static float
-_tomhz( uint32_t freq_hz )
+_tomhz(uint32_t freq_hz )
{
float f;
struct sam3_reg_list {
uint32_t address; size_t struct_offset; const char *name;
- void (*explain_func)( struct sam3_chip *pInfo );
+ void (*explain_func)(struct sam3_chip *pInfo );
};
target_t *t;
static struct sam3_chip *p;
- t = get_current_target( cmd_ctx );
- if ( !t ){
- command_print( cmd_ctx, "No current target?");
+ t = get_current_target(cmd_ctx );
+ if (!t ){
+ command_print(cmd_ctx, "No current target?");
return NULL;
}
p = all_sam3_chips;
- if ( !p ){
+ if (!p ){
// this should not happen
// the command is not registered until the chip is created?
- command_print( cmd_ctx, "No SAM3 chips exist?");
+ command_print(cmd_ctx, "No SAM3 chips exist?");
return NULL;
}
- while ( p ){
- if ( p->target == t ){
+ while (p ){
+ if (p->target == t ){
return p;
}
p = p->next;
}
- command_print( cmd_ctx, "Cannot find SAM3 chip?");
+ command_print(cmd_ctx, "Cannot find SAM3 chip?");
return NULL;
}
* @param v - result goes here
*/
static int
-EFC_GetStatus( struct sam3_bank_private *pPrivate, uint32_t *v )
+EFC_GetStatus(struct sam3_bank_private *pPrivate, uint32_t *v )
{
int r;
- r = target_read_u32( pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FSR, v );
+ r = target_read_u32(pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FSR, v );
LOG_DEBUG("Status: 0x%08x (lockerror: %d, cmderror: %d, ready: %d)",
(unsigned int)(*v),
((unsigned int)((*v >> 2) & 1)),
* @param v - result goes here
*/
static int
-EFC_GetResult( struct sam3_bank_private *pPrivate, uint32_t *v )
+EFC_GetResult(struct sam3_bank_private *pPrivate, uint32_t *v )
{
int r;
uint32_t rv;
- r = target_read_u32( pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FRR, &rv );
- if ( v ){
+ r = target_read_u32(pPrivate->pChip->target, pPrivate->controller_address + offset_EFC_FRR, &rv );
+ if (v ){
*v = rv;
}
LOG_DEBUG("Result: 0x%08x", ((unsigned int)(rv)));
case AT91C_EFC_FCMD_SLB:
case AT91C_EFC_FCMD_CLB:
n = (pPrivate->size_bytes / pPrivate->page_size);
- if ( argument >= n ){
+ if (argument >= n ){
LOG_ERROR("*BUG*: Embedded flash has only %u pages", (unsigned)(n));
}
break;
case AT91C_EFC_FCMD_SFB:
case AT91C_EFC_FCMD_CFB:
- if ( argument >= pPrivate->pChip->details.n_gpnvms ){
+ if (argument >= pPrivate->pChip->details.n_gpnvms ){
LOG_ERROR("*BUG*: Embedded flash has only %d GPNVMs",
pPrivate->pChip->details.n_gpnvms );
}
case AT91C_EFC_FCMD_GFB:
case AT91C_EFC_FCMD_STUI:
case AT91C_EFC_FCMD_SPUI:
- if ( argument != 0 ){
+ if (argument != 0 ){
LOG_ERROR("Argument is meaningless for cmd: %d", command );
}
break;
break;
}
- if ( command == AT91C_EFC_FCMD_SPUI ){
+ if (command == AT91C_EFC_FCMD_SPUI ){
// this is a very special situation.
// Situation (1) - error/retry - see below
// And we are being called recursively
// Situation (2) - normal, finished reading unique id
} else {
// it should be "ready"
- EFC_GetStatus( pPrivate, &v );
- if ( v & 1 ){
+ EFC_GetStatus(pPrivate, &v );
+ if (v & 1 ){
// then it is ready
// we go on
} else {
- if ( retry ){
+ if (retry ){
// we have done this before
// the controller is not responding.
LOG_ERROR("flash controller(%d) is not ready! Error", pPrivate->bank_number );
LOG_ERROR("Flash controller(%d) is not ready, attempting reset",
pPrivate->bank_number );
// we do that by issuing the *STOP* command
- EFC_StartCommand( pPrivate, AT91C_EFC_FCMD_SPUI, 0 );
+ EFC_StartCommand(pPrivate, AT91C_EFC_FCMD_SPUI, 0 );
// above is recursive, and further recursion is blocked by
- // if ( command == AT91C_EFC_FCMD_SPUI ) above
+ // if (command == AT91C_EFC_FCMD_SPUI ) above
goto do_retry;
}
}
v = (0x5A << 24) | (argument << 8) | command;
LOG_DEBUG("Command: 0x%08x", ((unsigned int)(v)) );
- r = target_write_u32( pPrivate->pBank->target,
+ r = target_write_u32(pPrivate->pBank->target,
pPrivate->controller_address + offset_EFC_FCR,
v);
- if ( r != ERROR_OK ){
+ if (r != ERROR_OK ){
LOG_DEBUG("Error Write failed");
}
return r;
* @param status - put command status bits here
*/
static int
-EFC_PerformCommand( struct sam3_bank_private *pPrivate,
+EFC_PerformCommand(struct sam3_bank_private *pPrivate,
unsigned command,
unsigned argument,
uint32_t *status)
long long ms_now, ms_end;
// default
- if ( status ){
+ if (status ){
*status = 0;
}
- r = EFC_StartCommand( pPrivate, command, argument );
- if ( r != ERROR_OK ){
+ r = EFC_StartCommand(pPrivate, command, argument );
+ if (r != ERROR_OK ){
return r;
}
do {
- r = EFC_GetStatus( pPrivate, &v );
- if ( r != ERROR_OK ){
+ r = EFC_GetStatus(pPrivate, &v );
+ if (r != ERROR_OK ){
return r;
}
ms_now = timeval_ms();
- if ( ms_now > ms_end ){
+ if (ms_now > ms_end ){
// error
LOG_ERROR("Command timeout");
return ERROR_FAIL;
}
}
- while ( (v & 1) == 0 )
+ while ((v & 1) == 0 )
;
// error bits..
- if ( status ){
+ if (status ){
*status = (v & 0x6);
}
return ERROR_OK;
*/
static int
-FLASHD_ReadUniqueID ( struct sam3_bank_private *pPrivate )
+FLASHD_ReadUniqueID (struct sam3_bank_private *pPrivate )
{
int r;
uint32_t v;
pPrivate->pChip->cfg.unique_id[3] = 0;
LOG_DEBUG("Begin");
- r = EFC_StartCommand( pPrivate, AT91C_EFC_FCMD_STUI, 0);
- if ( r < 0 ){
+ r = EFC_StartCommand(pPrivate, AT91C_EFC_FCMD_STUI, 0);
+ if (r < 0 ){
return r;
}
- for ( x = 0 ; x < 4 ; x++ ){
- r = target_read_u32( pPrivate->pChip->target,
+ for (x = 0 ; x < 4 ; x++ ){
+ r = target_read_u32(pPrivate->pChip->target,
pPrivate->pBank->base + (x * 4),
&v );
- if ( r < 0 ){
+ if (r < 0 ){
return r;
}
pPrivate->pChip->cfg.unique_id[x] = v;
}
- r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_SPUI, 0, NULL );
+ r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SPUI, 0, NULL );
LOG_DEBUG("End: R=%d, id = 0x%08x, 0x%08x, 0x%08x, 0x%08x",
r,
(unsigned int)(pPrivate->pChip->cfg.unique_id[0]),
* @param pPrivate - the info about the bank.
