/*
* $Id: amandates.c,v 1.21 2006/07/25 18:35:21 martinea Exp $
*
- * manage amandates file, that mimics /etc/dumpdates, but stores
+ * manage amandates file, that mimics /var/lib/dumpdates, but stores
* GNUTAR dates
*/
devname = amname_to_devname(amdp->name);
- if((dumpdf = fopen("/etc/dumpdates", "r")) == NULL) {
+ if((dumpdf = fopen("/var/lib/dumpdates", "r")) == NULL) {
amfree(devname);
return;
}
check_file(COMPRESS_PATH, X_OK);
if (need_dump || need_xfsdump ) {
- if (check_file_exist("/etc/dumpdates")) {
- check_file("/etc/dumpdates",
+ if (check_file_exist("/var/lib/dumpdates")) {
+ check_file("/var/lib/dumpdates",
#ifdef USE_RUNDUMP
F_OK
#else
} else {
#ifndef USE_RUNDUMP
if (access("/etc", R_OK|W_OK) == -1) {
- g_printf(_("ERROR [dump will not be able to create the /etc/dumpdates file: %s]\n"), strerror(errno));
+ g_printf(_("ERROR [dump will not be able to create the /var/lib/dumpdates file: %s]\n"), strerror(errno));
}
#endif
}
}
if (need_vdump) {
- if (check_file_exist("/etc/vdumpdates")) {
- check_file("/etc/vdumpdates", F_OK);
+ if (check_file_exist("/var/lib/vdumpdates")) {
+ check_file("/var/lib/vdumpdates", F_OK);
}
}
check_space(AMANDA_DBGDIR, (off_t)64); /* for amandad i/o */
#endif
+ check_space("/var/lib", (off_t)64); /* for /var/lib/dumpdates writing */
check_space("/etc", (off_t)64); /* for /etc/dumpdates writing */
}
}
if (did_glib_init) return;
did_glib_init = TRUE;
- /* set up libcurl (this must happen before threading
- * is initialized) */
+ /* set up libcurl */
#ifdef HAVE_LIBCURL
# ifdef G_THREADS_ENABLED
# if (GLIB_MAJOR_VERSION < 2 || (GLIB_MAJOR_VERSION == 2 && GLIB_MINOR_VERSION < 31))
--- /dev/null
+amanda (1:3.3.0-1) unstable; urgency=low
+
+ As of version 3.3.0, Amanda now uses bsdtcp as the default auth method,
+ and the package postinst scripts install a suitable inetd entry.
+
+ You may need to update existing amanda.conf files to reflect this change,
+ as such configs are often hand-crafted to meet site expectations.
+
+ You may also need to adjust inetd or xinetd configs to include both bsd
+ and bsdtcp auth methods if circumstances mandate keeping auth method bsd
+ active in your environment.
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 13 Sep 2011 12:36:08 -0600
--- /dev/null
+.TH ACTIVATE-DEVPAY 1
+.SH NAME
+activate-devpay \- create the token and certificate files for Amazon S3
+.SH SYNOPSIS
+.B activate-devpay
+.SH "DESCRIPTION"
+This program creates the token and certificate files for Amazon Devpay's
+Simple Token Service (STS). You can then use those files with the S3 device.
+
+This manual page was written for the Debian GNU/Linux distribution
+because the original program does not have a manual page.
+
+.SH AUTHOR
+This manual page was written by Bdale Garbee <bdale@gag.com>,
+for the Debian GNU/Linux system (but may be used by others).
--- /dev/null
+Notes on making amanda-client work on a Debian system
+
+To get indexing (or specifically amrecover) to work right two things need
+to be done:
+
+1. If you're using tcpd, make sure to edit the server's /etc/hosts.allow and
+ allow all client machines into the daemon amandad
+
+2. Edit the server(s) ~backup/.amandahosts and add an entry like:
+ "<client_hostname> root"
+
+As always: for more complex setups consult the manpages and available
+documentation in /usr/share/doc/amanda-common ;-)
+
--- /dev/null
+usr/share/doc/amanda-client/examples
+usr/share/lintian/overrides
+var/lib/amanda/gnutar-lists
--- /dev/null
+example/amanda-client.conf
+example/amanda-client-postgresql.conf
+example/inetd.conf.amandaclient
+example/xinetd.amandaclient
--- /dev/null
+usr/lib/amanda/amandad
+usr/lib/amanda/application/*
+usr/lib/amanda/calcsize
+usr/lib/amanda/killpgrp
+usr/lib/amanda/patch-system
+usr/lib/amanda/rundump
+usr/lib/amanda/runtar
+usr/lib/amanda/selfcheck
+usr/lib/amanda/sendbackup
+usr/lib/amanda/sendsize
+usr/sbin/amfetchdump
+usr/sbin/amoldrecover
+usr/sbin/amrecover
+usr/sbin/amrestore
+usr/share/man/man5/amanda-client.conf.5.gz
+usr/share/man/man7/amanda-applications.7.gz
+usr/share/man/man8/amfetchdump.8.gz
+usr/share/man/man8/amrecover.8.gz
+usr/share/man/man8/amrestore.8.gz
--- /dev/null
+amanda-client: setuid-binary usr/lib/amanda/application/amgtar 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/application/amstar 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/calcsize 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/killpgrp 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/rundump 4754 root/backup
+amanda-client: setuid-binary usr/lib/amanda/runtar 4754 root/backup
+amanda-client: non-standard-dir-perm var/lib/amanda/ 0770 != 0755
+amanda-client: non-standard-dir-perm var/lib/amanda/gnutar-lists/ 0770 != 0755
+amanda-client: possible-gpl-code-linked-with-openssl
