</tabstop>
+ <tabstop>rrcAlphaEdit</tabstop>
+ <tabstop>rrcNumTapsEdit</tabstop>
+ <tabstop>gausSymbolRateEdit</tabstop>
+ <tabstop>gausBTEdit</tabstop>
+ <tabstop>gausNumTapsEdit</tabstop>
+ <tabstop>nfftEdit</tabstop>
+ <tabstop>designButton</tabstop>
+ <tabstop>tabGroup</tabstop>
+ </tabstops>
+ <resources/>
+ <connections>
+ <connection>
+ <sender>action_exit</sender>
+ <signal>activated()</signal>
+ <receiver>MainWindow</receiver>
+ <slot>close()</slot>
+ <hints>
+ <hint type="sourcelabel" >
+ <x>-1</x>
+ <y>-1</y>
+ </hint>
+ <hint type="destinationlabel" >
+ <x>399</x>
+ <y>347</y>
+ </hint>
+ </hints>
+ </connection>
+ </connections>
+</ui>
--- /dev/null
+# -*- coding: utf-8 -*-
+
+# Form implementation generated from reading ui file 'pyqt_plot.ui'
+#
+# Created: Tue Aug 25 18:18:14 2009
+# by: PyQt4 UI code generator 4.4.3
+#
+# WARNING! All changes made in this file will be lost!
+
+from PyQt4 import QtCore, QtGui
+
+class Ui_MainWindow(object):
+ def setupUi(self, MainWindow):
+ MainWindow.setObjectName("MainWindow")
+ MainWindow.resize(927, 696)
+ self.centralwidget = QtGui.QWidget(MainWindow)
+ self.centralwidget.setObjectName("centralwidget")
+ self.gridLayout = QtGui.QGridLayout(self.centralwidget)
+ self.gridLayout.setObjectName("gridLayout")
+ self.plotHBar = QtGui.QScrollBar(self.centralwidget)
+ self.plotHBar.setOrientation(QtCore.Qt.Horizontal)
+ self.plotHBar.setObjectName("plotHBar")
+ self.gridLayout.addWidget(self.plotHBar, 2, 0, 1, 2)
+ self.tabGroup = QtGui.QTabWidget(self.centralwidget)
+ self.tabGroup.setObjectName("tabGroup")
+ self.timeTab = QtGui.QWidget()
+ self.timeTab.setObjectName("timeTab")
+ self.horizontalLayout = QtGui.QHBoxLayout(self.timeTab)
+ self.horizontalLayout.setObjectName("horizontalLayout")
+ self.timePlot = Qwt5.QwtPlot(self.timeTab)
+ self.timePlot.setObjectName("timePlot")
+ self.horizontalLayout.addWidget(self.timePlot)
+ self.tabGroup.addTab(self.timeTab, "")
+ self.freqTab = QtGui.QWidget()
+ self.freqTab.setObjectName("freqTab")
+ self.horizontalLayout_2 = QtGui.QHBoxLayout(self.freqTab)
+ self.horizontalLayout_2.setObjectName("horizontalLayout_2")
+ self.fftPropBox = QtGui.QGroupBox(self.freqTab)
+ self.fftPropBox.setMinimumSize(QtCore.QSize(160, 0))
+ self.fftPropBox.setObjectName("fftPropBox")
+ self.formLayout_4 = QtGui.QFormLayout(self.fftPropBox)
+ self.formLayout_4.setFieldGrowthPolicy(QtGui.QFormLayout.AllNonFixedFieldsGrow)
+ self.formLayout_4.setObjectName("formLayout_4")
+ self.psdFFTComboBox = QtGui.QComboBox(self.fftPropBox)
+ self.psdFFTComboBox.setMinimumSize(QtCore.QSize(96, 0))
+ self.psdFFTComboBox.setMaximumSize(QtCore.QSize(96, 16777215))
+ self.psdFFTComboBox.setObjectName("psdFFTComboBox")
+ self.formLayout_4.setWidget(0, QtGui.QFormLayout.FieldRole, self.psdFFTComboBox)
+ self.psdFFTSizeLabel = QtGui.QLabel(self.fftPropBox)
+ self.psdFFTSizeLabel.setObjectName("psdFFTSizeLabel")
+ self.formLayout_4.setWidget(0, QtGui.QFormLayout.LabelRole, self.psdFFTSizeLabel)
+ self.horizontalLayout_2.addWidget(self.fftPropBox)
+ self.freqPlot = Qwt5.QwtPlot(self.freqTab)
+ self.freqPlot.setObjectName("freqPlot")
+ self.horizontalLayout_2.addWidget(self.freqPlot)
+ self.tabGroup.addTab(self.freqTab, "")
+ self.specTab = QtGui.QWidget()
+ self.specTab.setObjectName("specTab")
+ self.horizontalLayout_3 = QtGui.QHBoxLayout(self.specTab)
+ self.horizontalLayout_3.setObjectName("horizontalLayout_3")
+ self.groupBox = QtGui.QGroupBox(self.specTab)
+ self.groupBox.setObjectName("groupBox")
+ self.formLayout_3 = QtGui.QFormLayout(self.groupBox)
+ self.formLayout_3.setObjectName("formLayout_3")
+ self.specFFTLabel = QtGui.QLabel(self.groupBox)
+ self.specFFTLabel.setObjectName("specFFTLabel")
+ self.formLayout_3.setWidget(1, QtGui.QFormLayout.LabelRole, self.specFFTLabel)
+ self.specFFTComboBox = QtGui.QComboBox(self.groupBox)
+ self.specFFTComboBox.setMinimumSize(QtCore.QSize(96, 0))
+ self.specFFTComboBox.setMaximumSize(QtCore.QSize(96, 16777215))
+ self.specFFTComboBox.setObjectName("specFFTComboBox")
+ self.formLayout_3.setWidget(1, QtGui.QFormLayout.FieldRole, self.specFFTComboBox)
+ self.horizontalLayout_3.addWidget(self.groupBox)
+ self.specPlot = Qwt5.QwtPlot(self.specTab)
+ self.specPlot.setObjectName("specPlot")
+ self.horizontalLayout_3.addWidget(self.specPlot)
+ self.tabGroup.addTab(self.specTab, "")
+ self.gridLayout.addWidget(self.tabGroup, 1, 0, 1, 1)
+ self.filePosBox = QtGui.QGroupBox(self.centralwidget)
+ self.filePosBox.setMinimumSize(QtCore.QSize(0, 120))
+ self.filePosBox.setObjectName("filePosBox")
+ self.formLayoutWidget_2 = QtGui.QWidget(self.filePosBox)
+ self.formLayoutWidget_2.setGeometry(QtCore.QRect(0, 20, 160, 92))
+ self.formLayoutWidget_2.setObjectName("formLayoutWidget_2")
+ self.filePosLayout = QtGui.QFormLayout(self.formLayoutWidget_2)
+ self.filePosLayout.setObjectName("filePosLayout")
+ self.filePosStartLabel = QtGui.QLabel(self.formLayoutWidget_2)
+ self.filePosStartLabel.setObjectName("filePosStartLabel")
+ self.filePosLayout.setWidget(0, QtGui.QFormLayout.LabelRole, self.filePosStartLabel)
+ self.filePosStartLineEdit = QtGui.QLineEdit(self.formLayoutWidget_2)
+ self.filePosStartLineEdit.setObjectName("filePosStartLineEdit")
+ self.filePosLayout.setWidget(0, QtGui.QFormLayout.FieldRole, self.filePosStartLineEdit)
+ self.filePosStopLabel = QtGui.QLabel(self.formLayoutWidget_2)
+ self.filePosStopLabel.setObjectName("filePosStopLabel")
+ self.filePosLayout.setWidget(1, QtGui.QFormLayout.LabelRole, self.filePosStopLabel)
+ self.filePosStopLineEdit = QtGui.QLineEdit(self.formLayoutWidget_2)
+ self.filePosStopLineEdit.setObjectName("filePosStopLineEdit")
+ self.filePosLayout.setWidget(1, QtGui.QFormLayout.FieldRole, self.filePosStopLineEdit)
+ self.filePosLengthLabel = QtGui.QLabel(self.formLayoutWidget_2)
+ self.filePosLengthLabel.setObjectName("filePosLengthLabel")
+ self.filePosLayout.setWidget(2, QtGui.QFormLayout.LabelRole, self.filePosLengthLabel)
+ self.filePosLengthLineEdit = QtGui.QLineEdit(self.formLayoutWidget_2)
+ self.filePosLengthLineEdit.setObjectName("filePosLengthLineEdit")
+ self.filePosLayout.setWidget(2, QtGui.QFormLayout.FieldRole, self.filePosLengthLineEdit)
+ self.formLayoutWidget_4 = QtGui.QWidget(self.filePosBox)
+ self.formLayoutWidget_4.setGeometry(QtCore.QRect(180, 20, 231, 92))
+ self.formLayoutWidget_4.setObjectName("formLayoutWidget_4")
+ self.fileTimeLayout = QtGui.QFormLayout(self.formLayoutWidget_4)
+ self.fileTimeLayout.setObjectName("fileTimeLayout")
+ self.fileTimeStartLabel = QtGui.QLabel(self.formLayoutWidget_4)
+ self.fileTimeStartLabel.setObjectName("fileTimeStartLabel")
+ self.fileTimeLayout.setWidget(0, QtGui.QFormLayout.LabelRole, self.fileTimeStartLabel)
+ self.fileTimeStartLineEdit = QtGui.QLineEdit(self.formLayoutWidget_4)
+ self.fileTimeStartLineEdit.setObjectName("fileTimeStartLineEdit")
+ self.fileTimeLayout.setWidget(0, QtGui.QFormLayout.FieldRole, self.fileTimeStartLineEdit)
+ self.fileTimeStopLabel = QtGui.QLabel(self.formLayoutWidget_4)
+ self.fileTimeStopLabel.setObjectName("fileTimeStopLabel")
+ self.fileTimeLayout.setWidget(1, QtGui.QFormLayout.LabelRole, self.fileTimeStopLabel)
+ self.fileTimeStopLineEdit = QtGui.QLineEdit(self.formLayoutWidget_4)
+ self.fileTimeStopLineEdit.setObjectName("fileTimeStopLineEdit")
+ self.fileTimeLayout.setWidget(1, QtGui.QFormLayout.FieldRole, self.fileTimeStopLineEdit)
+ self.fileTimeLengthLabel = QtGui.QLabel(self.formLayoutWidget_4)
+ self.fileTimeLengthLabel.setObjectName("fileTimeLengthLabel")
+ self.fileTimeLayout.setWidget(2, QtGui.QFormLayout.LabelRole, self.fileTimeLengthLabel)
+ self.fileTimeLengthLineEdit = QtGui.QLineEdit(self.formLayoutWidget_4)
+ self.fileTimeLengthLineEdit.setObjectName("fileTimeLengthLineEdit")
+ self.fileTimeLayout.setWidget(2, QtGui.QFormLayout.FieldRole, self.fileTimeLengthLineEdit)
+ self.sysGroupBox = QtGui.QGroupBox(self.filePosBox)
+ self.sysGroupBox.setGeometry(QtCore.QRect(530, 0, 200, 120))
+ self.sysGroupBox.setMinimumSize(QtCore.QSize(200, 0))
+ self.sysGroupBox.setObjectName("sysGroupBox")
+ self.formLayoutWidget_3 = QtGui.QWidget(self.sysGroupBox)
+ self.formLayoutWidget_3.setGeometry(QtCore.QRect(0, 20, 191, 91))
+ self.formLayoutWidget_3.setObjectName("formLayoutWidget_3")
+ self.formLayout_2 = QtGui.QFormLayout(self.formLayoutWidget_3)
+ self.formLayout_2.setObjectName("formLayout_2")
+ self.sampleRateLabel = QtGui.QLabel(self.formLayoutWidget_3)
+ self.sampleRateLabel.setObjectName("sampleRateLabel")
+ self.formLayout_2.setWidget(0, QtGui.QFormLayout.LabelRole, self.sampleRateLabel)
+ self.sampleRateLineEdit = QtGui.QLineEdit(self.formLayoutWidget_3)
+ self.sampleRateLineEdit.setMinimumSize(QtCore.QSize(0, 0))
+ self.sampleRateLineEdit.setObjectName("sampleRateLineEdit")
+ self.formLayout_2.setWidget(0, QtGui.QFormLayout.FieldRole, self.sampleRateLineEdit)
+ self.displayGroupBox = QtGui.QGroupBox(self.filePosBox)
+ self.displayGroupBox.setGeometry(QtCore.QRect(730, 0, 170, 120))
+ self.displayGroupBox.setMinimumSize(QtCore.QSize(170, 0))
+ self.displayGroupBox.setObjectName("displayGroupBox")
+ self.verticalLayoutWidget = QtGui.QWidget(self.displayGroupBox)
+ self.verticalLayoutWidget.setGeometry(QtCore.QRect(0, 20, 160, 91))
+ self.verticalLayoutWidget.setObjectName("verticalLayoutWidget")
+ self.verticalLayout = QtGui.QVBoxLayout(self.verticalLayoutWidget)
+ self.verticalLayout.setObjectName("verticalLayout")
+ self.colorComboBox = QtGui.QComboBox(self.verticalLayoutWidget)
+ self.colorComboBox.setObjectName("colorComboBox")
+ self.verticalLayout.addWidget(self.colorComboBox)
+ spacerItem = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum, QtGui.QSizePolicy.Expanding)
+ self.verticalLayout.addItem(spacerItem)
+ self.gridLayout.addWidget(self.filePosBox, 3, 0, 1, 1)
+ MainWindow.setCentralWidget(self.centralwidget)
+ self.menubar = QtGui.QMenuBar(MainWindow)
+ self.menubar.setGeometry(QtCore.QRect(0, 0, 927, 24))
+ self.menubar.setObjectName("menubar")
+ self.menu_File = QtGui.QMenu(self.menubar)
+ self.menu_File.setObjectName("menu_File")
+ MainWindow.setMenuBar(self.menubar)
+ self.statusbar = QtGui.QStatusBar(MainWindow)
+ self.statusbar.setObjectName("statusbar")
+ MainWindow.setStatusBar(self.statusbar)
+ self.action_open = QtGui.QAction(MainWindow)
+ self.action_open.setObjectName("action_open")
+ self.action_exit = QtGui.QAction(MainWindow)
+ self.action_exit.setObjectName("action_exit")
+ self.menu_File.addAction(self.action_open)
+ self.menu_File.addAction(self.action_exit)
+ self.menubar.addAction(self.menu_File.menuAction())
+
+ self.retranslateUi(MainWindow)
+ self.tabGroup.setCurrentIndex(0)
+ QtCore.QObject.connect(self.action_exit, QtCore.SIGNAL("activated()"), MainWindow.close)
+ QtCore.QMetaObject.connectSlotsByName(MainWindow)
+
+ def retranslateUi(self, MainWindow):
+ MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "MainWindow", None, QtGui.QApplication.UnicodeUTF8))
+ self.tabGroup.setTabText(self.tabGroup.indexOf(self.timeTab), QtGui.QApplication.translate("MainWindow", "Time Domain", None, QtGui.QApplication.UnicodeUTF8))
+ self.fftPropBox.setTitle(QtGui.QApplication.translate("MainWindow", "FFT Properties", None, QtGui.QApplication.UnicodeUTF8))
+ self.psdFFTSizeLabel.setText(QtGui.QApplication.translate("MainWindow", "FFT Size", None, QtGui.QApplication.UnicodeUTF8))
+ self.tabGroup.setTabText(self.tabGroup.indexOf(self.freqTab), QtGui.QApplication.translate("MainWindow", "Frequency Domain", None, QtGui.QApplication.UnicodeUTF8))
+ self.groupBox.setTitle(QtGui.QApplication.translate("MainWindow", "Spectrogram Properties", None, QtGui.QApplication.UnicodeUTF8))
+ self.specFFTLabel.setText(QtGui.QApplication.translate("MainWindow", "FFT Size", None, QtGui.QApplication.UnicodeUTF8))
+ self.tabGroup.setTabText(self.tabGroup.indexOf(self.specTab), QtGui.QApplication.translate("MainWindow", "Spectrogram", None, QtGui.QApplication.UnicodeUTF8))
+ self.filePosBox.setTitle(QtGui.QApplication.translate("MainWindow", "File Position", None, QtGui.QApplication.UnicodeUTF8))
+ self.filePosStartLabel.setText(QtGui.QApplication.translate("MainWindow", "Start", None, QtGui.QApplication.UnicodeUTF8))
+ self.filePosStopLabel.setText(QtGui.QApplication.translate("MainWindow", "Stop", None, QtGui.QApplication.UnicodeUTF8))
+ self.filePosLengthLabel.setText(QtGui.QApplication.translate("MainWindow", "Length", None, QtGui.QApplication.UnicodeUTF8))
+ self.fileTimeStartLabel.setText(QtGui.QApplication.translate("MainWindow", "time start (sec)", None, QtGui.QApplication.UnicodeUTF8))
+ self.fileTimeStopLabel.setText(QtGui.QApplication.translate("MainWindow", "time stop (sec)", None, QtGui.QApplication.UnicodeUTF8))
