\f
Page 2
-
-
+
+
P R E F A C E
from the DECUS C distribution has been largely rewritten, only
the program structure, and C source file organization remains
relatively unchanged. However, I wish to thank the author for
- his contribution to this set of assemblers.
+ his contribution to this set of assemblers.
The ASLINK program was written as a companion to the ASxxxx
assemblers, its design and implementation was not derived from
- any other work.
+ any other work.
The ASxxxx assemblers and the ASLINK relocating linker are
placed in the Public Domain. Publication or distribution of
these programs for non-commercial use is hereby granted with the
stipulation that the copyright notice be included with all
- copies.
+ copies.
I would greatly appreciate receiving the details of any
changes, additions, or errors pertaining to these programs and
will attempt to incorporate any fixes or generally useful
- changes in a future update to these programs.
+ changes in a future update to these programs.
- Alan R. Baldwin
- Kent State University
- Physics Department
- Kent, Ohio 44242
- U.S.A.
+ Alan R. Baldwin
+ Kent State University
+ Physics Department
+ Kent, Ohio 44242
+ U.S.A.
- http://shop-pdp.kent.edu/ashtml/asxxxx.htm
+ http://shop-pdp.kent.edu/ashtml/asxxxx.htm
- baldwin@shop-pdp.kent.edu
- tel: (330) 672 2531
- fax: (330) 672 2959
+ baldwin@shop-pdp.kent.edu
+ tel: (330) 672 2531
+ fax: (330) 672 2959
\f
Page 3
-
-
+
+
Thanks to Marko Makela for his contribution of the AS6500
- cross assembler.
+ cross assembler.
Marko Makela
Sillitie 10 A
Thanks to John Hartman for his contribution of the AS8051
- cross assembler and updates to the ASxxxx and ASLINK internals.
+ cross assembler and updates to the ASxxxx and ASLINK internals.
John L. Hartman
jhartman@compuserve.com
Thanks to G. Osborn for his contributions to LKS19.C and
- LKIHX.C.
+ LKIHX.C.
G. Osborn
gary@s-4.com
\f
Page 4
-
- ASxxxx Cross Assemblers, Version 2.00, August 1998
- Submitted by Alan R. Baldwin,
- Kent State University, Kent, Ohio
+ ASxxxx Cross Assemblers, Version 2.00, August 1998
- Operating System: TSX+, RT-11, MS/DOS, PDOS
- or other supporting K&R C.
+ Submitted by Alan R. Baldwin,
+ Kent State University, Kent, Ohio
- Source Langauge: C
+ Operating System: TSX+, RT-11, MS/DOS, PDOS
+ or other supporting K&R C.
- Abstract:
+ Source Langauge: C
+
+ Abstract:
The ASxxxx assemblers are a series of microprocessor assem-
blers written in the C programming language. This collection
sion information, (2) a table of assembler general directives,
special directives, assembler mnemonics and associated operation
codes, (3) machine specific code for processing the device
- mnemonics, addressing modes, and special directives.
+ mnemonics, addressing modes, and special directives.
The assemblers have a common device independent section which
handles the details of file input/output, symbol table genera-
tion, program/data areas, expression analysis, and assembler
- directive processing.
+ directive processing.
The assemblers provide the following features: (1) alpha-
betized, formatted symbol table listings, (2) relocatable object
modules, (3) global symbols for linking object modules, (4) con-
ditional assembly directives, (5) reusable local symbols, and
- (6) include-file processing.
+ (6) include-file processing.
The companion program ASLINK is a relocating linker perform-
ing the following functions: (1) bind multiple object modules
time, (8) produce Intel Hex or Motorola S19 output file, (9)
produce a map of the linked memory image, and (10) update the
ASxxxx assembler listing files with the absolute linked ad-
- dresses and data.
+ dresses and data.
The assemblers and linker have been tested using DECUS C
under TSX+ and RT-11, PDOS C V5.4b, and Symantec C/C++ V6.1/V7.2
bution. Additionally, test code for each assembler and several
microprocessor monitors ( ASSIST05 for the 6805, MONDEB and
ASSIST09 for the 6809, and BUFFALO 2.5 for the 6811) are in-
- cluded as working examples of use of these assemblers.
-\f
-
- CHAPTER 1 THE ASSEMBLER 1-1
- 1.1 THE ASXXXX ASSEMBLERS 1-1
- 1.1.1 Assembly Pass 1 1-2
- 1.1.2 Assembly Pass 2 1-2
- 1.1.3 Assembly Pass 3 1-2
- 1.2 SOURCE PROGRAM FORMAT 1-3
- 1.2.1 Statement Format 1-3
- 1.2.1.1 Label Field 1-3
- 1.2.1.2 Operator Field 1-5
- 1.2.1.3 Operand Field 1-5
- 1.2.1.4 Comment Field 1-6
- 1.3 SYMBOLS AND EXPRESSIONS 1-6
- 1.3.1 Character Set 1-6
- 1.3.2 User-Defined Symbols 1-10
- 1.3.3 Local Symbols 1-11
- 1.3.4 Current Location Counter 1-12
- 1.3.5 Numbers 1-14
- 1.3.6 Terms 1-14
- 1.3.7 Expressions 1-15
- 1.4 GENERAL ASSEMBLER DIRECTIVES 1-16
- 1.4.1 .module Directive 1-16
- 1.4.2 .title Directive 1-17
- 1.4.3 .sbttl Directive 1-17
- 1.4.4 .page Directive 1-17
- 1.4.5 .byte and .db Directives 1-17
- 1.4.6 .word and .dw Directives 1-18
- 1.4.7 .blkb, .blkw, and .ds Directives 1-18
- 1.4.8 .ascii Directive 1-18
- 1.4.9 .ascis Directive 1-19
- 1.4.10 .asciz Directive 1-19
- 1.4.11 .radix Directive 1-20
- 1.4.12 .even Directive 1-20
- 1.4.13 .odd Directive 1-20
- 1.4.14 .area Directive 1-21
- 1.4.15 .org Directive 1-22
- 1.4.16 .globl Directive 1-23
- 1.4.17 .if, .else, and .endif Directives 1-23
- 1.4.18 .include Directive 1-24
- 1.4.19 .setdp Directive 1-25
- 1.5 INVOKING ASXXXX 1-27
- 1.6 ERRORS 1-28
- 1.7 LISTING FILE 1-29
- 1.8 SYMBOL TABLE FILE 1-30
- 1.9 OBJECT FILE 1-31
-
- CHAPTER 2 THE LINKER 2-1
- 2.1 ASLINK RELOCATING LINKER 2-1
- 2.2 INVOKING ASLINK 2-2
- 2.3 LIBRARY PATH(S) AND FILE(S) 2-3
- 2.4 ASLINK PROCESSING 2-4
- 2.5 LINKER INPUT FORMAT 2-6
- 2.5.1 Object Module Format 2-6
- 2.5.2 Header Line 2-6
- 2.5.3 Module Line 2-7
- 2.5.4 Symbol Line 2-7
- 2.5.5 Area Line 2-7
+ cluded as working examples of use of these assemblers.
+\f
+
+ CHAPTER 1 THE ASSEMBLER 1-1
+ 1.1 THE ASXXXX ASSEMBLERS 1-1
+ 1.1.1 Assembly Pass 1 1-2
+ 1.1.2 Assembly Pass 2 1-2
+ 1.1.3 Assembly Pass 3 1-2
+ 1.2 SOURCE PROGRAM FORMAT 1-3
+ 1.2.1 Statement Format 1-3
+ 1.2.1.1 Label Field 1-3
+ 1.2.1.2 Operator Field 1-5
+ 1.2.1.3 Operand Field 1-5
+ 1.2.1.4 Comment Field 1-6
+ 1.3 SYMBOLS AND EXPRESSIONS 1-6
+ 1.3.1 Character Set 1-6
+ 1.3.2 User-Defined Symbols 1-10
+ 1.3.3 Local Symbols 1-11
+ 1.3.4 Current Location Counter 1-12
+ 1.3.5 Numbers 1-14
+ 1.3.6 Terms 1-14
+ 1.3.7 Expressions 1-15
+ 1.4 GENERAL ASSEMBLER DIRECTIVES 1-16
+ 1.4.1 .module Directive 1-16
+ 1.4.2 .title Directive 1-17
+ 1.4.3 .sbttl Directive 1-17
+ 1.4.4 .page Directive 1-17
+ 1.4.5 .byte and .db Directives 1-17
+ 1.4.6 .word and .dw Directives 1-18
+ 1.4.7 .blkb, .blkw, and .ds Directives 1-18
+ 1.4.8 .ascii Directive 1-18
+ 1.4.9 .ascis Directive 1-19
+ 1.4.10 .asciz Directive 1-19
+ 1.4.11 .radix Directive 1-20
+ 1.4.12 .even Directive 1-20
+ 1.4.13 .odd Directive 1-20
+ 1.4.14 .area Directive 1-21
+ 1.4.15 .org Directive 1-22
+ 1.4.16 .globl Directive 1-23
+ 1.4.17 .if, .else, and .endif Directives 1-23
+ 1.4.18 .include Directive 1-24
+ 1.4.19 .setdp Directive 1-25
+ 1.5 INVOKING ASXXXX 1-27
+ 1.6 ERRORS 1-28
+ 1.7 LISTING FILE 1-29
+ 1.8 SYMBOL TABLE FILE 1-30
+ 1.9 OBJECT FILE 1-31
+
+ CHAPTER 2 THE LINKER 2-1
+ 2.1 ASLINK RELOCATING LINKER 2-1
+ 2.2 INVOKING ASLINK 2-2
+ 2.3 LIBRARY PATH(S) AND FILE(S) 2-3
+ 2.4 ASLINK PROCESSING 2-4
+ 2.5 LINKER INPUT FORMAT 2-6
+ 2.5.1 Object Module Format 2-6
+ 2.5.2 Header Line 2-6
+ 2.5.3 Module Line 2-7
+ 2.5.4 Symbol Line 2-7
+ 2.5.5 Area Line 2-7
\f
Page ii
-
-
-
- 2.5.6 T Line 2-7
- 2.5.7 R Line 2-8
- 2.5.8 P Line 2-8
- 2.6 LINKER ERROR MESSAGES 2-9
- 2.7 INTEL HEX OUTPUT FORMAT 2-11
- 2.8 MOTORLA S1-S9 OUTPUT FORMAT 2-12
-
- CHAPTER 3 BUILDING ASXXXX AND ASLINK 3-1
- 3.1 BUILDING AN ASSEMBLER 3-1
- 3.2 BUILDING ASLINK 3-2
-
- APPENDIX A AS6800 ASSEMBLER A-1
- A.1 6800 REGISTER SET A-1
- A.2 6800 INSTRUCTION SET A-1
- A.2.1 Inherent Instructions A-2
- A.2.2 Branch Instructions A-2
- A.2.3 Single Operand Instructions A-3
- A.2.4 Double Operand Instructions A-4
- A.2.5 Jump and Jump to Subroutine Instructions A-4
- A.2.6 Long Register Instructions A-5
-
- APPENDIX B AS6801 ASSEMBLER B-1
- B.1 .hd6303 DIRECTIVE B-1
- B.2 6801 REGISTER SET B-1
- B.3 6801 INSTRUCTION SET B-1
- B.3.1 Inherent Instructions B-2
- B.3.2 Branch Instructions B-2
- B.3.3 Single Operand Instructions B-3
- B.3.4 Double Operand Instructions B-4
- B.3.5 Jump and Jump to Subroutine Instructions B-5
- B.3.6 Long Register Instructions B-5
- B.3.7 6303 Specific Instructions B-5
-
- APPENDIX C AS6804 ASSEMBLER C-1
- C.1 6804 REGISTER SET C-1
- C.2 6804 INSTRUCTION SET C-1
- C.2.1 Inherent Instructions C-2
- C.2.2 Branch Instructions C-2
- C.2.3 Single Operand Instructions C-2
- C.2.4 Jump and Jump to Subroutine Instructions C-2
- C.2.5 Bit Test Instructions C-2
- C.2.6 Load Immediate data Instruction C-3
- C.2.7 6804 Derived Instructions C-3
-
- APPENDIX D AS6805 ASSEMBLER D-1
- D.1 6805 REGISTER SET D-1
- D.2 6805 INSTRUCTION SET D-1
- D.2.1 Control Instructions D-2
- D.2.2 Bit Manipulation Instructions D-2
- D.2.3 Branch Instructions D-2
- D.2.4 Read-Modify-Write Instructions D-3
- D.2.5 Register\Memory Instructions D-3
+
+
+
+ 2.5.6 T Line 2-7
+ 2.5.7 R Line 2-8
+ 2.5.8 P Line 2-8
+ 2.6 LINKER ERROR MESSAGES 2-9
+ 2.7 INTEL HEX OUTPUT FORMAT 2-11
+ 2.8 MOTORLA S1-S9 OUTPUT FORMAT 2-12
+
+ CHAPTER 3 BUILDING ASXXXX AND ASLINK 3-1
+ 3.1 BUILDING AN ASSEMBLER 3-1
+ 3.2 BUILDING ASLINK 3-2
+
+ APPENDIX A AS6800 ASSEMBLER A-1
+ A.1 6800 REGISTER SET A-1
+ A.2 6800 INSTRUCTION SET A-1
+ A.2.1 Inherent Instructions A-2
+ A.2.2 Branch Instructions A-2
+ A.2.3 Single Operand Instructions A-3
+ A.2.4 Double Operand Instructions A-4
+ A.2.5 Jump and Jump to Subroutine Instructions A-4
+ A.2.6 Long Register Instructions A-5
+
+ APPENDIX B AS6801 ASSEMBLER B-1
+ B.1 .hd6303 DIRECTIVE B-1
+ B.2 6801 REGISTER SET B-1
+ B.3 6801 INSTRUCTION SET B-1
+ B.3.1 Inherent Instructions B-2
+ B.3.2 Branch Instructions B-2
+ B.3.3 Single Operand Instructions B-3
+ B.3.4 Double Operand Instructions B-4
+ B.3.5 Jump and Jump to Subroutine Instructions B-5
+ B.3.6 Long Register Instructions B-5
+ B.3.7 6303 Specific Instructions B-5
+
+ APPENDIX C AS6804 ASSEMBLER C-1
+ C.1 6804 REGISTER SET C-1
+ C.2 6804 INSTRUCTION SET C-1
+ C.2.1 Inherent Instructions C-2
+ C.2.2 Branch Instructions C-2
+ C.2.3 Single Operand Instructions C-2
+ C.2.4 Jump and Jump to Subroutine Instructions C-2
+ C.2.5 Bit Test Instructions C-2
+ C.2.6 Load Immediate data Instruction C-3
+ C.2.7 6804 Derived Instructions C-3
+
+ APPENDIX D AS6805 ASSEMBLER D-1
+ D.1 6805 REGISTER SET D-1
+ D.2 6805 INSTRUCTION SET D-1
+ D.2.1 Control Instructions D-2
+ D.2.2 Bit Manipulation Instructions D-2
+ D.2.3 Branch Instructions D-2
+ D.2.4 Read-Modify-Write Instructions D-3
+ D.2.5 Register\Memory Instructions D-3
\f
Page iii
-
-
-
- D.2.6 Jump and Jump to Subroutine Instructions D-4
-
- APPENDIX E AS6808 ASSEMBLER E-1
- E.1 68HC08 REGISTER SET E-1
- E.2 68HC08 INSTRUCTION SET E-1
- E.2.1 Control Instructions E-2
- E.2.2 Bit Manipulation Instructions E-2
- E.2.3 Branch Instructions E-3
- E.2.4 Complex Branch Instructions E-3
- E.2.5 Read-Modify-Write Instructions E-4
- E.2.6 Register\Memory Instructions E-5
- E.2.7 Double Operand Move Instruction E-5
- E.2.8 16-Bit <H:X> Index Register Instructions E-5
- E.2.9 Jump and Jump to Subroutine Instructions E-5
-
- APPENDIX F AS6809 ASSEMBLER F-1
- F.1 6809 REGISTER SET F-1
- F.2 6809 INSTRUCTION SET F-1
- F.2.1 Inherent Instructions F-3
- F.2.2 Short Branch Instructions F-3
- F.2.3 Long Branch Instructions F-3
- F.2.4 Single Operand Instructions F-4
- F.2.5 Double Operand Instructions F-5
- F.2.6 D-register Instructions F-5
- F.2.7 Index/Stack Register Instructions F-5
- F.2.8 Jump and Jump to Subroutine Instructions F-6
- F.2.9 Register - Register Instructions F-6
- F.2.10 Condition Code Register Instructions F-6
- F.2.11 6800 Compatibility Instructions F-6
-
- APPENDIX G AS6811 ASSEMBLER G-1
- G.1 68HC11 REGISTER SET G-1
- G.2 68HC11 INSTRUCTION SET G-1
- G.2.1 Inherent Instructions G-2
- G.2.2 Branch Instructions G-2
- G.2.3 Single Operand Instructions G-3
- G.2.4 Double Operand Instructions G-4
- G.2.5 Bit Manupulation Instructions G-4
- G.2.6 Jump and Jump to Subroutine Instructions G-5
- G.2.7 Long Register Instructions G-5
-
- APPENDIX H AS6812 ASSEMBLER H-1
- H.1 68HC12 REGISTER SET H-1
- H.2 68HC12 INSTRUCTION SET H-1
- H.2.1 Inherent Instructions H-3
- H.2.2 Short Branch Instructions H-3
- H.2.3 Long Branch Instructions H-3
- H.2.4 Branch on Decrement, Test, or Increment H-4
- H.2.5 Bit Clear and Set Instructions H-4
- H.2.6 Branch on Bit Clear or Set H-4
- H.2.7 Single Operand Instructions H-5
- H.2.8 Double Operand Instructions H-6
+
+
+
+ D.2.6 Jump and Jump to Subroutine Instructions D-4
+
+ APPENDIX E AS6808 ASSEMBLER E-1
+ E.1 68HC08 REGISTER SET E-1
+ E.2 68HC08 INSTRUCTION SET E-1
+ E.2.1 Control Instructions E-2
+ E.2.2 Bit Manipulation Instructions E-2
+ E.2.3 Branch Instructions E-3
+ E.2.4 Complex Branch Instructions E-3
+ E.2.5 Read-Modify-Write Instructions E-4
+ E.2.6 Register\Memory Instructions E-5
+ E.2.7 Double Operand Move Instruction E-5
+ E.2.8 16-Bit <H:X> Index Register Instructions E-5
+ E.2.9 Jump and Jump to Subroutine Instructions E-5
+
+ APPENDIX F AS6809 ASSEMBLER F-1
+ F.1 6809 REGISTER SET F-1
+ F.2 6809 INSTRUCTION SET F-1
+ F.2.1 Inherent Instructions F-3
+ F.2.2 Short Branch Instructions F-3
+ F.2.3 Long Branch Instructions F-3
+ F.2.4 Single Operand Instructions F-4
+ F.2.5 Double Operand Instructions F-5
+ F.2.6 D-register Instructions F-5
+ F.2.7 Index/Stack Register Instructions F-5
+ F.2.8 Jump and Jump to Subroutine Instructions F-6
+ F.2.9 Register - Register Instructions F-6
+ F.2.10 Condition Code Register Instructions F-6
+ F.2.11 6800 Compatibility Instructions F-6
+
+ APPENDIX G AS6811 ASSEMBLER G-1
+ G.1 68HC11 REGISTER SET G-1
+ G.2 68HC11 INSTRUCTION SET G-1
+ G.2.1 Inherent Instructions G-2
+ G.2.2 Branch Instructions G-2
+ G.2.3 Single Operand Instructions G-3
+ G.2.4 Double Operand Instructions G-4
+ G.2.5 Bit Manupulation Instructions G-4
+ G.2.6 Jump and Jump to Subroutine Instructions G-5
+ G.2.7 Long Register Instructions G-5
+
+ APPENDIX H AS6812 ASSEMBLER H-1
+ H.1 68HC12 REGISTER SET H-1
+ H.2 68HC12 INSTRUCTION SET H-1
+ H.2.1 Inherent Instructions H-3
+ H.2.2 Short Branch Instructions H-3
+ H.2.3 Long Branch Instructions H-3
+ H.2.4 Branch on Decrement, Test, or Increment H-4
+ H.2.5 Bit Clear and Set Instructions H-4
+ H.2.6 Branch on Bit Clear or Set H-4
+ H.2.7 Single Operand Instructions H-5
+ H.2.8 Double Operand Instructions H-6
\f
Page iv
-
- H.2.9 Move Instructions H-6
- H.2.10 D-register Instructions H-6
- H.2.11 Index/Stack Register Instructions H-7
+
+ H.2.9 Move Instructions H-6
+ H.2.10 D-register Instructions H-6
+ H.2.11 Index/Stack Register Instructions H-7
H.2.12 Jump and Jump/Call to Subroutine
- Instructions H-7
- H.2.13 Other Special Instructions H-7
- H.2.14 Register - Register Instructions H-7
- H.2.15 Condition Code Register Instructions H-7
- H.2.16 M68HC11 Compatibility Mode Instructions H-8
-
- APPENDIX I AS6816 ASSEMBLER I-1
- I.1 68HC16 REGISTER SET I-1
- I.2 68HC16 INSTRUCTION SET I-1
- I.2.1 Inherent Instructions I-2
- I.2.2 Push/Pull Multiple Register Instructions I-3
- I.2.3 Short Branch Instructions I-3
- I.2.4 Long Branch Instructions I-3
- I.2.5 Bit Manipulation Instructions I-3
- I.2.6 Single Operand Instructions I-4
- I.2.7 Double Operand Instructions I-5
- I.2.8 Index/Stack Register Instructions I-5
- I.2.9 Jump and Jump to Subroutine Instructions I-6
- I.2.10 Condition Code Register Instructions I-6
- I.2.11 Multiply and Accumulate Instructions I-6
-
- APPENDIX J ASH8 ASSEMBLER J-1
- J.1 H8/3XX REGISTER SET J-1
- J.2 H8/3XX INSTRUCTION SET J-1
- J.2.1 Inherent Instructions J-2
- J.2.2 Branch Instructions J-2
- J.2.3 Single Operand Instructions J-3
- J.2.4 Double Operand Instructions J-4
- J.2.5 Mov Instructions J-5
- J.2.6 Bit Manipulation Instructions J-6
- J.2.7 Extended Bit Manipulation Instructions J-7
- J.2.8 Condition Code Instructions J-7
- J.2.9 Other Instructions J-8
- J.2.10 Jump and Jump to Subroutine Instructions J-8
-
- APPENDIX K AS8051 ASSEMBLER K-1
- K.1 ACKNOWLEDGMENT K-1
- K.2 8051 REGISTER SET K-1
- K.3 8051 INSTRUCTION SET K-2
- K.3.1 Inherent Instructions K-2
- K.3.2 Move Instructions K-3
- K.3.3 Single Operand Instructions K-3
- K.3.4 Two Operand Instructions K-4
- K.3.5 Call and Return Instructions K-4
- K.3.6 Jump Instructions K-4
- K.3.7 Predefined Symbols: SFR Map K-5
- K.3.8 Predefined Symbols: SFR Bit Addresses K-6
- K.3.9 Predefined Symbols: Control Bits K-7
+ Instructions H-7
+ H.2.13 Other Special Instructions H-7
+ H.2.14 Register - Register Instructions H-7
+ H.2.15 Condition Code Register Instructions H-7
+ H.2.16 M68HC11 Compatibility Mode Instructions H-8
+
+ APPENDIX I AS6816 ASSEMBLER I-1
+ I.1 68HC16 REGISTER SET I-1
+ I.2 68HC16 INSTRUCTION SET I-1
+ I.2.1 Inherent Instructions I-2
+ I.2.2 Push/Pull Multiple Register Instructions I-3
+ I.2.3 Short Branch Instructions I-3
+ I.2.4 Long Branch Instructions I-3
+ I.2.5 Bit Manipulation Instructions I-3
+ I.2.6 Single Operand Instructions I-4
+ I.2.7 Double Operand Instructions I-5
+ I.2.8 Index/Stack Register Instructions I-5
+ I.2.9 Jump and Jump to Subroutine Instructions I-6
+ I.2.10 Condition Code Register Instructions I-6
+ I.2.11 Multiply and Accumulate Instructions I-6
+
+ APPENDIX J ASH8 ASSEMBLER J-1
+ J.1 H8/3XX REGISTER SET J-1
+ J.2 H8/3XX INSTRUCTION SET J-1
+ J.2.1 Inherent Instructions J-2
+ J.2.2 Branch Instructions J-2
+ J.2.3 Single Operand Instructions J-3
+ J.2.4 Double Operand Instructions J-4
+ J.2.5 Mov Instructions J-5
+ J.2.6 Bit Manipulation Instructions J-6
+ J.2.7 Extended Bit Manipulation Instructions J-7
+ J.2.8 Condition Code Instructions J-7
+ J.2.9 Other Instructions J-8
+ J.2.10 Jump and Jump to Subroutine Instructions J-8
+
+ APPENDIX K AS8051 ASSEMBLER K-1
+ K.1 ACKNOWLEDGMENT K-1
+ K.2 8051 REGISTER SET K-1
+ K.3 8051 INSTRUCTION SET K-2
+ K.3.1 Inherent Instructions K-2
+ K.3.2 Move Instructions K-3
+ K.3.3 Single Operand Instructions K-3
+ K.3.4 Two Operand Instructions K-4
+ K.3.5 Call and Return Instructions K-4
+ K.3.6 Jump Instructions K-4
+ K.3.7 Predefined Symbols: SFR Map K-5
+ K.3.8 Predefined Symbols: SFR Bit Addresses K-6
+ K.3.9 Predefined Symbols: Control Bits K-7
\f
Page v
-
-
-
- APPENDIX L AS8085 ASSEMBLER L-1
- L.1 8085 REGISTER SET L-1
- L.2 8085 INSTRUCTION SET L-1
- L.2.1 Inherent Instructions L-2
- L.2.2 Register/Memory/Immediate Instructions L-2
- L.2.3 Call and Return Instructions L-2
- L.2.4 Jump Instructions L-2
- L.2.5 Input/Output/Reset Instructions L-3
- L.2.6 Move Instructions L-3
- L.2.7 Other Instructions L-3
-
- APPENDIX M ASZ80 ASSEMBLER M-1
- M.1 .hd64 DIRECTIVE M-1
- M.2 Z80 REGISTER SET AND CONDITIONS M-1
- M.3 Z80 INSTRUCTION SET M-2
- M.3.1 Inherent Instructions M-3
- M.3.2 Implicit Operand Instructions M-3
- M.3.3 Load Instruction M-4
- M.3.4 Call/Return Instructions M-4
- M.3.5 Jump and Jump to Subroutine Instructions M-4
- M.3.6 Bit Manipulation Instructions M-5
- M.3.7 Interrupt Mode and Reset Instructions M-5
- M.3.8 Input and Output Instructions M-5
- M.3.9 Register Pair Instructions M-5
- M.3.10 HD64180 Specific Instructions M-6
-
- APPENDIX N AS6500 ASSEMBLER N-1
- N.1 ACKNOWLEDGMENT N-1
- N.2 6500 REGISTER SET N-2
- N.3 6500 INSTRUCTION SET N-2
- N.3.1 Processor Specific Directives N-3
- N.3.2 65xx Core Inherent Instructions N-3
- N.3.3 65xx Core Branch Instructions N-3
- N.3.4 65xx Core Single Operand Instructions N-3
- N.3.5 65xx Core Double Operand Instructions N-4
+
+
+
+ APPENDIX L AS8085 ASSEMBLER L-1
+ L.1 8085 REGISTER SET L-1
+ L.2 8085 INSTRUCTION SET L-1
+ L.2.1 Inherent Instructions L-2
+ L.2.2 Register/Memory/Immediate Instructions L-2
+ L.2.3 Call and Return Instructions L-2
+ L.2.4 Jump Instructions L-2
+ L.2.5 Input/Output/Reset Instructions L-3
+ L.2.6 Move Instructions L-3
+ L.2.7 Other Instructions L-3
+
+ APPENDIX M ASZ80 ASSEMBLER M-1
+ M.1 .hd64 DIRECTIVE M-1
+ M.2 Z80 REGISTER SET AND CONDITIONS M-1
+ M.3 Z80 INSTRUCTION SET M-2
+ M.3.1 Inherent Instructions M-3
+ M.3.2 Implicit Operand Instructions M-3
+ M.3.3 Load Instruction M-4
+ M.3.4 Call/Return Instructions M-4
+ M.3.5 Jump and Jump to Subroutine Instructions M-4
+ M.3.6 Bit Manipulation Instructions M-5
+ M.3.7 Interrupt Mode and Reset Instructions M-5
+ M.3.8 Input and Output Instructions M-5
+ M.3.9 Register Pair Instructions M-5
+ M.3.10 HD64180 Specific Instructions M-6
+
+ APPENDIX N AS6500 ASSEMBLER N-1
+ N.1 ACKNOWLEDGMENT N-1
+ N.2 6500 REGISTER SET N-2
+ N.3 6500 INSTRUCTION SET N-2
+ N.3.1 Processor Specific Directives N-3
+ N.3.2 65xx Core Inherent Instructions N-3
+ N.3.3 65xx Core Branch Instructions N-3
+ N.3.4 65xx Core Single Operand Instructions N-3
+ N.3.5 65xx Core Double Operand Instructions N-4
N.3.6 65xx Core Jump and Jump to Subroutine
- Instructions N-4
+ Instructions N-4
N.3.7 65xx Core Miscellaneous X and Y Register
- Instructions N-4
- N.3.8 65F11 and 65F12 Specific Instructions N-5
- N.3.9 65C00/21 and 65C29 Specific Instructions N-5
+ Instructions N-4
+ N.3.8 65F11 and 65F12 Specific Instructions N-5
+ N.3.9 65C00/21 and 65C29 Specific Instructions N-5
N.3.10 65C02, 65C102, and 65C112 Specific
- Instructions N-6
+ Instructions N-6
\f
- 1.1 THE ASXXXX ASSEMBLERS
+ 1.1 THE ASXXXX ASSEMBLERS
The ASxxxx assemblers are a series of microprocessor assem-
blers written in the C programming language. Each assembler has
- a device specific section which includes:
+ a device specific section which includes:
1. device description, byte order, and file extension in-
- formation
+ formation
2. a table of the assembler general directives, special
device directives, assembler mnemonics and associated
- operation codes
+ operation codes
3. machine specific code for processing the device mnemon-
- ics, addressing modes, and special directives
+ ics, addressing modes, and special directives
- The device specific information is detailed in the appendices.
+ The device specific information is detailed in the appendices.
The assemblers have a common device independent section which
handles the details of file input/output, symbol table genera-
tion, program/data areas, expression analysis, and assembler
- directive processing.
+ directive processing.
- The assemblers provide the following features:
+ The assemblers provide the following features:
- 1. Command string control of assembly functions
+ 1. Command string control of assembly functions
- 2. Alphabetized, formatted symbol table listing
+ 2. Alphabetized, formatted symbol table listing
- 3. Relocatable object modules
+ 3. Relocatable object modules
- 4. Global symbols for linking object modules
+ 4. Global symbols for linking object modules
- 5. Conditional assembly directives
+ 5. Conditional assembly directives
\f
THE ASXXXX ASSEMBLERS
- 6. Program sectioning directives
+ 6. Program sectioning directives
ASxxxx assembles one or more source files into a single relo-
catable ascii object file. The output of the ASxxxx assemblers
consists of an ascii relocatable object file(*.rel), an assembly
- listing file(*.lst), and a symbol file(*.sym).
+ listing file(*.lst), and a symbol file(*.sym).
- 1.1.1 Assembly Pass 1
+ 1.1.1 Assembly Pass 1
During pass 1, ASxxxx opens all source files and performs a
rudimenatry assembly of each source statement. During this pro-
cess all symbol tables are built, program sections defined, and
- number of bytes for each assembled source line is estimated.
+ number of bytes for each assembled source line is estimated.
At the end of pass 1 all undefined symbols may be made global
(external) using the ASxxxx switch -g, otherwise undefined sym-
- bols will be flagged as errors during succeeding passes.
+ bols will be flagged as errors during succeeding passes.
- 1.1.2 Assembly Pass 2
+ 1.1.2 Assembly Pass 2
During pass 2 the ASxxxx assembler resolves forward refer-
struction may depend upon the addressing mode, whether the in-
struction allows multiple forms based upon the relative distance
to the addressed location, or other factors. Pass 2 resolves
- these cases and determines the address of all symbols.
+ these cases and determines the address of all symbols.
- 1.1.3 Assembly Pass 3
+ 1.1.3 Assembly Pass 3
Pass 3 by the assembler generates the listing file, the relo-
catable output file, and the symbol tables. Also during pass 3
- the errors will be reported.
+ the errors will be reported.
The relocatable object file is an ascii file containing sym-
bol references and definitions, program area definitions, and
the relocatable assembled code, the linker ASLINK will use this
information to generate an absolute load file (Motorola or Intel
- formats).
+ formats).
\f
SOURCE PROGRAM FORMAT
- 1.2 SOURCE PROGRAM FORMAT
+ 1.2 SOURCE PROGRAM FORMAT
- 1.2.1 Statement Format
+ 1.2.1 Statement Format
A source program is composed of assembly-language statements.
Each statement must be completed on one line. A line may con-
tain a maximum of 128 characters, longer lines are truncated and
- lost.
+ lost.
An ASxxxx assembler statement may have as many as four
fields. These fields are identified by their order within the
statement and/or by separating characters between fields. The
- general format of the ASxxxx statement is:
+ general format of the ASxxxx statement is:
- [label:] Operator Operand [;Comment(s)]
+ [label:] Operator Operand [;Comment(s)]
The label and comment fields are optional. The operator and
operand fields are interdependent. The operator field may be an
assembler directive or an assembly mnemonic. The operand field
may be optional or required as defined in the context of the
- operator.
+ operator.
ASxxxx interprets and processes source statements one at a
time. Each statement causes a particular operation to be per-
- formed.
+ formed.
- 1.2.1.1 Label Field -
+ 1.2.1.1 Label Field -
A label is a user-defined symbol which is assigned the value
of the current location counter and entered into the user de-
ASxxxx to assign memory addresses to the source program state-
ments as they are encountered during the assembly process. Thus
a label is a means of symbolically referring to a specific
- statement.
+ statement.
When a program section is absolute, the value of the current
location counter is absolute; its value references an absolute
parent value of the current location counter to establish its
effective absolute address at execution time. (The user can
also force the linker to relocate sections defined as absolute.
- This may be required under special circumstances.)
+ This may be required under special circumstances.)
If present, a label must be the first field in a source
statement and must be terminated by a colon (:). For example,
if the value of the current location counter is absolute
- 01F0(H), the statement:
+ 01F0(H), the statement:
- abcd: nop
+ abcd: nop
assigns the value 01F0(H) to the label abcd. If the location
counter value were relocatable, the final value of abcd would be
01F0(H)+K, where K represents the relocation bias of the program
- section, as calculated by the linker at link time.
+ section, as calculated by the linker at link time.
More than one label may appear within a single label field.
Each label so specified is assigned the same address value. For
example, if the value of the current location counter is
1FF0(H), the multiple labels in the following statement are each
- assigned the value 1FF0(H):
+ assigned the value 1FF0(H):
- abcd: aq: $abc: nop
+ abcd: aq: $abc: nop
Multiple labels may also appear on successive lines. For ex-
- ample, the statements
+ ample, the statements
- abcd:
- aq:
- $abc: nop
+ abcd:
+ aq:
+ $abc: nop
likewise cause the same value to be assigned to all three la-
- bels.
+ bels.
A double colon (::) defines the label as a global symbol.
- For example, the statement
+ For example, the statement
- abcd:: nop
+ abcd:: nop
establishes the label abcd as a global symbol. The distinguish-
ing attribute of a global symbol is that it can be referenced
from within an object module other than the module in which the
symbol is defined. References to this label in other modules
are resolved when the modules are linked as a composite execut-
- able image.
+ able image.
- The legal characters for defining labels are:
+ The legal characters for defining labels are:
- A through Z
- a through z
- 0 through 9
- . (Period)
- $ (Dollar sign)
- _ (underscore)
+ A through Z
+ a through z
+ 0 through 9
+ . (Period)
+ $ (Dollar sign)
+ _ (underscore)
A label may be any length, however only the first 79
characters are significant and, therefore must be unique among
two or more labels are the same. The m code is caused by the
redeclaration of the symbol or its reference by another state-
ment. The p code is generated because the symbols location is
- changing on each pass through the source file.
+ changing on each pass through the source file.
The label must not start with the characters 0-9, as this
designates a local symbol with special attributes described in a
- later section.
+ later section.
The label must not start with the sequence $$, as this
- represents the temporary radix 16 for constants.
+ represents the temporary radix 16 for constants.
- 1.2.1.2 Operator Field -
+ 1.2.1.2 Operator Field -
The operator field specifies the action to be performed. It
may consist of an instruction mnemonic (op code) or an assembler
- directive.
+ directive.
When the operator is an instruction mnemonic, a machine in-
struction is generated and the assembler evaluates the addresses
of the operands which follow. When the operator is a directive
ASxxxx performs certain control actions or processing operations
- during assembly of the source program.
+ during assembly of the source program.
Leading and trailing spaces or tabs in the operator field
have no significance; such characters serve only to separate
- the operator field from the preceeding and following fields.
+ the operator field from the preceeding and following fields.
- An operator is terminated by a space, tab or end of line.
+ An operator is terminated by a space, tab or end of line.
- 1.2.1.3 Operand Field -
+ 1.2.1.3 Operand Field -
When the operator is an instruction mnemonic (op code), the
operand field contains program variables that are to be
- evaluated/manipulated by the operator.
+ evaluated/manipulated by the operator.
Operands may be expressions or symbols, depending on the
operator. Multiple expressions used in the operand fields may
be separated by a comma. An operand should be preceeded by an
operator field; if it is not, the statement will give an error
(q or o). All operands following instruction mnemonics are
- treated as expressions.
+ treated as expressions.
The operand field is terminated by a semicolon when the field
is followed by a comment. For example, in the following
- statement:
+ statement:
- label: lda abcd,x ;Comment field
+ label: lda abcd,x ;Comment field
\f
THE ASSEMBLER PAGE 1-6
the operands abcd and x; and a semicolon terminates the operand
field and defines the beginning of the comment field. When no
comment field follows, the operand field is terminated by the
- end of the source line.
+ end of the source line.
- 1.2.1.4 Comment Field -
+ 1.2.1.4 Comment Field -
The comment field begins with a semicolon and extends through
the end of the line. This field is optional and may contain any
- 7-bit ascii character except null.
+ 7-bit ascii character except null.
Comments do not affect assembly processing or program execu-
- tion.
+ tion.
- 1.3 SYMBOLS AND EXPRESSIONS
+ 1.3 SYMBOLS AND EXPRESSIONS
This section describes the generic components of the ASxxxx
assemblers: the character set, the conventions observed in con-
structing symbols, and the use of numbers, operators, and ex-
- pressions.
+ pressions.
- 1.3.1 Character Set
+ 1.3.1 Character Set
- The following characters are legal in ASxxxx source programs:
+ The following characters are legal in ASxxxx source programs:
1. The letters A through Z. Both upper- and lower-case
letters are acceptable. The assemblers, by default,
are not case sensitive, i.e. ABCD and abcd are the
same symbols. (The assemblers can be made case sensi-
- tive by using the -z command line option.)
+ tive by using the -z command line option.)
- 2. The digits 0 through 9
+ 2. The digits 0 through 9
3. The characters . (period), $ (dollar sign), and _ (un-
- derscore).
+ derscore).
- 4. The special characters listed in Tables 1 through 6.
+ 4. The special characters listed in Tables 1 through 6.
Tables 1 through 6 describe the various ASxxxx label and
field terminators, assignment operators, operand separators, as-
- sembly, unary, binary, and radix operators.
+ sembly, unary, binary, and radix operators.
\f
THE ASSEMBLER PAGE 1-7
SYMBOLS AND EXPRESSIONS
- Table 1 Label Terminators and Assignment Operators
- ----------------------------------------------------------------
+ Table 1 Label Terminators and Assignment Operators
+ ----------------------------------------------------------------
- : Colon Label terminator.
+ : Colon Label terminator.
:: Double colon Label Terminator; defines the
- label as a global label.
+ label as a global label.
- = Equal sign Direct assignment operator.
+ = Equal sign Direct assignment operator.
- == Double equal Direct assignment operator;
+ == Double equal Direct assignment operator;
sign defines the symbol as a global
- symbol.
+ symbol.
- ----------------------------------------------------------------
+ ----------------------------------------------------------------
- Table 2 Field Terminators and Operand Separators
- ----------------------------------------------------------------
+ Table 2 Field Terminators and Operand Separators
+ ----------------------------------------------------------------
- Tab Item or field terminator.
+ Tab Item or field terminator.
- Space Item or field terminator.
+ Space Item or field terminator.
- , Comma Operand field separator.
+ , Comma Operand field separator.
- ; Semicolon Comment field indicator.
+ ; Semicolon Comment field indicator.
- ----------------------------------------------------------------
+ ----------------------------------------------------------------
- Table 3 Assembler Operators
- ----------------------------------------------------------------
+ Table 3 Assembler Operators
+ ----------------------------------------------------------------
- # Number sign Immediate expression indicator.
+ # Number sign Immediate expression indicator.
- . Period Current location counter.
+ . Period Current location counter.
- ( Left parenthesis Expression delimiter.
+ ( Left parenthesis Expression delimiter.
- ) Right parenthesis Expression delimeter.
+ ) Right parenthesis Expression delimeter.
- ----------------------------------------------------------------
+ ----------------------------------------------------------------
\f
THE ASSEMBLER PAGE 1-8
- Table 4 Unary Operators
- ----------------------------------------------------------------
+ Table 4 Unary Operators
+ ----------------------------------------------------------------
< Left bracket <FEDC Produces the lower byte
value of the expression.
- (DC)
+ (DC)
> Right bracket >FEDC Produces the upper byte
value of the expression.
- (FE)
+ (FE)
- + Plus sign +A Positive value of A
+ + Plus sign +A Positive value of A
- Minus sign -A Produces the negative
- (2's complement) of A.
+ (2's complement) of A.
~ Tilde ~A Produces the 1's comple-
- ment of A.
+ ment of A.
' Single quote 'D Produces the value of
- the character D.
+ the character D.
" Double quote "AB Produces the double byte
- value for AB.
+ value for AB.
- \ Backslash '\n Unix style characters
- \b, \f, \n, \r, \t
- or '\001 or octal byte values.
+ \ Backslash '\n Unix style characters
+ \b, \f, \n, \r, \t
+ or '\001 or octal byte values.
- ----------------------------------------------------------------
+ ----------------------------------------------------------------
SYMBOLS AND EXPRESSIONS
- Table 5 Binary Operators
- ----------------------------------------------------------------
+ Table 5 Binary Operators
+ ----------------------------------------------------------------
- << Double 0800 << 4 Produces the 4 bit
+ << Double 0800 << 4 Produces the 4 bit
Left bracket left-shifted value of
- 0800. (8000)
+ 0800. (8000)
- >> Double 0800 >> 4 Produces the 4 bit
+ >> Double 0800 >> 4 Produces the 4 bit
Right bracket right-shifted value of
- 0800. (0080)
+ 0800. (0080)
+ Plus sign A + B Arithmetic Addition
- operator.
+ operator.
- Minus sign A - B Arithmetic Subtraction
- operator.
+ operator.
* Asterisk A * B Arithmetic Multiplica-
tion operator. (signed
- 16-bit)
+ 16-bit)
/ Slash A / B Arithmetic Division
operator. (signed
- 16-bit quotient)
+ 16-bit quotient)
- & Ampersand A & B Logical AND operator.
+ & Ampersand A & B Logical AND operator.
- | Bar A | B Logical OR operator.
+ | Bar A | B Logical OR operator.
- % Percent sign A % B Modulus operator.
- (16-bit value)
+ % Percent sign A % B Modulus operator.
+ (16-bit value)
- ^ Up arrow or A ^ B EXCLUSIVE OR operator.
- circumflex
+ ^ Up arrow or A ^ B EXCLUSIVE OR operator.
+ circumflex
- ----------------------------------------------------------------
+ ----------------------------------------------------------------
SYMBOLS AND EXPRESSIONS
- Table 6 Temporary Radix Operators
- ----------------------------------------------------------------
+ Table 6 Temporary Radix Operators
+ ----------------------------------------------------------------
- $%, 0b, 0B Binary radix operator.
+ $%, 0b, 0B Binary radix operator.
- $&, 0o, 0O, 0q, 0Q Octal radix operator.
+ $&, 0o, 0O, 0q, 0Q Octal radix operator.
- $#, 0d, 0D Decimal radix operator.
+ $#, 0d, 0D Decimal radix operator.
- $$, 0h, 0H, 0x, 0X Hexidecimal radix operator.
+ $$, 0h, 0H, 0x, 0X Hexidecimal radix operator.
Potential ambiguities arising from the use of 0b and 0d
ceding all non-prefixed hexidecimal numbers with 00.
Leading 0's are required in any case where the first
hexidecimal digit is abcdef as the assembler will treat
- the letter sequence as a label.
+ the letter sequence as a label.
- ----------------------------------------------------------------
+ ----------------------------------------------------------------
- 1.3.2 User-Defined Symbols
+ 1.3.2 User-Defined Symbols
User-defined symbols are those symbols that are equated to a
specific value through a direct assignment statement or appear
as labels. These symbols are added to the User Symbol Table as
- they are encountered during assembly.
+ they are encountered during assembly.
- The following rules govern the creation of user-defined symbols:
+ The following rules govern the creation of user-defined symbols:
1. Symbols can be composed of alphanumeric characters,
dollar signs ($), periods (.), and underscores (_)
- only.
+ only.
2. The first character of a symbol must not be a number
- (except in the case of local symbols).
+ (except in the case of local symbols).
3. The first 79 characters of a symbol must be unique. A
symbol can be written with more than 79 legal
characters, but the 80th and subsequent characters are
- ignored.
+ ignored.
- 4. Spaces and Tabs must not be embedded within a symbol.
+ 4. Spaces and Tabs must not be embedded within a symbol.
\f
SYMBOLS AND EXPRESSIONS
- 1.3.3 Local Symbols
+ 1.3.3 Local Symbols
Local symbols are specially formatted symbols used as labels
within a block of coding that has been delimited as a local sym-
bol block. Local symbols are of the form n$, where n is a
decimal integer from 0 to 255, inclusive. Examples of local
- symbols are:
+ symbols are:
- 1$
- 27$
- 138$
- 244$
+ 1$
+ 27$
+ 138$
+ 244$
The range of a local symbol block consists of those state-
ments between two normally constructed symbolic labels. Note
- that a statement of the form:
+ that a statement of the form:
- ALPHA = EXPRESSION
+ ALPHA = EXPRESSION
is a direct assignment statement but does not create a label and
- thus does not delimit the range of a local symbol block.
+ thus does not delimit the range of a local symbol block.
Note that the range of a local symbol block may extend across
- program areas.
+ program areas.
Local symbols provide a convenient means of generating labels
for branch instructions and other such references within local
be referenced from outside their respective local symbol blocks.
Thus, local symbols of the same name can appear in other local
symbol blocks without conflict. Local symbols require less sym-
- bol table space than normal symbols. Their use is recommended.
+ bol table space than normal symbols. Their use is recommended.
The use of the same local symbol within a local symbol block
- will generate one or both of the m or p errors.
+ will generate one or both of the m or p errors.
\f
THE ASSEMBLER PAGE 1-12
SYMBOLS AND EXPRESSIONS
- Example of local symbols:
+ Example of local symbols:
a: ldx #atable ;get table address
lda #0d48 ;table length
1$: clr ,x+ ;clear
deca
bne 1$
-
+
b: ldx #btable ;get table address
lda #0d48 ;table length
1$: clr ,x+ ;clear
bne 1$
- 1.3.4 Current Location Counter
+ 1.3.4 Current Location Counter
The period (.) is the symbol for the current location coun-
ter. When used in the operand field of an instruction, the
period represents the address of the first byte of the
- instruction:
+ instruction:
AS: ldx #. ;The period (.) refers to
;the address of the ldx
;instruction.
When used in the operand field of an ASxxxx directive, it
- represents the address of the current byte or word:
+ represents the address of the current byte or word:
QK = 0
-
+
.word 0xFFFE,.+4,QK ;The operand .+4 in the .word
;directive represents a value
;stored in the second of the
second value represented by .+4 will be stored at location
0H0202, its value will be 0H0206 ( = 0H0202 + 4). The third
value defined by the symbol QK will be placed at location
- 0H0204.
+ 0H0204.
At the beginning of each assembly pass, ASxxxx resets the lo-
cation counter. Normally, consecutive memory locations are as-
signed to each byte of object code generated. However, the
value of the location counter can be changed through a direct
- assignment statement of the following form:
+ assignment statement of the following form:
\f
SYMBOLS AND EXPRESSIONS
- . = . + expression
+ . = . + expression
The new location counter can only be specified relative to
program counter along with the expression on the right side of
the assignment operator will generate the (.) error. (Absolute
program areas may use the .org directive to specify the absolute
- location of the current program counter.)
+ location of the current program counter.)
The following coding illustrates the use of the current location
- counter:
+ counter:
.area CODE1 (ABS) ;program area CODE1
;is ABSOLUTE
-
+
.org 0H100 ;set location to
;0H100 absolute
-
+
num1: ldx #.+0H10 ;The label num1 has
;the value 0H100.
;X is loaded with
;0H100 + 0H10
-
+
.org 0H130 ;location counter
;set to 0H130
-
+
num2: ldy #. ;The label num2 has
;the value 0H130.
;Y is loaded with
;value 0H130.
-
-
+
+
.area CODE2 (REL) ;program area CODE2
;is RELOCATABLE
-
+
. = . + 0H20 ;Set location counter
;to relocatable 0H20 of
;the program section.
-
+
num3: .word 0 ;The label num3 has
;the value
;of relocatable 0H20.
-
+
. = . + 0H40 ;will reserve 0H40
;bytes of storage as will
.blkb 0H40 ;or
.blkw 0H20
The .blkb and .blkw directives are the preferred methods of
- allocating space.
+ allocating space.
\f
SYMBOLS AND EXPRESSIONS
- 1.3.5 Numbers
+ 1.3.5 Numbers
ASxxxx assumes that all numbers in the source program are to
.radix directive may be used to specify the default as octal,
decimal, or hexidecimal. Individual numbers can be designated
as binary, octal, decimal, or hexidecimal through the temporary
- radix prefixes shown in table 6.
+ radix prefixes shown in table 6.
Negative numbers must be preceeded by a minus sign; ASxxxx
translates such numbers into two's complement form. Positive
- numbers may (but need not) be preceeded by a plus sign.
+ numbers may (but need not) be preceeded by a plus sign.
Numbers are always considered to be absolute values, therefor
- they are never relocatable.
+ they are never relocatable.
- 1.3.6 Terms
+ 1.3.6 Terms
A term is a component of an expression and may be one of the
- following:
+ following:
- 1. A number.
+ 1. A number.
- 2. A symbol:
+ 2. A symbol:
1. A period (.) specified in an expression causes the
- current location counter to be used.
- 2. A User-defined symbol.
+ current location counter to be used.
+ 2. A User-defined symbol.
3. An undefined symbol is assigned a value of zero and
inserted in the User-Defined symbol table as an un-
- defined symbol.
+ defined symbol.
3. A single quote followed by a single ascii character, or
- a double quote followed by two ascii characters.
+ a double quote followed by two ascii characters.
4. An expression enclosed in parenthesis. Any expression
so enclosed is evaluated and reduced to a single term
pears is evaluated. Parenthesis, for example, may be
used to alter the left-to-right evaluation of expres-
sions, (as in A*B+C versus A*(B+C)), or to apply a un-
- ary operator to an entire expression (as in -(A+B)).
+ ary operator to an entire expression (as in -(A+B)).
- 5. A unary operator followed by a symbol or number.
+ 5. A unary operator followed by a symbol or number.
SYMBOLS AND EXPRESSIONS
- 1.3.7 Expressions
+ 1.3.7 Expressions
Expressions are combinations of terms joined together by
evaluation of an expression includes the determination of its
attributes. A resultant expression value may be one of three
types (as described later in this section): relocatable, ab-
- solute, and external.
+ solute, and external.
- Expressions are evaluate with an operand hierarchy as follows:
+ Expressions are evaluate with an operand hierarchy as follows:
* / % multiplication,
division, and
modulus first.
-
+
+ - addition and
subtraction second.
-
+
<< >> left shift and
right shift third.
-
+
^ exclusive or fourth.
-
+
& logical and fifth.
-
+
| logical or last
-
+
except that unary operators take precedence over binary
operators.
A missing or illegal operator terminates the expression
analysis, causing error codes (o) and/or (q) to be generated
- depending upon the context of the expression itself.
+ depending upon the context of the expression itself.
At assembly time the value of an external (global) expression
is equal to the value of the absolute part of that expression.
For example, the expression external+4, where 'external' is an
external symbol, has the value of 4. This expression, however,
when evaluated at link time takes on the resolved value of the
- symbol 'external', plus 4.
+ symbol 'external', plus 4.
Expressions, when evaluated by ASxxxx, are one of three
types: relocatable, absolute, or external. The following dis-
- tinctions are important:
+ tinctions are important:
1. An expression is relocatable if its value is fixed re-
lative to the base address of the program area in which
similarly, a period (.) in a relocatable program area,
representing the value of the current program location
- counter, will also have a relocatable value.
+ counter, will also have a relocatable value.
2. An expression is absolute if its value is fixed. An
expression whose terms are numbers and ascii characters
area, is an absolute expression. This is because every
term in a program area has the same relocation bias.
When one term is subtracted from the other the reloca-
- tion bias is zero.
+ tion bias is zero.
3. An expression is external (or global) if it contains a
single global reference (plus or minus an absolute ex-
pression value) that is not defined within the current
program. Thus, an external expression is only par-
tially defined following assembly and must be resolved
- at link time.
+ at link time.
- 1.4 GENERAL ASSEMBLER DIRECTIVES
+ 1.4 GENERAL ASSEMBLER DIRECTIVES
An ASxxxx directive is placed in the operator field of the
source line. Only one directive is allowed per source line.
Each directive may have a blank operand field or one or more
- operands. Legal operands differ with each directive.
+ operands. Legal operands differ with each directive.
- 1.4.1 .module Directive
+ 1.4.1 .module Directive
- Format:
+ Format:
- .module string
+ .module string
The .module directive causes the string to be included in the
assemblers output file as an identifier for this particular ob-
The main use of this directive is to allow the linker to report
a modules' use of undefined symbols. At link time all undefined
symbols are reported and the modules referencing them are
- listed.
+ listed.
\f
GENERAL ASSEMBLER DIRECTIVES
- 1.4.2 .title Directive
+ 1.4.2 .title Directive
- Format:
+ Format:
- .title string
+ .title string
The .title directive provides a character string to be placed
- on the second line of each page during listing.
+ on the second line of each page during listing.
- 1.4.3 .sbttl Directive
+ 1.4.3 .sbttl Directive
- Format:
+ Format:
- .sbttl string
+ .sbttl string
The .sbttl directive provides a character string to be placed
- on the third line of each page during listing.
+ on the third line of each page during listing.
- 1.4.4 .page Directive
+ 1.4.4 .page Directive
- Format:
+ Format:
- .page
+ .page
The .page directive causes a page ejection with a new heading
to be printed. The new page occurs after the next line of the
source program is processed, this allows an immediately follow-
ing .sbttl directive to appear on the new page. The .page
source line will not appear in the file listing. Paging may be
- disabled by invoking the -p directive.
+ disabled by invoking the -p directive.
- 1.4.5 .byte and .db Directives
+ 1.4.5 .byte and .db Directives
- Format:
+ Format:
.byte exp ;Stores the binary value
.db exp ;of the expression in the
;next byte.
-
+
.byte exp1,exp2,expn ;Stores the binary values
.db exp1,exp2,expn ;of the list of expressions
;in successive bytes.
-
+
where: exp, represent expressions that will be
exp1, truncated to 8-bits of data.
. Each expression will be calculated
expn separated by commas.
The .byte or .db directives are used to generate successive
- bytes of binary data in the object module.
+ bytes of binary data in the object module.
- 1.4.6 .word and .dw Directives
+ 1.4.6 .word and .dw Directives
- Format:
+ Format:
.word exp ;Stores the binary value
.dw exp ;of the expression in
;the next word.
-
+
.word exp1,exp2,expn ;Stores the binary values
.dw exp1,exp2,expn ;of the list of expressions
;in successive words.
-
+
where: exp, represent expressions that will occupy two
exp1, bytes of data. Each expression will be
. calculated as a 16-bit word expression.
expn separated by commas.
The .word or .dw directives are used to generate successive
- words of binary data in the object module.
+ words of binary data in the object module.
- 1.4.7 .blkb, .blkw, and .ds Directives
+ 1.4.7 .blkb, .blkw, and .ds Directives
- Format:
+ Format:
.blkb N ;reserve N bytes of space
.blkw N ;reserve N words of space
.ds N ;reserve N bytes of space
The .blkb and .ds directives reserve byte blocks in the ob-
- ject module; the .blkw directive reserves word blocks.
+ ject module; the .blkw directive reserves word blocks.
- 1.4.8 .ascii Directive
+ 1.4.8 .ascii Directive
- Format:
+ Format:
- .ascii /string/
+ .ascii /string/
- where: string is a string of printable ascii characters.
+ where: string is a string of printable ascii characters.
/ / represent the delimiting characters. These
delimiters may be any paired printing
delimiting characters do not match, the .ascii
- directive will give the (q) error.
+ directive will give the (q) error.
The .ascii directive places one binary byte of data for each
- character in the string into the object module.
+ character in the string into the object module.
- 1.4.9 .ascis Directive
+ 1.4.9 .ascis Directive
- Format:
+ Format:
- .ascis /string/
+ .ascis /string/
- where: string is a string of printable ascii characters.
+ where: string is a string of printable ascii characters.
/ / represent the delimiting characters. These
delimiters may be any paired printing
characters, as long as the characters are not
contained within the string itself. If the
delimiting characters do not match, the .ascis
- directive will give the (q) error.
+ directive will give the (q) error.
The .ascis directive places one binary byte of data for each
character in the string into the object module. The last
- character in the string will have the high order bit set.
+ character in the string will have the high order bit set.
- 1.4.10 .asciz Directive
+ 1.4.10 .asciz Directive
- Format:
+ Format:
- .asciz /string/
+ .asciz /string/
- where: string is a string of printable ascii characters.
+ where: string is a string of printable ascii characters.
/ / represent the delimiting characters. These
delimiters may be any paired printing
characters, as long as the characters are not
contained within the string itself. If the
delimiting characters do not match, the .asciz
- directive will give the (q) error.
+ directive will give the (q) error.
The .asciz directive places one binary byte of data for each
character in the string into the object module. Following all
the character data a zero byte is inserted to terminate the
- character string.
+ character string.
\f
GENERAL ASSEMBLER DIRECTIVES
- 1.4.11 .radix Directive
+ 1.4.11 .radix Directive
- Format:
+ Format:
- .radix character
+ .radix character
where: character represents a single character specifying the
default radix to be used for succeeding numbers.
- The character may be any one of the following:
+ The character may be any one of the following:
B,b Binary
-
+
O,o Octal
Q,q
-
+
D,d Decimal
'blank'
-
+
H,h Hexidecimal
X,x
- 1.4.12 .even Directive
+ 1.4.12 .even Directive
- Format:
+ Format:
- .even
+ .even
The .even directive ensures that the current location counter
contains an even boundary value by adding 1 if the current loca-
- tion is odd.
+ tion is odd.
- 1.4.13 .odd Directive
+ 1.4.13 .odd Directive
- Format:
+ Format:
- .odd
+ .odd
The .odd directive ensures that the current location counter
contains an odd boundary value by adding one if the current lo-
- cation is even.
+ cation is even.
\f
GENERAL ASSEMBLER DIRECTIVES
- 1.4.14 .area Directive
+ 1.4.14 .area Directive
- Format:
+ Format:
- .area name [(options)]
+ .area name [(options)]
where: name represents the symbolic name of the program sec-
tion. This name may be the same as any
user-defined symbol as the area names are in-
- dependent of all symbols and labels.
+ dependent of all symbols and labels.
- options specify the type of program or data area:
- ABS absolute (automatically invokes OVR)
- REL relocatable
- OVR overlay
- CON concatenate
- PAG paged area
+ options specify the type of program or data area:
+ ABS absolute
+ REL relocatable
+ OVR overlay
+ CON concatenate
+ PAG paged area
The .area directive provides a means of defining and separat-
ing multiple programming and data sections. The name is the
area label used by the assembler and the linker to collect code
from various separately assembled modules into one section. The
- name may be from 1 to 79 characters in length.
+ name may be from 1 to 79 characters in length.
The options are specified within parenthesis and separated by
- commas as shown in the following example:
+ commas as shown in the following example:
.area TEST (REL,CON) ;This section is relocatable
;and concatenated with other
;sections of this program area.
-
+
.area DATA (REL,OVR) ;This section is relocatable
;and overlays other sections
;of this program area.
-
- .area SYS (ABS,OVR) ;(CON not allowed with ABS)
- ;This section is defined as
- ;absolute. Absolute sections
- ;are always overlayed with
- ;other sections of this program
- ;area.
-
+
+ .area SYS (ABS,OVR) ;This section is defined as
+ ;absolute and overlays other
+ ;sections of this program area.
+
.area PAGE (PAG) ;This is a paged section. The
;section must be on a 256 byte
;boundary and its length is
same area name. The ABS option indicates an absolute area. The
OVR and CON options indicate if program sections of the same
name will overlay each other (start at the same location) or be
- concatenated with each other (appended to each other).
+ concatenated with each other (appended to each other).
+
+ Warning: ABS used to automatically invoke OVR and CON was not
+ allowed with ABS. This behaviour has been changed. Absolute
+ sections need an explicit OVR flag to be overlayed with other
+ sections of this program area. Overlapping absolute areas will
+ generate a warning unless OVR is specified.
Multiple invocations of the .area directive with the same
name must specify the same options or leave the options field
blank, this defaults to the previously specified options for
- this program area.
+ this program area.
The ASxxxx assemblers automatically provide two program
- sections:
+ sections:
- '. .ABS.' This dumby section contains all absolute
- symbols and their values.
+ '. .ABS.' This dummy section contains all absolute
+ symbols and their values.
'_CODE' This is the default program/data area.
- This program area is of type (REL,CON).
+ This program area is of type (REL,CON).
The ASxxxx assemblers also automatically generate two symbols
- for each program area:
+ for each program area:
's_<area>' This is the starting address of the pro-
- gram area.
+ gram area.
indent -16 'l_<area>' This is the
- length of the program area.
+ length of the program area.
- The .area names and options are never case sensitive.
+ The .area names and options are never case sensitive.
- 1.4.15 .org Directive
+ 1.4.15 .org Directive
- Format:
+ Format:
- .org exp
+ .org exp
where: exp is an absolute expression that becomes the cur-
- rent location counter.
+ rent location counter.
The .org directive is valid only in an absolute program section
and will give a (q) error if used in a relocatable program area.
The .org directive specifies that the current location counter
- is to become the specified absolute value.
+ is to become the specified absolute value.
\f
GENERAL ASSEMBLER DIRECTIVES
- 1.4.16 .globl Directive
+ 1.4.16 .globl Directive
- Format:
+ Format:
- .globl sym1,sym2,...,symn
+ .globl sym1,sym2,...,symn
where: sym1, represent legal symbolic names. When
sym2,... When multiple symbols are specified,
symn they are separated by commas.
A .globl directive may also have a label field and/or a com-
- ment field.
+ ment field.
The .globl directive is provided to define (and thus provide
linkage to) symbols not otherwise defined as global symbols
within a module. In defining global symbols the directive
- .globl J is similar to:
+ .globl J is similar to:
- J == expression or J::
+ J == expression or J::
Because object modules are linked by global symbols, these
symbols are vital to a program. All internal symbols appearing
within a given program must be defined at the end of pass 1 or
they will be considered undefined. The assembly directive (-g)
can be be invoked to make all undefined symbols global at the
- end of pass 1.
+ end of pass 1.
- 1.4.17 .if, .else, and .endif Directives
+ 1.4.17 .if, .else, and .endif Directives
- Format:
+ Format:
.if expr
. ;}
The conditional assembly directives allow you to include or
exclude blocks of source code during the assembly process, based
- on the evaluation of the condition test.
+ on the evaluation of the condition test.
The range of true condition will be processed if the expres-
sion 'expr' is not zero (i.e. true) and the range of false con-
dition will be processed if the expression 'expr' is zero (i.e
false). The range of true condition is optional as is the .else
directive and the range of false condition. The following are
- all valid .if/.else/.endif constructions:
+ all valid .if/.else/.endif constructions:
\f
THE ASSEMBLER PAGE 1-24
.if A-4 ;evaluate A-4
.byte 1,2 ;insert bytes if A-4 is
.endif ;not zero
-
+
.if K+3 ;evaluate K+3
.else
.byte 3,4 ;insert bytes if K+3
.endif ;is zero
-
+
.if J&3 ;evaluate J masked by 3
.byte 12 ;insert this byte if J&3
.else ;is not zero
.endif ;is zero
- The .if/.else/.endif directives may be nested upto 10 levels.
+ The .if/.else/.endif directives may be nested upto 10 levels.
The .page directive is processed within a false condition
range to allow extended textual information to be incorporated
in the source program with out the need to use the comment
- delimiter (;):
+ delimiter (;):
.if 0
-
+
.page
This text will be bypassed during assembly
but appear in the listing file.
.
.
.
-
+
.endif
- 1.4.18 .include Directive
+ 1.4.18 .include Directive
- Format:
+ Format:
- .include string
+ .include string
where: string represents a delimited string that is the file
- specification of an ASxxxx source file.
+ specification of an ASxxxx source file.
The .include directive is used to insert a source file within
the source file currently being assembled. When this directive
end of the specified source file is reached, an implicit .page
directive is issued and input continues from the previous source
file. The maximum nesting level of source files specified by a
- .include directive is five.
+ .include directive is five.
\f
THE ASSEMBLER PAGE 1-25
The total number of separately specified .include files is
unlimited as each .include file is opened and then closed during
- each pass made by the assembler.
+ each pass made by the assembler.
- 1.4.19 .setdp Directive
+ 1.4.19 .setdp Directive
- Format:
+ Format:
- .setdp [base [,area]]
+ .setdp [base [,area]]
The set direct page directive has a common format in all the
AS68xx assemblers. The .setdp directive is used to inform the
assembler of the current direct page region and the offset ad-
dress within the selected area. The normal invocation methods
- are:
+ are:
.area DIRECT (PAG)
.setdp
-
+
or
-
+
.setdp 0,DIRECT
for all the 68xx microprocessors (the 6804 has only the paged
at address 0 during linking. When the base address and area are
not specified, then zero and the current area are the defaults.
If a .setdp directive is not issued the assembler defaults the
- direct page to the area "_CODE" at offset 0.
+ direct page to the area "_CODE" at offset 0.
The assembler verifies that any local variable used in a
direct variable reference is located in this area. Local vari-
able and constant value direct access addresses are checked to
- be within the address range from 0 to 255.
+ be within the address range from 0 to 255.
External direct references are assumed by the assembler to be
in the correct area and have valid offsets. The linker will
check all direct page relocations to verify that they are within
- the correct area.
+ the correct area.
The 6809 microprocessor allows the selection of the direct
page to be on any 256 byte boundary by loading the appropriate
value into the dp register. Typically one would like to select
- the page boundary at link time, one method follows:
+ the page boundary at link time, one method follows:
\f
THE ASSEMBLER PAGE 1-26
tfr a,dp ; for access to the direct page
At link time specify the base and global equates to locate the
- direct page:
+ direct page:
-b DIRECT = 0x1000
-g DIRECT = 0x1000
Both the area address and offset value must be specified (area
and variable names are independent). The linker will verify
that the relocated direct page accesses are within the direct
- page.
+ page.
The preceeding sequence could be repeated for multiple paged
areas, however an alternate method is to define a non-paged area
- and use the .setdp directive to specify the offset value:
+ and use the .setdp directive to specify the offset value:
.area DIRECT ; define non-paged area
.
are in the specified area and offset address range. It is the
programmers responsibility to load the dp register with the cor-
rect page segment corresponding to the .setdp base address
- specified.
+ specified.
For those cases where a single piece of code must access a
defined data structure within a direct page and there are many
addressing, where the dp register is the index register and the
- direct addressing is the offset.
+ direct addressing is the offset.
- 1.5 INVOKING ASXXXX
+ 1.5 INVOKING ASXXXX
The ASxxxx assemblers are command line oriented. The PC as-
semblers are started with the appropriate option(s) and file(s)
- to assemble following the assembler name:
+ to assemble following the assembler name:
- as6809 [-dqxgalosff] file1 [file2 file3 ... file6]
+ as6809 [-dqxgalosff] file1 [file2 file3 ... file6]
- The options are:
+ The options are:
d decimal listing
q octal listing
x hex listing (default)
-
+
The listing radix affects the
.lst, .rel, and .sym files.
-
+
g undefined symbols made global
a all user symbols made global
-
+
l create list output file1.lst
o create object output file1.rel
s create symbol output file1.sym
-
+
p disable listing pagination
w wide listing format for symbol table
-
+
z enable case sensitivity for symbols
-
+
relocatable reference flagging:
-
+
f by ` in the listing file
ff by mode in the listing file
ascii text files which may be edited, copied, etc. The output
files are the concatenation of all the input files, if files are
to be assembled independently invoke the assembler for each
- file.
+ file.
The .rel file contains a radix directive so that the linker
will use the proper conversion for this file. Linked files may
- have different radices.
+ have different radices.
\f
If the list (l) option is specified without the symbol table
(s) option, the symbol table is placed at the end of the listing
- file.
+ file.
- 1.6 ERRORS
+ 1.6 ERRORS
The ASxxxx assemblers provide limited diagnostic error codes
during the assembly process, these errors will be noted in the
- listing file and printed on the stderr device.
+ listing file and printed on the stderr device.
- The assembler reports the errors on the stderr device as
+ The assembler reports the errors on the stderr device as
?ASxxxx-Error-<*> in line nnn of filename
where * is the error code, nnn is the line number, and filename
- is the source/include file.
+ is the source/include file.
- The errors are:
+ The errors are:
(.) This error is caused by an absolute direct assign-
- ment of the current location counter
- . = expression (incorrect)
- rather than the correct
- . = . + expression
+ ment of the current location counter
+ . = expression (incorrect)
+ rather than the correct
+ . = . + expression
(a) Indicates a machine specific addressing or address-
- ing mode error.
+ ing mode error.
- (b) Indicates a direct page boundary error.
+ (b) Indicates a direct page boundary error.
- (d) Indicates a direct page addressing error.
+ (d) Indicates a direct page addressing error.
(i) Caused by an .include file error or an .if/.endif
- mismatch.
+ mismatch.
(m) Multiple definitions of the same label, multiple
.module directives, or multiple conflicting attri-
- butes in an .area directive.
+ butes in an .area directive.
(o) Directive or mnemonic error or the use of the .org
- directive in a relocatable area.
+ directive in a relocatable area.
(p) Phase error: label location changing between passes
2 and 3. Normally caused by having more than one
- level of forward referencing.
+ level of forward referencing.
(q) Questionable syntax: missing or improper operators,
- terminators, or delimiters.
+ terminators, or delimiters.
(r) Relocation error: logic operation attempted on a
\f
relocatable term, addition of two relocatable terms,
subtraction of two relocatable terms not within the
- same programming area or external symbols.
+ same programming area or external symbols.
- (u) Undefined symbol encountered during assembly.
+ (u) Undefined symbol encountered during assembly.
- 1.7 LISTING FILE
+ 1.7 LISTING FILE
The (-l) option produces an ascii output listing file. Each
- page of output contains a four line header:
+ page of output contains a four line header:
- 1. The ASxxxx program name and page number
+ 1. The ASxxxx program name and page number
- 2. Title from a .title directive (if any)
+ 2. Title from a .title directive (if any)
- 3. Subtitle from a .sbttl directive (if any)
+ 3. Subtitle from a .sbttl directive (if any)
- 4. Blank line
+ 4. Blank line
- Each succeeding line contains five fields:
+ Each succeeding line contains five fields:
- 1. Error field (first three characters of line)
+ 1. Error field (first three characters of line)
- 2. Current location counter
+ 2. Current location counter
- 3. Generated code in byte format
+ 3. Generated code in byte format
- 4. Source text line number
+ 4. Source text line number
- 5. Source text
+ 5. Source text
The error field may contain upto 2 error flags indicating any
- errors encountered while assembling this line of source code.
+ errors encountered while assembling this line of source code.
The current location counter field displays the 16-bit pro-
- gram position. This field will be in the selected radix.
+ gram position. This field will be in the selected radix.
The generated code follows the program location. The listing
radix determines the number of bytes that will be displayed in
the field, decimal and octal allow four bytes within the field.
If more than one field of data is generated from the assembly of
a single line of source code, then the data field is repeated on
- successive lines.
+ successive lines.
\f
The source text line number is printed in decimal and is fol-
- lowed by the source text.
+ lowed by the source text.
Two special cases will disable the listing of a line of
- source text:
+ source text:
- 1. Source line with a .page directive is never listed.
+ 1. Source line with a .page directive is never listed.
2. Source line with a .include file directive is not
- listed unless the .include file cannot be opened.
+ listed unless the .include file cannot be opened.
Two data field options are available to flag those bytes
specified then each byte to be relocated will be preceeded by
the '`' character. If the -ff option is specified then each
byte to be relocated will be preceeded by one of the following
- characters:
+ characters:
- 1. * paged relocation
+ 1. * paged relocation
- 2. u low byte of unsigned word or unsigned byte
+ 2. u low byte of unsigned word or unsigned byte
- 3. v high byte of unsigned word
+ 3. v high byte of unsigned word
- 4. p PCR low byte of word relocation or PCR byte
+ 4. p PCR low byte of word relocation or PCR byte
- 5. q PCR high byte of word relocation
+ 5. q PCR high byte of word relocation
- 6. r low byte relocation or byte relocation
+ 6. r low byte relocation or byte relocation
- 7. s high byte relocation
+ 7. s high byte relocation
- 1.8 SYMBOL TABLE FILE
+ 1.8 SYMBOL TABLE FILE
- The symbol table has two parts:
+ The symbol table has two parts:
1. The alphabetically sorted list of symbols and/or labels
- defined or referenced in the source program.
+ defined or referenced in the source program.
2. A list of the program areas defined during assembly of
- the source program.
+ the source program.
The sorted list of symbols and/or labels contains the follow-
- ing information:
+ ing information:
1. Program area number (none if absolute value or exter-
- nal)
+ nal)
\f
THE ASSEMBLER PAGE 1-31
SYMBOL TABLE FILE
- 2. The symbol or label
+ 2. The symbol or label
- 3. Directly assigned symbol is denoted with an (=) sign
+ 3. Directly assigned symbol is denoted with an (=) sign
4. The value of a symbol, location of a label relative to
the program area base address (=0), or a **** indicat-
- ing the symbol or label is undefined.
+ ing the symbol or label is undefined.
5. The characters: G - global, R - relocatable, and X -
- external.
+ external.
The list of program areas provides the correspondence between
the program area numbers and the defined program areas, the size
- of the program areas, and the area flags (attributes).
+ of the program areas, and the area flags (attributes).
- 1.9 OBJECT FILE
+ 1.9 OBJECT FILE
The object file is an ascii file containing the information
needed by the linker to bind multiple object modules into a com-
plete loadable memory image. The object module contains the
- following designators:
+ following designators:
[XDQ][HL]
X Hexidecimal radix
D Decimal radix
Q Octal radix
-
+
H Most significant byte first
L Least significant byte first
-
- H Header
+
+ H Header
M Module
A Area
S Symbol
Refer to the linker for a detailed description of each of the
designators and the format of the information contained in the
- object file.
+ object file.
\f
- 2.1 ASLINK RELOCATING LINKER
+ 2.1 ASLINK RELOCATING LINKER
- ASLINK is the companion linker for the ASxxxx assemblers.
+ ASLINK is the companion linker for the ASxxxx assemblers.
The program ASLINK is a general relocating linker performing
- the following functions:
+ the following functions:
- 1. Bind multiple object modules into a single memory image
+ 1. Bind multiple object modules into a single memory image
- 2. Resolve inter-module symbol references
+ 2. Resolve inter-module symbol references
3. Combine code belonging to the same area from multiple
- object files into a single contiguous memory region
+ object files into a single contiguous memory region
4. Search and import object module libraries for undefined
- global variables
+ global variables
5. Perform byte and word program counter relative
- (pc or pcr) addressing calculations
+ (pc or pcr) addressing calculations
- 6. Define absolute symbol values at link time
+ 6. Define absolute symbol values at link time
- 7. Define absolute area base address values at link time
+ 7. Define absolute area base address values at link time
- 8. Produce Intel Hex or Motorola S19 output file
+ 8. Produce Intel Hex or Motorola S19 output file
- 9. Produce a map of the linked memory image
+ 9. Produce a map of the linked memory image
10. Produce an updated listing file with the relocated ad-
- dresses and data
+ dresses and data
INVOKING ASLINK
- 2.2 INVOKING ASLINK
+ 2.2 INVOKING ASLINK
The linker may run in the command line mode or command file
- modes. The allowed startup linker commands are:
+ modes. The allowed startup linker commands are:
- -c/-f command line / command file modes
+ -c/-f command line / command file modes
- -p/-n enable/disable echo file.lnk input to stdout
+ -p/-n enable/disable echo file.lnk input to stdout
If command line mode is selected, all linker commands come
from stdin, if the command file mode is selected the commands
- are input from the specified file (extension must be .lnk).
+ are input from the specified file (extension must be .lnk).
Most sytems require the initial options to be entered on the
- command line:
+ command line:
- ASLINK -[cfpn]
+ ASLINK -[cfpn]
Some systems may request the arguments after the linker is
- started at a system specific prompt:
+ started at a system specific prompt:
- ASLINK
- argv: -[cfpn]
+ ASLINK
+ argv: -[cfpn]
- After invoking the linker the valid options are:
+ After invoking the linker the valid options are:
1. -i/-s Intel Hex (file.ihx) or Motorola S19 (file.s19)
- image output file.
+ image output file.
- 2. -z Specifies that symbol names are case sensitive.
+ 2. -z Specifies that symbol names are case sensitive.
3. -m Generate a map file (file.map). This file con-
tains a list of the symbols (by area) with absolute ad-
dresses, sizes of linked areas, and other linking
- information.
+ information.
4. -w Specifies that a wide listing format be used
- for the map file.
+ for the map file.
5. -xdq Specifies the number radix for the map file
- (Hexidecimal, Decimal, or Octal).
+ (Hexidecimal, Decimal, or Octal).
6. -u Generate an updated listing file (file.rst)
derived from the relocated addresses and data from the
- linker
+ linker
7. fileN Files to be linked. Files may be on the same
line as the above options or on a separate line(s) one
file per line or multiple files separated by spaces or
- tabs.
+ tabs.
\f
INVOKING ASLINK
- 8. -b area = expression (one definition per line)
+ 8. -b area = expression (one definition per line)
This specifies an area base address where the expres-
sion may contain constants and/or defined symbols from
- the linked files.
+ the linked files.
- 9. -g symbol = expression (one definition per line)
+ 9. -g symbol = expression (one definition per line)
This specifies the value for the symbol where the ex-
pression may contain constants and/or defined symbols
- from the linked files.
+ from the linked files.
- 10. -k library directory path
+ 10. -k library directory path
(one definition per line) This specifies one possible
path to an object library. More than one path is al-
- lowed.
+ lowed.
- 11. -l library file specification
+ 11. -l library file specification
(one definition per line) This specifies a possible
- library file. More than one file is allowed.
+ library file. More than one file is allowed.
- 12. -e or null line, terminates input to the linker.
+ 12. -e or null line, terminates input to the linker.
- 2.3 LIBRARY PATH(S) AND FILE(S)
+ 2.3 LIBRARY PATH(S) AND FILE(S)
The process of resolving undefined symbols after scanning the
finition. The library object modules are rescanned until no
more symbols can be resolved. The scanning algorithm allows
resolution of back references. No errors are reported for non
- existant library files or object modules.
+ existant library files or object modules.
The library file specification may be formed in one of two
- ways:
+ ways:
1. If the library file contained an absolute path/file
specification then this is the object module's
- path/file.
- (i.e. C:\...)
+ path/file.
+ (i.e. C:\...)
2. If the library file contains a relative path/file
specification then the concatenation of the path and
this file specification becomes the object module's
- path/file.
- (i.e. \...)
+ path/file.
+ (i.e. \...)
As an example, assume there exists a library file termio.lib
- in the syslib directory specifying the following object modules:
+ in the syslib directory specifying the following object modules:
- \6809\io_disk first object module
- d:\special\io_comm second object module
+ \6809\io_disk first object module
+ d:\special\io_comm second object module
- and the following parameters were specified to the linker:
+ and the following parameters were specified to the linker:
- -k c:\iosystem\ the first path
- -k c:\syslib\ the second path
+ -k c:\iosystem\ the first path
+ -k c:\syslib\ the second path
- -l termio the first library file
- -l io the second library file (no such file)
+ -l termio the first library file
+ -l io the second library file (no such file)
The linker will attempt to use the following object modules to
- resolve any undefined symbols:
+ resolve any undefined symbols:
- c:\syslib\6809\io_disk.rel (concatenated path/file)
- d:\special\io_comm.rel (absolute path/file)
+ c:\syslib\6809\io_disk.rel (concatenated path/file)
+ d:\special\io_comm.rel (absolute path/file)
all other path(s)/file(s) don't exist. (No errors are reported
- for non existant path(s)/file(s).)
+ for non existant path(s)/file(s).)
- 2.4 ASLINK PROCESSING
+ 2.4 ASLINK PROCESSING
The linker processes the files in the order they are
of any specified library file(s) and the importing of the module
containing the symbol definition. After the first pass the -b
(area base address) definitions, if any, are processed and the
- areas linked.
+ areas linked.
The area linking proceeds by first examining the area types
ABS, CON, REL, OVR and PAG. Absolute areas (ABS) from separate
completion of the area linking all area addresses and lengths
have been determined. The areas of type PAG are verified to be
on a 256 byte boundary and that the length does not exceed 256
- bytes. Any errors are noted on stderr and in the map file.
+ bytes. Any errors are noted on stderr and in the map file.
Next the global symbol definitions (-g option), if any, are
processed. The symbol definitions have been delayed until this
point because the absolute addresses of all internal symbols are
- known and can be used in the expression calculations.
+ known and can be used in the expression calculations.
Before continuing with the linking process the symbol table
is scanned to determine if any symbols have been referenced but
not defined. Undefined symbols are listed on the stderr device.
if a .module directive was included in the assembled file the
module making the reference to this undefined variable will be
- printed.
+ printed.
Constants defined as global in more than one module will be
flagged as multiple definitions if their values are not identi-
- cal.
+ cal.
After the preceeding processes are complete the linker may
output a map file (-m option). This file provides the following
- information:
+ information:
- 1. Global symbol values and label absolute addresses
+ 1. Global symbol values and label absolute addresses
- 2. Defined areas and there lengths
+ 2. Defined areas and there lengths
- 3. Remaining undefined symbols
+ 3. Remaining undefined symbols
- 4. List of modules linked
+ 4. List of modules linked
- 5. List of library modules linked
+ 5. List of library modules linked
- 6. List of -b and -g definitions
+ 6. List of -b and -g definitions
the listing files (file.lst) associated with the relocation
files (file.rel) are scanned and used to create a new file
(file.rst) which has all addresses and data relocated to their
- final values.
+ final values.
\f
LINKER INPUT FORMAT
- 2.5 LINKER INPUT FORMAT
+ 2.5 LINKER INPUT FORMAT
The linkers' input object file is an ascii file containing
the information needed by the linker to bind multiple object
- modules into a complete loadable memory image.
+ modules into a complete loadable memory image.
- The object module contains the following designators:
+ The object module contains the following designators:
[XDQ][HL]
X Hexidecimal radix
D Decimal radix
Q Octal radix
-
+
H Most significant byte first
L Least significant byte first
-
- H Header
+
+ H Header
M Module
A Area
S Symbol
P Paging information
- 2.5.1 Object Module Format
+ 2.5.1 Object Module Format
The first line of an object module contains the [XDQ][HL]
format specifier (i.e. XH indicates a hexidecimal file with
- most significant byte first) for the following designators.
+ most significant byte first) for the following designators.
- 2.5.2 Header Line
+ 2.5.2 Header Line
- H aa areas gg global symbols
+ H aa areas gg global symbols
The header line specifies the number of areas(aa) and the
number of global symbols(gg) defined or referenced in this ob-
- ject module segment.
+ ject module segment.
\f
LINKER INPUT FORMAT
- 2.5.3 Module Line
+ 2.5.3 Module Line
- M name
+ M name
The module line specifies the module name from which this
header segment was assembled. The module line will not appear
- if the .module directive was not used in the source program.
+ if the .module directive was not used in the source program.
- 2.5.4 Symbol Line
+ 2.5.4 Symbol Line
- S string Defnnnn
+ S string Defnnnn
- or
+ or
- S string Refnnnn
+ S string Refnnnn
The symbol line defines (Def) or references (Ref) the symbol
'string' with the value nnnn. The defined value is relative to
the current area base address. References to constants and ex-
ternal global symbols will always appear before the first area
definition. References to external symbols will have a value of
- zero.
+ zero.
- 2.5.5 Area Line
+ 2.5.5 Area Line
- A label size ss flags ff
+ A label size ss flags ff
The area line defines the area label, the size (ss) of the
area in bytes, and the area flags (ff). The area flags specify
- the ABS, REL, CON, OVR, and PAG parameters:
+ the ABS, REL, CON, OVR, and PAG parameters:
- OVR/CON (0x04/0x00 i.e. bit position 2)
+ OVR/CON (0x04/0x00 i.e. bit position 2)
- ABS/REL (0x08/0x00 i.e. bit position 3)
+ ABS/REL (0x08/0x00 i.e. bit position 3)
- PAG (0x10 i.e. bit position 4)
+ PAG (0x10 i.e. bit position 4)
- 2.5.6 T Line
+ 2.5.6 T Line
- T xx xx nn nn nn nn nn ...
+ T xx xx nn nn nn nn nn ...
The T line contains the assembled code output by the assem-
bler with xx xx being the offset address from the current area
base address and nn being the assembled instructions and data in
- byte format.
+ byte format.
\f
LINKER INPUT FORMAT
- 2.5.7 R Line
+ 2.5.7 R Line
- R 0 0 nn nn n1 n2 xx xx ...
+ R 0 0 nn nn n1 n2 xx xx ...
The R line provides the relocation information to the linker.
The nn nn value is the current area index, i.e. which area the
current values were assembled. Relocation information is en-
- coded in groups of 4 bytes:
+ coded in groups of 4 bytes:
1. n1 is the relocation mode and object format, for the
- adhoc extension modes refer to asxxxx.h or aslink.h
- 1. bit 0 word(0x00)/byte(0x01)
- 2. bit 1 relocatable area(0x00)/symbol(0x02)
- 3. bit 2 normal(0x00)/PC relative(0x04) relocation
+ adhoc extension modes refer to asxxxx.h or aslink.h
+ 1. bit 0 word(0x00)/byte(0x01)
+ 2. bit 1 relocatable area(0x00)/symbol(0x02)
+ 3. bit 2 normal(0x00)/PC relative(0x04) relocation
4. bit 3 1-byte(0x00)/2-byte(0x08) object format for
- byte data
- 5. bit 4 signed(0x00)/unsigned(0x10) byte data
- 6. bit 5 normal(0x00)/page '0'(0x20) reference
- 7. bit 6 normal(0x00)/page 'nnn'(0x40) reference
+ byte data
+ 5. bit 4 signed(0x00)/unsigned(0x10) byte data
+ 6. bit 5 normal(0x00)/page '0'(0x20) reference
+ 7. bit 6 normal(0x00)/page 'nnn'(0x40) reference
8. bit 7 LSB byte(0x00)/MSB byte(0x80) with 2-byte
- mode
+ mode
2. n2 is a byte index into the corresponding (i.e. pre-
ceeding) T line data (i.e. a pointer to the data to be
updated by the relocation). The T line data may be
1-byte or 2-byte byte data format or 2-byte word
- format.
+ format.
3. xx xx is the area/symbol index for the area/symbol be-
ing referenced. the corresponding area/symbol is found
- in the header area/symbol lists.
+ in the header area/symbol lists.
The groups of 4 bytes are repeated for each item requiring relo-
- cation in the preceeding T line.
+ cation in the preceeding T line.
- 2.5.8 P Line
+ 2.5.8 P Line
- P 0 0 nn nn n1 n2 xx xx
+ P 0 0 nn nn n1 n2 xx xx
The P line provides the paging information to the linker as
specified by a .setdp directive. The format of the relocation
information is identical to that of the R line. The correspond-
- ing T line has the following information:
- T xx xx aa aa bb bb
+ ing T line has the following information:
+ T xx xx aa aa bb bb
Where aa aa is the area reference number which specifies the
selected page area and bb bb is the base address of the page.
address is on a 256 byte boundary and that the page length of an
- area defined with the PAG type is not larger than 256 bytes.
+ area defined with the PAG type is not larger than 256 bytes.
The linker defaults any direct page references to the first
area defined in the input REL file. All ASxxxx assemblers will
- specify the _CODE area first, making this the default page area.
+ specify the _CODE area first, making this the default page area.
- 2.6 LINKER ERROR MESSAGES
+ 2.6 LINKER ERROR MESSAGES
The linker provides detailed error messages allowing the pro-
grammer to quickly find the errant code. As the linker com-
pletes pass 1 over the input file(s) it reports any page
- boundary or page length errors as follows:
+ boundary or page length errors as follows:
?ASlink-Warning-Paged Area PAGE0 Boundary Error
-
+
and/or
-
+
?ASlink-Warning-Paged Area PAGE0 Length Error
- where PAGE0 is the paged area.
+ where PAGE0 is the paged area.
During Pass two the linker reads the T, R, and P lines per-
forming the necessary relocations and outputting the absolute
- code. Various errors may be reported during this process
- The P line processing can produce only one possible error:
+ code. Various errors may be reported during this process
+ The P line processing can produce only one possible error:
?ASlink-Warning-Page Definition Boundary Error
file module pgarea pgoffset
The error message specifies the file and module where the .setdp
direct was issued and indicates the page area and the page
- offset value determined after relocation.
+ offset value determined after relocation.
- The R line processing produces various errors:
+ The R line processing produces various errors:
?ASlink-Warning-Byte PCR relocation error for symbol bra2
file module area offset
(Defin) the symbol. If the symbol is defined in the same module
as the reference the linker is unable to report the symbol name.
The assembler listing file(s) should be examined at the offset
- from the specified area to located the offending code.
+ from the specified area to located the offending code.
- The errors are:
+ The errors are:
1. The byte PCR error is caused by exceeding the pc rela-
- tive byte branch range.
+ tive byte branch range.
2. The Unsigned byte error indicates an indexing value was
- negative or larger than 255.
+ negative or larger than 255.
3. The Page0 error is generated if the direct page vari-
- able is not in the page0 range of 0 to 255.
+ able is not in the page0 range of 0 to 255.
4. The page mode error is generated if the direct variable
- is not within the current direct page (6809).
+ is not within the current direct page (6809).
\f
INTEL HEX OUTPUT FORMAT
- 2.7 INTEL HEX OUTPUT FORMAT
+ 2.7 INTEL HEX OUTPUT FORMAT
Record Mark Field - This field signifies the start of a
record, and consists of an ascii colon
- (:).
+ (:).
Record Length Field - This field consists of two ascii
characters which indicate the number of
the number of bytes in binary to two
ascii characters, high digit first. An
End of File record contains two ascii
- zeros in this field.
+ zeros in this field.
Load Address Field - This field consists of the four ascii
characters which result from converting
the the binary value of the address in
which to begin loading this record. The
- order is as follows:
+ order is as follows:
- High digit of high byte of address.
- Low digit of high byte of address.
- High digit of low byte of address.
- Low digit of low byte of address.
+ High digit of high byte of address.
+ Low digit of high byte of address.
+ High digit of low byte of address.
+ Low digit of low byte of address.
In an End of File record this field con-
sists of either four ascii zeros or the
program entry address. Currently the
- entry address option is not supported.
+ entry address option is not supported.
Record Type Field - This field identifies the record type,
which is either 0 for data records or 1
for an End of File record. It consists
of two ascii characters, with the high
digit of the record type first, followed
- by the low digit of the record type.
+ by the low digit of the record type.
Data Field - This field consists of the actual data,
converted to two ascii characters, high
digit first. There are no data bytes in
- the End of File record.
+ the End of File record.
Checksum Field - The checksum field is the 8 bit binary
sum of the record length field, the load
and the data field. This sum is then
negated (2's complement) and converted
to two ascii characters, high digit
- first.
+ first.
\f
THE LINKER Page 2-12
MOTOROLA S1-S9 OUTPUT FORMAT
- 2.8 MOTORLA S1-S9 OUTPUT FORMAT
+ 2.8 MOTORLA S1-S9 OUTPUT FORMAT
Record Type Field - This field signifies the start of a
record and identifies the the record
- type as follows:
+ type as follows:
- Ascii S1 - Data Record
- Ascii S9 - End of File Record
+ Ascii S1 - Data Record
+ Ascii S9 - End of File Record
Record Length Field - This field specifies the record length
which includes the address, data, and
checksum fields. The 8 bit record
length value is converted to two ascii
- characters, high digit first.
+ characters, high digit first.
Load Address Field - This field consists of the four ascii
characters which result from converting
the the binary value of the address in
which to begin loading this record. The
- order is as follows:
+ order is as follows:
- High digit of high byte of address.
- Low digit of high byte of address.
- High digit of low byte of address.
- Low digit of low byte of address.
+ High digit of high byte of address.
+ Low digit of high byte of address.
+ High digit of low byte of address.
+ Low digit of low byte of address.
In an End of File record this field con-
sists of either four ascii zeros or the
program entry address. Currently the
- entry address option is not supported.
+ entry address option is not supported.
Data Field - This field consists of the actual data,
converted to two ascii characters, high
digit first. There are no data bytes in
- the End of File record.
+ the End of File record.
Checksum Field - The checksum field is the 8 bit binary
sum of the record length field, the load
address field, and the data field. This
sum is then complemented (1's comple-
ment) and converted to two ascii
- characters, high digit first.
+ characters, high digit first.
\f
The assemblers and linker have been successfully compiled us-
ing the DECUS C (PDP-11) compiler (patch level 9) with
RT-11/TSX+, Eyring Research Institute, Inc. PDOS (680x0) C
- V5.4b compiler, and Symantec C/C++ V6.1/V7.2.
+ V5.4b compiler, and Symantec C/C++ V6.1/V7.2.
The device specific header file (i.e. m6800.h, m6801.h,
etc.) contains the DECUS C 'BUILD' directives for generating a
command file to compile, assemble, and link the necessary files
- to prepare an executable image for a particular assembler.
+ to prepare an executable image for a particular assembler.
- 3.1 BUILDING AN ASSEMBLER
+ 3.1 BUILDING AN ASSEMBLER
The building of a typical assembler (6809 for example) re-
- quires the following files:
-
- 1. M6809.H
- 2. M09EXT.C
- 3. M09MCH.C
- 4. M09ADR.C
- 5. M09PST.C
- 6. ASXXXX.H
- 7. ASMAIN.C
- 8. ASLEX.C
- 9. ASSYM.C
- 10. ASSUBR.C
- 11. ASEXPR.C
- 12. ASDATA.C
- 13. ASLIST.C
- 14. ASOUT.C
+ quires the following files:
+
+ 1. M6809.H
+ 2. M09EXT.C
+ 3. M09MCH.C
+ 4. M09ADR.C
+ 5. M09PST.C
+ 6. ASXXXX.H
+ 7. ASMAIN.C
+ 8. ASLEX.C
+ 9. ASSYM.C
+ 10. ASSUBR.C
+ 11. ASEXPR.C
+ 12. ASDATA.C
+ 13. ASLIST.C
+ 14. ASOUT.C
The first five files are the 6809 processor dependent sec-
- tions which contain the following:
+ tions which contain the following:
\f
1. m6809.h - header file containing the machine specific
definitions of constants, variables, structures, and
- types
+ types
2. m09ext - device description, byte order, and file ex-
- tension information
+ tension information
3. m09pst - a table of the assembler general directives,
special device directives, and assembler mnemonics with
- associated operation codes
+ associated operation codes
4. m09mch / m09adr - machine specific code for processing
the device mnemonics, addressing modes, and special
- directives
+ directives
The remaining nine files provide the device independent sec-
tions which handle the details of file input/output, symbol
table generation, program/data areas, expression analysis, and
- assembler directive processing.
+ assembler directive processing.
- 3.2 BUILDING ASLINK
+ 3.2 BUILDING ASLINK
- The building of the linker requires the following files:
+ The building of the linker requires the following files:
- 1. ASLINK.H
- 2. LKMAIN.C
- 3. LKLEX.C
- 4. LKAREA.C
- 5. LKHEAD.C
- 6. LKSYM.C
- 7. LKEVAL.C
- 8. LKDATA.C
- 9. LKLIST.C
- 10. LKRLOC.C
- 11. LKLIBR.C
- 12. LKS19.C
- 13. LKIHX.C
+ 1. ASLINK.H
+ 2. LKMAIN.C
+ 3. LKLEX.C
+ 4. LKAREA.C
+ 5. LKHEAD.C
+ 6. LKSYM.C
+ 7. LKEVAL.C
+ 8. LKDATA.C
+ 9. LKLIST.C
+ 10. LKRLOC.C
+ 11. LKLIBR.C
+ 12. LKS19.C
+ 13. LKIHX.C
\f
- A.1 6800 REGISTER SET
+ A.1 6800 REGISTER SET
- The following is a list of the 6800 registers used by AS6800:
+ The following is a list of the 6800 registers used by AS6800:
a,b - 8-bit accumulators
x - index register
- A.2 6800 INSTRUCTION SET
+ A.2 6800 INSTRUCTION SET
The following tables list all 6800/6802/6808 mnemonics recog-
nized by the AS6800 assembler. The designation [] refers to a
required addressing mode argument. The following list specifies
- the format for each addressing mode supported by AS6800:
+ the format for each addressing mode supported by AS6800:
#data immediate data
byte or word data
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
,x register indirect addressing
zero offset
-
+
offset,x register indirect addressing
0 <= offset <= 255
-
+
ext extended addressing
-
+
label branch label
The terms data, dir, offset, ext, and label may all be expres-
- sions.
+ sions.
\f
Note that not all addressing modes are valid with every in-
- struction, refer to the 6800 technical data for valid modes.
+ struction, refer to the 6800 technical data for valid modes.
- A.2.1 Inherent Instructions
+ A.2.1 Inherent Instructions
aba cba
clc cli
tba tpa
tsx txs
wai
-
+
psha pshb
psh a psh b
pula pulb
pul a pul b
- A.2.2 Branch Instructions
+ A.2.2 Branch Instructions
bra label bhi label
bls label bcc label
6800 INSTRUCTION SET
- A.2.3 Single Operand Instructions
+ A.2.3 Single Operand Instructions
asla aslb
asl a asl b
asl []
-
+
asra asrb
asr a asr b
asr []
-
+
clra clrb
clr a clr b
clr []
-
+
coma comb
com a com b
com []
-
+
deca decb
dec a dec b
dec []
-
+
inca incb
inc a inc b
inc []
-
+
lsla lslb
lsl a lsl b
lsl []
-
+
lsra lsrb
lsr a lsr b
lsr []
-
+
nega negb
neg a neg b
neg []
-
+
rola rolb
rol a rol b
rol []
-
+
rora rorb
ror a ror b
ror []
-
+
tsta tstb
tst a tst b
tst []
6800 INSTRUCTION SET
- A.2.4 Double Operand Instructions
+ A.2.4 Double Operand Instructions
adca [] adcb []
adc a [] adc b []
-
+
adda [] addb []
add a [] add b []
-
+
anda [] andb []
and a [] and b []
-
+
bita [] bitb []
bit a [] bit b []
-
+
cmpa [] cmpb []
cmp a [] cmp b []
-
+
eora [] eorb []
eor a [] eor b []
-
+
ldaa [] ldab []
lda a [] lda b []
-
+
oraa [] orab []
ora a [] ora b []
-
+
sbca [] sbcb []
sbc a [] sbc b []
-
+
staa [] stab []
sta a [] sta b []
-
+
suba [] subb []
sub a [] sub b []
- A.2.5 Jump and Jump to Subroutine Instructions
+ A.2.5 Jump and Jump to Subroutine Instructions
jmp [] jsr []
6800 INSTRUCTION SET
- A.2.6 Long Register Instructions
+ A.2.6 Long Register Instructions
cpx []
lds [] sts []
- B.1 .hd6303 DIRECTIVE
+ B.1 .hd6303 DIRECTIVE
- Format:
+ Format:
- .hd6303
+ .hd6303
The .hd6303 directive enables processing of the HD6303 specific
mnemonics not included in the 6801 instruction set. HD6303
mnemonics encountered without the .hd6303 directive will be
- flagged with an 'o' error.
+ flagged with an 'o' error.
- B.2 6801 REGISTER SET
+ B.2 6801 REGISTER SET
- The following is a list of the 6801 registers used by AS6801:
+ The following is a list of the 6801 registers used by AS6801:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
x - index register
- B.3 6801 INSTRUCTION SET
+ B.3 6801 INSTRUCTION SET
The following tables list all 6801/6303 mnemonics recognized
by the AS6801 assembler. The designation [] refers to a re-
quired addressing mode argument. The following list specifies
- the format for each addressing mode supported by AS6801:
+ the format for each addressing mode supported by AS6801:
#data immediate data
byte or word data
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
\f
AS6801 ASSEMBLER PAGE B-2
,x register indirect addressing
zero offset
-
+
offset,x register indirect addressing
0 <= offset <= 255
-
+
ext extended addressing
-
+
label branch label
The terms data, dir, offset, ext, and label may all be expres-
- sions.
+ sions.
Note that not all addressing modes are valid with every in-
struction, refer to the 6801/6303 technical data for valid
- modes.
+ modes.
- B.3.1 Inherent Instructions
+ B.3.1 Inherent Instructions
aba abx
cba clc
wai
- B.3.2 Branch Instructions
+ B.3.2 Branch Instructions
bra label brn label
bhi label bls label
6801 INSTRUCTION SET
- B.3.3 Single Operand Instructions
+ B.3.3 Single Operand Instructions
asla aslb asld
asl a asl b asl d
asl []
-
+
asra asrb
asr a asr b
asr []
-
+
clra clrb
clr a clr b
clr []
-
+
coma comb
com a com b
com []
-
+
deca decb
dec a dec b
dec []
-
+
eora eorb
eor a eor b
eor []
-
+
inca incb
inc a inc b
inc []
-
+
lsla lslb lsld
lsl a lsl b lsl d
lsl []
-
+
lsra lsrb lsrd
lsr a lsr b lsr d
lsr []
-
+
nega negb
neg a neg b
neg []
-
+
psha pshb pshx
psh a psh b psh x
-
+
pula pulb pulx
pul a pul b pul x
-
+
rola rolb
rol a rol b
rol []
-
+
\f
AS6801 ASSEMBLER PAGE B-4
rora rorb
ror a ror b
ror []
-
+
tsta tstb
tst a tst b
tst []
- B.3.4 Double Operand Instructions
+ B.3.4 Double Operand Instructions
adca [] adcb []
adc a [] adc b []
-
+
adda [] addb [] addd []
add a [] add b [] add d []
-
+
anda [] andb []
and a [] and b []
-
+
bita [] bitb []
bit a [] bit b []
-
+
cmpa [] cmpb []
cmp a [] cmp b []
-
+
ldaa [] ldab []
lda a [] lda b []
-
+
oraa [] orab []
ora a [] ora b []
-
+
sbca [] sbcb []
sbc a [] sbc b []
-
+
staa [] stab []
sta a [] sta b []
-
+
suba [] subb [] subd []
sub a [] sub b [] sub d []
6801 INSTRUCTION SET
- B.3.5 Jump and Jump to Subroutine Instructions
+ B.3.5 Jump and Jump to Subroutine Instructions
jmp [] jsr []
- B.3.6 Long Register Instructions
+ B.3.6 Long Register Instructions
cpx [] ldd []
lds [] ldx []
stx []
- B.3.7 6303 Specific Instructions
+ B.3.7 6303 Specific Instructions
aim #data, [] eim #data, []
oim #data, [] tim #data, []
-
+
xgdx slp
\f
- Requires the .setdp directive to specify the ram area.
+ Requires the .setdp directive to specify the ram area.
- C.1 6804 REGISTER SET
+ C.1 6804 REGISTER SET
- The following is a list of the 6804 registers used by AS6804:
+ The following is a list of the 6804 registers used by AS6804:
x,y - index registers
- C.2 6804 INSTRUCTION SET
+ C.2 6804 INSTRUCTION SET
The following tables list all 6804 mnemonics recognized by
the AS6804 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
- format for each addressing mode supported by AS6804:
+ format for each addressing mode supported by AS6804:
#data immediate data
byte or word data
-
+
,x register indirect addressing
-
+
dir direct addressing
(see .setdp directive)
0 <= dir <= 255
-
+
ext extended addressing
-
+
label branch label
The terms data, dir, and ext may be expressions. The label for
- the short branchs beq, bne, bcc, and bcs must not be external.
+ the short branchs beq, bne, bcc, and bcs must not be external.
Note that not all addressing modes are valid with every in-
- struction, refer to the 6804 technical data for valid modes.
+ struction, refer to the 6804 technical data for valid modes.
\f
AS6804 ASSEMBLER PAGE C-2
6804 INSTRUCTION SET
- C.2.1 Inherent Instructions
+ C.2.1 Inherent Instructions
coma decx
decy incx
tya wait
- C.2.2 Branch Instructions
+ C.2.2 Branch Instructions
bne label beq label
bcc label bcs label
- C.2.3 Single Operand Instructions
+ C.2.3 Single Operand Instructions
add []
and []
sub []
- C.2.4 Jump and Jump to Subroutine Instructions
+ C.2.4 Jump and Jump to Subroutine Instructions
jsr []
jmp []
- C.2.5 Bit Test Instructions
+ C.2.5 Bit Test Instructions
brclr #data,[],label
brset #data,[],label
-
+
bclr #label,[]
bset #label,[]
6804 INSTRUCTION SET
- C.2.6 Load Immediate data Instruction
+ C.2.6 Load Immediate data Instruction
mvi [],#data
- C.2.7 6804 Derived Instructions
+ C.2.7 6804 Derived Instructions
asla
bam label
- D.1 6805 REGISTER SET
+ D.1 6805 REGISTER SET
- The following is a list of the 6805 registers used by AS6805:
+ The following is a list of the 6805 registers used by AS6805:
a - 8-bit accumulator
x - index register
- D.2 6805 INSTRUCTION SET
+ D.2 6805 INSTRUCTION SET
The following tables list all 6805 mnemonics recognized by
the AS6805 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
- format for each addressing mode supported by AS6805:
+ format for each addressing mode supported by AS6805:
#data immediate data
byte or word data
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
,x register indirect addressing
zero offset
-
+
offset,x register indirect addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
-
+
ext extended addressing
-
+
label branch label
\f
6805 INSTRUCTION SET
- The terms data, dir, offset, and ext may all be expressions.
+ The terms data, dir, offset, and ext may all be expressions.
Note that not all addressing modes are valid with every in-
- struction, refer to the 6805 technical data for valid modes.
+ struction, refer to the 6805 technical data for valid modes.
- D.2.1 Control Instructions
+ D.2.1 Control Instructions
clc cli
nop rsp
wait
- D.2.2 Bit Manipulation Instructions
+ D.2.2 Bit Manipulation Instructions
brset #data,*dir,label
brclr #data,*dir,label
-
+
bset #data,*dir
bclr #data,*dir
- D.2.3 Branch Instructions
+ D.2.3 Branch Instructions
bra label brn label
bhi label bls label
6805 INSTRUCTION SET
- D.2.4 Read-Modify-Write Instructions
+ D.2.4 Read-Modify-Write Instructions
nega negx
neg []
-
+
coma comx
com []
-
+
lsra lsrx
lsr []
-
+
rora rorx
ror []
-
+
asra asrx
asr []
-
+
lsla lslx
lsl []
-
+
rola rolx
rol []
-
+
deca decx
dec []
-
+
inca incx
inc []
-
+
tsta tstx
tst []
-
+
clra clrx
clr []
- D.2.5 Register\Memory Instructions
+ D.2.5 Register\Memory Instructions
sub [] cmp []
sbc [] cpx []
6805 INSTRUCTION SET
- D.2.6 Jump and Jump to Subroutine Instructions
+ D.2.6 Jump and Jump to Subroutine Instructions
jmp [] jsr []
\f
- E.1 68HC08 REGISTER SET
+ E.1 68HC08 REGISTER SET
The following is a list of the 68HC08 registers used by
- AS68HC08:
+ AS68HC08:
a - 8-bit accumulator
x - index register <H:X>
s - stack pointer
- E.2 68HC08 INSTRUCTION SET
+ E.2 68HC08 INSTRUCTION SET
The following tables list all 68HC08 mnemonics recognized by
the AS6808 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
- format for each addressing mode supported by AS6808:
+ format for each addressing mode supported by AS6808:
#data immediate data
byte or word data
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
,x register indexed addressing
zero offset
-
+
offset,x register indexed addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
-
+
,x+ register indexed addressing
zero offset with post increment
\f
68HC08 INSTRUCTION SET
-
+
offset,x+ register indexed addressing
unsigned byte offset with post increment
-
+
offset,s stack pointer indexed addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
-
+
ext extended addressing
-
+
label branch label
- The terms data, dir, offset, and ext may all be expressions.
+ The terms data, dir, offset, and ext may all be expressions.
Note that not all addressing modes are valid with every in-
- struction, refer to the 68HC08 technical data for valid modes.
+ struction, refer to the 68HC08 technical data for valid modes.
- E.2.1 Control Instructions
+ E.2.1 Control Instructions
clc cli daa div
mul nop nsa psha
txa txs wait
- E.2.2 Bit Manipulation Instructions
+ E.2.2 Bit Manipulation Instructions
brset #data,*dir,label
brclr #data,*dir,label
-
+
bset #data,*dir
bclr #data,*dir
\f
68HC08 INSTRUCTION SET
- E.2.3 Branch Instructions
+ E.2.3 Branch Instructions
bra label brn label
bhi label bls label
ble label
- E.2.4 Complex Branch Instructions
+ E.2.4 Complex Branch Instructions
cbeqa [],label
cbeqx [],label
68HC08 INSTRUCTION SET
- E.2.5 Read-Modify-Write Instructions
+ E.2.5 Read-Modify-Write Instructions
nega negx
neg []
-
+
coma comx
com []
-
+
lsra lsrx
lsr []
-
+
rora rorx
ror []
-
+
asra asrx
asr []
-
+
asla aslx
asl []
-
+
lsla lslx
lsl []
-
+
rola rolx
rol []
-
+
deca decx
dec []
-
+
inca incx
inc []
-
+
tsta tstx
tst []
-
+
clra clrx
clr [] clrh
-
+
aix #data
-
+
ais #data
\f
68HC08 INSTRUCTION SET
- E.2.6 Register\Memory Instructions
+ E.2.6 Register\Memory Instructions
sub [] cmp []
sbc [] cpx []
ldx [] stx []
- E.2.7 Double Operand Move Instruction
+ E.2.7 Double Operand Move Instruction
mov [],[]
- E.2.8 16-Bit <H:X> Index Register Instructions
+ E.2.8 16-Bit <H:X> Index Register Instructions
cphx []
ldhx []
sthx []
- E.2.9 Jump and Jump to Subroutine Instructions
+ E.2.9 Jump and Jump to Subroutine Instructions
jmp [] jsr []
\f
- F.1 6809 REGISTER SET
+ F.1 6809 REGISTER SET
- The following is a list of the 6809 registers used by AS6809:
+ The following is a list of the 6809 registers used by AS6809:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
dp - direct page
- F.2 6809 INSTRUCTION SET
+ F.2 6809 INSTRUCTION SET
The following tables list all 6809 mnemonics recognized by
the AS6809 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
- format for each addressing mode supported by AS6809:
+ format for each addressing mode supported by AS6809:
#data immediate data
byte or word data
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
label branch label
-
+
r,r1,r2 registers
cc,a,b,d,dp,x,y,s,u,pc
-
+
,-x ,--x register indexed
autodecrement
-
+
\f
AS6809 ASSEMBLER PAGE F-2
,x+ ,x++ register indexed
autoincrement
-
+
,x register indexed addressing
zero offset
-
+
offset,x register indexed addressing
-16 <= offset <= 15 --- 5-bit
-128 <= offset <= -17 --- 8-bit
128 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
-
+
a,x accumulator offset indexed addressing
-
+
ext extended addressing
-
+
ext,pc pc addressing ( pc <- pc + ext )
-
+
ext,pcr pc relative addressing
-
+
[,--x] register indexed indirect
autodecrement
-
+
[,x++] register indexed indirect
autoincrement
-
+
[,x] register indexed indirect addressing
zero offset
-
+
[offset,x] register indexed indirect addressing
-128 <= offset <= 127 --- 8-bit
-32768 <= offset <= -129 --- 16-bit
128 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
-
+
[a,x] accumulator offset indexed
indirect addressing
-
+
[ext] extended indirect addressing
-
+
[ext,pc] pc indirect addressing
( [pc <- pc + ext] )
-
+
[ext,pcr] pc relative indirect addressing
The terms data, dir, label, offset, and ext may all be expres-
- sions.
+ sions.
\f
Note that not all addressing modes are valid with every in-
- struction, refer to the 6809 technical data for valid modes.
+ struction, refer to the 6809 technical data for valid modes.
- F.2.1 Inherent Instructions
+ F.2.1 Inherent Instructions
abx daa
mul nop
swi3 sync
- F.2.2 Short Branch Instructions
+ F.2.2 Short Branch Instructions
bcc label bcs label
beq label bge label
bsr label
- F.2.3 Long Branch Instructions
+ F.2.3 Long Branch Instructions
lbcc label lbcs label
lbeq label lbge label
6809 INSTRUCTION SET
- F.2.4 Single Operand Instructions
+ F.2.4 Single Operand Instructions
asla aslb
asl []
-
+
asra asrb
asr []
-
+
clra clrb
clr []
-
+
coma comb
com []
-
+
deca decb
dec []
-
+
inca incb
inc []
-
+
lsla lslb
lsl []
-
+
lsra lsrb
lsr []
-
+
nega negb
neg []
-
+
rola rolb
rol []
-
+
rora rorb
ror []
-
+
tsta tstb
tst []
\f
6809 INSTRUCTION SET
- F.2.5 Double Operand Instructions
+ F.2.5 Double Operand Instructions
adca [] adcb []
-
+
adda [] addb []
-
+
anda [] andb []
-
+
bita [] bitb []
-
+
cmpa [] cmpb []
-
+
eora [] eorb []
-
+
lda [] ldb []
-
+
ora [] orb []
-
+
sbca [] sbcb []
-
+
sta [] stb []
-
+
suba [] subb []
- F.2.6 D-register Instructions
+ F.2.6 D-register Instructions
addd [] subd []
cmpd [] ldd []
std []
- F.2.7 Index/Stack Register Instructions
+ F.2.7 Index/Stack Register Instructions
cmps [] cmpu []
cmpx [] cmpy []
-
+
lds [] ldu []
ldx [] ldy []
-
+
leas [] leau []
leax [] leay []
-
+
sts [] stu []
stx [] sty []
-
+
pshs r pshu r
puls r pulu r
\f
6809 INSTRUCTION SET
- F.2.8 Jump and Jump to Subroutine Instructions
+ F.2.8 Jump and Jump to Subroutine Instructions
jmp [] jsr []
- F.2.9 Register - Register Instructions
+ F.2.9 Register - Register Instructions
exg r1,r2 tfr r1,r2
- F.2.10 Condition Code Register Instructions
+ F.2.10 Condition Code Register Instructions
andcc #data orcc #data
cwai #data
- F.2.11 6800 Compatibility Instructions
+ F.2.11 6800 Compatibility Instructions
aba cba
clc cli
- G.1 68HC11 REGISTER SET
+ G.1 68HC11 REGISTER SET
- The following is a list of the 68HC11 registers used by AS6811:
+ The following is a list of the 68HC11 registers used by AS6811:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
x,y - index registers
- G.2 68HC11 INSTRUCTION SET
+ G.2 68HC11 INSTRUCTION SET
The following tables list all 68HC11 mnemonics recognized by
the AS6811 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
- format for each addressing mode supported by AS6811:
+ format for each addressing mode supported by AS6811:
#data immediate data
byte or word data
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
,x register indirect addressing
zero offset
-
+
offset,x register indirect addressing
0 <= offset <= 255
-
+
ext extended addressing
-
+
label branch label
- The terms data, dir, offset, and ext may all be expressions.
