Uwe Hermann <uwe@hermann-uwe.de> spelling fixes

git-svn-id: svn://svn.berlios.de/openocd/trunk@1428 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/target/ixp42x.cfg b/src/target/target/ixp42x.cfg
new file mode 100644 (file)
index 0000000..a24c4fb
--- /dev/null
+++ b/src/target/target/ixp42x.cfg
@@ -0,0 +1,32 @@
+#xscale ixp42x CPU\r
+\r
+\r
+if { [info exists CHIPNAME] } {        \r
+   set  _CHIPNAME $CHIPNAME    \r
+} else {        \r
+   set  _CHIPNAME ixp42x\r
+}\r
+\r
+if { [info exists ENDIAN] } {  \r
+   set  _ENDIAN $ENDIAN    \r
+} else {        \r
+  # this defaults to a bigendian\r
+   set  _ENDIAN big\r
+}\r
+\r
+if { [info exists CPUTAPID ] } {\r
+   set _CPUTAPID $CPUTAPID\r
+} else {\r
+  # force an error till we get a good number\r
+   set _CPUTAPID 0xffffffff\r
+}\r
+\r
+#use combined on interfaces or targets that can?t set TRST/SRST separately\r
+reset_config srst_only srst_pulls_trst\r
+#jtag scan chain\r
+\r
+jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID\r
+\r
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]\r
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x\r
+\r

diff --git a/src/target/target/nslu2.cfg b/src/target/target/nslu2.cfg
index 2ad71174346096bf4ca3d9419c1304288974e93e..529841071b8200070c69167d6a0f2384f88a96b6 100644 (file)
--- a/src/target/target/nslu2.cfg
+++ b/src/target/target/nslu2.cfg
@@ -1,7 +1,7 @@
-# This is for the LinkSys (CYSCO) LSLU2 board
-# It is an Intel XSCALE IPX420 CPU.
+# This is for the LinkSys (CISCO) NSLU2 board
+# It is an Intel XSCALE IXP420 CPU.
 
-source [find target/ipx42x.cfg]
+source [find target/ixp42x.cfg]
 # The _TARGETNAME is set by the above.
 
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0

diff --git a/src/target/target/pxi42x.cfg b/src/target/target/pxi42x.cfg
deleted file mode 100644 (file)
index db0b915..0000000
--- a/src/target/target/pxi42x.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-#xscale ixp42x CPU
-
-
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
-   set  _CHIPNAME ipx42x
-}
-
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
-  # this defaults to a bigendian
-   set  _ENDIAN big
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
-}
-
-#use combined on interfaces or targets that can?t set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-#jtag scan chain
-
-jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ipxP42x
-