--- /dev/null
+debian/amoldrecover.8
--- /dev/null
+etc/xinetd.d
+usr/lib
+usr/share/doc/amanda-common/examples
+usr/share/lintian/overrides
--- /dev/null
+example/DLT.ps
+example/EXB-8500.ps
+example/HP-DAT.ps
+example/8.5x11.ps
+example/3hole.ps
+example/DLT-A4.ps
+example/DIN-A4.ps
--- /dev/null
+amanda-common: possible-gpl-code-linked-with-openssl
--- /dev/null
+#!/bin/sh -e
+
+. /usr/share/debconf/confmodule
+
+if [ "$1" = configure ]; then
+ if ! getent passwd backup; then
+ adduser --quiet --system --no-create-home --home /var/backups \
+ --shell /bin/sh --uid 34 --gid 34 backup
+ fi
+
+ if [ ! -f /var/backups/.profile ]; then
+ echo 'PATH="$PATH:/usr/sbin"' > /var/backups/.profile
+ fi
+
+ groupadd -f -g 34 backup
+ groupadd -f -g 26 tape
+
+ adduser backup disk
+ adduser backup tape
+
+ # in case we get installed first
+ if [ ! -d /var/lib/amanda ]; then
+ mkdir -p /var/lib/amanda
+ fi
+
+ # try to handle a /var/lib/amandates file, since we created it
+ # incorrectly in previous versions of the amanda packages for Debian
+ if [ -f /var/lib/amandates ]; then
+ if [ ! -f /var/lib/amanda/amandates ]; then
+ mv /var/lib/amandates /var/lib/amanda/amandates
+ fi
+ fi
+
+ # make sure amandates exists and has the right perms
+ if [ ! -f /var/lib/amanda/amandates ]; then
+ touch /var/lib/amanda/amandates
+ fi
+ chown backup:backup /var/lib/amanda/amandates
+
+ # make sure user backup has a home directory
+ if [ ! -d ~backup ]; then
+ mkdir -p ~backup
+ fi
+
+ # make sure there is a .amandahosts symlink
+ if [ ! -L ~backup/.amandahosts ]; then
+ ln -sf /etc/amandahosts ~backup/.amandahosts
+ fi
+
+ # make sure /var/log/amanda exists
+ if [ ! -d /var/log/amanda ]; then
+ mkdir -p /var/log/amanda
+ fi
+
+ chown backup:backup ~backup/.amandahosts /etc/amandahosts \
+ /var/log/amanda
+ chmod 600 ~backup/.amandahosts /etc/amandahosts
+ chmod 770 /var/log/amanda
+fi
+
+update-inetd --add "amanda stream tcp nowait backup /usr/lib/amanda/amandad amandad -auth=bsdtcp amdump amindexd amidxtaped"
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh -e
+case "$1" in
+ purge)
+ if [ -d /var/log/amanda ]; then
+ rm -rf /var/log/amanda
+ fi
+ if [ -d /var/lib/amanda-gnutar-lists ]; then
+ rm -rf /var/lib/amanda-gnutar-lists
+ fi
+ if [ -d /var/lib/amanda-index ]; then
+ rm -rf /var/lib/amanda-index
+ fi
+ if [ -d /var/lib/amanda ]; then
+ rm -rf /var/lib/amanda
+ fi
+ # keep this around to clean up after old, broken amanda packages
+ # new packages have amandates in /var/lib/amanda...
+ if [ -f /var/lib/amandates ]; then
+ rm -f /var/lib/amandates
+ fi
+
+ rm -f ~backup/.amandahosts
+
+ ;;
+ remove|upgrade|deconfigure)
+ ;;
+
+ failed-upgrade)
+ ;;
+
+ *)
+ echo "unknown argument --> $1" >&2
+ exit 0
+ ;;
+esac
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh -e
+
+# if a .amandahosts exists and is not a symlink, move it to /etc
+if [ ! -L ~backup/.amandahosts ]
+then
+ if [ -f ~backup/.amandahosts ]
+ then
+ mv -f ~backup/.amandahosts /etc/amandahosts
+ fi
+fi
+
+#DEBHELPER#
--- /dev/null
+#!/bin/sh -e
+
+update-inetd --remove "amanda"
+
+#DEBHELPER#
--- /dev/null
+amanda for DEBIAN
+-----------------
+
+Since every Amanda installation is different, there is some work you need to
+do to configure your server. For a simple setup, as root you need to:
+
+1. Create a directory under /etc/amanda for your backup config, we'll assume
+ a name 'DailySet1' as our example.
+
+ mkdir /etc/amanda/DailySet1
+
+ Make sure that /etc/amanda and all the files under it are owner and group
+ backup with directory permissions of 770 and file permissions of 660.
+
+2. populate this directory with config files. At a minimum, you need
+ amanda.conf and disklist.
+
+ cp /usr/share/doc/amanda-server/examples/amanda.conf \
+ /etc/amanda/DailySet1/amanda.conf*
+ cp /usr/share/doc/amanda-server/examples/disklist \
+ /etc/amanda/DailySet1/disklist
+
+ Edit these files as needed, following the instructions in each file.
+
+3. Make sure that /etc/amanda and all the files under it are owner and group
+ backup with directory permissions of 770 and file permissions of 660.
+
+ chown -R backup:backup /etc/amanda
+
+3. Prepare the "holding disk" if you plan to use one (highly recommended!) by
+ ensuring user backup can access it. See the note below indicating that it
+ may be better to use a subdirectory and not a mount point to avoid having
+ system artifacts like the lost+found directory confuse things.
+
+ chown -R backup:backup <holding disk location>
+
+4. Install a suitable crontab for user backup. If you used DailySet1 as your
+ configuration name, you can just install the provided example. If you
+ picked some other name, you will obviously need to edit a copy of the
+ example before installing it.
+
+ crontab -u backup /usr/share/doc/amanda-server/examples/crontab.amanda
+
+To use all of Amanda's features, you probably also want to put each client
+machine's root user in the .rhosts or .amandahosts for ~backup on the server
+machine. On Debian systems, this is usually linked to /etc/amandahosts, but
+if you have clients running other operating systems you'll have to find the
+right place yourself.
+
+NOTE: If you want to backup your server too, you need to treat it as both a
+client *and* a server, see /usr/share/doc/amanda-client/README.Debian for
+more information.
+
+For more complex setups, consult the manpages and the extra documents and
+example files in /usr/share/doc/amanda-common, or look at www.amanda.org on
+the web.
+
+Another Note: if you use floppy tapes you have to use the sftape interface
+for use with ftape(>=3.03).
+
+Jean Pierre LeJacq <jplejacq@mail.quoininc.com> reports the following about
+his experience using ftape:
+
+ I'm using ftape successfully with amanda but only after
+ struggling. The crucial trick was to set the block size with with ftmt to
+ be the same as used by amanda. I've implemented this with this entry in
+ /etc/modules.conf:
+
+ alias char-major-27 zftape
+ pre-install zftape /sbin/swapout 5
+ post-install zftape /bin/ftmt -f /dev/nzqft0 setblk 32768
+
+To ease use with firewalls, Amanda has been built with options restricting the
+use of TCP to the port range 50000-50100, and UDP to the port range 840-860.
+
+Sam Johnston <samj@samj.net> reported problems with an Amanda server on which
+bastille was used with the "restrict system resources" option. See bug
+118616 in the Debian bug tracking system for more information.
+
+If you choose to use the SSH authentication method and associated transport,
+please be aware that there may be problems if /usr/lib/amanda/dumper is suid.
+You can fix this on your server with chmod u-s /usr/lib/amanda/dumper, or
+investigate dpkg-statoverride.
+
+Concerns have been expressed about the reliability of 'dump' as a backup tool
+on live Linux systems. Nothing can guarantee a consistent and meaningful
+backup of a live filesystem under all circumstances, and the maintainer of
+these packages uses dump with good results.
+
+The tar utility is 'essential' in Debian and so will always be around, is not
+tied to any specific filesystem type, and there are entries in the default
+amanda.conf file defining dump types using tar. This may therefore be a good
+option to consider.
+
+Note that if you are using tar with amanda, and getting errors about missing
+exclude files (particularly on upgrades from older versions), then you may
+need to update your dumptypes definition to explicitly indicate that the
+exclude file is optional, as shown in this example:
+
+ define dumptype userdata-lowvalue {
+ program "GNUTAR"
+ comment "Low value user data dumped with tar"
+ options compress-fast, index
+ exclude list optional ".amandaexclude"
+ priority low
+ }
+
+- - - - -
+
+If you see backups failing with an error like:
+
+ driver: FATAL flush line 1: syntax error (skipping != FLUSH)
+
+The problem may be that some versions of Amanda around 2.5.2 are not
+happy if there are unexpected contents in the holdingdisk you have
+defined on the server. This can occur, for example, if you are using
+the mount point of a separate filesystem that contains a lost+found
+directory. The quick fix is to create a subdirectory in that partition
+for Amanda to use that will have no such unexpected contents. For more
+info on this issue see:
+
+ http://forums.zmanda.com/archive/index.php/t-591.html
+
+- - - - -
+
+If you see things like this in dmesg:
+
+ INFO: task ammt:9839 blocked for more than 120 seconds.
+ "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+
+This information from Marc Schaefer may relevant:
+
+> AFAIK it's because mtio operations are done in D state (uninterruptible
+> sleep).
+>
+> And except for mtio operations which may last more than two minutes,
+> nothing in the usual kernel operation will last that long.
+>
+> Solutions:
+> - either fix mtio to be interruptible (which may well cause problems
+> because e.g. SCSI reselection might happen later)
+> - use the proposed work-around
+> - ignore those messages in your logcheck.
+
--- /dev/null
+etc/amanda
+etc/xinetd.d
+usr/sbin
+usr/share/doc/amanda-server/examples
+usr/share/lintian/overrides
+var/lib/amanda
--- /dev/null
+debian/crontab.amanda
+example/chg-multi.conf
+example/chg-scsi.conf
+example/disklist
+example/amanda.conf
+example/inetd.conf.amandaserver
+example/xinetd.amandaserver
+example/template.d/dumptypes
+example/template.d/tapetypes
+example/template.d/README
+example/template.d/chg-manual.conf
+example/template.d/advanced.conf
+example/template.d/amanda-harddisk.conf
+example/template.d/amanda-single-tape.conf
+example/template.d/amanda-tape-changer.conf
+example/template.d/amanda-S3.conf
--- /dev/null
+usr/lib/amanda/amcat.awk
+usr/lib/amanda/amidxtaped
+usr/lib/amanda/amindexd
+usr/lib/amanda/amlogroll
+usr/lib/amanda/amplot.*
+usr/lib/amanda/amtrmidx
+usr/lib/amanda/amtrmlog
+usr/lib/amanda/chg-*
+usr/lib/amanda/driver
+usr/lib/amanda/dumper
+usr/lib/amanda/planner
+usr/lib/amanda/taper
+usr/sbin/activate-devpay
+usr/sbin/amadmin
+usr/sbin/amcheck
+usr/sbin/amcheckdb
+usr/sbin/amcheckdump
+usr/sbin/amcleanup
+usr/sbin/amcleanupdisk
+usr/sbin/amdump
+usr/sbin/amflush
+usr/sbin/amgetconf
+usr/sbin/amlabel
+usr/sbin/amoverview
+usr/sbin/amplot
+usr/sbin/amreport
+usr/sbin/amrmtape
+usr/sbin/amstatus
+usr/sbin/amtape
+usr/sbin/amtapetype
+usr/sbin/amtoc
+usr/share/man/man8/amadmin.8.gz
+usr/share/man/man8/amanda.8.gz
+usr/share/man/man8/amcheck.8.gz
+usr/share/man/man8/amcheckdb.8.gz
+usr/share/man/man8/amcheckdump.8.gz
+usr/share/man/man8/amcleanup.8.gz
+usr/share/man/man8/amdump.8.gz
+usr/share/man/man8/amflush.8.gz
+usr/share/man/man8/amgetconf.8.gz
+usr/share/man/man8/amlabel.8.gz
+usr/share/man/man8/amoverview.8.gz
+usr/share/man/man8/amplot.8.gz
+usr/share/man/man8/amreport.8.gz
+usr/share/man/man8/amrmtape.8.gz
+usr/share/man/man8/amstatus.8.gz
+usr/share/man/man8/amtape.8.gz
+usr/share/man/man8/amtapetype.8.gz
+usr/share/man/man8/amtoc.8.gz
--- /dev/null
+amanda-server: non-standard-dir-perm etc/amanda/ 0770 != 0755
+amanda-server: setuid-binary usr/lib/amanda/dumper 4754 root/backup
+amanda-server: setuid-binary usr/lib/amanda/planner 4754 root/backup
+amanda-server: setuid-binary usr/sbin/amcheck 4754 root/backup
+amanda-server: non-standard-dir-perm var/lib/amanda/ 0770 != 0755
+amanda-server: possible-gpl-code-linked-with-openssl
--- /dev/null
+debian/activate-devpay.1
--- /dev/null
+localhost backup
--- /dev/null
+.TH AMOLDRECOVER 8
+.SH NAME
+amoldrecover \- amrecover variant compantible with old Amanda protocols
+.SH "DESCRIPTION"
+This program has the same syntax and functionality as amrecover, but uses
+the older amidxtaped/amindexd protocol. It is provided only for compatibility
+with old Amanda releases.
+
+This manual page was written for the Debian GNU/Linux distribution
+because the original program does not have a manual page.
+
+.SH "SEE ALSO"
+.PP
+\fBamrecover\fR(8),
+
+.SH AUTHOR
+This manual page was written by Bdale Garbee <bdale@gag.com>,
+for the Debian GNU/Linux system (but may be used by others).
--- /dev/null
+amanda (1:3.3.1-4) unstable; urgency=low
+
+ * eliminate spurious empty /var/log/amanda directory in amanda-server package
+ that generates piuparts errors, closes: #681568
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 14 Jul 2012 15:14:22 -0600
+
+amanda (1:3.3.1-3) unstable; urgency=low
+
+ * patch from Robert Milan to fix kfreebsd FTBFS, closes: #667836
+ * patch from amanda-users mailing list via Jose Manuel dos Santos Calhariz
+ that fixes amrecover issue with VTAPE access, closes: #666088
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 12 Apr 2012 23:29:14 -0600
+
+amanda (1:3.3.1-2) unstable; urgency=low
+
+ * patch from Michael Biebl to elide g_queue_free_full definition that
+ conflicts with glib 2.32 but isn't actually used, closes: #665675
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 03 Apr 2012 07:18:07 -0700
+
+amanda (1:3.3.1-1) unstable; urgency=low
+
+ * new upstream version, closes: #655025, #658933
+ * enable hardening build flags, closes: #644437
+ * include Indonesian translation, closes: #658482
+ * relax build-deps by having dump and xfsdump only required on linux-any,
+ to allow amanda to build on kFreeBSD, closes: #661702
+ * clean up and expand the delivery of examples, closes: #496286, #647550
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 20 Mar 2012 14:59:38 +0100
+
+amanda (1:3.3.0-1) unstable; urgency=low
+
+ * new upstream version, closes: #641453
+ * lots of packaging cleanup
+ * consolidate inetd and xinetd config handling in amanda-common package
+ * add a NEWS entry explaining the switch to bsdtcp auth as default
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 13 Sep 2011 12:42:40 -0600
+
+amanda (1:3.2.1-1.1) unstable; urgency=low
+
+ * non-maintainer upload
+ * clear dependency_libs in *.la files, closes: #621214
+
+ -- Luk Claes <luk@debian.org> Sat, 28 May 2011 17:04:18 +0200
+
+amanda (1:3.2.1-1) unstable; urgency=low
+
+ * new upstream version, closes: #613178
+ * enable support for Amazon S3 storage on request from Christopher McCrory
+ * fix for dh_perl usage to include private library, closes: #582220
+ * merge updated Vietnamese debconf translation, closes: #601919
+ * merge updated Danish debconf translation, closes: #608435
+ * merge updated Arabic debconf translation, closes: #596178
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 27 Feb 2011 11:54:58 -0700
+
+amanda (1:3.2.0-1) unstable; urgency=low
+
+ * new upstream version
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 01 Dec 2010 20:39:49 -0700
+
+amanda (1:3.1.0-1) unstable; urgency=low
+
+ * new upstream version
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 14 Jun 2010 13:46:03 -0600
+
+amanda (1:2.6.1p2-2) unstable; urgency=low
+
+ * add build depend on procps, closes: #552390
+ * add dh_perl call to rules and ${perl:Depends} to amanda-common deps so
+ that we comply with Perl policy, closes: #582220
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 14 Jun 2010 10:21:11 -0600
+
+amanda (1:2.6.1p2-1) unstable; urgency=low
+
+ * new upstream version
+ * move more files out of amanda-common that really belong elsewhere
+ * deliver /usr/lib/amanda/application/am[gs]tar setuid, closes: #558094
+ * leave user backup groups alone on purge, closes: #572933
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 15 Mar 2010 15:23:20 -0600
+
+amanda (1:2.6.1p1-2) unstable; urgency=low
+
+ * calcsize needs to be setuid, closes: #551156
+ * patch from upstream to fix init of xml_app.result in diskfile.c,
+ closes: #550098
+ * add note to server package README.Debian regarding mtio operations that
+ take too long putting noise in dmesg, closes: #506397
+ * merge Finnish translation of the debconf templates, closes: #535214
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 16 Oct 2009 02:10:52 -0600
+
+amanda (1:2.6.1p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #527090, #527489, #486405, #488713
+ * tweak configure to ensure ssh support is enabled, closes: #524618, #492352
+ * update debian/control to include my git packaging repo location
+ * resolve possible bashisms, closes: #530041
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 08 Sep 2009 11:40:42 -0600
+
+amanda (1:2.5.2p1-5) unstable; urgency=low
+
+ * add --without-ipv6 as a short-term fix for amdump connectivity problems,
+ closes: #482754, #501281, #470202
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 26 Mar 2009 22:52:51 -0600
+
+amanda (1:2.5.2p1-4) unstable; urgency=high
+
+ * high priority bug fixes intended for lenny release
+ * update version thresholds in Replaces to ease upgrades, closes: #476583
+ * don't set maxdumpsize in the default amanda.conf, closes: #475524
+ * freshen to latest standards version
+ * revert chg-multi.sh.in and patch since the new version previously pulled
+ in caused more problems than it solved, closes: #486384
+ * undo traps on amverify exit to prevent double reports, closes: #487405
+ * correct paths in amcrypt-ossl-asym(8) xml source, closes: #486739
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 16 Aug 2008 16:03:27 -0300
+
+amanda (1:2.5.2p1-3) unstable; urgency=low
+
+ * fix "bashisms" in the amcleanup and amverify scripts. closes: #464489
+ * merge updated Russian translation, closes: #471030
+ * move example configuration 'DailySet1' from /etc/amanda to
+ /usr/share/doc/amanda-server/examples to reduce confusion, update
+ the amanda-server README.Debian with fresh install notes. closes: #420023
+ * move some binaries out of amanda-common into -server and -client
+ * harden forcing of /usr/bin/mail instead of /usr/bin/Mail, closes: #475771
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 16 Apr 2008 00:02:13 -0600
+
+amanda (1:2.5.2p1-2) unstable; urgency=low
+
+ * document holding disk constraint in amanda-server README.Debian file,
+ closes: #465746
+ * patch from Wolfgang Weisselberg for a problem in amstatus, closes: #471240
+ * enable both with-bsdtcp-security and with-bsdudp-security in configure,
+ perhaps that will help resolve some of the problems users are having
+ with 2.5.2?
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 20 Mar 2008 18:06:58 -0600
+
+amanda (1:2.5.2p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #434607, #434606
+ * pull fresher chg-multi.sh.in from upstream to fix syntax error
+ * drop reference to non-existent 'taper' package in control, closes: #444330
+ * a number of tweaks to address issues found by lintian
+ * incorporate Galician translation, closes: #414113
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 07 Oct 2007 18:39:45 -0600
+
+amanda (1:2.5.1p3-3) unstable; urgency=low
+
+ * fix amcrypt-ossl and amcryopt-ossl-asym to use the right username for
+ Debian systems, closes: #417818
+ * patch from upstream for problem in get_fs_stats(), closes: #420100
+ * patch from upstream for problem in sendsize.c, closes: #420076
+ * replace netbase dependency with update-inetd
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 15 May 2007 11:44:34 -0600
+
+amanda (1:2.5.1p3-2) unstable; urgency=low
+
+ * fold in diff from NMU of 1:2.5.1p1-2.1 by Peter Palfrader, closes: #399790
+ Do not fail postrm when removing the backup user from either
+ group disk or tape does not succeed. Also, try this only
+ when the backup user is in those groups to begin with. Also
+ handles the case of deluser not existing anymore.
+ Based in parts on the patch provided by Andreas Henriksson and
+ the cupsys postinst script.
+ * remove useless redundant clause in postrm, closes: #411739
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 21 Feb 2007 04:22:49 +0900
+
+amanda (1:2.5.1p3-1) unstable; urgency=low
+
+ * new upstream version, closes: #402221
+ * merge updated es.po, closes: #409316
+ * merge updated pt.po, closes: #409697
+ * fix for segfault in amfetchdump, closes: #411470
+ * update inetd and xinetd configs for new security model, closes: #402215
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 20 Feb 2007 13:05:28 +0900
+
+amanda (1:2.5.1p1-2) unstable; urgency=medium
+
+ * fix broken way of setting default CLN_AMANDATES in client-src/clientconf.c
+ so that the file ends up where we expect it, closes: #394796
+ * make this medium priority because of the amandates location problem
+ * updated German translation, closes: #396029
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 29 Oct 2006 11:24:39 -0700
+
+amanda (1:2.5.1p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #395319
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 26 Oct 2006 15:29:08 -0600
+
+amanda (1:2.5.1-1) unstable; urgency=low
+
+ * new upstream version, closes: #361716
+ * incorporate patch from NMU by Martin Krafft based on a suggestion by
+ Bill Alombert (thanks!), accounting for the fact that we now deliver
+ content in amanda-common that used to be in amanda-client, closes: #391026
+ * updated ja.po from Hideki Yamane, closes: #392153
+ * change debconf notification about old/rare conflict with amandadates file
+ to be of type 'error' instead of 'note', closes: #388707
+ * add --with-ssh-security to configure and note issue with suid of dumper
+ to README.Debian, closes: #365306
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 18 Oct 2006 01:02:23 -0600
+
+amanda (1:2.5.0p2-2) unstable; urgency=low
+
+ * merge updated French translation, closes: #369243
+ * merge updated Italian translation, closes: #369588
+ * merge updated Czech translaterion, closes: #370299
+ * merge updated Dutch translaterion, closes: #374850
+ * merge updated Swedish translaterion, closes: #375747
+ * rework postinst to use adduser instead of usermod to add user backup to
+ groups disk and tape, and add postrm support for removing user backup from
+ those groups on purge, closes: #380336
+ * patch from upstream 2.5.1b1 via Geert Uytterhoeven to support tar 1.15.91,
+ closes: #378558
+ * accept patch from Raphael Pinson adding xinetd support
+ * Clean debian/po/templates.pot after build
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 28 Aug 2006 09:15:23 -0400
+
+amanda (1:2.5.0p2-1) unstable; urgency=low
+
+ * new upstream version
+ * freshen delivered default amanda.conf, closes: #359036
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 25 May 2006 22:59:16 -0600
+
+amanda (1:2.5.0-2) unstable; urgency=low
+
+ * tighten amandahosts permissions to user-only in the amanda-common postinst
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 3 Apr 2006 05:03:29 -0700
+
+amanda (1:2.5.0-1) unstable; urgency=low
+
+ * new upstream version, closes: #360085
+ * add --with-maxtapeblocksize=256 to configure, to better support LTO-3
+ tapes like the HP Ultrium 960
+ * tweak packaging to handle changes in upstream makefiles, etc
+ * fix overlong line in amrestore man page synopsys
+ * move private shlibs to the amanda-common package to simplify deps
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 3 Apr 2006 00:28:17 -0700
+
+amanda (1:2.4.5p1-2) unstable; urgency=low
+
+ * now that we're using it for debugging info, make sure /var/log/amanda
+ exists in the amanda-common postinst
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 29 Dec 2005 11:57:11 -0700
+
+amanda (1:2.4.5p1-1) unstable; urgency=low
+
+ * new upstream version
+ * add --with-debugging=/var/log/amanda to avoid potentially insecure use
+ of /tmp, closes: #226139
+ * fix typo in chg-null.sh.in causing it to not use AMANDA_DBGDIR definition
+ * patch chg-null.sh.in to use defined value of tapedev, closes: #219656
+ * patch from Jan Nordholz to fix off-by-one error, closes: #339588
+ * fix misleading usage example in amtoc man page, closes: #297690
+ * add a note to amanda-server's README.Debian about how to keep missing
+ exclude files from making tar not work, closes: #168229, #185312, #186285
+ * fix bogus reported sizes when using dump caused by assuming dump is
+ reporting 512 byte instead of 1k blocks, closes: #234173
+ Debian reports results in 1k, not 512-byte blocks,
+ * remove globbing example from amanda man page that is hopelessly broken
+ and generating man errors
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 29 Dec 2005 01:36:23 -0700
+
+amanda (1:2.4.5-2) unstable; urgency=low
+
+ * merge Arabic translation, closes: #320759
+ * merge Vietnamese translation, closes: #307735
+ * allow debconf-2.0 as a dependency alternative
+ * update dependencies in light of libreadline5-dev, closes: #326390
+ * don't blindly remove non-conffiles in /etc/amanda, closes: #282772
+ * fix strange dump results with smbclient 3.0, closes: #226798, #313553
+ * pass --numeric-owner to tar from sendsize to improve estimation speed
+ on systems using mixed libnss modules, closes: #247661
+ * have amanda-common postinst add /usr/sbin to backup user's path,
+ closes: #74045
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 28 Sep 2005 00:16:44 -0600
+
+amanda (1:2.4.5-1) unstable; urgency=low
+
+ * new upstream version, closes: #299586, #308559
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 3 Jun 2005 09:02:42 -0600
+
+amanda (1:2.4.4p3-3) unstable; urgency=low
+
+ * use /usr/bin/mail instead of /usr/bin/Mail, closes: #296022
+ * incorporate Czech translation from Miroslav Kure, closes: #297596
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 29 May 2005 17:02:16 +0200
+
+amanda (1:2.4.4p3-2) unstable; urgency=low
+
+ * add killpgrp to the set of setuid root:backup executables in the
+ amanda-client package, closes: #266520
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 18 Aug 2004 12:55:21 -0600
+
+amanda (1:2.4.4p3-1) unstable; urgency=low
+
+ * new upstream version
+ * incorporate nl.po from Luk Claes, closes: #240071
+ * incorporate it.po from Luca Monducci, closes: #249171
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 24 Jul 2004 00:17:50 -0600
+
+amanda (1:2.4.4p2-2) unstable; urgency=high
+
+ * don't assume /var/backups is owned by user backup in the postinst,
+ closes: #238069, #218135
+ * fix README.Debian pathnames in descriptions, closes: #225849, #225856
+ * include Japanese debconf translation, closes: #235321
+ * include upstream changelog in amanda-common, closes: #227033
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 14 Mar 2004 23:35:13 -0700
+
+amanda (1:2.4.4p2-1) unstable; urgency=low
+
+ * new upstream version, closes: #228697
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 15 Feb 2004 19:38:11 -0700
+
+amanda (1:2.4.4p1-2) unstable; urgency=low
+
+ * patch to fix problem using samba3, closes: #214845
+ * add AUTHORS, NEWS, and README to the set of docs delivered, closes: #81068
+ * add a note to the amanda-server README.Debian regarding the interaction
+ with bastille's 'restrict system resources' option, closes: #118616
+ * add a note to the amanda-server README.Debian regarding the concerns
+ about the reliability of 'dump', closes: #198060
+ * though amverify now exits instead of hanging if mt is not present, make
+ amanda-server suggest cpio|mt-st to get an mt anyway, closes: #155181
+ * apply patch for chg-scsi.c from Chirik to make emubarcode option work,
+ closes: #214519
+ * include pt.po from Bruno Rodrigues, closes: #216390
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 24 Oct 2003 01:49:29 -0600
+
+amanda (1:2.4.4p1-1) unstable; urgency=low
+
+ * new upstream version, closes: #210324
+ * make rundump setuid like runtar, closes: #193982
+ * switch to gettext-based debconf templates, closes: #198101
+ * stop forcing ownership of ~backup to avoid security issues posed by other
+ packages writing there as root, closes: #198944
+ * limit port ranges to ease use with firewalls, semi-arbitrarily picking
+ ranges TCP 50000-50100 and UDP 840-860, closes: #65109, #89432, #111882
+ * remove ~backup/.amandahosts symlink in postrm on purge, closes: #198949
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 14 Sep 2003 23:21:00 -0600
+
+amanda (1:2.4.4-2) unstable; urgency=low
+
+ * mark amanda-server as replacing files in older amanda-common to ease
+ upgrading, closes: #190185, #191626
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 2 May 2003 10:50:44 -0600
+
+amanda (1:2.4.4-1) unstable; urgency=low
+
+ * new upstream version, closes: #169634, #182397, #182882
+ * updates the README.Debian files, closes: #189228, #189229
+ * change mailx from suggests to depends, closes: #187283
+ * correct instructions in amanda-client's README.Debian, closes: #180179
+ * patch from Brad Roberts, also submitted upstream, that fixes problems
+ with amflush sometimes ending up in an infinite loop inside the libc
+ memory allocation code, closes: #169537
+ * merge Danish templates translation, closes: #174740
+ * update chg-zd-mtx to include definition of cleancycle, the code using it
+ is already fixed in 2.4.3, closes: #169634
+ * remove explicit suggests on awk, since some flavor of awk is essential
+ * add lintian overrides files to squelch noise about conscious decisions
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 20 Apr 2003 01:14:33 -0600
+
+amanda (1:2.4.3-1) unstable; urgency=low
+
+ * new upstream version, closes: #127801, #163844, #167021, #165522, #127801
+ * this version does not hard-code the sed path, closes: #161850, #151962
+ * have clean target in rules file update config.sub/guess
+ * clean up postinst files to only call ldconfig when configuring
+ * move to newer debhelper compatibility mode
+ * fix typo in postinst creation of group tape, closes: #165640
+ * enable support for XFS filesystems by adding xfsdump to the list of
+ required build dependencies, closes: #143913, #110731
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 6 Nov 2002 02:39:58 -0700
+
+amanda (1:2.4.2p2-4) unstable; urgency=low
+
+ * add mtx to the list of build dependencies so support for it gets included
+ * merge chg-zd-mtx.sh.in from 2.5.0 CVS, since it actually works with our
+ current mtx, closes: #136571
+ * merge french templates translation, closes: #138521
+ * merge russian templates translation, closes: #137616
+ * switch to unmerged templates files in the source package
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 2 Apr 2002 00:43:13 -0700
+
+amanda (1:2.4.2p2-3) unstable; urgency=medium
+
+ * solve problem reported as bug 112691 a different way, to back out the
+ change made for -2 that had disasterous side-effects... instead of messing
+ with configure options, just eliminate chg-mtx since it's not useful and
+ the mtx package provides mtx-changer which works.
+ Closes: #119495, #119546, #119352, #119361, #119549, #119665
+ * add lpr to build dependencies, closes: #119399, #108607
+ * change the fix for duplicate dependencies on amanda-common so that it's
+ the versioned flavor we preserve, so all the pieces stay in sync
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 14 Nov 2001 21:41:11 -0700
+
+amanda (1:2.4.2p2-2) unstable; urgency=medium
+
+ * add configure option to keep chg-mtx, et al, from writing to files in
+ in /tmp insecurely, closes: #112691
+ * merge in -pt_BR template translation, closes: #106129
+ * fix duplicate dependencies on amanda-common, closes: #118639, #118642
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 9 Nov 2001 10:30:27 -0700
+
+amanda (1:2.4.2p2-1) unstable; urgency=low
+
+ * new upstream version, closes: #93449
+ * freshen config.sub/guess again
+ * fix problem with tapetype install using wrong libtool, closes: #104772
+ * various minor cleanups in the rules file to reduce warnings
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 19 Jul 2001 23:26:33 -0600
+
+amanda (1:2.4.2-6) unstable; urgency=low
+
+ * freshen config.sub/guess for ia64 and hppa, closes: #90182
+ * amanda tests for -E or -S for estimates from dump during configure, and
+ is selecting -S now with the dump in sid. The latest amanda and latest
+ dump therefore should work fine together, closes: #91859
+ * update build-depends from perl5 to perl
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 4 Apr 2001 15:43:52 -0600
+
+amanda (1:2.4.2-5) unstable; urgency=low
+
+ * add an explicit dependency in the rules file on /usr/bin/smbclient, since
+ the Build-Depends: line in the control file isn't checked automatically,
+ and the configure will happily build amanda without smbclient support if
+ it isn't installed... which is *not* what we want! closes: #85965
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 14 Feb 2001 11:33:06 -0700
+
+amanda (1:2.4.2-4) unstable; urgency=low
+
+ * lose the ftape-util build dependency, nobody wanted it and it's causing
+ various problems. closes: #85516, #85708
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 12 Feb 2001 21:54:31 -0700
+
+amanda (1:2.4.2-3) unstable; urgency=low
+
+ * lose the dh_suidregister calls, since it's obsolete, closes: #85334
+ * add build-depend on ftape-util so that configure will find and know how to
+ use that technology, even though nobody has ever actually asked me about
+ it who wanted to use it... closes: #83287
+ * fold in contributed template translations, closes: #83479, #84839, #84867
+ * if ~backup/.amandahosts isn't a link, use 'su -c backup' when creating it
+ to be compatible with NFS-mounted home directories. It would be cleaner,
+ of course, to train Amanda to use the real file which I now place in /etc
+ directly, but that can wait for another day. closes: #83554
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 9 Feb 2001 11:42:31 -0700
+
+amanda (1:2.4.2-2) unstable; urgency=low
+
+ * make sure /etc/amandahosts has correct owner/group/perms in postinst,
+ closes: #80941
+ * update dependency information since some files moved from amanda-common
+ to amanda-client, so that upgrades go smoothly. also, make the client
+ and server packages have a versioned depend on the common package to avoid
+ potential problems.