+ self.fileTimeLengthLabel.setText(QtGui.QApplication.translate("MainWindow", "time length (sec)", None, QtGui.QApplication.UnicodeUTF8))
+ self.sysGroupBox.setTitle(QtGui.QApplication.translate("MainWindow", "System Properties", None, QtGui.QApplication.UnicodeUTF8))
+ self.sampleRateLabel.setText(QtGui.QApplication.translate("MainWindow", "Sample Rate", None, QtGui.QApplication.UnicodeUTF8))
+ self.displayGroupBox.setTitle(QtGui.QApplication.translate("MainWindow", "Display Properties", None, QtGui.QApplication.UnicodeUTF8))
+ self.menu_File.setTitle(QtGui.QApplication.translate("MainWindow", "&File", None, QtGui.QApplication.UnicodeUTF8))
+ self.action_open.setText(QtGui.QApplication.translate("MainWindow", "&Open", None, QtGui.QApplication.UnicodeUTF8))
+ self.action_open.setShortcut(QtGui.QApplication.translate("MainWindow", "Ctrl+O", None, QtGui.QApplication.UnicodeUTF8))
+ self.action_exit.setText(QtGui.QApplication.translate("MainWindow", "E&xit", None, QtGui.QApplication.UnicodeUTF8))
+
+from PyQt4 import Qwt5
--- /dev/null
+<ui version="4.0" >
+ <class>MainWindow</class>
+ <widget class="QMainWindow" name="MainWindow" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>927</width>
+ <height>696</height>
+ </rect>
+ </property>
+ <property name="windowTitle" >
+ <string>MainWindow</string>
+ </property>
+ <widget class="QWidget" name="centralwidget" >
+ <layout class="QGridLayout" name="gridLayout" >
+ <item row="2" column="0" colspan="2" >
+ <widget class="QScrollBar" name="plotHBar" >
+ <property name="orientation" >
+ <enum>Qt::Horizontal</enum>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0" >
+ <widget class="QTabWidget" name="tabGroup" >
+ <property name="currentIndex" >
+ <number>0</number>
+ </property>
+ <widget class="QWidget" name="timeTab" >
+ <attribute name="title" >
+ <string>Time Domain</string>
+ </attribute>
+ <layout class="QHBoxLayout" name="horizontalLayout" >
+ <item>
+ <widget class="QwtPlot" name="timePlot" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="freqTab" >
+ <attribute name="title" >
+ <string>Frequency Domain</string>
+ </attribute>
+ <layout class="QHBoxLayout" name="horizontalLayout_2" >
+ <item>
+ <widget class="QGroupBox" name="fftPropBox" >
+ <property name="minimumSize" >
+ <size>
+ <width>160</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="title" >
+ <string>FFT Properties</string>
+ </property>
+ <layout class="QFormLayout" name="formLayout_4" >
+ <property name="fieldGrowthPolicy" >
+ <enum>QFormLayout::AllNonFixedFieldsGrow</enum>
+ </property>
+ <item row="0" column="1" >
+ <widget class="QComboBox" name="psdFFTComboBox" >
+ <property name="minimumSize" >
+ <size>
+ <width>96</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="maximumSize" >
+ <size>
+ <width>96</width>
+ <height>16777215</height>
+ </size>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="0" >
+ <widget class="QLabel" name="psdFFTSizeLabel" >
+ <property name="text" >
+ <string>FFT Size</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item>
+ <widget class="QwtPlot" name="freqPlot" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="specTab" >
+ <attribute name="title" >
+ <string>Spectrogram</string>
+ </attribute>
+ <layout class="QHBoxLayout" name="horizontalLayout_3" >
+ <item>
+ <widget class="QGroupBox" name="groupBox" >
+ <property name="title" >
+ <string>Spectrogram Properties</string>
+ </property>
+ <layout class="QFormLayout" name="formLayout_3" >
+ <item row="1" column="0" >
+ <widget class="QLabel" name="specFFTLabel" >
+ <property name="text" >
+ <string>FFT Size</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QComboBox" name="specFFTComboBox" >
+ <property name="minimumSize" >
+ <size>
+ <width>96</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="maximumSize" >
+ <size>
+ <width>96</width>
+ <height>16777215</height>
+ </size>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ <item>
+ <widget class="QwtPlot" name="specPlot" />
+ </item>
+ </layout>
+ <zorder>specPlot</zorder>
+ <zorder>groupBox</zorder>
+ </widget>
+ </widget>
+ </item>
+ <item row="3" column="0" >
+ <widget class="QGroupBox" name="filePosBox" >
+ <property name="minimumSize" >
+ <size>
+ <width>0</width>
+ <height>120</height>
+ </size>
+ </property>
+ <property name="title" >
+ <string>File Position</string>
+ </property>
+ <widget class="QWidget" name="formLayoutWidget_2" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>20</y>
+ <width>160</width>
+ <height>92</height>
+ </rect>
+ </property>
+ <layout class="QFormLayout" name="filePosLayout" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="filePosStartLabel" >
+ <property name="text" >
+ <string>Start</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="filePosStartLineEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="filePosStopLabel" >
+ <property name="text" >
+ <string>Stop</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="filePosStopLineEdit" />
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="filePosLengthLabel" >
+ <property name="text" >
+ <string>Length</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="filePosLengthLineEdit" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QWidget" name="formLayoutWidget_4" >
+ <property name="geometry" >
+ <rect>
+ <x>180</x>
+ <y>20</y>
+ <width>231</width>
+ <height>92</height>
+ </rect>
+ </property>
+ <layout class="QFormLayout" name="fileTimeLayout" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="fileTimeStartLabel" >
+ <property name="text" >
+ <string>time start (sec)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="fileTimeStartLineEdit" />
+ </item>
+ <item row="1" column="0" >
+ <widget class="QLabel" name="fileTimeStopLabel" >
+ <property name="text" >
+ <string>time stop (sec)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1" >
+ <widget class="QLineEdit" name="fileTimeStopLineEdit" />
+ </item>
+ <item row="2" column="0" >
+ <widget class="QLabel" name="fileTimeLengthLabel" >
+ <property name="text" >
+ <string>time length (sec)</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1" >
+ <widget class="QLineEdit" name="fileTimeLengthLineEdit" />
+ </item>
+ </layout>
+ </widget>
+ <widget class="QGroupBox" name="sysGroupBox" >
+ <property name="geometry" >
+ <rect>
+ <x>530</x>
+ <y>0</y>
+ <width>200</width>
