AC_HELP_STRING([--with-fusb-tech=OS],
[Set fast USB technique (default=auto)]),
[cf_with_fusb_tech="$withval"],
- [cf_with_fusb_tech="$host_os"])
+ [cf_with_fusb_tech="libusb1"])
if test [x]$1 != xno; then
case "$cf_with_fusb_tech" in
+ libusb1*)
+ FUSB_TECH=libusb1
+ ;;
linux*)
AC_CHECK_HEADER([linux/usbdevice_fs.h],
[x_have_usbdevice_fs_h=yes],
AC_DEFUN([USRP_LIBUSB], [
libusbok=yes
- PKG_CHECK_MODULES(USB, libusb, [], [
- AC_LANG_PUSH(C)
+ PKG_CHECK_MODULES(USB, libusb-1.0, [have_libusb1=yes; libusbok=yes], [
+ PKG_CHECK_MODULES(USB, libusb, [have_libusb1=no; libusbok=yes], [libusbok=no])
+ ])
- AC_CHECK_HEADERS([usb.h], [], [libusbok=no; AC_MSG_RESULT([USRP requires libusb. usb.h not found. See http://libusb.sf.net])])
+ if test x$libusbok = xyes; then
+ if test x$have_libusb1 = xyes; then
+ AC_DEFINE(HAVE_LIBUSB_1, [1], [Define if libusb-1.0 found])
+ fi
+ AC_OUTPUT_COMMANDS([
+ case "$CONFIG_OTHER" in
+ usrp*)
+ outfile=usrp/host/include/usrp/$CONFIG_OTHER
+ tmpfile=${outfile}T
+ dirname="sed s,^.*/,,g"
+
+ echo creating $outfile
+ cat > $tmpfile << _EOF_
+/* -*- Mode: C++ -*-
+* --------------------------------------------------------------------
+* DO NOT EDIT THIS FILE! It has been automatically generated
+* from: configure.in and `echo $outfile|$dirname`.in
+* on host: `(hostname || uname -n) 2>/dev/null | sed 1q`
+* --------------------------------------------------------------------
+*/
- save_LIBS="$LIBS"
- case "$host_os" in
- darwin*)
- LIBS="$LIBS -lIOKit"
+_EOF_
+ echo "#ifndef _`echo $outfile | $dirname | tr a-z. A-Z_`_" >> $tmpfile
+ echo "#define _`echo $outfile | $dirname | tr a-z. A-Z_`_" >> $tmpfile
+ echo >> $tmpfile
+
+ case "$CONFIG_OTHER" in
+ usrp_prims*)
+ echo '#include <usrp/usrp_slots.h>' >> $tmpfile
+ echo '#include <string>' >> $tmpfile
+ echo >> $tmpfile
;;
- *) ;;
- esac
+ usrp_basic*)
+ echo '#include <usrp/db_base.h>' >> $tmpfile
+ echo '#include <usrp/usrp_slots.h>' >> $tmpfile
+ echo '#include <string>' >> $tmpfile
+ echo '#include <vector>' >> $tmpfile
+ echo '#include <boost/utility.hpp>' >> $tmpfile
+ echo '#include <usrp/usrp_subdev_spec.h>' >> $tmpfile
+ echo >> $tmpfile
+ ;;
+ esac
+
+ if test x$have_libusb1 = xno; then
+ echo 'struct usb_device;'>> $tmpfile
+ echo 'struct usb_dev_handle;'>> $tmpfile
+ echo 'typedef struct usb_device libusb_device;' >> $tmpfile
+ echo 'typedef struct usb_dev_handle libusb_device_handle;' >> $tmpfile
+ echo >> $tmpfile
+ fi
- AC_SEARCH_LIBS(usb_bulk_write, [usb], [USB_LIBS="$LIBS"], [libusbok=no; AC_MSG_RESULT([USRP requires libusb. usb_bulk_write not found. See http://libusb.sf.net])])
+ if test x$have_libusb1 = xyes; then
+ echo 'struct libusb_device;' >> $tmpfile
+ echo 'struct libusb_device_handle;' >> $tmpfile
+ echo >> $tmpfile
+ fi
- LIBS="$save_LIBS"
+ # The ugly but portable cpp stuff comes from here
+ infile=usrp/host/include/usrp/`echo $outfile | sed 's,.*/,,g;s,\..*$,,g'`.h.in
+ sed '/^##.*$/d' $infile >> $tmpfile
+ mv ${tmpfile} ${outfile}
+ ;;
+ esac
- AC_LANG_POP
- ])
+ ],[
+ have_libusb1=$have_libusb1
+ ])
- if test x$libusbok = xyes; then
AC_SUBST(USB_LIBS)
ifelse([$1], , :, [$1])
else
# Boston, MA 02110-1301, USA.
#
-SUBDIRS = misc lib include apps
+SUBDIRS = misc include lib apps
if PYTHON
SUBDIRS += swig
usrpincludedir = $(includedir)/usrp
+usrp_prims.h: usrp_prims.h.in $(top_srcdir)/config.status
+ cd $(top_srcdir) \
+ && CONFIG_FILES= CONFIG_HEADERS= CONFIG_OTHER=usrp_prims.h \
+ $(SHELL) ./config.status
+
+usrp_basic.h: usrp_basic.h.in $(top_srcdir)/config.status
+ cd $(top_srcdir) \
+ && CONFIG_FILES= CONFIG_HEADERS= CONFIG_OTHER=usrp_basic.h \
+ $(SHELL) ./config.status
+
usrpinclude_HEADERS = \
db_base.h \
db_basic.h \
+++ /dev/null
-/* -*- c++ -*- */
-/*
- * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc.
- *
- * This file is part of GNU Radio
- *
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- *
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING. If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
- * ----------------------------------------------------------------------
- * Mid level interface to the Universal Software Radio Peripheral (Rev 1)
- *
- * These classes implement the basic functionality for talking to the
- * USRP. They try to be as independent of the signal processing code
- * in FPGA as possible. They implement access to the low level
- * peripherals on the board, provide a common way for reading and
- * writing registers in the FPGA, and provide the high speed interface
- * to streaming data across the USB.
- *
- * It is expected that subclasses will be derived that provide
- * access to the functionality to a particular FPGA configuration.
- * ----------------------------------------------------------------------
- */
-
-#ifndef INCLUDED_USRP_BASIC_H
-#define INCLUDED_USRP_BASIC_H
-
-#include <usrp/db_base.h>
-#include <usrp/usrp_slots.h>
-#include <string>
-#include <vector>
-#include <boost/utility.hpp>
-#include <usrp/usrp_subdev_spec.h>
-
-#if 1
-struct usb_dev_handle;
-struct usb_device;
-typedef struct usb_dev_handle libusb_device_handle;
-typedef struct usb_device libusb_device;
-#else
-struct libusb_device_handle;
-#endif
-
-class fusb_devhandle;
-class fusb_ephandle;
-
-enum txrx_t {
- C_RX = 0,
- C_TX = 1
-};
-
-/*!
- * \brief abstract base class for usrp operations
- * \ingroup usrp
- */
-class usrp_basic : boost::noncopyable
-{
-protected:
- void shutdown_daughterboards();
-
-protected:
- libusb_device_handle *d_udh;
- struct libusb_context *d_ctx;
- int d_usb_data_rate; // bytes/sec
- int d_bytes_per_poll; // how often to poll for overruns
- bool d_verbose;
- long d_fpga_master_clock_freq;
-
- static const int MAX_REGS = 128;
- unsigned int d_fpga_shadows[MAX_REGS];
-
- int d_dbid[2]; // daughterboard ID's (side A, side B)
-
- /*!
- * Shared pointers to subclasses of db_base.
- *
- * The outer vector is of length 2 (0 = side A, 1 = side B). The
- * inner vectors are of length 1, 2 or 3 depending on the number of
- * subdevices implemented by the daugherboard. At this time, only
- * the Basic Rx and LF Rx implement more than 1 subdevice.
- */
- std::vector< std::vector<db_base_sptr> > d_db;
-
- //! One time call, made only only from usrp_standard_*::make after shared_ptr is created.
- void init_db(usrp_basic_sptr u);
-
-
- usrp_basic (int which_board,
- libusb_device_handle *open_interface (libusb_device *dev),
- const std::string fpga_filename = "",
- const std::string firmware_filename = "");
-
- /*!
- * \brief advise usrp_basic of usb data rate (bytes/sec)
- *
- * N.B., this doesn't tweak any hardware. Derived classes
- * should call this to inform us of the data rate whenever it's
- * first set or if it changes.
- *
- * \param usb_data_rate bytes/sec
- */
- void set_usb_data_rate (int usb_data_rate);
-
- /*!
- * \brief Write auxiliary digital to analog converter.
- *
- * \param slot Which Tx or Rx slot to write.
- * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's.
- * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's.
- * \param which_dac [0,3] RX slots must use only 0 and 1. TX slots must use only 2 and 3.
- * \param value [0,4095]
- * \returns true iff successful
- */
- bool _write_aux_dac (int slot, int which_dac, int value);
-
- /*!
- * \brief Read auxiliary analog to digital converter.
- *
- * \param slot 2-bit slot number. E.g., SLOT_TX_A
- * \param which_adc [0,1]
- * \param value return 12-bit value [0,4095]
- * \returns true iff successful
- */
- bool _read_aux_adc (int slot, int which_adc, int *value);
-
- /*!
- * \brief Read auxiliary analog to digital converter.
- *
- * \param slot 2-bit slot number. E.g., SLOT_TX_A
- * \param which_adc [0,1]
- * \returns value in the range [0,4095] if successful, else READ_FAILED.
- */
- int _read_aux_adc (int slot, int which_adc);
-
-
-public:
- virtual ~usrp_basic ();
-
-
- /*!
- * Return a vector of vectors that contain shared pointers
- * to the daughterboard instance(s) associated with the specified side.
- *
- * It is an error to use the returned objects after the usrp_basic
- * object has been destroyed.
- */
- std::vector<std::vector<db_base_sptr> > db() const { return d_db; }
-
- /*!
- * Return a vector of size >= 1 that contains shared pointers
- * to the daughterboard instance(s) associated with the specified side.
- *
- * \param which_side [0,1] which daughterboard
- *
- * It is an error to use the returned objects after the usrp_basic
- * object has been destroyed.
- */
- std::vector<db_base_sptr> db(int which_side);
-
- /*!
- * \brief is the subdev_spec valid?
- */
- bool is_valid(const usrp_subdev_spec &ss);
-
- /*!
- * \brief given a subdev_spec, return the corresponding daughterboard object.
- * \throws std::invalid_ argument if ss is invalid.
- *
- * \param ss specifies the side and subdevice
- */
- db_base_sptr selected_subdev(const usrp_subdev_spec &ss);
-
- /*!
- * \brief return frequency of master oscillator on USRP
- */
- long fpga_master_clock_freq () const { return d_fpga_master_clock_freq; }
-
- /*!
- * Tell API that the master oscillator on the USRP is operating at a non-standard
- * fixed frequency. This is only needed for custom USRP hardware modified to
- * operate at a different frequency from the default factory configuration. This
- * function must be called prior to any other API function.
- * \param master_clock USRP2 FPGA master clock frequency in Hz (10..64 MHz)
- */
- void set_fpga_master_clock_freq (long master_clock) { d_fpga_master_clock_freq = master_clock; }
-
- /*!
- * \returns usb data rate in bytes/sec
- */
- int usb_data_rate () const { return d_usb_data_rate; }
-
- void set_verbose (bool on) { d_verbose = on; }
-
- //! magic value used on alternate register read interfaces
- static const int READ_FAILED = -99999;
-
- /*!
- * \brief Write EEPROM on motherboard or any daughterboard.
- * \param i2c_addr I2C bus address of EEPROM
- * \param eeprom_offset byte offset in EEPROM to begin writing
- * \param buf the data to write
- * \returns true iff sucessful
- */
- bool write_eeprom (int i2c_addr, int eeprom_offset, const std::string buf);
-
- /*!
- * \brief Read EEPROM on motherboard or any daughterboard.
- * \param i2c_addr I2C bus address of EEPROM
- * \param eeprom_offset byte offset in EEPROM to begin reading
- * \param len number of bytes to read
- * \returns the data read if successful, else a zero length string.
- */
- std::string read_eeprom (int i2c_addr, int eeprom_offset, int len);
-
- /*!
- * \brief Write to I2C peripheral
- * \param i2c_addr I2C bus address (7-bits)
- * \param buf the data to write
- * \returns true iff successful
- * Writes are limited to a maximum of of 64 bytes.
- */
- bool write_i2c (int i2c_addr, const std::string buf);
-
- /*!
- * \brief Read from I2C peripheral
- * \param i2c_addr I2C bus address (7-bits)
- * \param len number of bytes to read
- * \returns the data read if successful, else a zero length string.
- * Reads are limited to a maximum of 64 bytes.
- */
- std::string read_i2c (int i2c_addr, int len);
-
- /*!
- * \brief Set ADC offset correction
- * \param which_adc which ADC[0,3]: 0 = RX_A I, 1 = RX_A Q...
- * \param offset 16-bit value to subtract from raw ADC input.
- */
- bool set_adc_offset (int which_adc, int offset);
-
- /*!
- * \brief Set DAC offset correction
- * \param which_dac which DAC[0,3]: 0 = TX_A I, 1 = TX_A Q...
- * \param offset 10-bit offset value (ambiguous format: See AD9862 datasheet).
- * \param offset_pin 1-bit value. If 0 offset applied to -ve differential pin;
- * If 1 offset applied to +ve differential pin.
- */
- bool set_dac_offset (int which_dac, int offset, int offset_pin);
-
- /*!
- * \brief Control ADC input buffer
- * \param which_adc which ADC[0,3]
- * \param bypass if non-zero, bypass input buffer and connect input
- * directly to switched cap SHA input of RxPGA.
- */
- bool set_adc_buffer_bypass (int which_adc, bool bypass);
-
- /*!
- * \brief Enable/disable automatic DC offset removal control loop in FPGA
- *
- * \param bits which control loops to enable
- * \param mask which \p bits to pay attention to
- *
- * If the corresponding bit is set, enable the automatic DC
- * offset correction control loop.
- *
- * <pre>
- * The 4 low bits are significant:
- *
- * ADC0 = (1 << 0)
- * ADC1 = (1 << 1)
- * ADC2 = (1 << 2)
- * ADC3 = (1 << 3)
- * </pre>
- *
- * By default the control loop is enabled on all ADC's.
- */
- bool set_dc_offset_cl_enable(int bits, int mask);
-
- /*!
- * \brief return the usrp's serial number.
- *
- * \returns non-zero length string iff successful.
- */
- std::string serial_number();
-
- /*!
- * \brief Return daughterboard ID for given side [0,1].
- *
- * \param which_side [0,1] which daughterboard
- *
- * \return daughterboard id >= 0 if successful
- * \return -1 if no daugherboard
- * \return -2 if invalid EEPROM on daughterboard
- */
- virtual int daughterboard_id (int which_side) const = 0;
-
- /*!
- * \brief Clock ticks to delay rising of T/R signal
- * \sa write_atr_mask, write_atr_txval, write_atr_rxval
- */
- bool write_atr_tx_delay(int value);
-
- /*!
- * \brief Clock ticks to delay falling edge of T/R signal
- * \sa write_atr_mask, write_atr_txval, write_atr_rxval
- */
- bool write_atr_rx_delay(int value);
-
-
-\f // ================================================================
- // Routines to access and control daughterboard specific i/o
- //
- // Those with a common_ prefix access either the Tx or Rx side depending
- // on the txrx parameter. Those without the common_ prefix are virtual
- // and are overriden in usrp_basic_rx and usrp_basic_tx to access the
- // the Rx or Tx sides automatically. We provide the common_ versions
- // for those daughterboards such as the WBX and XCVR2450 that share
- // h/w resources (such as the LO) between the Tx and Rx sides.
-
- // ----------------------------------------------------------------
- // BEGIN common_ daughterboard control functions
-
- /*!
- * \brief Set Programmable Gain Amplifier(PGA)
- *
- * \param txrx Tx or Rx?
- * \param which_amp which amp [0,3]
- * \param gain_in_db gain value(linear in dB)
- *
- * gain is rounded to closest setting supported by hardware.
- *
- * \returns true iff sucessful.
- *
- * \sa pga_min(), pga_max(), pga_db_per_step()
- */
- bool common_set_pga(txrx_t txrx, int which_amp, double gain_in_db);
-
- /*!
- * \brief Return programmable gain amplifier gain setting in dB.
- *
- * \param txrx Tx or Rx?
- * \param which_amp which amp [0,3]
- */
- double common_pga(txrx_t txrx, int which_amp) const;
-
- /*!
- * \brief Return minimum legal PGA gain in dB.
- * \param txrx Tx or Rx?
- */
- double common_pga_min(txrx_t txrx) const;
-
- /*!
- * \brief Return maximum legal PGA gain in dB.
- * \param txrx Tx or Rx?
- */
- double common_pga_max(txrx_t txrx) const;
-
- /*!
- * \brief Return hardware step size of PGA(linear in dB).
- * \param txrx Tx or Rx?
- */
- double common_pga_db_per_step(txrx_t txrx) const;
-
- /*!
- * \brief Write direction register(output enables) for pins that go to daughterboard.
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which size
- * \param value value to write into register
- * \param mask which bits of value to write into reg
- *
- * Each d'board has 16-bits of general purpose i/o.
- * Setting the bit makes it an output from the FPGA to the d'board.
- *
- * This register is initialized based on a value stored in the
- * d'board EEPROM. In general, you shouldn't be using this routine
- * without a very good reason. Using this method incorrectly will
- * kill your USRP motherboard and/or daughterboard.
- */
- bool _common_write_oe(txrx_t txrx, int which_side, int value, int mask);
-
- /*!
- * \brief Write daughterboard i/o pin value
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which d'board
- * \param value value to write into register
- * \param mask which bits of value to write into reg
- */
- bool common_write_io(txrx_t txrx, int which_side, int value, int mask);
-
- /*!
- * \brief Read daughterboard i/o pin value
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which d'board
- * \param value output
- */
- bool common_read_io(txrx_t txrx, int which_side, int *value);
-
- /*!
- * \brief Read daughterboard i/o pin value
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which d'board
- * \returns register value if successful, else READ_FAILED
- */
- int common_read_io(txrx_t txrx, int which_side);
-
- /*!
- * \brief Write daughterboard refclk config register
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which d'board
- * \param value value to write into register, see below
- *
- * <pre>
- * Control whether a reference clock is sent to the daughterboards,
- * and what frequency. The refclk is sent on d'board i/o pin 0.
- *
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-----------------------------------------------+-+------------+
- * | Reserved (Must be zero) |E| DIVISOR |
- * +-----------------------------------------------+-+------------+
- *
- * Bit 7 -- 1 turns on refclk, 0 allows IO use
- * Bits 6:0 Divider value
- * </pre>
- */
- bool common_write_refclk(txrx_t txrx, int which_side, int value);
-
- /*!
- * \brief Automatic Transmit/Receive switching
- * <pre>
- *
- * If automatic transmit/receive (ATR) switching is enabled in the
- * FR_ATR_CTL register, the presence or absence of data in the FPGA
- * transmit fifo selects between two sets of values for each of the 4
- * banks of daughterboard i/o pins.
- *
- * Each daughterboard slot has 3 16-bit registers associated with it:
- * FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
- *
- * FR_ATR_MASK_{0,1,2,3}:
- *
- * These registers determine which of the daugherboard i/o pins are
- * affected by ATR switching. If a bit in the mask is set, the
- * corresponding i/o bit is controlled by ATR, else it's output
- * value comes from the normal i/o pin output register:
- * FR_IO_{0,1,2,3}.
- *
- * FR_ATR_TXVAL_{0,1,2,3}:
- * FR_ATR_RXVAL_{0,1,2,3}:
- *
- * If the Tx fifo contains data, then the bits from TXVAL that are
- * selected by MASK are output. Otherwise, the bits from RXVAL that
- * are selected by MASK are output.
- * </pre>
- */
- bool common_write_atr_mask(txrx_t txrx, int which_side, int value);
- bool common_write_atr_txval(txrx_t txrx, int which_side, int value);
- bool common_write_atr_rxval(txrx_t txrx, int which_side, int value);
-
- /*!
- * \brief Write auxiliary digital to analog converter.
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which d'board
- * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's.
- * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's.
- * \param which_dac [2,3] TX slots must use only 2 and 3.
- * \param value [0,4095]
- * \returns true iff successful
- */
- bool common_write_aux_dac(txrx_t txrx, int which_side, int which_dac, int value);
-
- /*!
- * \brief Read auxiliary analog to digital converter.
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which d'board
- * \param which_adc [0,1]
- * \param value return 12-bit value [0,4095]
- * \returns true iff successful
- */
- bool common_read_aux_adc(txrx_t txrx, int which_side, int which_adc, int *value);
-
- /*!
- * \brief Read auxiliary analog to digital converter.
- *
- * \param txrx Tx or Rx?
- * \param which_side [0,1] which d'board
- * \param which_adc [0,1]
- * \returns value in the range [0,4095] if successful, else READ_FAILED.
- */
- int common_read_aux_adc(txrx_t txrx, int which_side, int which_adc);
-
- // END common_ daughterboard control functions\f
- // ----------------------------------------------------------------
- // BEGIN virtual daughterboard control functions
-
- /*!
- * \brief Set Programmable Gain Amplifier (PGA)
- *
- * \param which_amp which amp [0,3]
- * \param gain_in_db gain value (linear in dB)
- *
- * gain is rounded to closest setting supported by hardware.
- *
- * \returns true iff sucessful.
- *
- * \sa pga_min(), pga_max(), pga_db_per_step()
- */
- virtual bool set_pga (int which_amp, double gain_in_db) = 0;
-
- /*!
- * \brief Return programmable gain amplifier gain setting in dB.
- *
- * \param which_amp which amp [0,3]
- */
- virtual double pga (int which_amp) const = 0;
-
- /*!
- * \brief Return minimum legal PGA gain in dB.
- */
- virtual double pga_min () const = 0;
-
- /*!
- * \brief Return maximum legal PGA gain in dB.
- */
- virtual double pga_max () const = 0;
-
- /*!
- * \brief Return hardware step size of PGA (linear in dB).
- */
- virtual double pga_db_per_step () const = 0;
-
- /*!
- * \brief Write direction register (output enables) for pins that go to daughterboard.
- *
- * \param which_side [0,1] which size
- * \param value value to write into register
- * \param mask which bits of value to write into reg
- *
- * Each d'board has 16-bits of general purpose i/o.
- * Setting the bit makes it an output from the FPGA to the d'board.
- *
- * This register is initialized based on a value stored in the
- * d'board EEPROM. In general, you shouldn't be using this routine
- * without a very good reason. Using this method incorrectly will
- * kill your USRP motherboard and/or daughterboard.
- */
- virtual bool _write_oe (int which_side, int value, int mask) = 0;
-
- /*!
- * \brief Write daughterboard i/o pin value
- *
- * \param which_side [0,1] which d'board
- * \param value value to write into register
- * \param mask which bits of value to write into reg
- */
- virtual bool write_io (int which_side, int value, int mask) = 0;
-
- /*!
- * \brief Read daughterboard i/o pin value
- *
- * \param which_side [0,1] which d'board
- * \param value output
- */
- virtual bool read_io (int which_side, int *value) = 0;
-
- /*!
- * \brief Read daughterboard i/o pin value
- *
- * \param which_side [0,1] which d'board
- * \returns register value if successful, else READ_FAILED
- */
- virtual int read_io (int which_side) = 0;
-
- /*!
- * \brief Write daughterboard refclk config register
- *
- * \param which_side [0,1] which d'board
- * \param value value to write into register, see below
- *
- * <pre>
- * Control whether a reference clock is sent to the daughterboards,
- * and what frequency. The refclk is sent on d'board i/o pin 0.
- *
- * 3 2 1
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- * +-----------------------------------------------+-+------------+
- * | Reserved (Must be zero) |E| DIVISOR |
- * +-----------------------------------------------+-+------------+
- *
- * Bit 7 -- 1 turns on refclk, 0 allows IO use
- * Bits 6:0 Divider value
- * </pre>
- */
- virtual bool write_refclk(int which_side, int value) = 0;
-
- virtual bool write_atr_mask(int which_side, int value) = 0;
- virtual bool write_atr_txval(int which_side, int value) = 0;
- virtual bool write_atr_rxval(int which_side, int value) = 0;
-
- /*!
- * \brief Write auxiliary digital to analog converter.
- *
- * \param which_side [0,1] which d'board
- * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's.
- * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's.
- * \param which_dac [2,3] TX slots must use only 2 and 3.
- * \param value [0,4095]
- * \returns true iff successful
- */
- virtual bool write_aux_dac (int which_side, int which_dac, int value) = 0;
-
- /*!
- * \brief Read auxiliary analog to digital converter.
- *
- * \param which_side [0,1] which d'board
- * \param which_adc [0,1]
- * \param value return 12-bit value [0,4095]
- * \returns true iff successful
- */
- virtual bool read_aux_adc (int which_side, int which_adc, int *value) = 0;
-
- /*!
- * \brief Read auxiliary analog to digital converter.
- *
- * \param which_side [0,1] which d'board
- * \param which_adc [0,1]
- * \returns value in the range [0,4095] if successful, else READ_FAILED.
- */
- virtual int read_aux_adc (int which_side, int which_adc) = 0;
-
- /*!
- * \brief returns current fusb block size
- */
- virtual int block_size() const = 0;
-
- /*!
- * \brief returns A/D or D/A converter rate in Hz
- */
- virtual long converter_rate() const = 0;
-
- // END virtual daughterboard control functions\f
-
- // ----------------------------------------------------------------
- // Low level implementation routines.
- // You probably shouldn't be using these...
- //
-
- bool _set_led (int which_led, bool on);
-
- /*!
- * \brief Write FPGA register.
- * \param regno 7-bit register number
- * \param value 32-bit value
- * \returns true iff successful
- */
- bool _write_fpga_reg (int regno, int value); //< 7-bit regno, 32-bit value
-
- /*!
- * \brief Read FPGA register.
- * \param regno 7-bit register number
- * \param value 32-bit value
- * \returns true iff successful
- */
- bool _read_fpga_reg (int regno, int *value); //< 7-bit regno, 32-bit value
-
- /*!
- * \brief Read FPGA register.
- * \param regno 7-bit register number
- * \returns register value if successful, else READ_FAILED
- */
- int _read_fpga_reg (int regno);
-
- /*!
- * \brief Write FPGA register with mask.
- * \param regno 7-bit register number
- * \param value 16-bit value
- * \param mask 16-bit value
- * \returns true if successful
- * Only use this for registers who actually implement a mask in the verilog firmware, like FR_RX_MASTER_SLAVE
- */
- bool _write_fpga_reg_masked (int regno, int value, int mask);
-
- /*!
- * \brief Write AD9862 register.
- * \param which_codec 0 or 1
- * \param regno 6-bit register number
- * \param value 8-bit value
- * \returns true iff successful
- */
- bool _write_9862 (int which_codec, int regno, unsigned char value);
-
- /*!
- * \brief Read AD9862 register.
- * \param which_codec 0 or 1
- * \param regno 6-bit register number
- * \param value 8-bit value
- * \returns true iff successful
- */
- bool _read_9862 (int which_codec, int regno, unsigned char *value) const;
-
- /*!
- * \brief Read AD9862 register.
- * \param which_codec 0 or 1
- * \param regno 6-bit register number
- * \returns register value if successful, else READ_FAILED
- */
- int _read_9862 (int which_codec, int regno) const;
-
- /*!
- * \brief Write data to SPI bus peripheral.
- *
- * \param optional_header 0,1 or 2 bytes to write before buf.
- * \param enables bitmask of peripherals to write. See usrp_spi_defs.h
- * \param format transaction format. See usrp_spi_defs.h SPI_FMT_*
- * \param buf the data to write
- * \returns true iff successful
- * Writes are limited to a maximum of 64 bytes.
- *
- * If \p format specifies that optional_header bytes are present, they are
- * written to the peripheral immediately prior to writing \p buf.
- */
- bool _write_spi (int optional_header, int enables, int format, std::string buf);
-
- /*
- * \brief Read data from SPI bus peripheral.
- *
- * \param optional_header 0,1 or 2 bytes to write before buf.
- * \param enables bitmask of peripheral to read. See usrp_spi_defs.h
- * \param format transaction format. See usrp_spi_defs.h SPI_FMT_*
- * \param len number of bytes to read. Must be in [0,64].
- * \returns the data read if sucessful, else a zero length string.
- *
- * Reads are limited to a maximum of 64 bytes.
- *
- * If \p format specifies that optional_header bytes are present, they
- * are written to the peripheral first. Then \p len bytes are read from
- * the peripheral and returned.
- */
- std::string _read_spi (int optional_header, int enables, int format, int len);
-
- /*!
- * \brief Start data transfers.
- * Called in base class to derived class order.
- */
- bool start ();
-
- /*!
- * \brief Stop data transfers.
- * Called in base class to derived class order.
- */
- bool stop ();
-};
-
-\f/*!
- * \brief class for accessing the receive side of the USRP
- * \ingroup usrp
- */
-class usrp_basic_rx : public usrp_basic
-{
-private:
- fusb_devhandle *d_devhandle;
- fusb_ephandle *d_ephandle;
- int d_bytes_seen; // how many bytes we've seen
- bool d_first_read;
- bool d_rx_enable;
-
-protected:
- /*!
- * \param which_board Which USRP board on usb (not particularly useful; use 0)
- * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
- * Use zero for a reasonable default.
- * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
- * \param fpga_filename name of the rbf file to load
- * \param firmware_filename name of ihx file to load
- */
- usrp_basic_rx (int which_board,
- int fusb_block_size=0,
- int fusb_nblocks=0,
- const std::string fpga_filename = "",
- const std::string firmware_filename = ""
- ); // throws if trouble
-
- bool set_rx_enable (bool on);
- bool rx_enable () const { return d_rx_enable; }
-
- bool disable_rx (); // conditional disable, return prev state
- void restore_rx (bool on); // conditional set
-
- void probe_rx_slots (bool verbose);
-
-public:
- ~usrp_basic_rx ();
-
- /*!
- * \brief invokes constructor, returns instance or 0 if trouble
- *
- * \param which_board Which USRP board on usb (not particularly useful; use 0)
- * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
- * Use zero for a reasonable default.
- * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
- * \param fpga_filename name of file that contains image to load into FPGA
- * \param firmware_filename name of file that contains image to load into FX2
- */
- static usrp_basic_rx *make (int which_board,
- int fusb_block_size=0,
- int fusb_nblocks=0,
- const std::string fpga_filename = "",
- const std::string firmware_filename = ""
- );
-
- /*!
- * \brief tell the fpga the rate rx samples are coming from the A/D's
- *
- * div = fpga_master_clock_freq () / sample_rate
- *
- * sample_rate is determined by a myriad of registers
- * in the 9862. That's why you have to tell us, so
- * we can tell the fpga.
- */
- bool set_fpga_rx_sample_rate_divisor (unsigned int div);
-
- /*!
- * \brief read data from the D/A's via the FPGA.
- * \p len must be a multiple of 512 bytes.
- *
- * \returns the number of bytes read, or -1 on error.
- *
- * If overrun is non-NULL it will be set true iff an RX overrun is detected.
- */
- int read (void *buf, int len, bool *overrun);
-
-
- //! sampling rate of A/D converter
- virtual long converter_rate() const { return fpga_master_clock_freq(); } // 64M
- long adc_rate() const { return converter_rate(); }
- int daughterboard_id (int which_side) const { return d_dbid[which_side & 0x1]; }
-
- bool set_pga (int which_amp, double gain_in_db);
- double pga (int which_amp) const;
- double pga_min () const;
- double pga_max () const;
- double pga_db_per_step () const;
-
- bool _write_oe (int which_side, int value, int mask);
- bool write_io (int which_side, int value, int mask);
- bool read_io (int which_side, int *value);
- int read_io (int which_side);
- bool write_refclk(int which_side, int value);
- bool write_atr_mask(int which_side, int value);
- bool write_atr_txval(int which_side, int value);
- bool write_atr_rxval(int which_side, int value);
-
- bool write_aux_dac (int which_side, int which_dac, int value);
- bool read_aux_adc (int which_side, int which_adc, int *value);
- int read_aux_adc (int which_side, int which_adc);
-
- int block_size() const;
-
- // called in base class to derived class order
- bool start ();
- bool stop ();
-};
-
-\f/*!
- * \brief class for accessing the transmit side of the USRP
- * \ingroup usrp
- */
-class usrp_basic_tx : public usrp_basic
-{
-private:
- fusb_devhandle *d_devhandle;
- fusb_ephandle *d_ephandle;
- int d_bytes_seen; // how many bytes we've seen
- bool d_first_write;
- bool d_tx_enable;
-
- protected:
- /*!
- * \param which_board Which USRP board on usb (not particularly useful; use 0)
- * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
- * Use zero for a reasonable default.
- * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
- * \param fpga_filename name of file that contains image to load into FPGA
- * \param firmware_filename name of file that contains image to load into FX2
- */
- usrp_basic_tx (int which_board,
- int fusb_block_size=0,
- int fusb_nblocks=0,
- const std::string fpga_filename = "",
- const std::string firmware_filename = ""
- ); // throws if trouble
-
- bool set_tx_enable (bool on);
- bool tx_enable () const { return d_tx_enable; }
-
- bool disable_tx (); // conditional disable, return prev state
- void restore_tx (bool on); // conditional set
-
- void probe_tx_slots (bool verbose);
-
-public:
-
- ~usrp_basic_tx ();
-
- /*!
- * \brief invokes constructor, returns instance or 0 if trouble
- *
- * \param which_board Which USRP board on usb (not particularly useful; use 0)
- * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
- * Use zero for a reasonable default.
- * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
- * \param fpga_filename name of file that contains image to load into FPGA
- * \param firmware_filename name of file that contains image to load into FX2
- */
- static usrp_basic_tx *make (int which_board, int fusb_block_size=0, int fusb_nblocks=0,
- const std::string fpga_filename = "",
- const std::string firmware_filename = ""
- );
-
- /*!
- * \brief tell the fpga the rate tx samples are going to the D/A's
- *
- * div = fpga_master_clock_freq () * 2
- *
- * sample_rate is determined by a myriad of registers
- * in the 9862. That's why you have to tell us, so
- * we can tell the fpga.
- */
- bool set_fpga_tx_sample_rate_divisor (unsigned int div);
-
- /*!
- * \brief Write data to the A/D's via the FPGA.
- *
- * \p len must be a multiple of 512 bytes.
- * \returns number of bytes written or -1 on error.
- *
- * if \p underrun is non-NULL, it will be set to true iff
- * a transmit underrun condition is detected.
- */
- int write (const void *buf, int len, bool *underrun);
-
- /*
- * Block until all outstanding writes have completed.
- * This is typically used to assist with benchmarking
- */
- void wait_for_completion ();
-
- //! sampling rate of D/A converter
- virtual long converter_rate() const { return fpga_master_clock_freq () * 2; } // 128M
- long dac_rate() const { return converter_rate(); }
- int daughterboard_id (int which_side) const { return d_dbid[which_side & 0x1]; }
-
- bool set_pga (int which_amp, double gain_in_db);
- double pga (int which_amp) const;
- double pga_min () const;
- double pga_max () const;
- double pga_db_per_step () const;
-
- bool _write_oe (int which_side, int value, int mask);
- bool write_io (int which_side, int value, int mask);
- bool read_io (int which_side, int *value);
- int read_io (int which_side);
- bool write_refclk(int which_side, int value);
- bool write_atr_mask(int which_side, int value);
- bool write_atr_txval(int which_side, int value);
- bool write_atr_rxval(int which_side, int value);
-
- bool write_aux_dac (int which_side, int which_dac, int value);
- bool read_aux_adc (int which_side, int which_adc, int *value);
- int read_aux_adc (int which_side, int which_adc);
-
- int block_size() const;
-
- // called in base class to derived class order
- bool start ();
- bool stop ();
-};
-
-#endif
--- /dev/null
+class fusb_devhandle;
+class fusb_ephandle;
+
+enum txrx_t {
+ C_RX = 0,
+ C_TX = 1
+};
+
+/*
+ * ----------------------------------------------------------------------
+ * Mid level interface to the Universal Software Radio Peripheral (Rev 1)
+ *
+ * These classes implement the basic functionality for talking to the
+ * USRP. They try to be as independent of the signal processing code
+ * in FPGA as possible. They implement access to the low level
+ * peripherals on the board, provide a common way for reading and
+ * writing registers in the FPGA, and provide the high speed interface
+ * to streaming data across the USB.
+ *
+ * It is expected that subclasses will be derived that provide
+ * access to the functionality to a particular FPGA configuration.
+ * ----------------------------------------------------------------------
+ */
+
+
+/*!
+ * \brief abstract base class for usrp operations
+ * \ingroup usrp
+ */
+class usrp_basic : boost::noncopyable
+{
+protected:
+ void shutdown_daughterboards();
+
+protected:
+ libusb_device_handle *d_udh;
+ struct libusb_context *d_ctx;
+ int d_usb_data_rate; // bytes/sec
+ int d_bytes_per_poll; // how often to poll for overruns
+ bool d_verbose;
+ long d_fpga_master_clock_freq;
+
+ static const int MAX_REGS = 128;
+ unsigned int d_fpga_shadows[MAX_REGS];
+
+ int d_dbid[2]; // daughterboard ID's (side A, side B)
+
+ /*!
+ * Shared pointers to subclasses of db_base.
+ *
+ * The outer vector is of length 2 (0 = side A, 1 = side B). The
+ * inner vectors are of length 1, 2 or 3 depending on the number of
+ * subdevices implemented by the daugherboard. At this time, only
+ * the Basic Rx and LF Rx implement more than 1 subdevice.
+ */
+ std::vector< std::vector<db_base_sptr> > d_db;
+
+ //! One time call, made only only from usrp_standard_*::make after shared_ptr is created.
+ void init_db(usrp_basic_sptr u);
+
+
+ usrp_basic (int which_board,
+ libusb_device_handle *open_interface (libusb_device *dev),
+ const std::string fpga_filename = "",
+ const std::string firmware_filename = "");
+
+ /*!
+ * \brief advise usrp_basic of usb data rate (bytes/sec)
+ *
+ * N.B., this doesn't tweak any hardware. Derived classes
+ * should call this to inform us of the data rate whenever it's
+ * first set or if it changes.
+ *
+ * \param usb_data_rate bytes/sec
+ */
+ void set_usb_data_rate (int usb_data_rate);
+
+ /*!
+ * \brief Write auxiliary digital to analog converter.
+ *
+ * \param slot Which Tx or Rx slot to write.
+ * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's.
+ * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's.
+ * \param which_dac [0,3] RX slots must use only 0 and 1. TX slots must use only 2 and 3.
+ * \param value [0,4095]
+ * \returns true iff successful
+ */
+ bool _write_aux_dac (int slot, int which_dac, int value);
+
+ /*!
+ * \brief Read auxiliary analog to digital converter.
+ *
+ * \param slot 2-bit slot number. E.g., SLOT_TX_A
+ * \param which_adc [0,1]
+ * \param value return 12-bit value [0,4095]
+ * \returns true iff successful
+ */
+ bool _read_aux_adc (int slot, int which_adc, int *value);
+
+ /*!
+ * \brief Read auxiliary analog to digital converter.
+ *
+ * \param slot 2-bit slot number. E.g., SLOT_TX_A
+ * \param which_adc [0,1]
+ * \returns value in the range [0,4095] if successful, else READ_FAILED.
+ */
+ int _read_aux_adc (int slot, int which_adc);
+
+
+public:
+ virtual ~usrp_basic ();
+
+
+ /*!
+ * Return a vector of vectors that contain shared pointers
+ * to the daughterboard instance(s) associated with the specified side.
+ *
+ * It is an error to use the returned objects after the usrp_basic
+ * object has been destroyed.
+ */
+ std::vector<std::vector<db_base_sptr> > db() const { return d_db; }
+
+ /*!
+ * Return a vector of size >= 1 that contains shared pointers
+ * to the daughterboard instance(s) associated with the specified side.
+ *
+ * \param which_side [0,1] which daughterboard
+ *
+ * It is an error to use the returned objects after the usrp_basic
+ * object has been destroyed.
+ */
+ std::vector<db_base_sptr> db(int which_side);
+
+ /*!
+ * \brief is the subdev_spec valid?
+ */
+ bool is_valid(const usrp_subdev_spec &ss);
+
+ /*!
+ * \brief given a subdev_spec, return the corresponding daughterboard object.
+ * \throws std::invalid_ argument if ss is invalid.
+ *
+ * \param ss specifies the side and subdevice
+ */
+ db_base_sptr selected_subdev(const usrp_subdev_spec &ss);
+
+ /*!
+ * \brief return frequency of master oscillator on USRP
+ */
+ long fpga_master_clock_freq () const { return d_fpga_master_clock_freq; }
+
+ /*!
+ * Tell API that the master oscillator on the USRP is operating at a non-standard
+ * fixed frequency. This is only needed for custom USRP hardware modified to
+ * operate at a different frequency from the default factory configuration. This
+ * function must be called prior to any other API function.
+ * \param master_clock USRP2 FPGA master clock frequency in Hz (10..64 MHz)
+ */
+ void set_fpga_master_clock_freq (long master_clock) { d_fpga_master_clock_freq = master_clock; }
+
+ /*!
+ * \returns usb data rate in bytes/sec
+ */
+ int usb_data_rate () const { return d_usb_data_rate; }
+
+ void set_verbose (bool on) { d_verbose = on; }
+
+ //! magic value used on alternate register read interfaces
+ static const int READ_FAILED = -99999;
+
+ /*!
+ * \brief Write EEPROM on motherboard or any daughterboard.
+ * \param i2c_addr I2C bus address of EEPROM
+ * \param eeprom_offset byte offset in EEPROM to begin writing
+ * \param buf the data to write
+ * \returns true iff sucessful
+ */
+ bool write_eeprom (int i2c_addr, int eeprom_offset, const std::string buf);
+
+ /*!
+ * \brief Read EEPROM on motherboard or any daughterboard.
+ * \param i2c_addr I2C bus address of EEPROM
+ * \param eeprom_offset byte offset in EEPROM to begin reading
+ * \param len number of bytes to read
+ * \returns the data read if successful, else a zero length string.
+ */
+ std::string read_eeprom (int i2c_addr, int eeprom_offset, int len);
+
+ /*!
+ * \brief Write to I2C peripheral
+ * \param i2c_addr I2C bus address (7-bits)
+ * \param buf the data to write
+ * \returns true iff successful
+ * Writes are limited to a maximum of of 64 bytes.
+ */
+ bool write_i2c (int i2c_addr, const std::string buf);
+
+ /*!
+ * \brief Read from I2C peripheral
+ * \param i2c_addr I2C bus address (7-bits)
+ * \param len number of bytes to read
+ * \returns the data read if successful, else a zero length string.
+ * Reads are limited to a maximum of 64 bytes.
+ */
+ std::string read_i2c (int i2c_addr, int len);
+
+ /*!
+ * \brief Set ADC offset correction
+ * \param which_adc which ADC[0,3]: 0 = RX_A I, 1 = RX_A Q...
+ * \param offset 16-bit value to subtract from raw ADC input.
+ */
+ bool set_adc_offset (int which_adc, int offset);
+
+ /*!
+ * \brief Set DAC offset correction
+ * \param which_dac which DAC[0,3]: 0 = TX_A I, 1 = TX_A Q...
+ * \param offset 10-bit offset value (ambiguous format: See AD9862 datasheet).
+ * \param offset_pin 1-bit value. If 0 offset applied to -ve differential pin;
+ * If 1 offset applied to +ve differential pin.
+ */
+ bool set_dac_offset (int which_dac, int offset, int offset_pin);
+
+ /*!
+ * \brief Control ADC input buffer
+ * \param which_adc which ADC[0,3]
+ * \param bypass if non-zero, bypass input buffer and connect input
+ * directly to switched cap SHA input of RxPGA.
+ */
+ bool set_adc_buffer_bypass (int which_adc, bool bypass);
+
+ /*!
+ * \brief Enable/disable automatic DC offset removal control loop in FPGA
+ *
+ * \param bits which control loops to enable
+ * \param mask which \p bits to pay attention to
+ *
+ * If the corresponding bit is set, enable the automatic DC
+ * offset correction control loop.
+ *
+ * <pre>
+ * The 4 low bits are significant:
+ *
+ * ADC0 = (1 << 0)
+ * ADC1 = (1 << 1)
+ * ADC2 = (1 << 2)
+ * ADC3 = (1 << 3)
+ * </pre>
+ *
+ * By default the control loop is enabled on all ADC's.
+ */
+ bool set_dc_offset_cl_enable(int bits, int mask);
+
+ /*!
+ * \brief return the usrp's serial number.
+ *
+ * \returns non-zero length string iff successful.
+ */
+ std::string serial_number();
+
+ /*!
+ * \brief Return daughterboard ID for given side [0,1].
+ *
+ * \param which_side [0,1] which daughterboard
+ *
+ * \return daughterboard id >= 0 if successful
+ * \return -1 if no daugherboard
+ * \return -2 if invalid EEPROM on daughterboard
+ */
+ virtual int daughterboard_id (int which_side) const = 0;
+
+ /*!
+ * \brief Clock ticks to delay rising of T/R signal
+ * \sa write_atr_mask, write_atr_txval, write_atr_rxval
+ */
+ bool write_atr_tx_delay(int value);
+
+ /*!
+ * \brief Clock ticks to delay falling edge of T/R signal
+ * \sa write_atr_mask, write_atr_txval, write_atr_rxval
+ */
+ bool write_atr_rx_delay(int value);
+
+
+\f // ================================================================
+ // Routines to access and control daughterboard specific i/o
+ //
+ // Those with a common_ prefix access either the Tx or Rx side depending
+ // on the txrx parameter. Those without the common_ prefix are virtual
+ // and are overriden in usrp_basic_rx and usrp_basic_tx to access the
+ // the Rx or Tx sides automatically. We provide the common_ versions
+ // for those daughterboards such as the WBX and XCVR2450 that share
+ // h/w resources (such as the LO) between the Tx and Rx sides.
+
+ // ----------------------------------------------------------------
+ // BEGIN common_ daughterboard control functions
+
+ /*!
+ * \brief Set Programmable Gain Amplifier(PGA)
+ *
+ * \param txrx Tx or Rx?
+ * \param which_amp which amp [0,3]
+ * \param gain_in_db gain value(linear in dB)
+ *
+ * gain is rounded to closest setting supported by hardware.
+ *
+ * \returns true iff sucessful.
+ *
+ * \sa pga_min(), pga_max(), pga_db_per_step()
+ */
+ bool common_set_pga(txrx_t txrx, int which_amp, double gain_in_db);
+
+ /*!
+ * \brief Return programmable gain amplifier gain setting in dB.
+ *
+ * \param txrx Tx or Rx?
+ * \param which_amp which amp [0,3]
+ */
+ double common_pga(txrx_t txrx, int which_amp) const;
+
+ /*!
+ * \brief Return minimum legal PGA gain in dB.
+ * \param txrx Tx or Rx?
+ */
+ double common_pga_min(txrx_t txrx) const;
+
+ /*!
+ * \brief Return maximum legal PGA gain in dB.
+ * \param txrx Tx or Rx?
+ */
+ double common_pga_max(txrx_t txrx) const;
+
+ /*!
+ * \brief Return hardware step size of PGA(linear in dB).
+ * \param txrx Tx or Rx?
+ */
+ double common_pga_db_per_step(txrx_t txrx) const;
+
+ /*!
+ * \brief Write direction register(output enables) for pins that go to daughterboard.
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which size
+ * \param value value to write into register
+ * \param mask which bits of value to write into reg
+ *
+ * Each d'board has 16-bits of general purpose i/o.
+ * Setting the bit makes it an output from the FPGA to the d'board.
+ *
+ * This register is initialized based on a value stored in the
+ * d'board EEPROM. In general, you shouldn't be using this routine
+ * without a very good reason. Using this method incorrectly will
+ * kill your USRP motherboard and/or daughterboard.
+ */
+ bool _common_write_oe(txrx_t txrx, int which_side, int value, int mask);
+
+ /*!
+ * \brief Write daughterboard i/o pin value
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which d'board
+ * \param value value to write into register
+ * \param mask which bits of value to write into reg
+ */
+ bool common_write_io(txrx_t txrx, int which_side, int value, int mask);
+
+ /*!
+ * \brief Read daughterboard i/o pin value
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which d'board
+ * \param value output
+ */
+ bool common_read_io(txrx_t txrx, int which_side, int *value);
+
+ /*!
+ * \brief Read daughterboard i/o pin value
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which d'board
+ * \returns register value if successful, else READ_FAILED
+ */
+ int common_read_io(txrx_t txrx, int which_side);
+
+ /*!
+ * \brief Write daughterboard refclk config register
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which d'board
+ * \param value value to write into register, see below
+ *
+ * <pre>
+ * Control whether a reference clock is sent to the daughterboards,
+ * and what frequency. The refclk is sent on d'board i/o pin 0.
+ *
+ * 3 2 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-----------------------------------------------+-+------------+
+ * | Reserved (Must be zero) |E| DIVISOR |
+ * +-----------------------------------------------+-+------------+
+ *
+ * Bit 7 -- 1 turns on refclk, 0 allows IO use
+ * Bits 6:0 Divider value
+ * </pre>
+ */
+ bool common_write_refclk(txrx_t txrx, int which_side, int value);
+
+ /*!
+ * \brief Automatic Transmit/Receive switching
+ * <pre>
+ *
+ * If automatic transmit/receive (ATR) switching is enabled in the
+ * FR_ATR_CTL register, the presence or absence of data in the FPGA
+ * transmit fifo selects between two sets of values for each of the 4
+ * banks of daughterboard i/o pins.
+ *
+ * Each daughterboard slot has 3 16-bit registers associated with it:
+ * FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_*
+ *
+ * FR_ATR_MASK_{0,1,2,3}:
+ *
+ * These registers determine which of the daugherboard i/o pins are
+ * affected by ATR switching. If a bit in the mask is set, the
+ * corresponding i/o bit is controlled by ATR, else it's output
+ * value comes from the normal i/o pin output register:
+ * FR_IO_{0,1,2,3}.
+ *
+ * FR_ATR_TXVAL_{0,1,2,3}:
+ * FR_ATR_RXVAL_{0,1,2,3}:
+ *
+ * If the Tx fifo contains data, then the bits from TXVAL that are
+ * selected by MASK are output. Otherwise, the bits from RXVAL that
+ * are selected by MASK are output.
+ * </pre>
+ */
+ bool common_write_atr_mask(txrx_t txrx, int which_side, int value);
+ bool common_write_atr_txval(txrx_t txrx, int which_side, int value);
+ bool common_write_atr_rxval(txrx_t txrx, int which_side, int value);
+
+ /*!
+ * \brief Write auxiliary digital to analog converter.
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which d'board
+ * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's.
+ * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's.
+ * \param which_dac [2,3] TX slots must use only 2 and 3.
+ * \param value [0,4095]
+ * \returns true iff successful
+ */
+ bool common_write_aux_dac(txrx_t txrx, int which_side, int which_dac, int value);
+
+ /*!
+ * \brief Read auxiliary analog to digital converter.
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which d'board
+ * \param which_adc [0,1]
+ * \param value return 12-bit value [0,4095]
+ * \returns true iff successful
+ */
+ bool common_read_aux_adc(txrx_t txrx, int which_side, int which_adc, int *value);
+
+ /*!
+ * \brief Read auxiliary analog to digital converter.
+ *
+ * \param txrx Tx or Rx?
+ * \param which_side [0,1] which d'board
+ * \param which_adc [0,1]
+ * \returns value in the range [0,4095] if successful, else READ_FAILED.
+ */
+ int common_read_aux_adc(txrx_t txrx, int which_side, int which_adc);
+
+ // END common_ daughterboard control functions\f
+ // ----------------------------------------------------------------
+ // BEGIN virtual daughterboard control functions
+
+ /*!
+ * \brief Set Programmable Gain Amplifier (PGA)
+ *
+ * \param which_amp which amp [0,3]
+ * \param gain_in_db gain value (linear in dB)
+ *
+ * gain is rounded to closest setting supported by hardware.
+ *
+ * \returns true iff sucessful.
+ *
+ * \sa pga_min(), pga_max(), pga_db_per_step()
+ */
+ virtual bool set_pga (int which_amp, double gain_in_db) = 0;
+
+ /*!
+ * \brief Return programmable gain amplifier gain setting in dB.
+ *
+ * \param which_amp which amp [0,3]
+ */
+ virtual double pga (int which_amp) const = 0;
+
+ /*!
+ * \brief Return minimum legal PGA gain in dB.
+ */
+ virtual double pga_min () const = 0;
+
+ /*!
+ * \brief Return maximum legal PGA gain in dB.
+ */
+ virtual double pga_max () const = 0;
+
+ /*!
+ * \brief Return hardware step size of PGA (linear in dB).
+ */
+ virtual double pga_db_per_step () const = 0;
+
+ /*!
+ * \brief Write direction register (output enables) for pins that go to daughterboard.
+ *
+ * \param which_side [0,1] which size
+ * \param value value to write into register
+ * \param mask which bits of value to write into reg
+ *
+ * Each d'board has 16-bits of general purpose i/o.
+ * Setting the bit makes it an output from the FPGA to the d'board.
+ *
+ * This register is initialized based on a value stored in the
+ * d'board EEPROM. In general, you shouldn't be using this routine
+ * without a very good reason. Using this method incorrectly will
+ * kill your USRP motherboard and/or daughterboard.
+ */
+ virtual bool _write_oe (int which_side, int value, int mask) = 0;
+
+ /*!
+ * \brief Write daughterboard i/o pin value
+ *
+ * \param which_side [0,1] which d'board
+ * \param value value to write into register
+ * \param mask which bits of value to write into reg
+ */
+ virtual bool write_io (int which_side, int value, int mask) = 0;
+
+ /*!
+ * \brief Read daughterboard i/o pin value
+ *
+ * \param which_side [0,1] which d'board
+ * \param value output
+ */
+ virtual bool read_io (int which_side, int *value) = 0;
+
+ /*!
+ * \brief Read daughterboard i/o pin value
+ *
+ * \param which_side [0,1] which d'board
+ * \returns register value if successful, else READ_FAILED
+ */
+ virtual int read_io (int which_side) = 0;
+
+ /*!
+ * \brief Write daughterboard refclk config register
+ *
+ * \param which_side [0,1] which d'board
+ * \param value value to write into register, see below
+ *
+ * <pre>
+ * Control whether a reference clock is sent to the daughterboards,
+ * and what frequency. The refclk is sent on d'board i/o pin 0.
+ *
+ * 3 2 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-----------------------------------------------+-+------------+
+ * | Reserved (Must be zero) |E| DIVISOR |
+ * +-----------------------------------------------+-+------------+
+ *
+ * Bit 7 -- 1 turns on refclk, 0 allows IO use
+ * Bits 6:0 Divider value
+ * </pre>
+ */
+ virtual bool write_refclk(int which_side, int value) = 0;
+
+ virtual bool write_atr_mask(int which_side, int value) = 0;
+ virtual bool write_atr_txval(int which_side, int value) = 0;
+ virtual bool write_atr_rxval(int which_side, int value) = 0;
+
+ /*!
+ * \brief Write auxiliary digital to analog converter.
+ *
+ * \param which_side [0,1] which d'board
+ * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's.
+ * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's.
+ * \param which_dac [2,3] TX slots must use only 2 and 3.
+ * \param value [0,4095]
+ * \returns true iff successful
+ */
+ virtual bool write_aux_dac (int which_side, int which_dac, int value) = 0;
+
+ /*!
+ * \brief Read auxiliary analog to digital converter.
+ *
+ * \param which_side [0,1] which d'board
+ * \param which_adc [0,1]
+ * \param value return 12-bit value [0,4095]
+ * \returns true iff successful
+ */
+ virtual bool read_aux_adc (int which_side, int which_adc, int *value) = 0;
+
+ /*!
+ * \brief Read auxiliary analog to digital converter.
+ *
+ * \param which_side [0,1] which d'board
+ * \param which_adc [0,1]
+ * \returns value in the range [0,4095] if successful, else READ_FAILED.
+ */
+ virtual int read_aux_adc (int which_side, int which_adc) = 0;
+
+ /*!
+ * \brief returns current fusb block size
+ */
+ virtual int block_size() const = 0;
+
+ /*!
+ * \brief returns A/D or D/A converter rate in Hz
+ */
+ virtual long converter_rate() const = 0;
+
+ // END virtual daughterboard control functions\f
+
+ // ----------------------------------------------------------------
+ // Low level implementation routines.
+ // You probably shouldn't be using these...
+ //
+
+ bool _set_led (int which_led, bool on);
+
+ /*!
+ * \brief Write FPGA register.
+ * \param regno 7-bit register number
+ * \param value 32-bit value
+ * \returns true iff successful
+ */
+ bool _write_fpga_reg (int regno, int value); //< 7-bit regno, 32-bit value
+
+ /*!
+ * \brief Read FPGA register.
+ * \param regno 7-bit register number
+ * \param value 32-bit value
+ * \returns true iff successful
+ */
+ bool _read_fpga_reg (int regno, int *value); //< 7-bit regno, 32-bit value
+
+ /*!
+ * \brief Read FPGA register.
+ * \param regno 7-bit register number
+ * \returns register value if successful, else READ_FAILED
+ */
+ int _read_fpga_reg (int regno);
+
+ /*!
+ * \brief Write FPGA register with mask.
+ * \param regno 7-bit register number
+ * \param value 16-bit value
+ * \param mask 16-bit value
+ * \returns true if successful
+ * Only use this for registers who actually implement a mask in the verilog firmware, like FR_RX_MASTER_SLAVE
+ */
+ bool _write_fpga_reg_masked (int regno, int value, int mask);
+
+ /*!
+ * \brief Write AD9862 register.
+ * \param which_codec 0 or 1
+ * \param regno 6-bit register number
+ * \param value 8-bit value
+ * \returns true iff successful
+ */
+ bool _write_9862 (int which_codec, int regno, unsigned char value);
+
+ /*!
+ * \brief Read AD9862 register.
+ * \param which_codec 0 or 1
+ * \param regno 6-bit register number
+ * \param value 8-bit value
+ * \returns true iff successful
+ */
+ bool _read_9862 (int which_codec, int regno, unsigned char *value) const;
+
+ /*!
+ * \brief Read AD9862 register.
+ * \param which_codec 0 or 1
+ * \param regno 6-bit register number
+ * \returns register value if successful, else READ_FAILED
+ */
+ int _read_9862 (int which_codec, int regno) const;
+
+ /*!
+ * \brief Write data to SPI bus peripheral.
+ *
+ * \param optional_header 0,1 or 2 bytes to write before buf.
+ * \param enables bitmask of peripherals to write. See usrp_spi_defs.h
+ * \param format transaction format. See usrp_spi_defs.h SPI_FMT_*
+ * \param buf the data to write
+ * \returns true iff successful
+ * Writes are limited to a maximum of 64 bytes.
+ *
+ * If \p format specifies that optional_header bytes are present, they are
+ * written to the peripheral immediately prior to writing \p buf.
+ */
+ bool _write_spi (int optional_header, int enables, int format, std::string buf);
+
+ /*
+ * \brief Read data from SPI bus peripheral.
+ *
+ * \param optional_header 0,1 or 2 bytes to write before buf.
+ * \param enables bitmask of peripheral to read. See usrp_spi_defs.h
+ * \param format transaction format. See usrp_spi_defs.h SPI_FMT_*
+ * \param len number of bytes to read. Must be in [0,64].
+ * \returns the data read if sucessful, else a zero length string.
+ *
+ * Reads are limited to a maximum of 64 bytes.
+ *
+ * If \p format specifies that optional_header bytes are present, they
+ * are written to the peripheral first. Then \p len bytes are read from
+ * the peripheral and returned.
+ */
+ std::string _read_spi (int optional_header, int enables, int format, int len);
+
+ /*!
+ * \brief Start data transfers.
+ * Called in base class to derived class order.
+ */
+ bool start ();
+
+ /*!
+ * \brief Stop data transfers.
+ * Called in base class to derived class order.
+ */
+ bool stop ();
+};
+
+\f/*!
+ * \brief class for accessing the receive side of the USRP
+ * \ingroup usrp
+ */
+class usrp_basic_rx : public usrp_basic
+{
+private:
+ fusb_devhandle *d_devhandle;
+ fusb_ephandle *d_ephandle;
+ int d_bytes_seen; // how many bytes we've seen
+ bool d_first_read;
+ bool d_rx_enable;
+
+protected:
+ /*!
+ * \param which_board Which USRP board on usb (not particularly useful; use 0)
+ * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
+ * Use zero for a reasonable default.
+ * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
+ * \param fpga_filename name of the rbf file to load
+ * \param firmware_filename name of ihx file to load
+ */
+ usrp_basic_rx (int which_board,
+ int fusb_block_size=0,
+ int fusb_nblocks=0,
+ const std::string fpga_filename = "",
+ const std::string firmware_filename = ""
+ ); // throws if trouble
+
+ bool set_rx_enable (bool on);
+ bool rx_enable () const { return d_rx_enable; }
+
+ bool disable_rx (); // conditional disable, return prev state
+ void restore_rx (bool on); // conditional set
+
+ void probe_rx_slots (bool verbose);
+
+public:
+ ~usrp_basic_rx ();
+
+ /*!
+ * \brief invokes constructor, returns instance or 0 if trouble
+ *
+ * \param which_board Which USRP board on usb (not particularly useful; use 0)
+ * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
+ * Use zero for a reasonable default.
+ * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
+ * \param fpga_filename name of file that contains image to load into FPGA
+ * \param firmware_filename name of file that contains image to load into FX2
+ */
+ static usrp_basic_rx *make (int which_board,
+ int fusb_block_size=0,
+ int fusb_nblocks=0,
+ const std::string fpga_filename = "",
+ const std::string firmware_filename = ""
+ );
+
+ /*!
+ * \brief tell the fpga the rate rx samples are coming from the A/D's
+ *
+ * div = fpga_master_clock_freq () / sample_rate
+ *
+ * sample_rate is determined by a myriad of registers
+ * in the 9862. That's why you have to tell us, so
+ * we can tell the fpga.
+ */
+ bool set_fpga_rx_sample_rate_divisor (unsigned int div);
+
+ /*!
+ * \brief read data from the D/A's via the FPGA.
+ * \p len must be a multiple of 512 bytes.
+ *
+ * \returns the number of bytes read, or -1 on error.
+ *
+ * If overrun is non-NULL it will be set true iff an RX overrun is detected.
+ */
+ int read (void *buf, int len, bool *overrun);
+
+
+ //! sampling rate of A/D converter
+ virtual long converter_rate() const { return fpga_master_clock_freq(); } // 64M
+ long adc_rate() const { return converter_rate(); }
+ int daughterboard_id (int which_side) const { return d_dbid[which_side & 0x1]; }
+
+ bool set_pga (int which_amp, double gain_in_db);
+ double pga (int which_amp) const;
+ double pga_min () const;
+ double pga_max () const;
+ double pga_db_per_step () const;
+
+ bool _write_oe (int which_side, int value, int mask);
+ bool write_io (int which_side, int value, int mask);
+ bool read_io (int which_side, int *value);
+ int read_io (int which_side);
+ bool write_refclk(int which_side, int value);
+ bool write_atr_mask(int which_side, int value);
+ bool write_atr_txval(int which_side, int value);
+ bool write_atr_rxval(int which_side, int value);
+
+ bool write_aux_dac (int which_side, int which_dac, int value);
+ bool read_aux_adc (int which_side, int which_adc, int *value);
+ int read_aux_adc (int which_side, int which_adc);
+
+ int block_size() const;
+
+ // called in base class to derived class order
+ bool start ();
+ bool stop ();
+};
+
+\f/*!
+ * \brief class for accessing the transmit side of the USRP
+ * \ingroup usrp
+ */
+class usrp_basic_tx : public usrp_basic
+{
+private:
+ fusb_devhandle *d_devhandle;
+ fusb_ephandle *d_ephandle;
+ int d_bytes_seen; // how many bytes we've seen
+ bool d_first_write;
+ bool d_tx_enable;
+
+ protected:
+ /*!
+ * \param which_board Which USRP board on usb (not particularly useful; use 0)
+ * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
+ * Use zero for a reasonable default.
+ * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
+ * \param fpga_filename name of file that contains image to load into FPGA
+ * \param firmware_filename name of file that contains image to load into FX2
+ */
+ usrp_basic_tx (int which_board,
+ int fusb_block_size=0,
+ int fusb_nblocks=0,
+ const std::string fpga_filename = "",
+ const std::string firmware_filename = ""
+ ); // throws if trouble
+
+ bool set_tx_enable (bool on);
+ bool tx_enable () const { return d_tx_enable; }
+
+ bool disable_tx (); // conditional disable, return prev state
+ void restore_tx (bool on); // conditional set
+
+ void probe_tx_slots (bool verbose);
+
+public:
+
+ ~usrp_basic_tx ();
+
+ /*!
+ * \brief invokes constructor, returns instance or 0 if trouble
+ *
+ * \param which_board Which USRP board on usb (not particularly useful; use 0)
+ * \param fusb_block_size fast usb xfer block size. Must be a multiple of 512.
+ * Use zero for a reasonable default.
+ * \param fusb_nblocks number of fast usb URBs to allocate. Use zero for a reasonable default.
+ * \param fpga_filename name of file that contains image to load into FPGA
+ * \param firmware_filename name of file that contains image to load into FX2
+ */
+ static usrp_basic_tx *make (int which_board, int fusb_block_size=0, int fusb_nblocks=0,
+ const std::string fpga_filename = "",
+ const std::string firmware_filename = ""
+ );
+
+ /*!
+ * \brief tell the fpga the rate tx samples are going to the D/A's
+ *
+ * div = fpga_master_clock_freq () * 2
+ *
+ * sample_rate is determined by a myriad of registers
+ * in the 9862. That's why you have to tell us, so
+ * we can tell the fpga.
+ */
+ bool set_fpga_tx_sample_rate_divisor (unsigned int div);
+
+ /*!
+ * \brief Write data to the A/D's via the FPGA.
+ *
+ * \p len must be a multiple of 512 bytes.
+ * \returns number of bytes written or -1 on error.
+ *
+ * if \p underrun is non-NULL, it will be set to true iff
+ * a transmit underrun condition is detected.
+ */
+ int write (const void *buf, int len, bool *underrun);
+
+ /*
+ * Block until all outstanding writes have completed.
+ * This is typically used to assist with benchmarking
+ */
+ void wait_for_completion ();
+
+ //! sampling rate of D/A converter
+ virtual long converter_rate() const { return fpga_master_clock_freq () * 2; } // 128M
+ long dac_rate() const { return converter_rate(); }
+ int daughterboard_id (int which_side) const { return d_dbid[which_side & 0x1]; }
+
+ bool set_pga (int which_amp, double gain_in_db);
+ double pga (int which_amp) const;
+ double pga_min () const;
+ double pga_max () const;
+ double pga_db_per_step () const;
+
+ bool _write_oe (int which_side, int value, int mask);
+ bool write_io (int which_side, int value, int mask);
+ bool read_io (int which_side, int *value);
+ int read_io (int which_side);
+ bool write_refclk(int which_side, int value);
+ bool write_atr_mask(int which_side, int value);
+ bool write_atr_txval(int which_side, int value);
+ bool write_atr_rxval(int which_side, int value);
+
+ bool write_aux_dac (int which_side, int which_dac, int value);
+ bool read_aux_adc (int which_side, int which_adc, int *value);
+ int read_aux_adc (int which_side, int which_adc);
+
+ int block_size() const;
+
+ // called in base class to derived class order
+ bool start ();
+ bool stop ();
+};
+
+#endif
+++ /dev/null
-/* -*- c++ -*- */
-/*
- * Copyright 2003,2004,2006,2009 Free Software Foundation, Inc.
- *
- * This file is part of GNU Radio
- *
- * GNU Radio is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 3, or (at your option)
- * any later version.
- *
- * GNU Radio is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with GNU Radio; see the file COPYING. If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
- * Low level primitives for directly messing with USRP hardware.
- *
- * If you're trying to use the USRP, you'll probably want to take a look
- * at the usrp_rx and usrp_tx classes. They hide a bunch of low level details
- * and provide high performance streaming i/o.
- *
- * This interface is built on top of libusb, which allegedly works under
- * Linux, *BSD and Mac OS/X. http://libusb.sourceforge.net
- */
-
-#ifndef _USRP_PRIMS_H_
-#define _USRP_PRIMS_H_
-
-#include <usrp/usrp_slots.h>
-#include <string>
-
-static const int USRP_HASH_SIZE = 16;
-
-enum usrp_load_status_t { ULS_ERROR = 0, ULS_OK, ULS_ALREADY_LOADED };
-
-#if 1
-struct usb_dev_handle;
-struct usb_device;
-typedef struct usb_dev_handle libusb_device_handle;
-typedef struct usb_device libusb_device;
-#else
-struct libusb_device_handle;
-struct libusb_device;
-#endif
-
-struct libusb_context;
-
-/*!
- * \brief initialize libusb; probe busses and devices.
- * If new_context is set to true, initiate and returns new libusb_context.
- * If new_context is set to false, intiate default context if not already
- * initiated and return NULL. It is NOT safe to call more than once with
- * new_context set to true since a new context is initiated each time.
- */
-libusb_context* usrp_one_time_init (bool new_context);
-
-void usrp_one_time_init ();
-
-/*
- * force a rescan of the buses and devices
- */
-void usrp_rescan ();
-
-/*!
- * \brief locate Nth (zero based) USRP device in system.
- * Return pointer or 0 if not found.
- *
- * The following kinds of devices are considered USRPs:
- *
- * unconfigured USRP (no firwmare loaded)
- * configured USRP (firmware loaded)
- * unconfigured Cypress FX2 (only if fx2_ok_p is true)
- */
-libusb_device *usrp_find_device (int nth, bool fx2_ok_p = false, libusb_context *ctx = NULL);
-
-bool usrp_usrp_p (libusb_device *q); //< is this a USRP
-bool usrp_usrp0_p (libusb_device *q); //< is this a USRP Rev 0
-bool usrp_usrp1_p (libusb_device *q); //< is this a USRP Rev 1
-bool usrp_usrp2_p (libusb_device *q); //< is this a USRP Rev 2
-int usrp_hw_rev (libusb_device *q); //< return h/w rev code
-
-bool usrp_fx2_p (libusb_device *q); //< is this an unconfigured Cypress FX2
-
-bool usrp_unconfigured_usrp_p (libusb_device *q); //< some kind of unconfigured USRP
-bool usrp_configured_usrp_p (libusb_device *q); //< some kind of configured USRP
-
-/*!
- * \brief given a libusb_device return an instance of the appropriate libusb_device_handle
- *
- * These routines claim the specified interface and select the
- * correct alternate interface. (USB nomenclature is totally screwed!)
- *
- * If interface can't be opened, or is already claimed by some other
- * process, 0 is returned.
- */
-libusb_device_handle *usrp_open_cmd_interface (libusb_device *dev);
-libusb_device_handle *usrp_open_rx_interface (libusb_device *dev);
-libusb_device_handle *usrp_open_tx_interface (libusb_device *dev);
-
-/*!
- * \brief close interface.
- */
-bool usrp_close_interface (libusb_device_handle *udh);
-
-/*!
- * \brief load intel hex format file into USRP/Cypress FX2 (8051).
- *
- * The filename extension is typically *.ihx
- *
- * Note that loading firmware may cause the device to renumerate. I.e.,
- * change its configuration, invalidating the current device handle.
- */
-
-usrp_load_status_t
-usrp_load_firmware (libusb_device_handle *udh, const char *filename, bool force);
-
-/*!
- * \brief load intel hex format file into USRP FX2 (8051).
- *
- * The filename extension is typically *.ihx
- *
- * Note that loading firmware may cause the device to renumerate. I.e.,
- * change its configuration, invalidating the current device handle.
- * If the result is ULS_OK, usrp_load_firmware_nth delays 1 second
- * then rescans the busses and devices.
- */
-usrp_load_status_t
-usrp_load_firmware_nth (int nth, const char *filename, bool force, libusb_context *ctx = NULL);
-
-/*!
- * \brief load fpga configuration bitstream
- */
-usrp_load_status_t
-usrp_load_fpga (libusb_device_handle *udh, const char *filename, bool force);
-
-/*!
- * \brief load the regular firmware and fpga bitstream in the Nth USRP.
- *
- * This is the normal starting point...
- */
-bool usrp_load_standard_bits (int nth, bool force,
- const std::string fpga_filename = "",
- const std::string firmware_filename = "",
- libusb_context *ctx = NULL);
-
-/*!
- * \brief copy the given \p hash into the USRP hash slot \p which.
- * The usrp implements two hash slots, 0 and 1.
- */
-bool usrp_set_hash (libusb_device_handle *udh, int which,
- const unsigned char hash[USRP_HASH_SIZE]);
-
-/*!
- * \brief retrieve the \p hash from the USRP hash slot \p which.
- * The usrp implements two hash slots, 0 and 1.
- */
-bool usrp_get_hash (libusb_device_handle *udh, int which,
- unsigned char hash[USRP_HASH_SIZE]);
-
-bool usrp_write_fpga_reg (libusb_device_handle *udh, int reg, int value);
-bool usrp_read_fpga_reg (libusb_device_handle *udh, int reg, int *value);
-bool usrp_set_fpga_reset (libusb_device_handle *udh, bool on);
-bool usrp_set_fpga_tx_enable (libusb_device_handle *udh, bool on);
-bool usrp_set_fpga_rx_enable (libusb_device_handle *udh, bool on);
-bool usrp_set_fpga_tx_reset (libusb_device_handle *udh, bool on);
-bool usrp_set_fpga_rx_reset (libusb_device_handle *udh, bool on);
-bool usrp_set_led (libusb_device_handle *udh, int which, bool on);
-
-bool usrp_check_rx_overrun (libusb_device_handle *udh, bool *overrun_p);
-bool usrp_check_tx_underrun (libusb_device_handle *udh, bool *underrun_p);
-
-// i2c_read and i2c_write are limited to a maximum len of 64 bytes.
-
-bool usrp_i2c_write (libusb_device_handle *udh, int i2c_addr,
- const void *buf, int len);
-
-bool usrp_i2c_read (libusb_device_handle *udh, int i2c_addr,
- void *buf, int len);
-
-// spi_read and spi_write are limited to a maximum of 64 bytes
-// See usrp_spi_defs.h for more info
-
-bool usrp_spi_write (libusb_device_handle *udh,
- int optional_header, int enables, int format,
- const void *buf, int len);
-
-bool usrp_spi_read (libusb_device_handle *udh,
- int optional_header, int enables, int format,
- void *buf, int len);
-
-
-bool usrp_9862_write (libusb_device_handle *udh,
- int which_codec, // [0, 1]
- int regno, // [0, 63]
- int value); // [0, 255]
-
-bool usrp_9862_read (libusb_device_handle *udh,
- int which_codec, // [0, 1]
- int regno, // [0, 63]
- unsigned char *value); // [0, 255]
-
-/*!
- * \brief Write multiple 9862 regs at once.
- *
- * \p buf contains alternating register_number, register_value pairs.
- * \p len must be even and is the length of buf in bytes.
- */
-bool usrp_9862_write_many (libusb_device_handle *udh, int which_codec,
- const unsigned char *buf, int len);
-
-
-/*!
- * \brief write specified regs to all 9862's in the system
- */
-bool usrp_9862_write_many_all (libusb_device_handle *udh,
- const unsigned char *buf, int len);
-
-
-// Write 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
-// Which EEPROM is determined by i2c_addr. See i2c_addr.h
-
-bool usrp_eeprom_write (libusb_device_handle *udh, int i2c_addr,
- int eeprom_offset, const void *buf, int len);
-
-
-// Read 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
-// Which EEPROM is determined by i2c_addr. See i2c_addr.h
-
-bool usrp_eeprom_read (libusb_device_handle *udh, int i2c_addr,
- int eeprom_offset, void *buf, int len);
-
-
-// Slot specific i/o routines
-
-/*!
- * \brief write to the specified aux dac.
- *
- * \p slot: which Tx or Rx slot to write.
- * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's
- * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's
- *
- * \p which_dac: [0,3] RX slots must use only 0 and 1.
- * TX slots must use only 2 and 3.
- *
- * AUX DAC 3 is really the 9862 sigma delta output.
- *
- * \p value to write to aux dac. All dacs take straight
- * binary values. Although dacs 0, 1 and 2 are 8-bit and dac 3 is 12-bit,
- * the interface is in terms of 12-bit values [0,4095]
- */
-bool usrp_write_aux_dac (libusb_device_handle *uhd, int slot,
- int which_dac, int value);
-
-/*!
- * \brief Read the specified aux adc
- *
- * \p slot: which Tx or Rx slot to read aux dac
- * \p which_adc: [0,1] which of the two adcs to read
- * \p *value: return value, 12-bit straight binary.
- */
-bool usrp_read_aux_adc (libusb_device_handle *udh, int slot,
- int which_adc, int *value);
-
-
-/*!
- * \brief usrp daughterboard id to name mapping
- */
-const std::string usrp_dbid_to_string (int dbid);
-
-
-enum usrp_dbeeprom_status_t { UDBE_OK, UDBE_BAD_SLOT, UDBE_NO_EEPROM, UDBE_INVALID_EEPROM };
-
-struct usrp_dboard_eeprom {
- unsigned short id; // d'board identifier code
- unsigned short oe; // fpga output enables:
- // If bit set, i/o pin is an output from FPGA.
- short offset[2]; // ADC/DAC offset correction
-};
-
-/*!
- * \brief Read and return parsed daughterboard eeprom
- */
-usrp_dbeeprom_status_t
-usrp_read_dboard_eeprom (libusb_device_handle *udh,
- int slot_id, usrp_dboard_eeprom *eeprom);
-
-/*!
- * \brief write ADC/DAC offset calibration constants to d'board eeprom
- */
-bool usrp_write_dboard_offsets (libusb_device_handle *udh, int slot_id,
- short offset0, short offset1);
-
-/*!
- * \brief return a usrp's serial number.
- *
- * Note that this only works on a configured usrp.
- * \returns non-zero length string iff successful.
- */
-std::string usrp_serial_number(libusb_device_handle *udh);
-
-#endif /* _USRP_PRIMS_H_ */
--- /dev/null
+struct libusb_context;
+
+static const int USRP_HASH_SIZE = 16;
+
+enum usrp_load_status_t { ULS_ERROR = 0, ULS_OK, ULS_ALREADY_LOADED };
+
+/*!
+ * \brief initialize libusb; probe busses and devices.
+ * If new_context is set to true, initiate and returns new libusb_context.
+ * If new_context is set to false, intiate default context if not already
+ * initiated and return NULL. It is NOT safe to call more than once with
+ * new_context set to true since a new context is initiated each time.
+ */
+libusb_context* usrp_one_time_init (bool new_context);
+
+void usrp_one_time_init ();
+
+/*
+ * force a rescan of the buses and devices
+ */
+void usrp_rescan ();
+
+/*!
+ * \brief locate Nth (zero based) USRP device in system.
+ * Return pointer or 0 if not found.
+ *
+ * The following kinds of devices are considered USRPs:
+ *
+ * unconfigured USRP (no firwmare loaded)
+ * configured USRP (firmware loaded)
+ * unconfigured Cypress FX2 (only if fx2_ok_p is true)
+ */
+libusb_device *usrp_find_device (int nth, bool fx2_ok_p = false, libusb_context *ctx = NULL);
+
+bool usrp_usrp_p (libusb_device *q); //< is this a USRP
+bool usrp_usrp0_p (libusb_device *q); //< is this a USRP Rev 0
+bool usrp_usrp1_p (libusb_device *q); //< is this a USRP Rev 1
+bool usrp_usrp2_p (libusb_device *q); //< is this a USRP Rev 2
+int usrp_hw_rev (libusb_device *q); //< return h/w rev code
+
+bool usrp_fx2_p (libusb_device *q); //< is this an unconfigured Cypress FX2
+
+bool usrp_unconfigured_usrp_p (libusb_device *q); //< some kind of unconfigured USRP
+bool usrp_configured_usrp_p (libusb_device *q); //< some kind of configured USRP
+
+/*!
+ * \brief given a libusb_device return an instance of the appropriate libusb_device_handle
+ *
+ * These routines claim the specified interface and select the
+ * correct alternate interface. (USB nomenclature is totally screwed!)
+ *
+ * If interface can't be opened, or is already claimed by some other
+ * process, 0 is returned.
+ */
+libusb_device_handle *usrp_open_cmd_interface (libusb_device *dev);
+libusb_device_handle *usrp_open_rx_interface (libusb_device *dev);
+libusb_device_handle *usrp_open_tx_interface (libusb_device *dev);
+
+/*!
+ * \brief close interface.
+ */
+bool usrp_close_interface (libusb_device_handle *udh);
+
+/*!
+ * \brief load intel hex format file into USRP/Cypress FX2 (8051).
+ *
+ * The filename extension is typically *.ihx
+ *
+ * Note that loading firmware may cause the device to renumerate. I.e.,
+ * change its configuration, invalidating the current device handle.
+ */
+
+usrp_load_status_t
+usrp_load_firmware (libusb_device_handle *udh, const char *filename, bool force);
+
+/*!
+ * \brief load intel hex format file into USRP FX2 (8051).
+ *
+ * The filename extension is typically *.ihx
+ *
+ * Note that loading firmware may cause the device to renumerate. I.e.,
+ * change its configuration, invalidating the current device handle.
+ * If the result is ULS_OK, usrp_load_firmware_nth delays 1 second
+ * then rescans the busses and devices.
