- add missing svn props from r1299 commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1302 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/board/x300t.cfg b/src/target/board/x300t.cfg
index 200bb58b1ffd4cff6e7c5ab5ade99fac960920ba..edc9be6c023282712089353ed481e0eb54be17e7 100644 (file)
--- a/src/target/board/x300t.cfg
+++ b/src/target/board/x300t.cfg
@@ -1,17 +1,17 @@
-# This is for the T-Home X300T / X301T IPTV box,\r
-# which are based on IPTV reference designs from Kiss/Cisco KMM-32**\r
-#\r
-# It has Sigma Designs SMP8634 chip.\r
-source [find target/smp8634.cfg]\r
-\r
-$_TARGETNAME configure -event reset-init { x300t_init }\r
-\r
-# 1MB CFI capable flash\r
-# flash bank <driver> <base> <size> <chip_width> <bus_width>\r
-flash bank cfi 0xac000000 0x100000 2 2 0\r
-\r
-proc x300t_init { } {\r
-       # Setup SDRAM config and flash mapping\r
-       # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4\r
-       mww 0x6f010 0x48000000\r
-}\r
+# This is for the T-Home X300T / X301T IPTV box,
+# which are based on IPTV reference designs from Kiss/Cisco KMM-32**
+#
+# It has Sigma Designs SMP8634 chip.
+source [find target/smp8634.cfg]
+
+$_TARGETNAME configure -event reset-init { x300t_init }
+
+# 1MB CFI capable flash
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank cfi 0xac000000 0x100000 2 2 0
+
+proc x300t_init { } {
+       # Setup SDRAM config and flash mapping
+       # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
+       mww 0x6f010 0x48000000
+}

diff --git a/src/target/interface/parport_dlc5.cfg b/src/target/interface/parport_dlc5.cfg
index 346aedec5a2f4ee26b6a9fe5253d0cef9f769c41..c9af262928e5c8a8e04255294ff251baae95c180 100644 (file)
--- a/src/target/interface/parport_dlc5.cfg
+++ b/src/target/interface/parport_dlc5.cfg
@@ -1,7 +1,7 @@
-telnet_port 4444\r
-gdb_port 2001\r
-\r
-interface parport\r
-parport_port /dev/parport0\r
-parport_cable dlc5\r
-jtag_speed 0\r
+telnet_port 4444
+gdb_port 2001
+
+interface parport
+parport_port /dev/parport0
+parport_cable dlc5
+jtag_speed 0

diff --git a/src/target/target/smp8634.cfg b/src/target/target/smp8634.cfg
index 2470a5dabd63fcdd45268f64be9f97919a3b452e..c1d61882207848b357c2587fa6251a9892ae746e 100644 (file)
--- a/src/target/target/smp8634.cfg
+++ b/src/target/target/smp8634.cfg
@@ -1,32 +1,32 @@
-# script for Sigma Designs SMP8634 (eventually even SMP8635)\r
-\r
-if { [info exists CHIPNAME] } {\r
-   set  _CHIPNAME $CHIPNAME\r
-} else {\r
-   set  _CHIPNAME smp8634\r
-}\r
-\r
-if { [info exists ENDIAN] } {\r
-   set  _ENDIAN $ENDIAN\r
-} else {\r
-   set  _ENDIAN little\r
-}\r
-\r
-if { [info exists CPUTAPID ] } {\r
-   set _CPUTAPID $CPUTAPID\r
-} else {\r
-   # force an error till we get a good number\r
-   set _CPUTAPID 0x08630001\r
-}\r
-\r
-jtag_nsrst_delay 100\r
-jtag_ntrst_delay 100\r
-\r
-reset_config trst_and_srst separate\r
-\r
-# jtag scan chain\r
-# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag newtap $_CHIPNAME cpu -irlen 5  -ircapture 0x1 -irmask 0x1\r
-\r
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]\r
-target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant\r
+# script for Sigma Designs SMP8634 (eventually even SMP8635)
+
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
+   set  _CHIPNAME smp8634
+}
+
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   # force an error till we get a good number
+   set _CPUTAPID 0x08630001
+}
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+reset_config trst_and_srst separate
+
+# jtag scan chain
+# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag newtap $_CHIPNAME cpu -irlen 5  -ircapture 0x1 -irmask 0x1
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant