-/***************************************************************************\r
- * Copyright (C) 2008 by *\r
- * Karl RobinSod <karl.robinsod@gmail.com> *\r
- * *\r
- * This program is free software; you can redistribute it and/or modify *\r
- * it under the terms of the GNU General Public License as published by *\r
- * the Free Software Foundation; either version 2 of the License, or *\r
- * (at your option) any later version. *\r
- * *\r
- * This program is distributed in the hope that it will be useful, *\r
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *\r
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *\r
- * GNU General Public License for more details. *\r
- * *\r
- * You should have received a copy of the GNU General Public License *\r
- * along with this program; if not, write to the *\r
- * Free Software Foundation, Inc., *\r
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *\r
- ***************************************************************************/\r
-\r
-/***************************************************************************\r
-* There are some things to notice\r
-*\r
-* You need to unprotect flash sectors each time you connect the OpenOCD\r
-* Dumping 1MB takes about 60 Seconds\r
-* Full erase (sectors 0-22 inclusive) takes 2-4 seconds\r
-* Writing 1MB takes 88 seconds\r
-*\r
- ***************************************************************************/\r
-#ifdef HAVE_CONFIG_H\r
-#include "config.h"\r
-#endif\r
-\r
-#include "replacements.h"\r
-\r
-#include "lpc288x.h"\r
-\r
-#include "flash.h"\r
-#include "target.h"\r
-#include "log.h"\r
-#include "binarybuffer.h"\r
-#include "types.h"\r
-\r
-#include <stdlib.h>\r
-#include <string.h>\r
-#include <unistd.h>\r
-\r
-#define LOAD_TIMER_ERASE 0\r
-#define LOAD_TIMER_WRITE 1\r
-\r
-#define FLASH_PAGE_SIZE 512\r
-\r
-/* LPC288X control registers */\r
-#define DBGU_CIDR 0x8000507C\r
-/* LPC288X flash registers */\r
-#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */\r
-#define F_STAT 0x80102004 /* Flash status register RO 0x45 */\r
-#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */\r
-#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */\r
-#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 */\r
-#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */\r
-#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */\r
-#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */\r
-#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */\r
-#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */\r
-#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */\r
-#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power savings. R/W 1*/\r
-#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from Power Down mode. R/W -*/\r
-\r
-/* F_CTRL bits */\r
-#define FC_CS 0x0001 \r
-#define FC_FUNC 0x0002 \r
-#define FC_WEN 0x0004 \r
-#define FC_RD_LATCH 0x0020 \r
-#define FC_PROTECT 0x0080 \r
-#define FC_SET_DATA 0x0400 \r
-#define FC_RSSL 0x0800 \r
-#define FC_PROG_REQ 0x1000 \r
-#define FC_CLR_BUF 0x4000 \r
-#define FC_LOAD_REQ 0x8000 \r
-/* F_STAT bits */\r
-#define FS_DONE 0x0001 \r
-#define FS_PROGGNT 0x0002 \r
-#define FS_RDY 0x0004 \r
-#define FS_ERR 0x0020 \r
-/* F_PROG_TIME */\r
-#define FPT_TIME_MASK 0x7FFF \r
-\r
-#define FPT_ENABLE 0x8000 \r
-/* F_WAIT */\r
-#define FW_WAIT_STATES_MASK 0x00FF\r
-#define FW_SET_MASK 0xC000\r
-\r
-/* F_CLK_TIME */\r
-#define FCT_CLK_DIV_MASK 0x0FFF\r
-\r
-\r
-\r
-int lpc288x_register_commands(struct command_context_s *cmd_ctx);\r
-int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);\r
-int lpc288x_erase(struct flash_bank_s *bank, int first, int last);\r
-int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last);\r
-int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);\r
-int lpc288x_probe(struct flash_bank_s *bank);\r
-int lpc288x_auto_probe(struct flash_bank_s *bank);\r
-int lpc288x_erase_check(struct flash_bank_s *bank);\r
-int lpc288x_protect_check(struct flash_bank_s *bank);\r
-int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size);\r
-void lpc288x_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);\r
-u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout);\r
-void lpc288x_load_timer(int erase, struct target_s *target);\r
-void lpc288x_set_flash_clk(struct flash_bank_s *bank);\r
-u32 lpc288x_system_ready(struct flash_bank_s *bank);\r
-int lpc288x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);\r
-\r
-flash_driver_t lpc288x_flash =\r
-{\r
- .name = "lpc288x",\r
- .register_commands = lpc288x_register_commands,\r
- .flash_bank_command = lpc288x_flash_bank_command,\r
- .erase = lpc288x_erase,\r
- .protect = lpc288x_protect,\r
- .write = lpc288x_write,\r
- .probe = lpc288x_probe,\r
- .auto_probe = lpc288x_probe,\r
- .erase_check = lpc288x_erase_check,\r
- .protect_check = lpc288x_protect_check,\r
- .info = lpc288x_info\r
-};\r
-\r
-\r
-int lpc288x_register_commands(struct command_context_s *cmd_ctx)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-\r
-\r
-u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout)\r
-{\r
- u32 status;\r
- target_t *target = bank->target;\r
- do\r
- {\r
- usleep(1000);\r
- timeout--;\r
- target_read_u32(target, F_STAT, &status);\r
- }while (((status & FS_DONE) == 0) && timeout);\r
-\r
- if(timeout == 0)\r
- {\r
- LOG_DEBUG("Timedout!");\r
- return ERROR_FLASH_OPERATION_FAILED;\r
- }\r
- return ERROR_OK;\r
-}\r
-\r
-/* Read device id register and fill in driver info structure */\r
-int lpc288x_read_part_info(struct flash_bank_s *bank)\r
-{\r
- lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;\r
- target_t *target = bank->target;\r
- u32 cidr, status;\r
- int sectornum;\r
-\r
- int i = 0;\r
- u32 offset;\r
-\r
- if (lpc288x_info->cidr == 0x0102100A)\r
- return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */\r
- \r
- /* Read and parse chip identification register */\r
- target_read_u32(target, DBGU_CIDR, &cidr);\r
- \r
- if (cidr != 0x0102100A)\r
- {\r
- LOG_WARNING("Cannot identify target as an LPC288X (%08X)",cidr);\r
- return ERROR_FLASH_OPERATION_FAILED;\r
- }\r
-\r
- lpc288x_info->cidr = cidr;\r
- lpc288x_info->sector_size_break = 0x000F0000;\r
- lpc288x_info->target_name = "LPC288x";\r
-\r
- /* setup the sector info... */\r
- offset = bank->base;\r
- bank->num_sectors = 23;\r
- bank->sectors = malloc(sizeof(flash_sector_t) * 23);\r
-\r
- for (i = 0; i < 15; i++)\r
- {\r
- bank->sectors[i].offset = offset;\r
- bank->sectors[i].size = 64 * 1024;\r
- offset += bank->sectors[i].size;\r
- bank->sectors[i].is_erased = -1;\r
- bank->sectors[i].is_protected = 1;\r
- }\r
- for (i = 15; i < 23; i++)\r
- {\r
- bank->sectors[i].offset = offset;\r
- bank->sectors[i].size = 8 * 1024;\r
- offset += bank->sectors[i].size;\r
- bank->sectors[i].is_erased = -1;\r
- bank->sectors[i].is_protected = 1;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int lpc288x_protect_check(struct flash_bank_s *bank)\r
-{\r
- return ERROR_OK;\r
-}\r
-\r
-/* flash_bank LPC288x 0 0 0 0 <target#> <cclk>\r
- */\r
-int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)\r
-{\r
- lpc288x_flash_bank_t *lpc288x_info;\r
- int i;\r
- \r
- if (argc < 6)\r
- {\r
- LOG_WARNING("incomplete flash_bank LPC288x configuration");\r
