Typos in config files found by Sergey Lapin

git-svn-id: svn://svn.berlios.de/openocd/trunk@1220 b42882b7-edfa-0310-969c-e2dbd0fdcd60

diff --git a/src/target/target/at91r40008.cfg b/src/target/target/at91r40008.cfg
index 48317c8684c9f0631e2ad39a70984abdf5f1e188..f8f5d410600643da8b76c10e66bdb457e74e68b2 100644 (file)
--- a/src/target/target/at91r40008.cfg
+++ b/src/target/target/at91r40008.cfg
@@ -29,7 +29,7 @@ reset_config srst_only srst_pulls_trst
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGENAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
 
 
 $_TARGETNAME configure -event gdb-flash-erase-start {

diff --git a/src/target/target/at91sam9260.cfg b/src/target/target/at91sam9260.cfg
index d7c8833cec9138ca62cafb3027a7b467e078565f..05500ab5a1836690106754947dab1910cdbf8e38 100644 (file)
--- a/src/target/target/at91sam9260.cfg
+++ b/src/target/target/at91sam9260.cfg
@@ -9,7 +9,7 @@ source [find target/at91sam9260minimal.cfg]
 # Target configuration
 ######################
 
-$_TARGET_NAME configure -event reset-init {
+$_TARGETNAME configure -event reset-init {
        # at reset chip runs at 32khz
        jtag_khz 8
        mww 0xfffffd08 0xa5000501         # RSTC_MR : enable user reset

diff --git a/src/target/target/at91sam9260minimal.cfg b/src/target/target/at91sam9260minimal.cfg
index 93114d8027d8bb97bca75c375f9de3cb26de0891..4d51831da313c46bb1723b85e6b1272feba99636 100644 (file)
--- a/src/target/target/at91sam9260minimal.cfg
+++ b/src/target/target/at91sam9260minimal.cfg
@@ -18,7 +18,7 @@ if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
   # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
+   set _CPUTAPID 0x0792603f
 }
 
 reset_config trst_and_srst
@@ -37,6 +37,6 @@ set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
 
 # Internal sram1 memory
-$_TARGET_NAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1