*/
static int
-FLASHD_EraseEntireBank( struct sam3_bank_private *pPrivate )
+FLASHD_EraseEntireBank(struct sam3_bank_private *pPrivate )
{
LOG_DEBUG("Here");
- return EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_EA, 0, NULL );
+ return EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_EA, 0, NULL );
}
*/
//------------------------------------------------------------------------------
static int
-FLASHD_GetGPNVM( struct sam3_bank_private *pPrivate, unsigned gpnvm, unsigned *puthere)
+FLASHD_GetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm, unsigned *puthere)
{
uint32_t v;
int r;
LOG_DEBUG("Here");
- if ( pPrivate->bank_number != 0 ){
+ if (pPrivate->bank_number != 0 ){
LOG_ERROR("GPNVM only works with Bank0");
return ERROR_FAIL;
}
- if ( gpnvm >= pPrivate->pChip->details.n_gpnvms ){
+ if (gpnvm >= pPrivate->pChip->details.n_gpnvms ){
LOG_ERROR("Invalid GPNVM %d, max: %d, ignored",
gpnvm,pPrivate->pChip->details.n_gpnvms );
return ERROR_FAIL;
}
// Get GPNVMs status
- r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_GFB, 0, NULL );
- if ( r != ERROR_OK ){
+ r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_GFB, 0, NULL );
+ if (r != ERROR_OK ){
LOG_ERROR("Failed");
return r;
}
r = EFC_GetResult(pPrivate, &v );
- if ( puthere ){
+ if (puthere ){
// Check if GPNVM is set
// get the bit and make it a 0/1
*puthere = (v >> gpnvm) & 1;
* Returns 0 if successful; otherwise returns an error code.
*/
static int
-FLASHD_ClrGPNVM( struct sam3_bank_private *pPrivate, unsigned gpnvm)
+FLASHD_ClrGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm)
{
int r;
unsigned v;
LOG_DEBUG("Here");
- if ( pPrivate->bank_number != 0 ){
+ if (pPrivate->bank_number != 0 ){
LOG_ERROR("GPNVM only works with Bank0");
return ERROR_FAIL;
}
- if ( gpnvm >= pPrivate->pChip->details.n_gpnvms ){
+ if (gpnvm >= pPrivate->pChip->details.n_gpnvms ){
LOG_ERROR("Invalid GPNVM %d, max: %d, ignored",
gpnvm,pPrivate->pChip->details.n_gpnvms );
return ERROR_FAIL;
}
- r = FLASHD_GetGPNVM( pPrivate, gpnvm, &v );
- if ( r != ERROR_OK ){
+ r = FLASHD_GetGPNVM(pPrivate, gpnvm, &v );
+ if (r != ERROR_OK ){
LOG_DEBUG("Failed: %d",r);
return r;
}
- r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_CFB, gpnvm, NULL);
+ r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_CFB, gpnvm, NULL);
LOG_DEBUG("End: %d",r);
return r;
}
*
*/
static int
-FLASHD_SetGPNVM( struct sam3_bank_private *pPrivate, unsigned gpnvm)
+FLASHD_SetGPNVM(struct sam3_bank_private *pPrivate, unsigned gpnvm)
{
int r;
unsigned v;
- if ( pPrivate->bank_number != 0 ){
+ if (pPrivate->bank_number != 0 ){
LOG_ERROR("GPNVM only works with Bank0");
return ERROR_FAIL;
}
- if ( gpnvm >= pPrivate->pChip->details.n_gpnvms ){
+ if (gpnvm >= pPrivate->pChip->details.n_gpnvms ){
LOG_ERROR("Invalid GPNVM %d, max: %d, ignored",
gpnvm,pPrivate->pChip->details.n_gpnvms );
return ERROR_FAIL;
}
- r = FLASHD_GetGPNVM( pPrivate, gpnvm, &v );
- if ( r != ERROR_OK ){
+ r = FLASHD_GetGPNVM(pPrivate, gpnvm, &v );
+ if (r != ERROR_OK ){
return r;
}
- if ( v ){
+ if (v ){
// already set
r = ERROR_OK;
} else {
// set it
- r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_SFB, gpnvm, NULL );
+ r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_SFB, gpnvm, NULL );
}
return r;
}
{
int r;
LOG_DEBUG("Here");
- r = EFC_PerformCommand( pPrivate, AT91C_EFC_FCMD_GLB, 0, NULL);
- if ( r == ERROR_OK ){
+ r = EFC_PerformCommand(pPrivate, AT91C_EFC_FCMD_GLB, 0, NULL);
+ if (r == ERROR_OK ){
r = EFC_GetResult(pPrivate, v );
}
LOG_DEBUG("End: %d",r);
*/
static int
-FLASHD_Unlock( struct sam3_bank_private *pPrivate,
+FLASHD_Unlock(struct sam3_bank_private *pPrivate,
unsigned start_sector,
unsigned end_sector )
{
static int
-FLASHD_Lock( struct sam3_bank_private *pPrivate,
+FLASHD_Lock(struct sam3_bank_private *pPrivate,
unsigned start_sector,
unsigned end_sector )
{
/* begin helpful debug code */
static void
-sam3_sprintf( struct sam3_chip *pChip , const char *fmt, ... )
+sam3_sprintf(struct sam3_chip *pChip , const char *fmt, ... )
{
va_list ap;
va_start(ap,fmt);
- if ( pChip->mbuf == NULL ){
+ if (pChip->mbuf == NULL ){
return;
}
- membuf_vsprintf( pChip->mbuf, fmt, ap );
+ membuf_vsprintf(pChip->mbuf, fmt, ap );
va_end(ap);
}
// print the fieldname, the field value, in dec & hex, and return field value
static uint32_t
-sam3_reg_fieldname( struct sam3_chip *pChip,
+sam3_reg_fieldname(struct sam3_chip *pChip,
const char *regname,
uint32_t value,
unsigned shift,
// extract the field
v = value >> shift;
v = v & ((1 << width)-1);
- if ( width <= 16 ){
+ if (width <= 16 ){
hwidth = 4;
dwidth = 5;
} else {
}
// show the basics
- sam3_sprintf( pChip, "\t%*s: %*d [0x%0*x] ",
+ sam3_sprintf(pChip, "\t%*s: %*d [0x%0*x] ",
REG_NAME_WIDTH, regname,
dwidth, v,
hwidth, v );
};
-static const char *_yes_or_no( uint32_t v )
+static const char *_yes_or_no(uint32_t v )
{
- if ( v ){
+ if (v ){
return "YES";
} else {
return "NO";
};
static void
-sam3_explain_ckgr_mor( struct sam3_chip *pChip )
+sam3_explain_ckgr_mor(struct sam3_chip *pChip )
{
uint32_t v;
uint32_t rcen;
v = sam3_reg_fieldname(pChip, "MOSCXTEN", pChip->cfg.CKGR_MOR, 0, 1 );
- sam3_sprintf( pChip, "(main xtal enabled: %s)\n",
+ sam3_sprintf(pChip, "(main xtal enabled: %s)\n",
_yes_or_no(v) );
v = sam3_reg_fieldname(pChip, "MOSCXTBY", pChip->cfg.CKGR_MOR, 1, 1 );
- sam3_sprintf( pChip, "(main osc bypass: %s)\n",
+ sam3_sprintf(pChip, "(main osc bypass: %s)\n",
_yes_or_no(v) );
rcen = sam3_reg_fieldname(pChip, "MOSCRCEN", pChip->cfg.CKGR_MOR, 2, 1 );
- sam3_sprintf( pChip, "(onchip RC-OSC enabled: %s)\n",
+ sam3_sprintf(pChip, "(onchip RC-OSC enabled: %s)\n",
_yes_or_no(rcen) );
v = sam3_reg_fieldname(pChip, "MOSCRCF", pChip->cfg.CKGR_MOR, 4, 3 );
- sam3_sprintf( pChip, "(onchip RC-OSC freq: %s)\n",
+ sam3_sprintf(pChip, "(onchip RC-OSC freq: %s)\n",
_rc_freq[v] );
pChip->cfg.rc_freq = 0;
- if ( rcen ){
- switch ( v ){
+ if (rcen ){
+ switch (v ){
default:
pChip->cfg.rc_freq = 0;
case 0:
}
v = sam3_reg_fieldname(pChip,"MOSCXTST", pChip->cfg.CKGR_MOR, 8, 8 );
- sam3_sprintf( pChip, "(startup clks, time= %f uSecs)\n",
+ sam3_sprintf(pChip, "(startup clks, time= %f uSecs)\n",
((float)(v * 1000000)) / ((float)(pChip->cfg.slow_freq)));
v = sam3_reg_fieldname(pChip, "MOSCSEL", pChip->cfg.CKGR_MOR, 24, 1 );
- sam3_sprintf( pChip, "(mainosc source: %s)\n",
+ sam3_sprintf(pChip, "(mainosc source: %s)\n",
v ? "external xtal" : "internal RC");
v = sam3_reg_fieldname(pChip,"CFDEN", pChip->cfg.CKGR_MOR, 25, 1 );
static void
-sam3_explain_chipid_cidr( struct sam3_chip *pChip )
+sam3_explain_chipid_cidr(struct sam3_chip *pChip )
{
int x;
uint32_t v;
const char *cp;
- sam3_reg_fieldname( pChip, "Version", pChip->cfg.CHIPID_CIDR, 0, 5 );
+ sam3_reg_fieldname(pChip, "Version", pChip->cfg.CHIPID_CIDR, 0, 5 );
sam3_sprintf(pChip,"\n");
- v = sam3_reg_fieldname( pChip, "EPROC", pChip->cfg.CHIPID_CIDR, 5, 3 );
- sam3_sprintf( pChip, "%s\n", eproc_names[v]);
+ v = sam3_reg_fieldname(pChip, "EPROC", pChip->cfg.CHIPID_CIDR, 5, 3 );
+ sam3_sprintf(pChip, "%s\n", eproc_names[v]);
- v = sam3_reg_fieldname( pChip, "NVPSIZE", pChip->cfg.CHIPID_CIDR, 8, 4 );
- sam3_sprintf( pChip, "%s\n", nvpsize[v]);
+ v = sam3_reg_fieldname(pChip, "NVPSIZE", pChip->cfg.CHIPID_CIDR, 8, 4 );
+ sam3_sprintf(pChip, "%s\n", nvpsize[v]);
- v = sam3_reg_fieldname( pChip, "NVPSIZE2", pChip->cfg.CHIPID_CIDR, 12, 4 );
- sam3_sprintf( pChip, "%s\n", nvpsize2[v]);
+ v = sam3_reg_fieldname(pChip, "NVPSIZE2", pChip->cfg.CHIPID_CIDR, 12, 4 );
+ sam3_sprintf(pChip, "%s\n", nvpsize2[v]);
- v = sam3_reg_fieldname( pChip, "SRAMSIZE", pChip->cfg.CHIPID_CIDR, 16,4 );
- sam3_sprintf( pChip, "%s\n", sramsize[ v ] );
+ v = sam3_reg_fieldname(pChip, "SRAMSIZE", pChip->cfg.CHIPID_CIDR, 16,4 );
+ sam3_sprintf(pChip, "%s\n", sramsize[ v ] );
- v = sam3_reg_fieldname( pChip, "ARCH", pChip->cfg.CHIPID_CIDR, 20, 8 );
+ v = sam3_reg_fieldname(pChip, "ARCH", pChip->cfg.CHIPID_CIDR, 20, 8 );
cp = _unknown;
- for ( x = 0 ; archnames[x].name ; x++ ){
- if ( v == archnames[x].value ){
+ for (x = 0 ; archnames[x].name ; x++ ){
+ if (v == archnames[x].value ){
cp = archnames[x].name;
break;
}
}
- sam3_sprintf( pChip, "%s\n", cp );
+ sam3_sprintf(pChip, "%s\n", cp );
- v = sam3_reg_fieldname( pChip, "NVPTYP", pChip->cfg.CHIPID_CIDR, 28, 3 );
- sam3_sprintf( pChip, "%s\n", nvptype[ v ] );
+ v = sam3_reg_fieldname(pChip, "NVPTYP", pChip->cfg.CHIPID_CIDR, 28, 3 );
+ sam3_sprintf(pChip, "%s\n", nvptype[ v ] );
- v = sam3_reg_fieldname( pChip, "EXTID", pChip->cfg.CHIPID_CIDR, 31, 1 );
+ v = sam3_reg_fieldname(pChip, "EXTID", pChip->cfg.CHIPID_CIDR, 31, 1 );
sam3_sprintf(pChip, "(exists: %s)\n", _yes_or_no(v));
}
static void
-sam3_explain_ckgr_mcfr( struct sam3_chip *pChip )
+sam3_explain_ckgr_mcfr(struct sam3_chip *pChip )
{
uint32_t v;
- v = sam3_reg_fieldname( pChip, "MAINFRDY", pChip->cfg.CKGR_MCFR, 16, 1 );
- sam3_sprintf( pChip, "(main ready: %s)\n", _yes_or_no( v ));
+ v = sam3_reg_fieldname(pChip, "MAINFRDY", pChip->cfg.CKGR_MCFR, 16, 1 );
+ sam3_sprintf(pChip, "(main ready: %s)\n", _yes_or_no(v ));
- v = sam3_reg_fieldname( pChip, "MAINF", pChip->cfg.CKGR_MCFR, 0, 16 );
+ v = sam3_reg_fieldname(pChip, "MAINF", pChip->cfg.CKGR_MCFR, 0, 16 );
v = (v * pChip->cfg.slow_freq) / 16;
pChip->cfg.mainosc_freq = v;
sam3_sprintf(pChip, "(%3.03f Mhz (%d.%03dkhz slowclk)\n",
- _tomhz( v ),
+ _tomhz(v ),
pChip->cfg.slow_freq / 1000,
pChip->cfg.slow_freq % 1000);
}
static void
-sam3_explain_ckgr_plla( struct sam3_chip *pChip )
+sam3_explain_ckgr_plla(struct sam3_chip *pChip )
{
uint32_t mula,diva;
- diva = sam3_reg_fieldname( pChip, "DIVA", pChip->cfg.CKGR_PLLAR, 0, 8 );
+ diva = sam3_reg_fieldname(pChip, "DIVA", pChip->cfg.CKGR_PLLAR, 0, 8 );
sam3_sprintf(pChip,"\n");
- mula = sam3_reg_fieldname( pChip, "MULA", pChip->cfg.CKGR_PLLAR, 16, 11 );
+ mula = sam3_reg_fieldname(pChip, "MULA", pChip->cfg.CKGR_PLLAR, 16, 11 );
sam3_sprintf(pChip,"\n");
pChip->cfg.plla_freq = 0;
- if ( mula == 0 ){
+ if (mula == 0 ){
sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,mula = 0)\n");
- } else if ( diva == 0 ){
+ } else if (diva == 0 ){
sam3_sprintf(pChip,"\tPLLA Freq: (Disabled,diva = 0)\n");
- } else if ( diva == 1 ){
+ } else if (diva == 1 ){
pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula + 1));
sam3_sprintf(pChip,"\tPLLA Freq: %3.03f MHz\n",
- _tomhz( pChip->cfg.plla_freq ));
+ _tomhz(pChip->cfg.plla_freq ));
}
}
static void
-sam3_explain_mckr( struct sam3_chip *pChip )
+sam3_explain_mckr(struct sam3_chip *pChip )
{
uint32_t css, pres,fin;
int pdiv;
const char *cp;
- css = sam3_reg_fieldname( pChip, "CSS", pChip->cfg.PMC_MCKR, 0, 2 );
- switch ( css & 3 ){
+ css = sam3_reg_fieldname(pChip, "CSS", pChip->cfg.PMC_MCKR, 0, 2 );
+ switch (css & 3 ){
case 0:
fin = pChip->cfg.slow_freq;
cp = "slowclk";
cp = "plla";
break;
case 3:
- if ( pChip->cfg.CKGR_UCKR & (1 << 16) ){
+ if (pChip->cfg.CKGR_UCKR & (1 << 16) ){
fin = 480 * 1000 * 1000;
cp = "upll";
} else {
break;
}
- sam3_sprintf( pChip, "%s (%3.03f Mhz)\n",
+ sam3_sprintf(pChip, "%s (%3.03f Mhz)\n",
cp,
- _tomhz( fin ) );
+ _tomhz(fin ) );
pres = sam3_reg_fieldname(pChip, "PRES", pChip->cfg.PMC_MCKR, 4, 3 );
- switch ( pres & 0x07 ){
+ switch (pres & 0x07 ){
case 0:
pdiv = 1;
cp = "selected clock";
cp = "clock/6";
break;
}
- sam3_sprintf( pChip, "(%s)\n", cp );
+ sam3_sprintf(pChip, "(%s)\n", cp );
fin = fin / pdiv;
// sam3 has a *SINGLE* clock -
// other at91 series parts have divisors for these.