- return ERROR_FLASH_BANK_INVALID;\r
- }\r
- \r
- lpc288x_info = malloc(sizeof(lpc288x_flash_bank_t));\r
- bank->driver_priv = lpc288x_info;\r
- \r
- /* part wasn't probed for info yet */\r
- lpc288x_info->cidr = 0;\r
- lpc288x_info->cclk = strtoul(args[6], NULL, 0);\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-/*\r
-The frequency is the AHB clock frequency divided by (CLK_DIV ×\r
-3) + 1. This must be programmed such that the Flash\r
-Programming clock frequency is 66 kHz ± 20%.\r
- AHB = 12 MHz ?\r
- 12000000/66000 = 182\r
- CLK_DIV = 60 ?\r
-*/\r
-void lpc288x_set_flash_clk(struct flash_bank_s *bank)\r
-{\r
- u32 clk_time;\r
- lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;\r
- clk_time = (lpc288x_info->cclk / 66000) / 3;\r
- target_write_u32(bank->target, F_CTRL, FC_CS | FC_WEN );\r
- target_write_u32(bank->target, F_CLK_TIME, clk_time);\r
-}\r
-\r
-/*\r
-AHB tcyc (in ns) 83 ns\r
-\r
-LOAD_TIMER_ERASE FPT_TIME = ((400,000,000 / AHB tcyc (in ns)) - 2) / 512\r
- = 9412 (9500) (AN10548 9375)\r
-LOAD_TIMER_WRITE FPT_TIME = ((1,000,000 / AHB tcyc (in ns)) - 2) / 512\r
- = 23 (75) (AN10548 72 - is this wrong?)\r
- \r
-TODO: Sort out timing calcs ;)\r
-*/\r
-void lpc288x_load_timer(int erase, struct target_s *target)\r
-{\r
- if(erase == LOAD_TIMER_ERASE)\r
- {\r
- target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 9500);\r
- }\r
- else\r
- {\r
- target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 75);\r
- }\r
-}\r
-\r
-\r
-\r
-u32 lpc288x_system_ready(struct flash_bank_s *bank)\r
-{\r
- lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;\r
- if (lpc288x_info->cidr == 0)\r
- {\r
- return ERROR_FLASH_BANK_NOT_PROBED;\r
- }\r
-\r
- if (bank->target->state != TARGET_HALTED)\r
- {\r
- return ERROR_TARGET_NOT_HALTED;\r
- }\r
- return ERROR_OK;\r
-}\r
-\r
-int lpc288x_erase_check(struct flash_bank_s *bank)\r
-{\r
- u32 buffer, test_bytes;\r
- u32 addr, sector, i, status = lpc288x_system_ready(bank); /* probed? halted? */\r
- if(status != ERROR_OK)\r
- {\r
- LOG_INFO("Processor not halted/not probed");\r
- return status;\r
- }\r
-\r
- return ERROR_OK;\r
-}\r
-\r
-int lpc288x_erase(struct flash_bank_s *bank, int first, int last)\r
-{\r
- u32 status;\r
- int sector;\r
- target_t *target = bank->target;\r
-\r
- status = lpc288x_system_ready(bank); /* probed? halted? */\r
- if(status != ERROR_OK)\r
- {\r
- return status;\r
- }\r
- \r
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))\r
- {\r
- LOG_INFO("Bad sector range");\r
- return ERROR_FLASH_SECTOR_INVALID;\r
- }\r
-\r
- /* Configure the flash controller timing */\r
- lpc288x_set_flash_clk(bank);\r
-\r
- for (sector = first; sector <= last; sector++)\r
- {\r
- if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)\r
- {\r
- return ERROR_FLASH_OPERATION_FAILED;\r
- }\r
-\r
- lpc288x_load_timer(LOAD_TIMER_ERASE,target);\r
- \r
- target_write_u32( target,\r
- bank->sectors[sector].offset,\r
- 0x00);\r
- \r
- target_write_u32( target,\r
- F_CTRL,\r
- FC_PROG_REQ |\r
- FC_PROTECT |\r
- FC_CS);\r
- }\r
- if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)\r
- {\r
- return ERROR_FLASH_OPERATION_FAILED;\r
- }\r
- return ERROR_OK;\r
-\r
-}\r
-\r
-\r
-int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)\r
-{\r
- u8 page_buffer[FLASH_PAGE_SIZE];\r
- u32 i, status, source_offset,dest_offset;\r
- target_t *target = bank->target;\r
- u32 bytes_remaining = count;\r
- u32 first_sector, last_sector, sector, page;\r
-\r
- /* probed? halted? */\r
- status = lpc288x_system_ready(bank); \r
- if(status != ERROR_OK)\r
- {\r
- return status;\r
- }\r
-\r