+ <height>120</height>
+ </rect>
+ </property>
+ <property name="minimumSize" >
+ <size>
+ <width>200</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="title" >
+ <string>System Properties</string>
+ </property>
+ <widget class="QWidget" name="formLayoutWidget_3" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>20</y>
+ <width>191</width>
+ <height>91</height>
+ </rect>
+ </property>
+ <layout class="QFormLayout" name="formLayout_2" >
+ <item row="0" column="0" >
+ <widget class="QLabel" name="sampleRateLabel" >
+ <property name="text" >
+ <string>Sample Rate</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1" >
+ <widget class="QLineEdit" name="sampleRateLineEdit" >
+ <property name="minimumSize" >
+ <size>
+ <width>0</width>
+ <height>0</height>
+ </size>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </widget>
+ <widget class="QGroupBox" name="displayGroupBox" >
+ <property name="geometry" >
+ <rect>
+ <x>730</x>
+ <y>0</y>
+ <width>170</width>
+ <height>120</height>
+ </rect>
+ </property>
+ <property name="minimumSize" >
+ <size>
+ <width>170</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="title" >
+ <string>Display Properties</string>
+ </property>
+ <widget class="QWidget" name="verticalLayoutWidget" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>20</y>
+ <width>160</width>
+ <height>91</height>
+ </rect>
+ </property>
+ <layout class="QVBoxLayout" name="verticalLayout" >
+ <item>
+ <widget class="QComboBox" name="colorComboBox" />
+ </item>
+ <item>
+ <spacer name="verticalSpacer" >
+ <property name="orientation" >
+ <enum>Qt::Vertical</enum>
+ </property>
+ <property name="sizeHint" stdset="0" >
+ <size>
+ <width>20</width>
+ <height>40</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ </layout>
+ </widget>
+ </widget>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ <widget class="QMenuBar" name="menubar" >
+ <property name="geometry" >
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>927</width>
+ <height>24</height>
+ </rect>
+ </property>
+ <widget class="QMenu" name="menu_File" >
+ <property name="title" >
+ <string>&File</string>
+ </property>
+ <addaction name="action_open" />
+ <addaction name="action_exit" />
+ </widget>
+ <addaction name="menu_File" />
+ </widget>
+ <widget class="QStatusBar" name="statusbar" />
+ <action name="action_open" >
+ <property name="text" >
+ <string>&Open</string>
+ </property>
+ <property name="shortcut" >
+ <string>Ctrl+O</string>
+ </property>
+ </action>
+ <action name="action_exit" >
+ <property name="text" >
+ <string>E&xit</string>
+ </property>
+ </action>
+ </widget>
+ <customwidgets>
+ <customwidget>
+ <class>QwtPlot</class>
+ <extends>QFrame</extends>
+ <header>qwt_plot.h</header>
+ </customwidget>
+ </customwidgets>
+ <resources/>
+ <connections>
+ <connection>
+ <sender>action_exit</sender>
+ <signal>activated()</signal>
+ <receiver>MainWindow</receiver>
+ <slot>close()</slot>
+ <hints>
+ <hint type="sourcelabel" >
+ <x>-1</x>
+ <y>-1</y>
+ </hint>
+ <hint type="destinationlabel" >
+ <x>399</x>
+ <y>347</y>
+ </hint>
+ </hints>
+ </connection>
+ </connections>
+</ui>
projects / debian / gnuradio / commitdiff