pChip->cfg.cpu_freq = fin;
pChip->cfg.mclk_freq = fin;
pChip->cfg.fclk_freq = fin;
- sam3_sprintf( pChip, "\t\tResult CPU Freq: %3.03f\n",
- _tomhz( fin ) );
+ sam3_sprintf(pChip, "\t\tResult CPU Freq: %3.03f\n",
+ _tomhz(fin ) );
}
#if 0
static struct sam3_chip *
-target2sam3( target_t *pTarget )
+target2sam3(target_t *pTarget )
{
struct sam3_chip *pChip;
#endif
static uint32_t *
-sam3_get_reg_ptr( struct sam3_cfg *pCfg, const struct sam3_reg_list *pList )
+sam3_get_reg_ptr(struct sam3_cfg *pCfg, const struct sam3_reg_list *pList )
{
// this function exists to help
// keep funky offsetof() errors
// By using prototypes - we can detect what would
// be casting errors.
- return ((uint32_t *)( ((char *)(pCfg)) + pList->struct_offset ));
+ return ((uint32_t *)(((char *)(pCfg)) + pList->struct_offset ));
}
-#define SAM3_ENTRY( NAME, FUNC ) { .address = SAM3_ ## NAME, .struct_offset = offsetof( struct sam3_cfg, NAME ), #NAME, FUNC }
+#define SAM3_ENTRY(NAME, FUNC ) { .address = SAM3_ ## NAME, .struct_offset = offsetof(struct sam3_cfg, NAME ), #NAME, FUNC }
static const struct sam3_reg_list sam3_all_regs[] = {
- SAM3_ENTRY( CKGR_MOR , sam3_explain_ckgr_mor ),
- SAM3_ENTRY( CKGR_MCFR , sam3_explain_ckgr_mcfr ),
- SAM3_ENTRY( CKGR_PLLAR , sam3_explain_ckgr_plla ),
- SAM3_ENTRY( CKGR_UCKR , NULL ),
- SAM3_ENTRY( PMC_FSMR , NULL ),
- SAM3_ENTRY( PMC_FSPR , NULL ),
- SAM3_ENTRY( PMC_IMR , NULL ),
- SAM3_ENTRY( PMC_MCKR , sam3_explain_mckr ),
- SAM3_ENTRY( PMC_PCK0 , NULL ),
- SAM3_ENTRY( PMC_PCK1 , NULL ),
- SAM3_ENTRY( PMC_PCK2 , NULL ),
- SAM3_ENTRY( PMC_PCSR , NULL ),
- SAM3_ENTRY( PMC_SCSR , NULL ),
- SAM3_ENTRY( PMC_SR , NULL ),
- SAM3_ENTRY( CHIPID_CIDR , sam3_explain_chipid_cidr ),
- SAM3_ENTRY( CHIPID_EXID , NULL ),
- SAM3_ENTRY( SUPC_CR, NULL ),
+ SAM3_ENTRY(CKGR_MOR , sam3_explain_ckgr_mor ),
+ SAM3_ENTRY(CKGR_MCFR , sam3_explain_ckgr_mcfr ),
+ SAM3_ENTRY(CKGR_PLLAR , sam3_explain_ckgr_plla ),
+ SAM3_ENTRY(CKGR_UCKR , NULL ),
+ SAM3_ENTRY(PMC_FSMR , NULL ),
+ SAM3_ENTRY(PMC_FSPR , NULL ),
+ SAM3_ENTRY(PMC_IMR , NULL ),
+ SAM3_ENTRY(PMC_MCKR , sam3_explain_mckr ),
+ SAM3_ENTRY(PMC_PCK0 , NULL ),
+ SAM3_ENTRY(PMC_PCK1 , NULL ),
+ SAM3_ENTRY(PMC_PCK2 , NULL ),
+ SAM3_ENTRY(PMC_PCSR , NULL ),
+ SAM3_ENTRY(PMC_SCSR , NULL ),
+ SAM3_ENTRY(PMC_SR , NULL ),
+ SAM3_ENTRY(CHIPID_CIDR , sam3_explain_chipid_cidr ),
+ SAM3_ENTRY(CHIPID_EXID , NULL ),
+ SAM3_ENTRY(SUPC_CR, NULL ),
// TERMINATE THE LIST
{ .name = NULL }
static struct sam3_bank_private *
-get_sam3_bank_private( flash_bank_t *bank )
+get_sam3_bank_private(flash_bank_t *bank )
{
return (struct sam3_bank_private *)(bank->driver_priv);
}
* Determine the register name, address from the all registers table.
*/
static const struct sam3_reg_list *
-sam3_GetReg( struct sam3_chip *pChip, uint32_t *goes_here )
+sam3_GetReg(struct sam3_chip *pChip, uint32_t *goes_here )
{
const struct sam3_reg_list *pReg;
// calculate where this one go..
// it is "possibly" this register.