- /* Initialise search indices */\r
- first_sector = last_sector = 0xffffffff;\r
- \r
- /* validate the write range... */\r
- for(i = 0; i < bank->num_sectors; i++)\r
- {\r
- if((offset >= bank->sectors[i].offset) &&\r
- (offset < (bank->sectors[i].offset + bank->sectors[i].size)) &&\r
- (first_sector == 0xffffffff))\r
- {\r
- first_sector = i;\r
- /* all writes must start on a sector boundary... */\r
- if (offset % bank->sectors[i].size)\r
- {\r
- LOG_INFO("offset 0x%x breaks required alignment 0x%x", offset, bank->sectors[i].size);\r
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;\r
- }\r
- }\r
- if(((offset + count) > bank->sectors[i].offset) &&\r
- ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) &&\r
- (last_sector == 0xffffffff))\r
- {\r
- last_sector = i;\r
- }\r
- }\r
- \r
- /* Range check... */\r
- if (first_sector == 0xffffffff || last_sector == 0xffffffff)\r
- {\r
- LOG_INFO("Range check failed %x %x", offset, count);\r
- return ERROR_FLASH_DST_OUT_OF_BANK;\r
- }\r
- \r
- /* Configure the flash controller timing */\r
- lpc288x_set_flash_clk(bank); \r
-\r
- /* initialise the offsets */\r
- source_offset = 0;\r
- dest_offset = 0;\r
- \r
- for (sector=first_sector; sector<=last_sector; sector++)\r
- {\r
- for(page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++)\r
- {\r
- if(bytes_remaining == 0)\r
- {\r
- count = 0;\r
- memset(page_buffer, 0xFF, FLASH_PAGE_SIZE);\r
- }\r
- else if (bytes_remaining < FLASH_PAGE_SIZE)\r
- {\r
- count = bytes_remaining;\r
- memset(page_buffer, 0xFF, FLASH_PAGE_SIZE);\r
- memcpy(page_buffer, &buffer[source_offset], count);\r
- }\r
- else\r
- {\r
- count = FLASH_PAGE_SIZE;\r
- memcpy(page_buffer, &buffer[source_offset], count);\r
- }\r
-\r
- /* Wait for flash to become ready */\r
- if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)\r
- {\r
- return ERROR_FLASH_OPERATION_FAILED;\r
- }\r
- \r
- /* fill flash data latches with 1's */\r
- target_write_u32(target, F_CTRL,\r
- FC_CS |\r
- FC_SET_DATA |\r
- FC_WEN |\r
- FC_FUNC );\r
-\r
- target_write_u32(target, F_CTRL,\r
- FC_CS |\r
- FC_WEN |\r
- FC_FUNC );\r
- /*would be better to use the clean target_write_buffer() interface but\r
- it seems not to be a LOT slower....\r
- bulk_write_memory() is no quicker :(*/\r
-#if 1\r
- if (target->type->write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK)\r
- {\r
- LOG_ERROR("Write failed s %x p %x", sector, page);\r
- return ERROR_FLASH_OPERATION_FAILED;\r
- }\r
-#else\r
- if(target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, page_buffer) != ERROR_OK)\r
- {\r
- LOG_INFO("Write to flash buffer failed");\r
- return ERROR_FLASH_OPERATION_FAILED;\r
- }\r
-#endif\r
- dest_offset += FLASH_PAGE_SIZE;\r
- source_offset += count;\r
- bytes_remaining -= count;\r
-\r
- lpc288x_load_timer(LOAD_TIMER_WRITE, target);\r
- \r
- target_write_u32( target,\r
- F_CTRL,\r
- FC_PROG_REQ |\r
- FC_PROTECT |\r
- FC_FUNC |\r
- FC_CS);\r
- \r
- \r
- } \r
- }\r
- \r
- return ERROR_OK;\r
-}\r
-\r
-\r
-int lpc288x_probe(struct flash_bank_s *bank)\r
-{\r
- /* we only deal with LPC2888 so flash config is fixed\r
- */\r
- lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;\r
- int retval;\r
-\r
- if (lpc288x_info->cidr != 0)\r
- {\r
- return ERROR_OK; /* already probed */\r
- }\r
-\r
- if (bank->target->state != TARGET_HALTED)\r
- {\r
- return ERROR_TARGET_NOT_HALTED;\r
- }\r
-\r
- retval = lpc288x_read_part_info(bank);\r
- if (retval != ERROR_OK)\r
- return retval;\r
- \r
- return ERROR_OK;\r
-}\r
-\r
-\r
-int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size)\r
-{\r
- snprintf(buf, buf_size, "lpc288x flash driver");\r
