flash/nor: flash driver for Synwit SWM050 MCUs
authorCaleb Szalacinski <contact@skiboy.net>
Mon, 19 Aug 2019 22:45:27 +0000 (17:45 -0500)
committerTomas Vanek <vanekt@fbl.cz>
Sun, 8 Sep 2019 10:53:12 +0000 (11:53 +0100)
SWM050 is a series of MCU product by Foshan Synwit Tech, which is
available in TSSOP-8 or SSOP-16 packages.

Adds flash driver for the internal 8KiB flash of the MCU. The registers
are based on reverse engineering the J-Flash blob provided by the
vendor.

Also adds a pre-made cfg file.

Change-Id: I0b29f0c0d062883542ee743e0750a4c6b6609ebd
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Caleb Szalacinski <contact@skiboy.net>
Reviewed-on: http://openocd.zylin.com/4927
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
doc/openocd.texi
src/flash/nor/Makefile.am
src/flash/nor/drivers.c
src/flash/nor/swm050.c [new file with mode: 0644]
tcl/target/swm050.cfg [new file with mode: 0644]

index 9490f88fb56ef94ca21e8daae20d3e47cec09adc..c5a926ca86b5e3a8b7d4075f3451fbfe1d58fd5e 100644 (file)
@@ -7002,6 +7002,23 @@ unlock str9 device.
 