- pPossible = ((uint32_t *)( ((char *)(&(pChip->cfg))) + pReg->struct_offset ));
+ pPossible = ((uint32_t *)(((char *)(&(pChip->cfg))) + pReg->struct_offset ));
// well? Is it this register
- if ( pPossible == goes_here ){
+ if (pPossible == goes_here ){
// Jump for joy!
return pReg;
}
static int
-sam3_ReadThisReg( struct sam3_chip *pChip, uint32_t *goes_here )
+sam3_ReadThisReg(struct sam3_chip *pChip, uint32_t *goes_here )
{
const struct sam3_reg_list *pReg;
int r;
- pReg = sam3_GetReg( pChip, goes_here );
- if ( !pReg ){
+ pReg = sam3_GetReg(pChip, goes_here );
+ if (!pReg ){
return ERROR_FAIL;
}
- r = target_read_u32( pChip->target, pReg->address, goes_here );
- if ( r != ERROR_OK ){
+ r = target_read_u32(pChip->target, pReg->address, goes_here );
+ if (r != ERROR_OK ){
LOG_ERROR("Cannot read SAM3 register: %s @ 0x%08x, Err: %d\n",
pReg->name, (unsigned)(pReg->address), r );
}
static int
-sam3_ReadAllRegs( struct sam3_chip *pChip )
+sam3_ReadAllRegs(struct sam3_chip *pChip )
{
int r;
const struct sam3_reg_list *pReg;
pReg = &(sam3_all_regs[0]);
- while ( pReg->name ){
- r = sam3_ReadThisReg( pChip,
- sam3_get_reg_ptr( &(pChip->cfg), pReg ) );
- if ( r != ERROR_OK ){
+ while (pReg->name ){
+ r = sam3_ReadThisReg(pChip,
+ sam3_get_reg_ptr(&(pChip->cfg), pReg ) );
+ if (r != ERROR_OK ){
LOG_ERROR("Cannot read SAM3 registere: %s @ 0x%08x, Error: %d\n",
pReg->name, ((unsigned)(pReg->address)), r );
return r;
static int
-sam3_GetInfo( struct sam3_chip *pChip )
+sam3_GetInfo(struct sam3_chip *pChip )
{
const struct sam3_reg_list *pReg;
uint32_t regval;
- membuf_reset( pChip->mbuf );
+ membuf_reset(pChip->mbuf );
pReg = &(sam3_all_regs[0]);
while (pReg->name){
// display all regs
LOG_DEBUG("Start: %s", pReg->name );
- regval = *sam3_get_reg_ptr( &(pChip->cfg), pReg );
+ regval = *sam3_get_reg_ptr(&(pChip->cfg), pReg );
sam3_sprintf(pChip, "%*s: [0x%08x] -> 0x%08x\n",
REG_NAME_WIDTH,
pReg->name,
pReg->address,
regval );
- if ( pReg->explain_func ){
- (*(pReg->explain_func))( pChip );
+ if (pReg->explain_func ){
+ (*(pReg->explain_func))(pChip );
}
LOG_DEBUG("End: %s", pReg->name );
pReg++;
}
- sam3_sprintf(pChip," rc-osc: %3.03f MHz\n", _tomhz( pChip->cfg.rc_freq ));
- sam3_sprintf(pChip," mainosc: %3.03f MHz\n", _tomhz( pChip->cfg.mainosc_freq ));
- sam3_sprintf(pChip," plla: %3.03f MHz\n", _tomhz( pChip->cfg.plla_freq ));
- sam3_sprintf(pChip," cpu-freq: %3.03f MHz\n", _tomhz( pChip->cfg.cpu_freq ));
- sam3_sprintf(pChip,"mclk-freq: %3.03f MHz\n", _tomhz( pChip->cfg.mclk_freq ));
+ sam3_sprintf(pChip," rc-osc: %3.03f MHz\n", _tomhz(pChip->cfg.rc_freq ));
+ sam3_sprintf(pChip," mainosc: %3.03f MHz\n", _tomhz(pChip->cfg.mainosc_freq ));
+ sam3_sprintf(pChip," plla: %3.03f MHz\n", _tomhz(pChip->cfg.plla_freq ));
+ sam3_sprintf(pChip," cpu-freq: %3.03f MHz\n", _tomhz(pChip->cfg.cpu_freq ));
+ sam3_sprintf(pChip,"mclk-freq: %3.03f MHz\n", _tomhz(pChip->cfg.mclk_freq ));
- sam3_sprintf( pChip, " UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ sam3_sprintf(pChip, " UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x\n",
pChip->cfg.unique_id[0],
pChip->cfg.unique_id[1],
pChip->cfg.unique_id[2],
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if ( 0 == bank->num_sectors ){
+ if (0 == bank->num_sectors ){
LOG_ERROR("Target: not supported/not probed\n");
return ERROR_FAIL;
}
LOG_INFO("sam3 - supports auto-erase, erase_check ignored");
- for ( x = 0 ; x < bank->num_sectors ; x++ ){
+ for (x = 0 ; x < bank->num_sectors ; x++ ){
bank->sectors[x].is_erased = 1;
}
}
pPrivate = get_sam3_bank_private(bank);
- if ( !pPrivate ){
+ if (!pPrivate ){
LOG_ERROR("no private for this bank?");
return ERROR_FAIL;
}
- if ( !(pPrivate->probed) ){
+ if (!(pPrivate->probed) ){
return ERROR_FLASH_BANK_NOT_PROBED;
}
- r = FLASHD_GetLockBits( pPrivate , &v );
- if ( r != ERROR_OK ){
+ r = FLASHD_GetLockBits(pPrivate , &v );
+ if (r != ERROR_OK ){
LOG_DEBUG("Failed: %d",r);
return r;
}
- for ( x = 0 ; x < pPrivate->nsectors ; x++ ){
+ for (x = 0 ; x < pPrivate->nsectors ; x++ ){
bank->sectors[x].is_protected = (!!(v & (1 << x)));
}
LOG_DEBUG("Done");
// is this an existing chip?
while (pChip){
- if ( pChip->target == bank->target ){
+ if (pChip->target == bank->target ){
break;
}
pChip = pChip->next;
}
- if ( !pChip ){
+ if (!pChip ){
// this is a *NEW* chip
- pChip = calloc( 1, sizeof(struct sam3_chip) );
- if ( !pChip ){
+ pChip = calloc(1, sizeof(struct sam3_chip) );
+ if (!pChip ){
LOG_ERROR("NO RAM!");
return ERROR_FAIL;
}
pChip->cfg.slow_freq = 32768;
pChip->probed = 0;
pChip->mbuf = membuf_new();
- if ( !(pChip->mbuf) ){
+ if (!(pChip->mbuf) ){
LOG_ERROR("no memory");
return ERROR_FAIL;
}
}
- switch ( bank->base ){
+ switch (bank->base ){
default:
LOG_ERROR("Address 0x%08x invalid bank address (try 0x%08x or 0x%08x)",
((unsigned int)(bank->base)),
}
static int
-sam3_GetDetails( struct sam3_bank_private *pPrivate )
+sam3_GetDetails(struct sam3_bank_private *pPrivate )
{
const struct sam3_chip_details *pDetails;
struct sam3_chip *pChip;
LOG_DEBUG("Begin");
pDetails = all_sam3_details;
- while ( pDetails->name ){
- if ( pDetails->chipid_cidr == pPrivate->pChip->cfg.CHIPID_CIDR ){
+ while (pDetails->name ){
+ if (pDetails->chipid_cidr == pPrivate->pChip->cfg.CHIPID_CIDR ){
break;
} else {
pDetails++;
}
}
- if ( pDetails->name == NULL ){
+ if (pDetails->name == NULL ){
LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can this chip?)",
(unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR) );
// Help the victim, print details about the chip
- membuf_reset( pPrivate->pChip->mbuf );
- membuf_sprintf( pPrivate->pChip->mbuf,
+ membuf_reset(pPrivate->pChip->mbuf );
+ membuf_sprintf(pPrivate->pChip->mbuf,
"SAM3 CHIPID_CIDR: 0x%08x decodes as follows\n",
pPrivate->pChip->cfg.CHIPID_CIDR );
- sam3_explain_chipid_cidr( pPrivate->pChip );
- cp = membuf_strtok( pPrivate->pChip->mbuf, "\n", &vp );
+ sam3_explain_chipid_cidr(pPrivate->pChip );
+ cp = membuf_strtok(pPrivate->pChip->mbuf, "\n", &vp );
while (cp){
LOG_INFO("%s", cp );
- cp = membuf_strtok( NULL, "\n", &vp );
+ cp = membuf_strtok(NULL, "\n", &vp );
}
return ERROR_FAIL;
}
//
// save the "bank" pointers
- for ( x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
+ for (x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
saved_banks[ x ] = pChip->details.bank[x].pBank;
}
// Overwrite the "details" structure.
- memcpy( &(pPrivate->pChip->details),
+ memcpy(&(pPrivate->pChip->details),
pDetails,
sizeof(pPrivate->pChip->details));
// now fix the ghosted pointers
- for ( x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
+ for (x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
pChip->details.bank[x].pChip = pChip;
pChip->details.bank[x].pBank = saved_banks[x];
}
return ERROR_TARGET_NOT_HALTED;
}
- pPrivate = get_sam3_bank_private( bank );
- if ( !pPrivate ){
+ pPrivate = get_sam3_bank_private(bank );
+ if (!pPrivate ){
LOG_ERROR("Invalid/unknown bank number\n");
return ERROR_FAIL;
}
r = sam3_ReadAllRegs(pPrivate->pChip);
- if ( r != ERROR_OK ){
+ if (r != ERROR_OK ){
return r;
}
LOG_DEBUG("Here");
- r = sam3_GetInfo( pPrivate->pChip );
- if ( r != ERROR_OK ){
+ r = sam3_GetInfo(pPrivate->pChip );
+ if (r != ERROR_OK ){
return r;
}
- if ( !(pPrivate->pChip->probed) ){
+ if (!(pPrivate->pChip->probed) ){
pPrivate->pChip->probed = 1;
LOG_DEBUG("Here");
- r = sam3_GetDetails( pPrivate );
- if ( r != ERROR_OK ){
+ r = sam3_GetDetails(pPrivate );
+ if (r != ERROR_OK ){
return r;
}
}
// update the flash bank size
- for ( x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
- if ( bank->base == pPrivate->pChip->details.bank[0].base_address ){
+ for (x = 0 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
+ if (bank->base == pPrivate->pChip->details.bank[0].base_address ){
bank->size = pPrivate->pChip->details.bank[0].size_bytes;
break;
}
}
- if ( bank->sectors == NULL ){
- bank->sectors = calloc(pPrivate->nsectors, (sizeof( (bank->sectors)[0] )));
- if ( bank->sectors == NULL ){
+ if (bank->sectors == NULL ){
+ bank->sectors = calloc(pPrivate->nsectors, (sizeof((bank->sectors)[0] )));
+ if (bank->sectors == NULL ){
LOG_ERROR("No memory!");
return ERROR_FAIL;
}
bank->num_sectors = pPrivate->nsectors;
- for ( x = 0 ; ((int)(x)) < bank->num_sectors ; x++ ){
+ for (x = 0 ; ((int)(x)) < bank->num_sectors ; x++ ){
bank->sectors[x].size = pPrivate->sector_size;
bank->sectors[x].offset = x * (pPrivate->sector_size);
// mark as unknown
pPrivate->probed = 1;
- r = sam3_protect_check( bank );
- if ( r != ERROR_OK ){
+ r = sam3_protect_check(bank );
+ if (r != ERROR_OK ){
return r;
}
LOG_DEBUG("Bank = %d, nbanks = %d",
pPrivate->bank_number , pPrivate->pChip->details.n_banks);
- if ( (pPrivate->bank_number + 1) == pPrivate->pChip->details.n_banks ){
+ if ((pPrivate->bank_number + 1) == pPrivate->pChip->details.n_banks ){
// read unique id,
// it appears to be associated with the *last* flash bank.
FLASHD_ReadUniqueID(pPrivate);
static int
sam3_probe(struct flash_bank_s *bank)
{
- return _sam3_probe( bank, 1 );
+ return _sam3_probe(bank, 1 );
}
static int
sam3_auto_probe(struct flash_bank_s *bank)
{
- return _sam3_probe( bank, 0 );
+ return _sam3_probe(bank, 0 );
}
return ERROR_TARGET_NOT_HALTED;
}
- r = sam3_auto_probe( bank );
- if ( r != ERROR_OK ){
+ r = sam3_auto_probe(bank );
+ if (r != ERROR_OK ){
LOG_DEBUG("Here,r=%d",r);
return r;
}
- pPrivate = get_sam3_bank_private( bank );
- if ( !(pPrivate->probed) ){
+ pPrivate = get_sam3_bank_private(bank );
+ if (!(pPrivate->probed) ){
return ERROR_FLASH_BANK_NOT_PROBED;
}
- if ( (first == 0) && ((last + 1)== ((int)(pPrivate->nsectors))) ){
+ if ((first == 0) && ((last + 1)== ((int)(pPrivate->nsectors))) ){
// whole chip
LOG_DEBUG("Here");
- return FLASHD_EraseEntireBank( pPrivate );
+ return FLASHD_EraseEntireBank(pPrivate );
}
LOG_INFO("sam3 auto-erases while programing (request ignored)");
return ERROR_OK;
return ERROR_TARGET_NOT_HALTED;
}
- pPrivate = get_sam3_bank_private( bank );
- if ( !(pPrivate->probed) ){
+ pPrivate = get_sam3_bank_private(bank );
+ if (!(pPrivate->probed) ){
return ERROR_FLASH_BANK_NOT_PROBED;
}
- if ( set ){
- r = FLASHD_Lock( pPrivate, (unsigned)(first), (unsigned)(last));
+ if (set ){
+ r = FLASHD_Lock(pPrivate, (unsigned)(first), (unsigned)(last));
} else {
- r = FLASHD_Unlock( pPrivate, (unsigned)(first), (unsigned)(last));
+ r = FLASHD_Unlock(pPrivate, (unsigned)(first), (unsigned)(last));
}
LOG_DEBUG("End: r=%d",r);
static int
-sam3_info( flash_bank_t *bank, char *buf, int buf_size )
+sam3_info(flash_bank_t *bank, char *buf, int buf_size )
{
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
}
static int
-sam3_page_read( struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf )
+sam3_page_read(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf )
{
uint32_t adr;
int r;
adr = pagenum * pPrivate->page_size;
adr += adr + pPrivate->base_address;
- r = target_read_memory( pPrivate->pChip->target,
+ r = target_read_memory(pPrivate->pChip->target,
adr,
4, /* THIS*MUST*BE* in 32bit values */
pPrivate->page_size / 4,
buf );
- if ( r != ERROR_OK ){
+ if (r != ERROR_OK ){
LOG_ERROR("SAM3: Flash program failed to read page phys address: 0x%08x", (unsigned int)(adr) );
}
return r;
// };
//
//
-// uint32_t sam3_function( struct foo *p )
+// uint32_t sam3_function(struct foo *p )
// {
// volatile uint32_t *v;
// uint32_t *d;
//
// do {
// *d++ = *s++;
-// } while ( --n )
+// } while (--n )
// ;
//
// v = p->base;
// v[ 1 ] = p->cmd;
// do {
// r = v[8/4];
-// } while ( !(r&1) )
+// } while (!(r&1) )
// ;
// return r;
// }
static int
-sam3_page_write( struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf )
+sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf )
{
uint32_t adr;
uint32_t status;
adr += (adr + pPrivate->base_address);
LOG_DEBUG("Wr Page %u @ phys address: 0x%08x", pagenum, (unsigned int)(adr) );
- r = target_write_memory( pPrivate->pChip->target,
+ r = target_write_memory(pPrivate->pChip->target,
adr,
4, /* THIS*MUST*BE* in 32bit values */
pPrivate->page_size / 4,
buf );
- if ( r != ERROR_OK ){
+ if (r != ERROR_OK ){
LOG_ERROR("SAM3: Failed to write (buffer) page at phys address 0x%08x", (unsigned int)(adr) );
return r;
}
- r = EFC_PerformCommand( pPrivate,
+ r = EFC_PerformCommand(pPrivate,
// send Erase & Write Page
AT91C_EFC_FCMD_EWP,
pagenum,
&status );
- if ( r != ERROR_OK ){
+ if (r != ERROR_OK ){
LOG_ERROR("SAM3: Error performing Erase & Write page @ phys address 0x%08x", (unsigned int)(adr) );
}
- if ( status & (1 << 2) ){
+ if (status & (1 << 2) ){
LOG_ERROR("SAM3: Page @ Phys address 0x%08x is locked", (unsigned int)(adr) );
return ERROR_FAIL;
}
- if ( status & (1 << 1) ){
+ if (status & (1 << 1) ){
LOG_ERROR("SAM3: Flash Command error @phys address 0x%08x", (unsigned int)(adr) );
return ERROR_FAIL;
}
uint8_t *pagebuffer;
// ignore dumb requests
- if ( count == 0 ){
+ if (count == 0 ){
return ERROR_OK;
}
}
pPrivate = get_sam3_bank_private(bank);
- if ( !(pPrivate->probed) ){
+ if (!(pPrivate->probed) ){
return ERROR_FLASH_BANK_NOT_PROBED;
}
- if ( (offset + count) > pPrivate->size_bytes ){
+ if ((offset + count) > pPrivate->size_bytes ){
LOG_ERROR("Flash write error - past end of bank");
LOG_ERROR(" offset: 0x%08x, count 0x%08x, BankEnd: 0x%08x",
(unsigned int)(offset),
return ERROR_FAIL;
}
- pagebuffer = alloca( pPrivate->page_size );
+ pagebuffer = alloca(pPrivate->page_size );
// what page do we start & end in?
page_cur = offset / pPrivate->page_size;
// (3) non-aligned end.
// Handle special case - all one page.
- if ( page_cur == page_end ){
+ if (page_cur == page_end ){
LOG_DEBUG("Special case, all in one page");
- r = sam3_page_read( pPrivate, page_cur, pagebuffer );
- if ( r != ERROR_OK ){
+ r = sam3_page_read(pPrivate, page_cur, pagebuffer );
+ if (r != ERROR_OK ){
return r;
}
page_offset = (offset & (pPrivate->page_size-1));
- memcpy( pagebuffer + page_offset,
+ memcpy(pagebuffer + page_offset,
buffer,
count );
- r = sam3_page_write( pPrivate, page_cur, pagebuffer );
- if ( r != ERROR_OK ){
+ r = sam3_page_write(pPrivate, page_cur, pagebuffer );
+ if (r != ERROR_OK ){
return r;
}
return ERROR_OK;
// non-aligned start
page_offset = offset & (pPrivate->page_size - 1);
- if ( page_offset ){
+ if (page_offset ){
LOG_DEBUG("Not-Aligned start");
// read the partial
- r = sam3_page_read( pPrivate, page_cur, pagebuffer );
- if ( r != ERROR_OK ){
+ r = sam3_page_read(pPrivate, page_cur, pagebuffer );
+ if (r != ERROR_OK ){
return r;
}
// over-write with new data
n = (pPrivate->page_size - page_offset );
- memcpy( pagebuffer + page_offset,
+ memcpy(pagebuffer + page_offset,
buffer,
n );
- r = sam3_page_write( pPrivate, page_cur, pagebuffer );
- if ( r != ERROR_OK ){
+ r = sam3_page_write(pPrivate, page_cur, pagebuffer );
+ if (r != ERROR_OK ){
return r;
}
LOG_DEBUG("Full Page Loop: cur=%d, end=%d, count = 0x%08x",
(int)page_cur, (int)page_end, (unsigned int)(count) );
- while ( (page_cur < page_end) &&
+ while ((page_cur < page_end) &&
(count >= pPrivate->page_size) ){
- r = sam3_page_write( pPrivate, page_cur, buffer );
- if ( r != ERROR_OK ){
+ r = sam3_page_write(pPrivate, page_cur, buffer );
+ if (r != ERROR_OK ){
return r;
}
count -= pPrivate->page_size;
}
// terminal partial page?
- if ( count ){
+ if (count ){
LOG_DEBUG("Terminal partial page, count = 0x%08x", (unsigned int)(count));
// we have a partial page
- r = sam3_page_read( pPrivate, page_cur, pagebuffer );
- if ( r != ERROR_OK ){
+ r = sam3_page_read(pPrivate, page_cur, pagebuffer );
+ if (r != ERROR_OK ){
return r;
}
// data goes at start
- memcpy( pagebuffer, buffer, count );
- r = sam3_page_write( pPrivate, page_cur, pagebuffer );
- if ( r != ERROR_OK ){
+ memcpy(pagebuffer, buffer, count );
+ r = sam3_page_write(pPrivate, page_cur, pagebuffer );
+ if (r != ERROR_OK ){
return r;
}
buffer += count;
}
static int
-sam3_handle_info_command( struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc )
+sam3_handle_info_command(struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc )
{
struct sam3_chip *pChip;
void *vp;
int r;
pChip = get_current_sam3(cmd_ctx);
- if ( !pChip ){
+ if (!pChip ){
return ERROR_OK;
}
r = 0;
// bank0 must exist before we can do anything
- if ( pChip->details.bank[0].pBank == NULL ){
+ if (pChip->details.bank[0].pBank == NULL ){
x = 0;
need_define:
- command_print( cmd_ctx,
+ command_print(cmd_ctx,
"Please define bank %d via command: flash bank %s ... ",
x,
at91sam3_flash.name );
}
// if bank 0 is not probed, then probe it
- if ( !(pChip->details.bank[0].probed) ){
- r = sam3_auto_probe( pChip->details.bank[0].pBank );
- if ( r != ERROR_OK ){
+ if (!(pChip->details.bank[0].probed) ){
+ r = sam3_auto_probe(pChip->details.bank[0].pBank );
+ if (r != ERROR_OK ){
return ERROR_FAIL;
}
}
// auto-probe other banks, 0 done above
- for ( x = 1 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
+ for (x = 1 ; x < SAM3_MAX_FLASH_BANKS ; x++ ){
// skip banks not present
- if ( !(pChip->details.bank[x].present) ){
+ if (!(pChip->details.bank[x].present) ){
continue;
}
- if ( pChip->details.bank[x].pBank == NULL ){
+ if (pChip->details.bank[x].pBank == NULL ){
goto need_define;
}
- if ( pChip->details.bank[x].probed ){
+ if (pChip->details.bank[x].probed ){
continue;
}
- r = sam3_auto_probe( pChip->details.bank[x].pBank );
- if ( r != ERROR_OK ){
+ r = sam3_auto_probe(pChip->details.bank[x].pBank );
+ if (r != ERROR_OK ){
return r;
}
}
- r = sam3_GetInfo( pChip );
- if ( r != ERROR_OK ){
+ r = sam3_GetInfo(pChip );
+ if (r != ERROR_OK ){
LOG_DEBUG("Sam3Info, Failed %d\n",r);