- return ERROR_OK;\r
-}\r
-\r
-int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last)\r
-{\r
- int lockregion, status;\r
- u32 value;\r
- target_t *target = bank->target;\r
- \r
- /* probed? halted? */\r
- status = lpc288x_system_ready(bank); \r
- if(status != ERROR_OK)\r
- {\r
- return status;\r
- }\r
- \r
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))\r
- {\r
- return ERROR_FLASH_SECTOR_INVALID;\r
- }\r
-\r
- /* Configure the flash controller timing */\r
- lpc288x_set_flash_clk(bank); \r
-\r
- for (lockregion = first; lockregion <= last; lockregion++)\r
- {\r
- if(set)\r
- {\r
- /* write an odd value to base addy to protect... */\r
- value = 0x01;\r
- }\r
- else\r
- {\r
- /* write an even value to base addy to unprotect... */\r
- value = 0x00;\r
- }\r
- target_write_u32( target,\r
- bank->sectors[lockregion].offset,\r
- value);\r
- \r
- target_write_u32( target,\r
- F_CTRL,\r
- FC_LOAD_REQ |\r
- FC_PROTECT |\r
- FC_WEN |\r
- FC_FUNC |\r
- FC_CS);\r
- }\r
- \r
- return ERROR_OK;\r
-}\r
-\r
+/***************************************************************************
+ * Copyright (C) 2008 by *
+ * Karl RobinSod <karl.robinsod@gmail.com> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+/***************************************************************************
+* There are some things to notice
+*
+* You need to unprotect flash sectors each time you connect the OpenOCD
+* Dumping 1MB takes about 60 Seconds
+* Full erase (sectors 0-22 inclusive) takes 2-4 seconds
+* Writing 1MB takes 88 seconds
+*
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "lpc288x.h"
+
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "binarybuffer.h"
+#include "types.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#define LOAD_TIMER_ERASE 0
+#define LOAD_TIMER_WRITE 1
+
+#define FLASH_PAGE_SIZE 512
+
+/* LPC288X control registers */
+#define DBGU_CIDR 0x8000507C
+/* LPC288X flash registers */
+#define F_CTRL 0x80102000 /* Flash control register R/W 0x5 */
+#define F_STAT 0x80102004 /* Flash status register RO 0x45 */
+#define F_PROG_TIME 0x80102008 /* Flash program time register R/W 0 */
+#define F_WAIT 0x80102010 /* Flash read wait state register R/W 0xC004 */
+#define F_CLK_TIME 0x8010201C /* Flash clock divider for 66 kHz generation R/W 0 */
+#define F_INTEN_CLR 0x80102FD8 /* Clear interrupt enable bits WO - */
+#define F_INTEN_SET 0x80102FDC /* Set interrupt enable bits WO - */
+#define F_INT_STAT 0x80102FE0 /* Interrupt status bits RO 0 */
+#define F_INTEN 0x80102FE4 /* Interrupt enable bits RO 0 */
+#define F_INT_CLR 0x80102FE8 /* Clear interrupt status bits WO */
+#define F_INT_SET 0x80102FEC /* Set interrupt status bits WO - */
+#define FLASH_PD 0x80005030 /* Allows turning off the Flash memory for power savings. R/W 1*/
+#define FLASH_INIT 0x80005034 /* Monitors Flash readiness, such as recovery from Power Down mode. R/W -*/
+
+/* F_CTRL bits */
+#define FC_CS 0x0001
+#define FC_FUNC 0x0002
+#define FC_WEN 0x0004
+#define FC_RD_LATCH 0x0020
+#define FC_PROTECT 0x0080
+#define FC_SET_DATA 0x0400
+#define FC_RSSL 0x0800
+#define FC_PROG_REQ 0x1000
+#define FC_CLR_BUF 0x4000
+#define FC_LOAD_REQ 0x8000
+/* F_STAT bits */
+#define FS_DONE 0x0001
+#define FS_PROGGNT 0x0002
+#define FS_RDY 0x0004
+#define FS_ERR 0x0020
+/* F_PROG_TIME */
+#define FPT_TIME_MASK 0x7FFF
+
+#define FPT_ENABLE 0x8000
+/* F_WAIT */
+#define FW_WAIT_STATES_MASK 0x00FF
+#define FW_SET_MASK 0xC000
+
+/* F_CLK_TIME */
+#define FCT_CLK_DIV_MASK 0x0FFF
+
+
+
+int lpc288x_register_commands(struct command_context_s *cmd_ctx);