+ The terms data, dir, offset, and ext may all be expressions.
\f
Note that not all addressing modes are valid with every in-
- struction, refer to the 68HC11 technical data for valid modes.
+ struction, refer to the 68HC11 technical data for valid modes.
- G.2.1 Inherent Instructions
+ G.2.1 Inherent Instructions
aba abx
aby cba
tsx txs
wai xgdx
xgdy
-
+
psha pshb
psh a psh b
pshx pshy
psh x psh y
-
+
pula pulb
pul a pul b
pulx puly
pul x pul y
- G.2.2 Branch Instructions
+ G.2.2 Branch Instructions
bra label brn label
bhi label bls label
68HC11 INSTRUCTION SET
- G.2.3 Single Operand Instructions
+ G.2.3 Single Operand Instructions
asla aslb asld
asl a asl b asl d
asl []
-
+
asra asrb
asr a asr b
asr []
-
+
clra clrb
clr a clr b
clr label
-
+
coma comb
com a com b
com []
-
+
deca decb
dec a dec b
dec []
-
+
inca incb
inc a inc b
inc []
-
+
lsla lslb lsld
lsl a lsl b lsl d
lsl []
-
+
lsra lsrb lsrd
lsr a lsr b lsr d
lsr []
-
+
nega negb
neg a neg b
neg []
-
+
rola rolb
rol a rol b
rol []
-
+
rora rorb
ror a ror b
ror []
-
+
tsta tstb
tst a tst b
tst []
68HC11 INSTRUCTION SET
- G.2.4 Double Operand Instructions
+ G.2.4 Double Operand Instructions
adca [] adcb []
adc a [] adc b []
-
+
adda [] addb [] addd []
add a [] add b [] add d []
-
+
anda [] andb []
and a [] and b []
-
+
bita [] bitb []
bit a [] bit b []
-
+
cmpa [] cmpb []
cmp a [] cmp b []
-
+
eora [] eorb []
eor a [] eor b []
-
+
ldaa [] ldab []
lda a [] lda b []
-
+
oraa [] orab []
ora a [] ora b []
-
+
sbca [] sbcb []
sbc a [] sbc b []
-
+
staa [] stab []
sta a [] sta b []
-
+
suba [] subb [] subd []
sub a [] sub b [] sub d []
- G.2.5 Bit Manupulation Instructions
+ G.2.5 Bit Manupulation Instructions
bclr [],#data
bset [],#data
-
+
brclr [],#data,label
brset [],#data,label
68HC11 INSTRUCTION SET
- G.2.6 Jump and Jump to Subroutine Instructions
+ G.2.6 Jump and Jump to Subroutine Instructions
jmp [] jsr []
- G.2.7 Long Register Instructions
+ G.2.7 Long Register Instructions
cpx [] cpy []
-
+
ldd [] lds []
ldx [] ldy []
-
+
std [] sts []
stx [] sty []
\f
- H.1 68HC12 REGISTER SET
+ H.1 68HC12 REGISTER SET
- The following is a list of the 68HC12 registers used by AS6812:
+ The following is a list of the 68HC12 registers used by AS6812:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
ccr,cc - condition code register
- H.2 68HC12 INSTRUCTION SET
+ H.2 68HC12 INSTRUCTION SET
The following tables list all 68HC12 mnemonics recognized by
the AS6812 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
- format for each addressing mode supported by AS6812:
+ format for each addressing mode supported by AS6812:
#data immediate data
byte or word data
-
+
ext extended addressing
-
+
pg memory page number
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
label branch label
-
+
r,r1,r2 registers
ccr,a,b,d,x,y,sp,pc
-
+
\f
AS6812 ASSEMBLER PAGE H-2
-x x- register indexed, pre or
,-x ,x- post autodecrement by 1
-
+
n,-x n,x- register indexed, pre or
post autodecrement by 1 - 8
-
+
+x x+ register indexed, pre or
,+x ,x+ post autoincrement by 1
-
+
n,+x n,x+ register indexed, pre or
post autoincrement by 1 - 8
-
+
offset,x register indexed addressing
-16 <= offset <= 15 --- 5-bit
-256 <= offset <= -17 --- 9-bit
256 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
-
+
[offset,x] register indexed indirect addressing
-32768 <= offset <= 32767 --- 16-bit
-
+
[,x] register indexed indirect addressing
zero offset
-
+
a,x accumulator offset indexed addressing
-
+
[d,x] d accumulator offset indexed
indirect addressing
The terms data, dir, label, offset, and ext may all be expres-
- sions.
+ sions.
Note that not all addressing modes are valid with every in-
- struction, refer to the 68HC12 technical data for valid modes.
+ struction, refer to the 68HC12 technical data for valid modes.
\f
AS6812 ASSEMBLER PAGE H-3
68HC12 INSTRUCTION SET
- H.2.1 Inherent Instructions
+ H.2.1 Inherent Instructions
aba bgnd cba
daa dex dey
wavr
- H.2.2 Short Branch Instructions
+ H.2.2 Short Branch Instructions
bcc label bcs label
beq label bge label
bsr label
- H.2.3 Long Branch Instructions
+ H.2.3 Long Branch Instructions
lbcc label lbcs label
lbeq label lbge label
68HC12 INSTRUCTION SET
- H.2.4 Branch on Decrement, Test, or Increment
+ H.2.4 Branch on Decrement, Test, or Increment
dbeq r,label dbne r,label
ibeq r,label ibne r,label
tbeq r,label tbne r,label
- H.2.5 Bit Clear and Set Instructions
+ H.2.5 Bit Clear and Set Instructions
bclr [],#data
bset [],#data
- H.2.6 Branch on Bit Clear or Set
+ H.2.6 Branch on Bit Clear or Set
brclr [],#data,label
brset [],#data,label
68HC12 INSTRUCTION SET
- H.2.7 Single Operand Instructions
+ H.2.7 Single Operand Instructions
asla aslb
asl []
-
+
asra asrb
asr []
-
+
clra clrb
clr []
-
+
coma comb
com []
-
+
deca decb
dec []
-
+
inca incb
inc []
-
+
lsla lslb
lsl []
-
+
lsra lsrb
lsr []
-
+
nega negb
neg []
-
+
rola rolb
rol []
-
+
rora rorb
ror []
-
+
tsta tstb
tst []
\f
68HC12 INSTRUCTION SET
- H.2.8 Double Operand Instructions
+ H.2.8 Double Operand Instructions
adca [] adcb []
-
+
adda [] addb []
-
+
anda [] andb []
-
+
bita [] bitb []
-
+
cmpa [] cmpb []
-
+
eora [] eorb []
-
+
ldaa [] <=> lda []
-
+
ldab [] <=> ldb []
-
+
oraa [] <=> ora []
-
+
orab [] <=> orb []
-
+
sbca [] sbcb []
-
+
staa [] <=> sta []
-
+
stab [] <=> stb []
-
+
suba [] subb []
- H.2.9 Move Instructions
+ H.2.9 Move Instructions
movb [],[] movw [],[]
- H.2.10 D-register Instructions
+ H.2.10 D-register Instructions
addd [] subd []
cpd [] <=> cmpd []
68HC12 INSTRUCTION SET
- H.2.11 Index/Stack Register Instructions
+ H.2.11 Index/Stack Register Instructions
cps [] <=> cmps []
cpx [] <=> cmpx []
cpy [] <=> cmpy []
-
+
lds []
ldx [] ldy []
-
+
leas []
leax [] leay []
-
+
sts []
stx [] sty []
- H.2.12 Jump and Jump/Call to Subroutine Instructions
+ H.2.12 Jump and Jump/Call to Subroutine Instructions
call [],pg
jmp [] jsr []
- H.2.13 Other Special Instructions
+ H.2.13 Other Special Instructions
emacs []
emaxd [] emaxm []
tbl [] trap #data
- H.2.14 Register - Register Instructions
+ H.2.14 Register - Register Instructions
exg r1,r2 sex r1,r2
tfr r1,r2
- H.2.15 Condition Code Register Instructions
+ H.2.15 Condition Code Register Instructions
andcc #data orcc #data
\f
68HC12 INSTRUCTION SET
- H.2.16 M68HC11 Compatibility Mode Instructions
+ H.2.16 M68HC11 Compatibility Mode Instructions
abx aby clc
cli clv des
- I.1 68HC16 REGISTER SET
+ I.1 68HC16 REGISTER SET
- The following is a list of the 68HC16 registers used by AS6816:
+ The following is a list of the 68HC16 registers used by AS6816:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
ccr - condition code
- I.2 68HC16 INSTRUCTION SET
+ I.2 68HC16 INSTRUCTION SET
The following tables list all 68HC16 mnemonics recognized by
the AS6816 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
- format for each addressing mode supported by AS6816:
+ format for each addressing mode supported by AS6816:
#data immediate data
byte or word data
-
+
#xo,#yo local immediate data (mac / rmac)
-
+
label branch label
-
+
r register
ccr,a,b,d,e,x,y,z,s
-
+
,x zero offset register indexed addressing
,x8
,x16
-
+
offset,x register indexed addressing
\f
256 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
-
+
offset,x8 unsigned 8-bit offset indexed addressing
offset,x16 signed 16-bit offset indexed addressing
-
+
e,x accumulator offset indexed addressing
-
+
ext extended addressing
-
+
bank 64K bank number (jmp / jsr)
The terms data, label, offset, bank, and ext may all be expres-
- sions.
+ sions.
Note that not all addressing modes are valid with every in-
- struction, refer to the 6816 technical data for valid modes.
+ struction, refer to the 6816 technical data for valid modes.
- I.2.1 Inherent Instructions
+ I.2.1 Inherent Instructions
aba abx aby abz
ace aced ade adx
68HC16 INSTRUCTION SET
- I.2.2 Push/Pull Multiple Register Instructions
+ I.2.2 Push/Pull Multiple Register Instructions
pshm r,... pulm r,...
- I.2.3 Short Branch Instructions
+ I.2.3 Short Branch Instructions
bcc label bcs label
beq label bge label
bsr label
- I.2.4 Long Branch Instructions
+ I.2.4 Long Branch Instructions
lbcc label lbcs label
lbeq label lbge label
lbsr label
- I.2.5 Bit Manipulation Instructions
+ I.2.5 Bit Manipulation Instructions
bclr [],#data
bset [],#data
-
+
brclr [],#data,label
brset [],#data,label
\f
68HC16 INSTRUCTION SET
- I.2.6 Single Operand Instructions
+ I.2.6 Single Operand Instructions
asla aslb
asld asle
aslm
asl [] aslw []
-
+
asra asrb
asrd asre
asrm
asr [] asrw []
-
+
clra clrb
clrd clre
clrm
clr [] clrw []
-
+
coma comb
comd come
com [] comw []
-
+
deca decb
dec [] decw []
-
+
inca incb
inc [] incw []
-
+
lsla lslb
lsld lsle
lslm
lsl [] lslw []
-
+
lsra lsrb
lsrd lsre
lsr [] lsrw []
-
+
nega negb
negd nege
neg [] negw []
-
+
rola rolb
rold role
rol [] rolw []
-
+
rora rorb
rord rore
ror [] rorw []
-
+
tsta tstb
tsta tste
tst [] tstw []
68HC16 INSTRUCTION SET
- I.2.7 Double Operand Instructions
+ I.2.7 Double Operand Instructions
adca [] adcb []
adcd [] adce []
-
+
adda [] addb []
addd [] adde []
-
+
anda [] andb []
andd [] ande []
-
+
bita [] bitb []
-
+
cmpa [] cmpb []
cpd [] cpe []
-
+
eora [] eorb []
eord [] eore []
-
+
ldaa [] ldab []
ldd [] lde []
-
+
oraa [] orab []
ord [] ore []
-
+
sbca [] sbcb []
sbcd [] sbce []
-
+
staa [] stab []
std [] ste []
-
+
suba [] subb []
subd [] sube []
- I.2.8 Index/Stack Register Instructions
+ I.2.8 Index/Stack Register Instructions
cps [] cpx []
cpy [] cpz []
-
+
lds [] ldx []
ldy [] ldz []
-
+
sts [] stx []
sty [] stz []
\f
68HC16 INSTRUCTION SET
- I.2.9 Jump and Jump to Subroutine Instructions
+ I.2.9 Jump and Jump to Subroutine Instructions
jmp bank,[] jsr bank,[]
- I.2.10 Condition Code Register Instructions
+ I.2.10 Condition Code Register Instructions
andp #data orp #data
- I.2.11 Multiply and Accumulate Instructions
+ I.2.11 Multiply and Accumulate Instructions
mac #data rmac #data
mac #xo,#yo rmac #xo,#yo
- J.1 H8/3XX REGISTER SET
+ J.1 H8/3XX REGISTER SET
- The following is a list of the H8 registers used by ASH8:
+ The following is a list of the H8 registers used by ASH8:
r0 - r7,sp 16-bit accumulators
r0L - r7L,spL 8-bit accumulators
ccr condition code
- J.2 H8/3XX INSTRUCTION SET
+ J.2 H8/3XX INSTRUCTION SET
The following tables list all H8/3xx mnemonics recognized by
the ASH8 assembler. The designation [] refers to a required ad-
dressing mode argument. The following list specifies the format
- for each addressing mode supported by ASH8:
+ for each addressing mode supported by ASH8:
#xx:3 immediate data (3 bit)
#xx:8 immediate data (8 bit)
#xx:16 immediate data (16 bit)
-
+
*dir direct page addressing
(see .setdp directive)
0xFF00 <= dir <= 0xFFFF
-
+
label branch label
-
-
+
+
rn registers (16 bit)
r0-r7,sp
-
+
rnB registers (8 bit)
r0H-r7H,r0L-r7L,spH,spL
-
+
\f
ASH8 ASSEMBLER PAGE J-2
ccr condition code register
-
+
@rn register indirect
-
+
@-rn register indirect (auto pre-decrement)
-
+
@rn+ register indirect (auto post-increment)
-
+
@[offset,rn] register indirect, 16-bit displacement
-
+
@@offset memory indirect, (8-bit address)
-
+
ext extended addressing (16-bit)
The terms data, dir, label, offset, and ext may all be expres-
- sions.
+ sions.
Note that not all addressing modes are valid with every in-
- struction, refer to the H8/3xx technical data for valid modes.
+ struction, refer to the H8/3xx technical data for valid modes.
- J.2.1 Inherent Instructions
+ J.2.1 Inherent Instructions
eepmov
nop
rts
- J.2.2 Branch Instructions
+ J.2.2 Branch Instructions
bcc label bcs label
beq label bf label
H8/3XX INSTRUCTION SET
- J.2.3 Single Operand Instructions
+ J.2.3 Single Operand Instructions
Free Form
-
+
daa rnB das rnB
-
+
dec rnB inc rnB
-
+
neg rnB not rnB
-
+
rotxl rnB rotxr rnB
-
+
rotl rnB rotr rnB
-
+
shal rnB shar rnB
-
+
shll rnB shlr rnB
-
+
push rn pop rn
-
-
+
+
Byte / Word Form
-
+
daa.b rnB das.b rnB
-
+
dec.b rnB inc.b rnB
-
+
neg.b rnB not.b rnB
-
+
rotxl.b rnB rotxr.b rnB
-
+
rotl.b rnB rotr.b rnB
-
+
shal.b rnB shar.b rnB
-
+
shll.b rnB shlr.b rnB
-
+
push.w rn pop.w rn
\f
H8/3XX INSTRUCTION SET
- J.2.4 Double Operand Instructions
+ J.2.4 Double Operand Instructions
Free Form
-
+
add rnB,rnB add #xx:8,rnB
add rn,rn
adds #1,rn adds #2,rn
addx rnB,rnB addx #xx:8,rnB
-
+
cmp rnB,rnB cmp #xx:8,rnB
cmp rn,rn
-
+
sub rnB,rnB
sub rn,rn
subs #1,rn subs #2,rn
subx rnB,rnB subx #xx:8,rnB
-
+
and rnB,rnB and #xx:8,rnB
and #xx:8,ccr
-
+
or rnB,rnB or #xx:8,rnB
or #xx:8,ccr
-
+
xor rnB,rnB xor #xx:8,rnB
xor #xx:8,ccr
-
-
+
+
Byte / Word Form
-
+
add.b rnB,rnB add.b #xx:8,rnB
add.w rn,rn
-
+
cmp.b rnB,rnB cmp.b #xx:8,rnB
cmp.w rn,rn
-
+
sub.b rnB,rnB
sub.w rn,rn
-
+
addx.b rnB,rnB addx.b #xx:8,rnB
-
+
and.b rnB,rnB and.b #xx:8,rnB
and.b #xx:8,ccr
-
+
or.b rnB,rnB or.b #xx:8,rnB
or.b #xx:8,ccr
-
+
subx.b rnB,rnB subx.b #xx:8,rnB
-
+
xor.b rnB,rnB xor.b #xx:8,rnB
xor.b #xx:8,ccr
\f
H8/3XX INSTRUCTION SET
- J.2.5 Mov Instructions
+ J.2.5 Mov Instructions
Free Form
-
+
mov rnB,rnB mov rn,rn
mov #xx:8,rnB mov #xx:16,rn
mov @rn,rnB mov @rn,rn
mov rnB,*dir
mov rnB,@label mov rn,@label
mov rnB,label mov rn,label
-
-
+
+
Byte / Word Form
-
+
mov.b rnB,rnB mov.w rn,rn
mov.b #xx:8,rnB mov.w #xx:16,rn
mov.b @rn,rnB mov.w @rn,rn
H8/3XX INSTRUCTION SET
- J.2.6 Bit Manipulation Instructions
+ J.2.6 Bit Manipulation Instructions
bld #xx:3,rnB bld #xx:3,@rn
bld #xx:3,@dir bld #xx:3,dir
bld #xx:3,*@dir bld #xx:3,*dir
-
+
bild #xx:3,rnB bild #xx:3,@rn
bild #xx:3,@dir bild #xx:3,dir
bild #xx:3,*@dir bild #xx:3,*dir
-
+
bst #xx:3,rnB bst #xx:3,@rn
bst #xx:3,@dir bst #xx:3,dir
bst #xx:3,*@dir bst #xx:3,*dir
-
+
bist #xx:3,rnB bist #xx:3,@rn
bist #xx:3,@dir bist #xx:3,dir
bist #xx:3,*@dir bist #xx:3,*dir
-
+
band #xx:3,rnB band #xx:3,@rn
band #xx:3,@dir band #xx:3,dir
band #xx:3,*@dir band #xx:3,*dir
-
+
biand #xx:3,rnB biand #xx:3,@rn
biand #xx:3,@dir biand #xx:3,dir
biand #xx:3,*@dir biand #xx:3,*dir
-
+
bor #xx:3,rnB bor #xx:3,@rn
bor #xx:3,@dir bor #xx:3,dir
bor #xx:3,*@dir bor #xx:3,*dir
-
+
bior #xx:3,rnB bior #xx:3,@rn
bior #xx:3,@dir bior #xx:3,dir
bior #xx:3,*@dir bior #xx:3,*dir
-
+
bxor #xx:3,rnB bxor #xx:3,@rn
bxor #xx:3,@dir bxor #xx:3,dir
bxor #xx:3,*@dir bxor #xx:3,*dir
-
+
bixor #xx:3,rnB bixor #xx:3,@rn
bixor #xx:3,@dir bixor #xx:3,dir
bixor #xx:3,*@dir bixor #xx:3,*dir
H8/3XX INSTRUCTION SET
- J.2.7 Extended Bit Manipulation Instructions
+ J.2.7 Extended Bit Manipulation Instructions
bset #xx:3,rnB bset #xx:3,@rn
bset #xx:3,@dir bset #xx:3,dir
bset rnB,rnB bset rnB,@rn
bset rnB,@dir bset rnB,dir
bset rnB,*@dir bset rnB,*dir
-
+
bclr #xx:3,rnB bclr #xx:3,@rn
bclr #xx:3,@dir bclr #xx:3,dir
bclr #xx:3,*@dir bclr #xx:3,*dir
bclr rnB,rnB bclr rnB,@rn
bclr rnB,@dir bclr rnB,dir
bclr rnB,*@dir bclr rnB,*dir
-
+
bnot #xx:3,rnB bnot #xx:3,@rn
bnot #xx:3,@dir bnot #xx:3,dir
bnot #xx:3,*@dir bnot #xx:3,*dir
bnot rnB,rnB bnot rnB,@rn
bnot rnB,@dir bnot rnB,dir
bnot rnB,*@dir bnot rnB,*dir
-
+
btst #xx:3,rnB btst #xx:3,@rn
btst #xx:3,@dir btst #xx:3,dir
btst #xx:3,*@dir btst #xx:3,*dir
btst rnB,*@dir btst rnB,*dir
- J.2.8 Condition Code Instructions
+ J.2.8 Condition Code Instructions
andc #xx:8,ccr andc #xx:8
and #xx:8,ccr and.b #xx:8,ccr
-
+
ldc #xx:8,ccr ldc #xx:8
ldc rnB,ccr ldc rnB
-
+
orc #xx:8,ccr orc #xx:8
or #xx:8,ccr or.b #xx:8,ccr
-
+
xorc #xx:8,ccr xorc #xx:8
xor #xx:8,ccr xor.b #xx:8,ccr
-
+
stc ccr,rnB stc rnB
\f
H8/3XX INSTRUCTION SET
- J.2.9 Other Instructions
+ J.2.9 Other Instructions
divxu rnB,rn divxu.b rnB,rn
-
+
mulxu rnB,rn mulxu.b rnB,rn
-
+
movfpe @label,rnB movfpe label,rnB
movfpe.b @label,rnB movfpe.b label,rnB
-
+
movtpe @label,rnB movtpe label,rnB
movtpe.b @label,rnB movtpe.b label,rnB
- J.2.10 Jump and Jump to Subroutine Instructions
+ J.2.10 Jump and Jump to Subroutine Instructions
jmp @rn jmp @@dir
jmp @label jmp label
-
+
jsr @rn jsr @@dir
jsr @label jsr label
\f
- K.1 ACKNOWLEDGMENT
+ K.1 ACKNOWLEDGMENT
Thanks to John Hartman for his contribution of the AS8051
- cross assembler.