 @end deffn
 
+@deffn {Flash Driver} swm050
+@cindex swm050
+All members of the swm050 microcontroller family from Foshan Synwit Tech.
+
+@example
+flash bank $_FLASHNAME swm050 0x0 0x2000 0 0 $_TARGETNAME
+@end example
+
+One swm050-specific command is defined:
+
+@deffn Command {swm050 mass_erase} bank_id
+Erases the entire flash bank.
+@end deffn
+
+@end deffn
+
+
 @deffn {Flash Driver} tms470
 Most members of the TMS470 microcontroller family from Texas Instruments
 include internal flash and use ARM7TDMI cores.
index 135128ee4f1602e7206b18563a0375080130a263..34f91ce1eab3713105a8892a6ceeb3704cdb51c1 100644 (file)
@@ -63,6 +63,7 @@ NOR_DRIVERS = \
        %D%/str7x.c \
        %D%/str9x.c \
        %D%/str9xpec.c \
+       %D%/swm050.c \
        %D%/tms470.c \
        %D%/virtual.c \
        %D%/w600.c \
index 955d149b5fc9e93b6e8b6b5bd3a4253dff682c2b..551f389de967243fd336c143aed6e3e4dff19d97 100644 (file)
@@ -77,6 +77,7 @@ extern const struct flash_driver stmsmi_flash;
 extern const struct flash_driver str7x_flash;
 extern const struct flash_driver str9x_flash;
 extern const struct flash_driver str9xpec_flash;
+extern const struct flash_driver swm050_flash;
 extern const struct flash_driver tms470_flash;
 extern const struct flash_driver virtual_flash;
 extern const struct flash_driver w600_flash;
@@ -146,6 +147,7 @@ static const struct flash_driver * const flash_drivers[] = {
        &str7x_flash,
        &str9x_flash,
        &str9xpec_flash,
+       &swm050_flash,
        &tms470_flash,
        &virtual_flash,
        &xcf_flash,
diff --git a/src/flash/nor/swm050.c b/src/flash/nor/swm050.c
new file mode 100644 (file)
index 0000000..241207d
--- /dev/null
@@ -0,0 +1,211 @@
+/***************************************************************************
+ *   Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>                    *
+ *   Copyright (C) 2019 Caleb Szalacinski <contact@skiboy.net>             *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "imp.h"
+#include <target/image.h>
+
+#define SWM050_DELAY           100
+
+#define SWM050_FLASH_PAGE_SIZE 0x200
+#define SWM050_FLASH_PAGES     16
+
+#define SWM050_CPU_ID          0xE000ED00
+#define SWM050_CPU_ID_VAL      0x410CC200
+
+#define SWM050_FLASH_REG1      0x1F000000
+#define SWM050_FLASH_REG2      0x1F000038
+#define SWM050_FLASH_KEY       0xAAAAAAAA
+
+#define SWM050_SYSCTL_CFG_0    0x400F0000
+#define SWM050_SYSCTL_DBLF     0x400F0008
+
+static int swm050_erase(struct flash_bank *bank, int first, int last)
+{
+       struct target *target = bank->target;
+       int retval, curr_page;
+       uint32_t curr_addr;
+
+       if (target->state != TARGET_HALTED) {
+               LOG_ERROR("Target not halted");
+               return ERROR_TARGET_NOT_HALTED;
+       }
+
+       /* Perform erase */
+       retval = target_write_u32(target, SWM050_FLASH_REG1, 0x4);
+       if (retval != ERROR_OK)
+               return retval;
+
+       for (curr_page = first; curr_page <= last; curr_page++) {
+               curr_addr = bank->base + (SWM050_FLASH_PAGE_SIZE * curr_page);
+               /* Perform write */
+               retval = target_write_u32(target, curr_addr, SWM050_FLASH_KEY);
+               if (retval != ERROR_OK)
+                       return retval;
+               alive_sleep(SWM050_DELAY);
+       }
+
+       /* Close flash interface */
+       retval = target_write_u32(target, SWM050_FLASH_REG1, 0x0);
+       if (retval != ERROR_OK)
+               return retval;
+
+       return ERROR_OK;
+}
+
+static int swm050_write(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count)
+{
+       struct target *target = bank->target;
+       int retval;
+
+       if (target->state != TARGET_HALTED) {
+               LOG_ERROR("Target not halted");
+               retval = ERROR_TARGET_NOT_HALTED;
+               return retval;
+       }
+
+       /* Perform write */
+       retval = target_write_u32(target, SWM050_FLASH_REG1, 0x1);
+       if (retval != ERROR_OK)
+               return retval;
+
+       retval = target_write_memory(target, bank->base + offset, 4, count/4, buffer);
+       if (retval != ERROR_OK)
+               return retval;
+
+       /* Close flash interface */
+       retval = target_write_u32(target, SWM050_FLASH_REG1, 0x0);
+       if (retval != ERROR_OK)
+               return retval;
+
+       return ERROR_OK;
+}
+
+static int swm050_probe(struct flash_bank *bank)
+{
+       return ERROR_OK;
+}
+
+static int swm050_mass_erase(struct flash_bank *bank)
+{
+       struct target *target = bank->target;
+       int retval;
+
+       if (target->state != TARGET_HALTED) {
+               LOG_ERROR("Target not halted");
+               return ERROR_TARGET_NOT_HALTED;
+       }
+
+       /* Perform mass erase */
+       retval = target_write_u32(target, SWM050_FLASH_REG1, 0x6);
+       if (retval != ERROR_OK)
+               return retval;
+       retval = target_write_u32(target, SWM050_FLASH_REG2, 0x1);
+       if (retval != ERROR_OK)
+               return retval;
+       retval = target_write_u32(target, 0x0, SWM050_FLASH_KEY);
+       if (retval != ERROR_OK)
+               return retval;
+
+       alive_sleep(SWM050_DELAY);
+
+       /* Close flash interface */
+       retval = target_write_u32(target, SWM050_FLASH_REG1, 0x0);
+       if (retval != ERROR_OK)
+               return retval;
+
+       return ERROR_OK;
+}
+
+COMMAND_HANDLER(swm050_handle_mass_erase_command)
+{
+       if (CMD_ARGC < 1)
+               return ERROR_COMMAND_SYNTAX_ERROR;
+
+       struct flash_bank *bank;
+       int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+       if (ERROR_OK != retval)
+               return retval;
+
+       retval = swm050_mass_erase(bank);
+       if (retval == ERROR_OK)
+               command_print(CMD, "swm050 mass erase complete");
+       else
+               command_print(CMD, "swm050 mass erase failed");
+
+       return retval;
+}
+
+FLASH_BANK_COMMAND_HANDLER(swm050_flash_bank_command)
+{
+       if (bank->sectors) {
+               free(bank->sectors);
+               bank->sectors = NULL;
+       }
+       bank->write_start_alignment = 4;
+       bank->write_end_alignment = 4;
+       bank->size = SWM050_FLASH_PAGE_SIZE * SWM050_FLASH_PAGES;
+
+       bank->num_sectors = SWM050_FLASH_PAGES;
+       bank->sectors = alloc_block_array(0, SWM050_FLASH_PAGE_SIZE, SWM050_FLASH_PAGES);
+       if (!bank->sectors)
+               return ERROR_FAIL;
+
+       for (int i = 0; i < bank->num_sectors; i++)
+               bank->sectors[i].is_protected = 0;
+
+       return ERROR_OK;
+}
+
+static const struct command_registration swm050_exec_command_handlers[] = {
+       {
+               .name = "mass_erase",
+               .handler = swm050_handle_mass_erase_command,
+               .mode = COMMAND_EXEC,
+               .usage = "bank_id",
+               .help = "Erase entire flash device.",
+       },
+       COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration swm050_command_handlers[] = {
+       {
+               .name = "swm050",
+               .mode = COMMAND_ANY,
+               .help = "swm050 flash command group",
+               .usage = "",
+               .chain = swm050_exec_command_handlers,
+       },
+       COMMAND_REGISTRATION_DONE
+};
+
+struct flash_driver swm050_flash = {
+       .name = "swm050",
+       .commands = swm050_command_handlers,
+       .flash_bank_command = swm050_flash_bank_command,
+       .erase = swm050_erase,
+       .write = swm050_write,
+       .read = default_flash_read,
+       .probe = swm050_probe,
+       .auto_probe = swm050_probe,
+       .erase_check = default_flash_blank_check,
+       .free_driver_priv = default_flash_free_driver_priv,
+};
diff --git a/tcl/target/swm050.cfg b/tcl/target/swm050.cfg
new file mode 100644 (file)
index 0000000..a819f9c
--- /dev/null
@@ -0,0 +1,45 @@
+# Synwit SWM050
+
+if { [info exists CHIPNAME] } {
+       set _CHIPNAME $CHIPNAME
+} else {
+       set _CHIPNAME swm050
+}
+set _CHIPSERIES swm050
+
+if { [info exists WORKAREASIZE] } {
+       set _WORKAREASIZE $WORKAREASIZE
+} else {
+       set _WORKAREASIZE 0x400
+}
+
+if { [info exists CPUTAPID] } {
+       set _CPUTAPID $CPUTAPID
+} else {
+       set _CPUTAPID 0x410CC200
+}
+
+swd newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME swm050 0x0 0x2000 0 0 $_TARGETNAME
+
+
+$_TARGETNAME configure -event reset-init {
+       # Stop the watchdog, just to be safe
+       mww 0x40019000 0x00
+       # Set clock divider value to 1
+       mww 0x400F0000 0x01
+       # Set system clock to 18Mhz
+       mww 0x400F0008 0x00
+}
+
+# SWM050 (Cortex-M0 core) supports SYSRESETREQ
+if {![using_hla]} {
+    # if srst is not fitted use SYSRESETREQ to
+    # perform a soft reset
+    cortex_m reset_config sysresetreq
+}