+int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int lpc288x_erase(struct flash_bank_s *bank, int first, int last);
+int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last);
+int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int lpc288x_probe(struct flash_bank_s *bank);
+int lpc288x_auto_probe(struct flash_bank_s *bank);
+int lpc288x_erase_check(struct flash_bank_s *bank);
+int lpc288x_protect_check(struct flash_bank_s *bank);
+int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size);
+void lpc288x_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);
+u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout);
+void lpc288x_load_timer(int erase, struct target_s *target);
+void lpc288x_set_flash_clk(struct flash_bank_s *bank);
+u32 lpc288x_system_ready(struct flash_bank_s *bank);
+int lpc288x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t lpc288x_flash =
+{
+ .name = "lpc288x",
+ .register_commands = lpc288x_register_commands,
+ .flash_bank_command = lpc288x_flash_bank_command,
+ .erase = lpc288x_erase,
+ .protect = lpc288x_protect,
+ .write = lpc288x_write,
+ .probe = lpc288x_probe,
+ .auto_probe = lpc288x_probe,
+ .erase_check = lpc288x_erase_check,
+ .protect_check = lpc288x_protect_check,
+ .info = lpc288x_info
+};
+
+
+int lpc288x_register_commands(struct command_context_s *cmd_ctx)
+{
+ return ERROR_OK;
+}
+
+
+
+u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout)
+{
+ u32 status;
+ target_t *target = bank->target;
+ do
+ {
+ usleep(1000);
+ timeout--;
+ target_read_u32(target, F_STAT, &status);
+ }while (((status & FS_DONE) == 0) && timeout);
+
+ if(timeout == 0)
+ {
+ LOG_DEBUG("Timedout!");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+}
+
+/* Read device id register and fill in driver info structure */
+int lpc288x_read_part_info(struct flash_bank_s *bank)
+{
+ lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 cidr, status;
+ int sectornum;
+
+ int i = 0;
+ u32 offset;
+
+ if (lpc288x_info->cidr == 0x0102100A)
+ return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */
+
+ /* Read and parse chip identification register */
+ target_read_u32(target, DBGU_CIDR, &cidr);
+
+ if (cidr != 0x0102100A)
+ {
+ LOG_WARNING("Cannot identify target as an LPC288X (%08X)",cidr);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ lpc288x_info->cidr = cidr;
+ lpc288x_info->sector_size_break = 0x000F0000;
+ lpc288x_info->target_name = "LPC288x";
+
+ /* setup the sector info... */
+ offset = bank->base;
+ bank->num_sectors = 23;
+ bank->sectors = malloc(sizeof(flash_sector_t) * 23);
+
+ for (i = 0; i < 15; i++)
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 64 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ for (i = 15; i < 23; i++)
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 8 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+
+ return ERROR_OK;
+}
+
+int lpc288x_protect_check(struct flash_bank_s *bank)
+{
+ return ERROR_OK;
+}
+
+/* flash_bank LPC288x 0 0 0 0 <target#> <cclk>
+ */
+int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ lpc288x_flash_bank_t *lpc288x_info;
+ int i;
+
+ if (argc < 6)
+ {
+ LOG_WARNING("incomplete flash_bank LPC288x configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ lpc288x_info = malloc(sizeof(lpc288x_flash_bank_t));
+ bank->driver_priv = lpc288x_info;
+
+ /* part wasn't probed for info yet */
+ lpc288x_info->cidr = 0;
+ lpc288x_info->cclk = strtoul(args[6], NULL, 0);
+
+ return ERROR_OK;
+}
+
+/*
+The frequency is the AHB clock frequency divided by (CLK_DIV ×
+3) + 1. This must be programmed such that the Flash
+Programming clock frequency is 66 kHz ± 20%.