+ */
+usrp_load_status_t
+usrp_load_firmware_nth (int nth, const char *filename, bool force, libusb_context *ctx = NULL);
+
+/*!
+ * \brief load fpga configuration bitstream
+ */
+usrp_load_status_t
+usrp_load_fpga (libusb_device_handle *udh, const char *filename, bool force);
+
+/*!
+ * \brief load the regular firmware and fpga bitstream in the Nth USRP.
+ *
+ * This is the normal starting point...
+ */
+bool usrp_load_standard_bits (int nth, bool force,
+ const std::string fpga_filename = "",
+ const std::string firmware_filename = "",
+ libusb_context *ctx = NULL);
+
+/*!
+ * \brief copy the given \p hash into the USRP hash slot \p which.
+ * The usrp implements two hash slots, 0 and 1.
+ */
+bool usrp_set_hash (libusb_device_handle *udh, int which,
+ const unsigned char hash[USRP_HASH_SIZE]);
+
+/*!
+ * \brief retrieve the \p hash from the USRP hash slot \p which.
+ * The usrp implements two hash slots, 0 and 1.
+ */
+bool usrp_get_hash (libusb_device_handle *udh, int which,
+ unsigned char hash[USRP_HASH_SIZE]);
+
+bool usrp_write_fpga_reg (libusb_device_handle *udh, int reg, int value);
+bool usrp_read_fpga_reg (libusb_device_handle *udh, int reg, int *value);
+bool usrp_set_fpga_reset (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_tx_enable (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_rx_enable (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_tx_reset (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_rx_reset (libusb_device_handle *udh, bool on);
+bool usrp_set_led (libusb_device_handle *udh, int which, bool on);
+
+bool usrp_check_rx_overrun (libusb_device_handle *udh, bool *overrun_p);
+bool usrp_check_tx_underrun (libusb_device_handle *udh, bool *underrun_p);
+
+// i2c_read and i2c_write are limited to a maximum len of 64 bytes.
+
+bool usrp_i2c_write (libusb_device_handle *udh, int i2c_addr,
+ const void *buf, int len);
+
+bool usrp_i2c_read (libusb_device_handle *udh, int i2c_addr,
+ void *buf, int len);
+
+// spi_read and spi_write are limited to a maximum of 64 bytes
+// See usrp_spi_defs.h for more info
+
+bool usrp_spi_write (libusb_device_handle *udh,
+ int optional_header, int enables, int format,
+ const void *buf, int len);
+
+bool usrp_spi_read (libusb_device_handle *udh,
+ int optional_header, int enables, int format,
+ void *buf, int len);
+
+
+bool usrp_9862_write (libusb_device_handle *udh,
+ int which_codec, // [0, 1]
+ int regno, // [0, 63]
+ int value); // [0, 255]
+
+bool usrp_9862_read (libusb_device_handle *udh,
+ int which_codec, // [0, 1]
+ int regno, // [0, 63]
+ unsigned char *value); // [0, 255]
+
+/*!
+ * \brief Write multiple 9862 regs at once.
+ *
+ * \p buf contains alternating register_number, register_value pairs.
+ * \p len must be even and is the length of buf in bytes.
+ */
+bool usrp_9862_write_many (libusb_device_handle *udh, int which_codec,
+ const unsigned char *buf, int len);
+
+
+/*!
+ * \brief write specified regs to all 9862's in the system
+ */
+bool usrp_9862_write_many_all (libusb_device_handle *udh,
+ const unsigned char *buf, int len);
+
+
+// Write 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
+// Which EEPROM is determined by i2c_addr. See i2c_addr.h
+
+bool usrp_eeprom_write (libusb_device_handle *udh, int i2c_addr,
+ int eeprom_offset, const void *buf, int len);
+
+
+// Read 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
+// Which EEPROM is determined by i2c_addr. See i2c_addr.h
+
+bool usrp_eeprom_read (libusb_device_handle *udh, int i2c_addr,
+ int eeprom_offset, void *buf, int len);
+
+
+// Slot specific i/o routines
+
+/*!
+ * \brief write to the specified aux dac.
+ *
+ * \p slot: which Tx or Rx slot to write.
+ * N.B., SLOT_TX_A and SLOT_RX_A share the same AUX DAC's
+ * SLOT_TX_B and SLOT_RX_B share the same AUX DAC's
+ *
+ * \p which_dac: [0,3] RX slots must use only 0 and 1.
+ * TX slots must use only 2 and 3.
+ *
+ * AUX DAC 3 is really the 9862 sigma delta output.
+ *
+ * \p value to write to aux dac. All dacs take straight
+ * binary values. Although dacs 0, 1 and 2 are 8-bit and dac 3 is 12-bit,
+ * the interface is in terms of 12-bit values [0,4095]
+ */
+bool usrp_write_aux_dac (libusb_device_handle *uhd, int slot,
+ int which_dac, int value);
+
+/*!
+ * \brief Read the specified aux adc
+ *
+ * \p slot: which Tx or Rx slot to read aux dac
+ * \p which_adc: [0,1] which of the two adcs to read
+ * \p *value: return value, 12-bit straight binary.
+ */
+bool usrp_read_aux_adc (libusb_device_handle *udh, int slot,
+ int which_adc, int *value);
+
+
+/*!
+ * \brief usrp daughterboard id to name mapping
+ */
+const std::string usrp_dbid_to_string (int dbid);
+
+
+enum usrp_dbeeprom_status_t { UDBE_OK, UDBE_BAD_SLOT, UDBE_NO_EEPROM, UDBE_INVALID_EEPROM };
+
+struct usrp_dboard_eeprom {
+ unsigned short id; // d'board identifier code
+ unsigned short oe; // fpga output enables:
+ // If bit set, i/o pin is an output from FPGA.
+ short offset[2]; // ADC/DAC offset correction
+};
+
+/*!
+ * \brief Read and return parsed daughterboard eeprom
+ */
+usrp_dbeeprom_status_t
+usrp_read_dboard_eeprom (libusb_device_handle *udh,
+ int slot_id, usrp_dboard_eeprom *eeprom);
+
+/*!
+ * \brief write ADC/DAC offset calibration constants to d'board eeprom
+ */
+bool usrp_write_dboard_offsets (libusb_device_handle *udh, int slot_id,
+ short offset0, short offset1);
+
+/*!
+ * \brief return a usrp's serial number.
+ *
+ * Note that this only works on a configured usrp.
+ * \returns non-zero length string iff successful.
+ */
+std::string usrp_serial_number(libusb_device_handle *udh);
+
+/*
+ * Static helper functions
+ */
+
+bool _usrp_configured_p (libusb_device *q);
+libusb_device_handle *usrp_open_interface(libusb_device *dev,
+ int interface,
+ int altinterface);
+bool write_internal_ram (libusb_device_handle *udh, unsigned char *buf,
+ int start_addr, size_t len);
+int write_cmd (libusb_device_handle *udh, int request, int value,
+ int index, unsigned char *bytes, int len);
+bool usrp_usrp_p (libusb_device *q);
+int usrp_hw_rev (libusb_device *q);
+bool our_nanosleep (const struct timespec *delay);
+const char *get_proto_filename (const std::string user_filename,
+ const char *env_var,
+ const char *def);
+char *find_file (const char *filename, int hw_rev);
+void load_status_msg (usrp_load_status_t s, const char *type,
+ const char *filename);
+bool usrp1_fpga_write (libusb_device_handle *udh, int regno, int value);
+bool usrp1_fpga_read (libusb_device_handle *udh, int regno, int *value);
+bool usrp_set_switch (libusb_device_handle *udh, int cmd_byte, bool on);
+
+bool usrp_set_fpga_reset (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_tx_enable (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_rx_enable (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_tx_reset (libusb_device_handle *udh, bool on);
+bool usrp_set_fpga_rx_reset (libusb_device_handle *udh, bool on);
+
+#endif /* _USRP_PRIMS_H_ */
#ifndef _FUSB_H_
#define _FUSB_H_
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
-#if 1
+#ifdef HAVE_LIBUSB_1
+struct libusb_device_handle;
+#else
struct usb_dev_handle;
typedef struct usb_dev_handle libusb_device_handle;
-#else
-struct libusb_device_handle;
#endif
struct libusb_context;
#include "config.h"
#endif
-#include <usrp/usrp_basic.h>
+#include "usrp/usrp_basic.h"
#include "usrp/usrp_prims.h"
#include "usrp_interfaces.h"
#include "fpga_regs_common.h"
#include <string.h>
#include <cstdio>
-#if 1
-#include <usb.h>
-#else
+#ifdef HAVE_LIBUSB_1
#include <libusb-1.0/libusb.h>
+#else
+#include <usb.h>
#endif
using namespace ad9862;
#include <string.h>
#include <cstdio>
-
using namespace ad9862;
#define NELEM(x) (sizeof (x) / sizeof (x[0]))
#include <ad9862.h>
#include <assert.h>
-#if 1
-#include <usb.h>
-#else
+#ifdef HAVE_LIBUSB_1
#include <libusb-1.0/libusb.h>
+#else
+#include <usb.h>
#endif
extern "C" {
static const char *default_firmware_filename = "std.ihx";
static const char *default_fpga_filename = "std_2rxhb_2tx.rbf";
-/*
- * Forward Declarations
- */
-
-bool _usrp_configured_p (libusb_device *q);
-libusb_device_handle *usrp_open_interface(libusb_device *dev,
- int interface,
- int altinterface);
-bool write_internal_ram (libusb_device_handle *udh, unsigned char *buf,
- int start_addr, size_t len);
-int write_cmd (libusb_device_handle *udh, int request, int value,
- int index, unsigned char *bytes, int len);
#include "std_paths.h"
#include <stdio.h>
using namespace ad9862;
-/*
- * Forward Declarations
- */
-
-bool our_nanosleep (const struct timespec *delay);
-const char *get_proto_filename (const std::string user_filename,
- const char *env_var,
- const char *def);
-char *find_file (const char *filename, int hw_rev);
-void load_status_msg (usrp_load_status_t s, const char *type,
- const char *filename);
-bool usrp1_fpga_write (libusb_device_handle *udh, int regno, int value);
-bool usrp1_fpga_read (libusb_device_handle *udh, int regno, int *value);
-bool usrp_set_switch (libusb_device_handle *udh, int cmd_byte, bool on);
-
-bool usrp_set_fpga_reset (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_tx_enable (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_rx_enable (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_tx_reset (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_rx_reset (struct usb_dev_handle *udh, bool on);
-
-
-
static const int FIRMWARE_HASH_SLOT = 0;
static const int FPGA_HASH_SLOT = 1;
/*
* q must be a real USRP, not an FX2. Return true if it's configured.
*/
-static bool
+bool
_usrp_configured_p (struct usb_device *q)
{
return (q->descriptor.bcdDevice & 0xFF00) != 0;
using namespace ad9862;
-bool our_nanosleep (const struct timespec *delay);
-const char *get_proto_filename (const std::string user_filename,
- const char *env_var,
- const char *def);
-char *find_file (const char *filename, int hw_rev);
-void load_status_msg (usrp_load_status_t s, const char *type,
- const char *filename);
-bool usrp1_fpga_write (libusb_device_handle *udh, int regno, int value);
-bool usrp1_fpga_read (libusb_device_handle *udh, int regno, int *value);
-bool usrp_set_switch (libusb_device_handle *udh, int cmd_byte, bool on);
-
-bool usrp_set_fpga_reset (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_tx_enable (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_rx_enable (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_tx_reset (struct usb_dev_handle *udh, bool on);
-bool usrp_set_fpga_rx_reset (struct usb_dev_handle *udh, bool on);
-
-
static const int FIRMWARE_HASH_SLOT = 0;
static const int FPGA_HASH_SLOT = 1;
/*
* q must be a real USRP, not an FX2. Return true if it's configured.
*/
-static bool
+bool
_usrp_configured_p (struct libusb_device *q)
{
struct libusb_device_descriptor desc;
projects / debian / gnuradio / commitdiff