+ cross assembler.
John L. Hartman
jhartman@compuserve.com
- K.2 8051 REGISTER SET
+ K.2 8051 REGISTER SET
- The following is a list of the 8051 registers used by AS8051:
+ The following is a list of the 8051 registers used by AS8051:
a,b - 8-bit accumulators
r0,r1,r2,r3 - 8-bit registers
8051 REGISTER SET
- K.3 8051 INSTRUCTION SET
+ K.3 8051 INSTRUCTION SET
The following tables list all 8051 mnemonics recognized by
the AS8051 assembler. The following list specifies the format
- for each addressing mode supported by AS8051:
+ for each addressing mode supported by AS8051:
#data immediate data
byte or word data
-
+
r,r1,r2 register r0,r1,r2,r3,r4,r5,r6, or r7
-
+
@r indirect on register r0 or r1
@dptr indirect on data pointer
@a+dptr indirect on accumulator
plus data pointer
@a+pc indirect on accumulator
plus program counter
-
+
addr direct memory address
-
+
bitaddr bit address
-
+
label call or jump label
- The terms data, addr, bitaddr, and label may all be expressions.
+ The terms data, addr, bitaddr, and label may all be expressions.
Note that not all addressing modes are valid with every in-
- struction. Refer to the 8051 technical data for valid modes.
+ struction. Refer to the 8051 technical data for valid modes.
- K.3.1 Inherent Instructions
+ K.3.1 Inherent Instructions
nop
\f
8051 INSTRUCTION SET
- K.3.2 Move Instructions
+ K.3.2 Move Instructions
mov a,#data mov a,addr
mov a,r mov a,@r
-
+
mov r,#data mov r,addr
mov r,a
-
+
mov addr,a mov addr,#data
mov addr,r mov addr,@r
mov addr1,addr2 mov bitaddr,c
-
+
mov @r,#data mov @r,addr
mov @r,a
-
+
mov c,bitaddr
mov dptr,#data
-
+
movc a,@a+dptr movc a,@a+pc
movx a,@dptr movx a,@r
movx @dptr,a movx @r,a
- K.3.3 Single Operand Instructions
+ K.3.3 Single Operand Instructions
clr a clr c
clr bitaddr
cpl a cpl c
cpl bitaddr
setb c setb bitaddr
-
- da a
+
+ da a
rr a rrc a
rl a rlc a
swap a
-
+
dec a dec r
dec @r
inc a inc r
inc dptr inc @r
-
+
div ab mul ab
-
+
pop addr push addr
\f
8051 INSTRUCTION SET
- K.3.4 Two Operand Instructions
+ K.3.4 Two Operand Instructions
add a,#data add a,addr
add a,r add a,@r
xch a,@r xchd a,@r
- K.3.5 Call and Return Instructions
+ K.3.5 Call and Return Instructions
acall label lcall label
ret reti
rst data
- K.3.6 Jump Instructions
+ K.3.6 Jump Instructions
ajmp label
cjne a,#data,label cjne a,addr,label
8051 INSTRUCTION SET
- K.3.7 Predefined Symbols: SFR Map
+ K.3.7 Predefined Symbols: SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
88 TCON TMOD TL0 TL1 8B
84 PCON 87
80 P0 SP DPL DPH 83
-
+
[...] Indicates Resident in 8052, not 8051
\f
8051 INSTRUCTION SET
- K.3.8 Predefined Symbols: SFR Bit Addresses
+ K.3.8 Predefined Symbols: SFR Bit Addresses
---------- 4 BITS ----------
---- ---- ---- ----
88 TCON.0 TCON.1 TCON.2 TCON.3 8B
84 P0.4 P0.5 P0.6 P0.7 87
80 P0.0 P0.1 P0.2 P0.3 83
-
+
[...] Indicates Resident in 8052, not 8051
\f
8051 INSTRUCTION SET
- K.3.9 Predefined Symbols: Control Bits
+ K.3.9 Predefined Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
88 IT0 IE0 IT1 IE1 8B
84 87
80 83
-
+
[...] Indicates Resident in 8052, not 8051
\f
- L.1 8085 REGISTER SET
+ L.1 8085 REGISTER SET
The following is a list of the 8080/8085 registers used by
- AS8085:
+ AS8085:
a,b,c,d,e,h,l - 8-bit accumulators
m - memory through (hl)
psw - status word
- L.2 8085 INSTRUCTION SET
+ L.2 8085 INSTRUCTION SET
The following tables list all 8080/8085 mnemonics recognized
by the AS8085 assembler. The following list specifies the
- format for each addressing mode supported by AS8085:
+ format for each addressing mode supported by AS8085:
#data immediate data
byte or word data
-
+
r,r1,r2 register or register pair
psw,a,b,c,d,e,h,l
bc,de,hl,sp,pc
-
+
m memory address using (hl)
-
+
addr direct memory addressing
-
+
label call or jump label
- The terms data, m, addr, and label may be expressions.
+ The terms data, m, addr, and label may be expressions.
Note that not all addressing modes are valid with every in-
struction, refer to the 8080/8085 technical data for valid
- modes.
+ modes.
\f
AS8085 ASSEMBLER PAGE L-2
8085 INSTRUCTION SET
- L.2.1 Inherent Instructions
+ L.2.1 Inherent Instructions
cma cmc
daa di
xthl
- L.2.2 Register/Memory/Immediate Instructions
+ L.2.2 Register/Memory/Immediate Instructions
adc r adc m aci #data
add r add m adi #data
xra r xra m xri #data
- L.2.3 Call and Return Instructions
+ L.2.3 Call and Return Instructions
cc label rc
cm label rm
call label
- L.2.4 Jump Instructions
+ L.2.4 Jump Instructions
jc label
jm label
8085 INSTRUCTION SET
- L.2.5 Input/Output/Reset Instructions
+ L.2.5 Input/Output/Reset Instructions
in data
out data
rst data
- L.2.6 Move Instructions
+ L.2.6 Move Instructions
mov r1,r2
mov r,m
mov m,r
-
+
mvi r,#data
mvi m,#data
- L.2.7 Other Instructions
+ L.2.7 Other Instructions
dcr r dcr m
inr r inr m
-
+
dad r dcx r
inx r ldax r
pop r push r
stax r
-
+
lda addr lhld addr
shld addr sta addr
-
+
lxi r,#data
\f
- M.1 .hd64 DIRECTIVE
+ M.1 .hd64 DIRECTIVE
- Format:
+ Format:
- .hd64
+ .hd64
The .hd64 directive enables processing of the HD64180 specific
mnemonics not included in the Z80 instruction set. HD64180
mnemonics encountered without the .hd64 directive will be
- flagged with an 'o' error.
+ flagged with an 'o' error.
- M.2 Z80 REGISTER SET AND CONDITIONS
+ M.2 Z80 REGISTER SET AND CONDITIONS
The following is a complete list of register designations and
- condition mnemonics:
+ condition mnemonics:
byte registers - a,b,c,d,e,h,l,i,r
register pairs - af,af',bc,de,hl
word registers - pc,sp,ix,iy
-
+
C - carry bit set
M - sign bit set
NC - carry bit clear
Z80 INSTRUCTION SET
- M.3 Z80 INSTRUCTION SET
+ M.3 Z80 INSTRUCTION SET
The following tables list all Z80/HD64180 mnemonics recog-
nized by the ASZ80 assembler. The designation [] refers to a
required addressing mode argument. The following list specifies
- the format for each addressing mode supported by ASZ80:
+ the format for each addressing mode supported by ASZ80:
#data immediate data
byte or word data
-
+
n byte value
-
+
rg a byte register
a,b,c,d,e,h,l
-
+
rp a register pair
bc,de,hl
-
+
(hl) implied addressing or
register indirect addressing
-
+
(label) direct addressing
-
+
offset(ix) indexed addressing with
an offset
-
+
label call/jmp/jr label
The terms data, dir, offset, and ext may all be expressions.
The terms dir and offset are not allowed to be external refer-
- ences.
+ ences.
Note that not all addressing modes are valid with every in-
struction, refer to the Z80/HD64180 technical data for valid
- modes.
+ modes.
\f
ASZ80 ASSEMBLER PAGE M-3
Z80 INSTRUCTION SET
- M.3.1 Inherent Instructions
+ M.3.1 Inherent Instructions
ccf cpd
cpdr cpi
rrd scf
- M.3.2 Implicit Operand Instructions
+ M.3.2 Implicit Operand Instructions
adc a,[] adc []
add a,[] add []
Z80 INSTRUCTION SET
- M.3.3 Load Instruction
+ M.3.3 Load Instruction
ld rg,[] ld [],rg
ld (bc),a ld a,(bc)
ld a,i ld a,r
ld sp,hl ld sp,ix
ld sp,iy ld rp,#data
-
+
ldd lddr
ldi ldir
- M.3.4 Call/Return Instructions
+ M.3.4 Call/Return Instructions
call C,label ret C
call M,label ret M
call label ret
- M.3.5 Jump and Jump to Subroutine Instructions
+ M.3.5 Jump and Jump to Subroutine Instructions
jp C,label jp M,label
jp NC,label jp NZ,label
jp P,label jp PE,label
jp PO,label jp Z,label
-
+
jp (hl) jp (ix)
jp (iy) jp label
-
+
djnz label
-
+
jr C,label jr NC,label
jr NZ,label jr Z,label
jr label
Z80 INSTRUCTION SET
- M.3.6 Bit Manipulation Instructions
+ M.3.6 Bit Manipulation Instructions
bit n,[]
res n,[]
set n,[]
- M.3.7 Interrupt Mode and Reset Instructions
+ M.3.7 Interrupt Mode and Reset Instructions
im n
im n
rst n
- M.3.8 Input and Output Instructions
+ M.3.8 Input and Output Instructions
in a,(n) in rg,(c)
ind indr
ini inir
-
+
out (n),a out (c),rg
outd otdr
outi otir
- M.3.9 Register Pair Instructions
+ M.3.9 Register Pair Instructions
add hl,rp add ix,rp
add iy,rp
-
+
adc hl,rp sbc hl,rp
-
+
ex (sp),hl ex (sp),ix
ex (sp),iy
ex de,hl
ex af,af'
-
+
push rp pop rp
\f
Z80 INSTRUCTION SET
- M.3.10 HD64180 Specific Instructions
+ M.3.10 HD64180 Specific Instructions
in0 rg,(n)
out0 (n),rg
-
+
otdm otdmr
otim otimr
-
+
mlt bc mlt de
mlt hl mlt sp
-
+
slp
-
+
tst a
tstio #data
\f
- N.1 ACKNOWLEDGMENT
+ N.1 ACKNOWLEDGMENT
Thanks to Marko Makela for his contribution of the AS6500
- cross assembler.
+ cross assembler.
Marko Makela
Sillitie 10 A
EARN/BitNet: msmakela@finuh
Several additions and modifications were made to his code to
- support the following families of 6500 processors:
+ support the following families of 6500 processors:
(1) 650X and 651X processor family
(2) 65F11 and 65F12 processor family
The instruction syntax of this cross assembler contains two
peculiarities: (1) the addressing indirection is denoted by the
square brackets [] and (2) the `bbrx' and `bbsx' instructions
- are written `bbr0 memory,label'.
+ are written `bbr0 memory,label'.
\f
6500 REGISTER SET
- N.2 6500 REGISTER SET
+ N.2 6500 REGISTER SET
- The following is a list of the 6500 registers used by AS6500:
+ The following is a list of the 6500 registers used by AS6500:
a - 8-bit accumulator
x,y - index registers
- N.3 6500 INSTRUCTION SET
+ N.3 6500 INSTRUCTION SET
The following tables list all 6500 family mnemonics recog-
nized by the AS6500 assembler. The designation [] refers to a
required addressing mode argument. The following list specifies
- the format for each addressing mode supported by AS6500:
+ the format for each addressing mode supported by AS6500:
#data immediate data
byte or word data
-
+
*dir direct page addressing
(see .setdp directive)
- 0 <= dir <= 255
-
+ 0 <= dir <= 255
+
offset,x indexed addressing
offset,y indexed addressing
address = (offset + (x or y))
-
+
[offset,x] pre-indexed indirect addressing
0 <= offset <= 255
address = contents of location
(offset + (x or y)) mod 256
-
+
[offset],y post-indexed indirect addressing
address = contents of location at offset
plus the value of the y register
-
+
[address] indirect addressing
-
+
ext extended addressing
-
+
label branch label
-
+
address,label direct page memory location
branch label
bbrx and bbsx instruction addressing
The terms data, dir, offset, address, ext, and label may all be
- expressions.
+ expressions.
Note that not all addressing modes are valid with every in-
- struction, refer to the 65xx technical data for valid modes.
+ struction, refer to the 65xx technical data for valid modes.
\f
AS6500 ASSEMBLER PAGE N-3
6500 INSTRUCTION SET
- N.3.1 Processor Specific Directives
+ N.3.1 Processor Specific Directives
The AS6500 cross assembler has four (4) processor specific
assembler directives which define the target 65xx processor
- family:
+ family:
.r6500 Core 650X and 651X family (default)
.r65f11 Core plus 65F11 and 65F12
.r65c02 Core plus 65C02, 65C102, and 65C112
- N.3.2 65xx Core Inherent Instructions
+ N.3.2 65xx Core Inherent Instructions
brk clc
cld cli
tya
- N.3.3 65xx Core Branch Instructions
+ N.3.3 65xx Core Branch Instructions
bcc label bhs label
bcs label blo label
bvc label bvs label
- N.3.4 65xx Core Single Operand Instructions
+ N.3.4 65xx Core Single Operand Instructions
asl []
dec []
6500 INSTRUCTION SET
- N.3.5 65xx Core Double Operand Instructions
+ N.3.5 65xx Core Double Operand Instructions
adc []
and []
sta []
- N.3.6 65xx Core Jump and Jump to Subroutine Instructions
+ N.3.6 65xx Core Jump and Jump to Subroutine Instructions
jmp [] jsr []
- N.3.7 65xx Core Miscellaneous X and Y Register Instructions
+ N.3.7 65xx Core Miscellaneous X and Y Register Instructions
cpx []
cpy []
6500 INSTRUCTION SET
- N.3.8 65F11 and 65F12 Specific Instructions
+ N.3.8 65F11 and 65F12 Specific Instructions
bbr0 [],label bbr1 [],label
bbr2 [],label bbr3 [],label
bbr4 [],label bbr5 [],label
bbr6 [],label bbr7 [],label
-
+
bbs0 [],label bbs1 [],label
bbs2 [],label bbs3 [],label
bbs4 [],label bbs5 [],label
bbs6 [],label bbs7 [],label
-
+
rmb0 [] rmb1 []
rmb2 [] rmb3 []
rmb4 [] rmb5 []
rmb6 [] rmb7 []
-
+
smb0 [] smb1 []
smb2 [] smb3 []
smb4 [] smb5 []
smb6 [] smb7 []
- N.3.9 65C00/21 and 65C29 Specific Instructions
+ N.3.9 65C00/21 and 65C29 Specific Instructions
bbr0 [],label bbr1 [],label
bbr2 [],label bbr3 [],label
bbr4 [],label bbr5 [],label
bbr6 [],label bbr7 [],label
-
+
bbs0 [],label bbs1 [],label
bbs2 [],label bbs3 [],label
bbs4 [],label bbs5 [],label
bbs6 [],label bbs7 [],label
-
+
bra label
-
+
phx phy
plx ply
-
+
rmb0 [] rmb1 []
rmb2 [] rmb3 []
rmb4 [] rmb5 []
rmb6 [] rmb7 []
-
+
smb0 [] smb1 []
smb2 [] smb3 []
smb4 [] smb5 []
6500 INSTRUCTION SET
- N.3.10 65C02, 65C102, and 65C112 Specific Instructions
+ N.3.10 65C02, 65C102, and 65C112 Specific Instructions
bbr0 [],label bbr1 [],label
bbr2 [],label bbr3 [],label
bbr4 [],label bbr5 [],label
bbr6 [],label bbr7 [],label
-
+
bbs0 [],label bbs1 [],label
bbs2 [],label bbs3 [],label
bbs4 [],label bbs5 [],label
bbs6 [],label bbs7 [],label
-
+
bra label
-
+
phx phy
plx ply
-
+
rmb0 [] rmb1 []
rmb2 [] rmb3 []
rmb4 [] rmb5 []
rmb6 [] rmb7 []
-
+
smb0 [] smb1 []
smb2 [] smb3 []
smb4 [] smb5 []
smb6 [] smb7 []
-
+
stz []
trb []
tsb []
Additional addressing modes for the following core instruc-
tions are also available with the 65C02, 65C102, and 65C112 pro-
- cessors.
+ cessors.
adc [] and []
cmp [] eor []
lda [] ora []
sbc [] sta []
-
+
bit [] jmp []
-
+
dec inc
</PRE></B>
projects / fw / sdcc / commitdiff