+ AHB = 12 MHz ?
+ 12000000/66000 = 182
+ CLK_DIV = 60 ?
+*/
+void lpc288x_set_flash_clk(struct flash_bank_s *bank)
+{
+ u32 clk_time;
+ lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
+ clk_time = (lpc288x_info->cclk / 66000) / 3;
+ target_write_u32(bank->target, F_CTRL, FC_CS | FC_WEN );
+ target_write_u32(bank->target, F_CLK_TIME, clk_time);
+}
+
+/*
+AHB tcyc (in ns) 83 ns
+
+LOAD_TIMER_ERASE FPT_TIME = ((400,000,000 / AHB tcyc (in ns)) - 2) / 512
+ = 9412 (9500) (AN10548 9375)
+LOAD_TIMER_WRITE FPT_TIME = ((1,000,000 / AHB tcyc (in ns)) - 2) / 512
+ = 23 (75) (AN10548 72 - is this wrong?)
+
+TODO: Sort out timing calcs ;)
+*/
+void lpc288x_load_timer(int erase, struct target_s *target)
+{
+ if(erase == LOAD_TIMER_ERASE)
+ {
+ target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 9500);
+ }
+ else
+ {
+ target_write_u32(target, F_PROG_TIME, FPT_ENABLE | 75);
+ }
+}
+
+
+
+u32 lpc288x_system_ready(struct flash_bank_s *bank)
+{
+ lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
+ if (lpc288x_info->cidr == 0)
+ {
+ return ERROR_FLASH_BANK_NOT_PROBED;
+ }
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+ return ERROR_OK;
+}
+
+int lpc288x_erase_check(struct flash_bank_s *bank)
+{
+ u32 buffer, test_bytes;
+ u32 addr, sector, i, status = lpc288x_system_ready(bank); /* probed? halted? */
+ if(status != ERROR_OK)
+ {
+ LOG_INFO("Processor not halted/not probed");
+ return status;
+ }
+
+ return ERROR_OK;
+}
+
+int lpc288x_erase(struct flash_bank_s *bank, int first, int last)
+{
+ u32 status;
+ int sector;
+ target_t *target = bank->target;
+
+ status = lpc288x_system_ready(bank); /* probed? halted? */
+ if(status != ERROR_OK)
+ {
+ return status;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ LOG_INFO("Bad sector range");
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ /* Configure the flash controller timing */
+ lpc288x_set_flash_clk(bank);
+
+ for (sector = first; sector <= last; sector++)
+ {
+ if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ lpc288x_load_timer(LOAD_TIMER_ERASE,target);
+
+ target_write_u32( target,
+ bank->sectors[sector].offset,
+ 0x00);
+
+ target_write_u32( target,
+ F_CTRL,
+ FC_PROG_REQ |
+ FC_PROTECT |
+ FC_CS);
+ }
+ if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+
+}
+
+
+int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ u8 page_buffer[FLASH_PAGE_SIZE];
+ u32 i, status, source_offset,dest_offset;
+ target_t *target = bank->target;
+ u32 bytes_remaining = count;
+ u32 first_sector, last_sector, sector, page;
+
+ /* probed? halted? */
+ status = lpc288x_system_ready(bank);
+ if(status != ERROR_OK)
+ {
+ return status;
+ }
+
+ /* Initialise search indices */
+ first_sector = last_sector = 0xffffffff;
+
+ /* validate the write range... */
+ for(i = 0; i < bank->num_sectors; i++)
+ {
+ if((offset >= bank->sectors[i].offset) &&
+ (offset < (bank->sectors[i].offset + bank->sectors[i].size)) &&
+ (first_sector == 0xffffffff))
+ {
+ first_sector = i;
+ /* all writes must start on a sector boundary... */
+ if (offset % bank->sectors[i].size)
+ {
+ LOG_INFO("offset 0x%x breaks required alignment 0x%x", offset, bank->sectors[i].size);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+ }
+ if(((offset + count) > bank->sectors[i].offset) &&
+ ((offset + count) <= (bank->sectors[i].offset + bank->sectors[i].size)) &&
+ (last_sector == 0xffffffff))
+ {