return r;
}
// print results
- cp = membuf_strtok( pChip->mbuf, "\n", &vp );
+ cp = membuf_strtok(pChip->mbuf, "\n", &vp );
while (cp){
command_print(cmd_ctx,"%s", cp );
- cp = membuf_strtok( NULL, "\n", &vp );
+ cp = membuf_strtok(NULL, "\n", &vp );
}
return ERROR_OK;
}
static int
-sam3_handle_gpnvm_command( struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc)
+sam3_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc)
{
unsigned x,v;
uint32_t v32;
struct sam3_chip *pChip;
pChip = get_current_sam3(cmd_ctx);
- if ( !pChip ){
+ if (!pChip ){
return ERROR_OK;
}
- if ( pChip->target->state != TARGET_HALTED ){
+ if (pChip->target->state != TARGET_HALTED ){
LOG_ERROR("sam3 - target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if ( pChip->details.bank[0].pBank == NULL ){
- command_print( cmd_ctx, "Bank0 must be defined first via: flash bank %s ...",
+ if (pChip->details.bank[0].pBank == NULL ){
+ command_print(cmd_ctx, "Bank0 must be defined first via: flash bank %s ...",
at91sam3_flash.name );
return ERROR_FAIL;
}
- if ( !pChip->details.bank[0].probed ){
- r = sam3_auto_probe( pChip->details.bank[0].pBank );
- if ( r != ERROR_OK ){
+ if (!pChip->details.bank[0].probed ){
+ r = sam3_auto_probe(pChip->details.bank[0].pBank );
+ if (r != ERROR_OK ){
return r;
}
}
- switch ( argc ){
+ switch (argc ){
default:
command_print(cmd_ctx,"Too many parameters\n");
return ERROR_COMMAND_SYNTAX_ERROR;
who = -1;
break;
case 2:
- if ( (0 == strcmp( argv[0], "show" )) && (0 == strcmp( argv[1], "all" )) ){
+ if ((0 == strcmp(argv[0], "show" )) && (0 == strcmp(argv[1], "all" )) ){
who = -1;
} else {
- r = parse_u32( argv[1], &v32 );
- if ( r != ERROR_OK ){
- command_print( cmd_ctx, "Not a number: %s", argv[1] );
+ r = parse_u32(argv[1], &v32 );
+ if (r != ERROR_OK ){
+ command_print(cmd_ctx, "Not a number: %s", argv[1] );
return r;
}
who = v32;
break;
}
- if ( 0 == strcmp( "show", argv[0] ) ){
- if ( who == -1 ){
+ if (0 == strcmp("show", argv[0] ) ){
+ if (who == -1 ){
showall:
- for ( x = 0 ; x < pChip->details.n_gpnvms ; x++ ){
- r = FLASHD_GetGPNVM( &(pChip->details.bank[0]), x, &v );
- if ( r != ERROR_OK ){
+ for (x = 0 ; x < pChip->details.n_gpnvms ; x++ ){
+ r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), x, &v );
+ if (r != ERROR_OK ){
break;
}
command_print(cmd_ctx, "sam3-gpnvm%u: %u", x, v );
}
return r;
}
- if ( (who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms) ){
- r = FLASHD_GetGPNVM( &(pChip->details.bank[0]), who, &v );
+ if ((who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms) ){
+ r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), who, &v );
command_print(cmd_ctx, "sam3-gpnvm%u: %u", who, v );
return r;
} else {
}
}
- if ( who == -1 ){
- command_print( cmd_ctx, "Missing GPNVM number");
+ if (who == -1 ){
+ command_print(cmd_ctx, "Missing GPNVM number");
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if ( 0 == strcmp( "set", argv[0] ) ){
- r = FLASHD_SetGPNVM( &(pChip->details.bank[0]), who );
- } else if ( (0 == strcmp( "clr", argv[0] )) ||
- (0 == strcmp( "clear", argv[0])) ){ // quietly accept both
- r = FLASHD_ClrGPNVM( &(pChip->details.bank[0]), who );
+ if (0 == strcmp("set", argv[0] ) ){
+ r = FLASHD_SetGPNVM(&(pChip->details.bank[0]), who );
+ } else if ((0 == strcmp("clr", argv[0] )) ||
+ (0 == strcmp("clear", argv[0])) ){ // quietly accept both
+ r = FLASHD_ClrGPNVM(&(pChip->details.bank[0]), who );
} else {
- command_print( cmd_ctx, "Unkown command: %s", argv[0] );
+ command_print(cmd_ctx, "Unkown command: %s", argv[0] );
r = ERROR_COMMAND_SYNTAX_ERROR;
}
return r;
}
static int
-sam3_handle_slowclk_command( struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc)
+sam3_handle_slowclk_command(struct command_context_s *cmd_ctx, char *cmd, char **argv, int argc)
{
uint32_t v;
int r;
struct sam3_chip *pChip;
pChip = get_current_sam3(cmd_ctx);
- if ( !pChip ){
+ if (!pChip ){
return ERROR_OK;
}
- switch ( argc ){
+ switch (argc ){
case 0:
// show
break;
case 1:
// set
- r = parse_u32( argv[0], &v );
- if ( v > 200000 ){
+ r = parse_u32(argv[0], &v );
+ if (v > 200000 ){
// absurd slow clock of 200Khz?
command_print(cmd_ctx,"Absurd/illegal slow clock freq: %d\n", (int)(v));
return ERROR_COMMAND_SYNTAX_ERROR;
default:
// error
- command_print( cmd_ctx,"Too many parameters");
+ command_print(cmd_ctx,"Too many parameters");
return ERROR_COMMAND_SYNTAX_ERROR;
break;
}
- command_print( cmd_ctx, "Slowclk freq: %d.%03dkhz",
+ command_print(cmd_ctx, "Slowclk freq: %d.%03dkhz",
(int)(pChip->cfg.slow_freq/ 1000),
(int)(pChip->cfg.slow_freq% 1000));
return ERROR_OK;
static int sam3_registered;
static int
-sam3_register_commands( struct command_context_s *cmd_ctx)
+sam3_register_commands(struct command_context_s *cmd_ctx)
{
command_t *pCmd;
// only register once
- if ( !sam3_registered ){
+ if (!sam3_registered ){
sam3_registered++;
- pCmd = register_command( cmd_ctx, NULL, "at91sam3", NULL, COMMAND_ANY, NULL );
- register_command( cmd_ctx, pCmd,
+ pCmd = register_command(cmd_ctx, NULL, "at91sam3", NULL, COMMAND_ANY, NULL );
+ register_command(cmd_ctx, pCmd,
"gpnvm",
sam3_handle_gpnvm_command,
COMMAND_EXEC,
"at91sam3 gpnvm [action [<BIT>], by default 'show', otherwise set | clear BIT");
- register_command( cmd_ctx, pCmd,
+ register_command(cmd_ctx, pCmd,
"info",
sam3_handle_info_command,
COMMAND_EXEC,
"at91sam3 info - print information about the current sam3 chip");
- register_command( cmd_ctx, pCmd,
+ register_command(cmd_ctx, pCmd,
"slowclk",
sam3_handle_slowclk_command,
COMMAND_EXEC,
projects / fw / openocd / commitdiff