The STM32L5 and U5 devices have DBGMCU_CR trace related bits changed
wrt other STM32 devices.
Fix the setting in configuration script.
Change-Id: I0bbc48e7b1290b603c6966cf5ddd42df389e6ede
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7117
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
proc _proc_pre_enable_$_CHIPNAME.tpiu {_targetname} {
targets $_targetname
- # Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
- # change this value accordingly to configure trace pins
+ # Set TRACE_EN and TRACE_IOEN in DBGMCU_CR
+ # Leave TRACE_MODE untouched (defaults to async).
+ # When using sync change this value accordingly to configure trace pins
# assignment
- mmw 0xE0044004 0x00000020 0
+ mmw 0xE0044004 0x00000030 0
}
$_CHIPNAME.tpiu configure -event pre-enable "_proc_pre_enable_$_CHIPNAME.tpiu $_TARGETNAME"