+ last_sector = i;
+ }
+ }
+
+ /* Range check... */
+ if (first_sector == 0xffffffff || last_sector == 0xffffffff)
+ {
+ LOG_INFO("Range check failed %x %x", offset, count);
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+ }
+
+ /* Configure the flash controller timing */
+ lpc288x_set_flash_clk(bank);
+
+ /* initialise the offsets */
+ source_offset = 0;
+ dest_offset = 0;
+
+ for (sector=first_sector; sector<=last_sector; sector++)
+ {
+ for(page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++)
+ {
+ if(bytes_remaining == 0)
+ {
+ count = 0;
+ memset(page_buffer, 0xFF, FLASH_PAGE_SIZE);
+ }
+ else if (bytes_remaining < FLASH_PAGE_SIZE)
+ {
+ count = bytes_remaining;
+ memset(page_buffer, 0xFF, FLASH_PAGE_SIZE);
+ memcpy(page_buffer, &buffer[source_offset], count);
+ }
+ else
+ {
+ count = FLASH_PAGE_SIZE;
+ memcpy(page_buffer, &buffer[source_offset], count);
+ }
+
+ /* Wait for flash to become ready */
+ if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* fill flash data latches with 1's */
+ target_write_u32(target, F_CTRL,
+ FC_CS |
+ FC_SET_DATA |
+ FC_WEN |
+ FC_FUNC );
+
+ target_write_u32(target, F_CTRL,
+ FC_CS |
+ FC_WEN |
+ FC_FUNC );
+ /*would be better to use the clean target_write_buffer() interface but
+ it seems not to be a LOT slower....
+ bulk_write_memory() is no quicker :(*/
+#if 1
+ if (target->type->write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK)
+ {
+ LOG_ERROR("Write failed s %x p %x", sector, page);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+#else
+ if(target_write_buffer(target, offset + dest_offset, FLASH_PAGE_SIZE, page_buffer) != ERROR_OK)
+ {
+ LOG_INFO("Write to flash buffer failed");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+#endif
+ dest_offset += FLASH_PAGE_SIZE;
+ source_offset += count;
+ bytes_remaining -= count;
+
+ lpc288x_load_timer(LOAD_TIMER_WRITE, target);
+
+ target_write_u32( target,
+ F_CTRL,
+ FC_PROG_REQ |
+ FC_PROTECT |
+ FC_FUNC |
+ FC_CS);
+
+
+ }
+ }
+
+ return ERROR_OK;
+}
+
+
+int lpc288x_probe(struct flash_bank_s *bank)
+{
+ /* we only deal with LPC2888 so flash config is fixed
+ */
+ lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
+ int retval;
+
+ if (lpc288x_info->cidr != 0)
+ {
+ return ERROR_OK; /* already probed */
+ }
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = lpc288x_read_part_info(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
+}
+
+
+int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ snprintf(buf, buf_size, "lpc288x flash driver");
+ return ERROR_OK;
+}
+
+int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ int lockregion, status;
+ u32 value;
+ target_t *target = bank->target;
+
+ /* probed? halted? */
+ status = lpc288x_system_ready(bank);
+ if(status != ERROR_OK)
+ {
+ return status;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ /* Configure the flash controller timing */
+ lpc288x_set_flash_clk(bank);
+
+ for (lockregion = first; lockregion <= last; lockregion++)
+ {
+ if(set)
+ {
+ /* write an odd value to base addy to protect... */
+ value = 0x01;
+ }
+ else
+ {
+ /* write an even value to base addy to unprotect... */
+ value = 0x00;
+ }
+ target_write_u32( target,
+ bank->sectors[lockregion].offset,
+ value);
+
+ target_write_u32( target,
+ F_CTRL,
+ FC_LOAD_REQ |
+ FC_PROTECT |
+ FC_WEN |
+ FC_FUNC |
+ FC_CS);
+ }
+
+ return ERROR_OK;
+}
+
projects / fw / openocd / commitdiff