flash: print flash bank name on flash info cmd

The flash bank name is a required element in adding flash banks,
however other than looking at the config file there is no way of
getting the name used in openocd.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

diff --git a/src/flash/nor/tcl.c b/src/flash/nor/tcl.c
index 142f31f71f06264302cd49c329f56586ddf1b18e..fe1f85d9e0fcb7153a42316f51502fb037901b90 100644 (file)
--- a/src/flash/nor/tcl.c
+++ b/src/flash/nor/tcl.c
@@ -853,9 +853,9 @@ COMMAND_HANDLER(handle_flash_banks_command)
        unsigned n = 0;
        for (struct flash_bank *p = flash_bank_list(); p; p = p->next, n++)
        {
-               LOG_USER("#%" PRIu32 " : %s at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32 ", "
+               LOG_USER("#%" PRIu32 " : %s (%s) at 0x%8.8" PRIx32 ", size 0x%8.8" PRIx32 ", "
                        "buswidth %u, chipwidth %u", p->bank_number,
-                       p->driver->name, p->base, p->size,
+                       p->name, p->driver->name, p->base, p->size,
                        p->bus_width, p->chip_width);
        }
        return ERROR_OK;