+ * problem with visible control chars in amverify confirmed to have been
+ fixed upstream in the 2.4.2 version, closes: #65537
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 31 Dec 2000 21:49:16 -0700
+
+amanda (1:2.4.2-1) unstable; urgency=low
+
+ * new upstream version, closes: #76632, #78040, #79500
+ * fold in debconf support patch from shaleh
+ * make sure all build dependencies are present, closes: #67008
+ * move canonical location of amandahosts file to /etc, moving existing file
+ there if necessary, and using a symlink in ~backup. This allows treatment
+ as a conffile. Closes: #52357
+ * upstream implemented a general Y2K amoverview fix, closes: #64780
+ * chg-scsi is delivered in amanda-server 2.4.2, closes: #41420
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 26 Dec 2000 23:25:22 -0700
+
+amanda (1:2.4.1p1-12) frozen unstable; urgency=low
+
+ * revert amplot/Makefile.in to upstream version to dodge issues created
+ by newer automake version. Note that items in the build depends
+ list in the control file *must* be available or the package build will
+ fail, as some executables won't be generated if configure doesn't find
+ everything it wants! Closes: #64864, marked as grave for potato.
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 11 Jun 2000 09:53:35 -0600
+
+amanda (1:2.4.1p1-11) frozen unstable; urgency=low
+
+ * target frozen because I think the spurious failure messages and duplicated
+ dependencies are worth fixing for potato even though both were filed as
+ "normal" bugs
+ * add extra cases to amanda-client's filtering of tar output to eliminate
+ user concern and confusion from spurious "FAILED DUMP" messages,
+ closes: #60126
+ * be more careful about which -dev packages are on build machine so that
+ we only depend on one version of libreadline, closes: #57940
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 12 Mar 2000 22:31:39 -0700
+
+amanda (1:2.4.1p1-10) unstable; urgency=low
+
+ * fix postinst bug in amanda-server that breaks inetd.conf that was
+ introduced during cut'n'paste for -8, closes: #52332
+ * the amanda-server package depends on mailx because the upstream source
+ looks for mailx at configure time, embeds the path, and uses it to send
+ mail. The dependency on mailx is not arbitrary. Closes: #44034
+ * add mailx to the Build-Depends so configure can find it
+ * update path reference to GPL in copyright file for FHS
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 7 Jan 2000 01:39:14 -0700
+
+amanda (1:2.4.1p1-9) unstable; urgency=low
+
+ * missed a few things in Build-Depends, fill them in
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 5 Dec 1999 15:15:33 -0700
+
+amanda (1:2.4.1p1-8) unstable; urgency=low
+
+ * supply the real tapetype, not just libtool wrapper. closes: #50585, #50280
+ * update control to include Build-Depends:, remove README.source-depends
+ * move the inetd entry handling from amanda-common postinst/prerm to the
+ amanda-server package, since they're only relevant there, closes: #49578
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 27 Nov 1999 17:39:13 -0700
+
+amanda (1:2.4.1p1-7) unstable; urgency=low
+
+ * recompile to include smbclient support
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 7 Nov 1999 14:13:24 -0700
+
+amanda (1:2.4.1p1-6) unstable; urgency=low
+
+ * apply patches from Amanda patch page for glibc21, glibc22, and samba2.
+ Closes: #42771, #44672
+ * real fix for self-referential dependencies, closes: #46362
+ * the amrecover behavior reported was a 2.4.0 issue, closes: #27709
+ * "fix" bash-ism in the rules file, closes: #45236
+ * provide tapetype in amanda-server, closes: #42825
+ * FHS compliance, lintian clean
+ * thanks to Ben Kochie <ben@nerp.net> for reviewing open bugs for this update
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 5 Nov 1999 20:22:00 -0700
+
+amanda (1:2.4.1p1-5) unstable; urgency=low
+
+ * update perl dependency to perl5 as per new perl policy
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 11 Jul 1999 11:37:32 -0600
+
+amanda (1:2.4.1p1-4) unstable; urgency=low
+
+ * fix dependencies for amanda-common in control, closes 38464
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 30 May 1999 23:37:55 -0600
+
+amanda (1:2.4.1p1-3) unstable; urgency=low
+
+ * depend on mailx, closes 34894
+ * lose the -DENABLE_GNUTAR_ATIME_PRESERVE, since it eliminates the ability
+ to use tar for incremental backups, closes 36639
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 24 May 1999 23:57:25 -0600
+
+amanda (1:2.4.1p1-2) unstable; urgency=low
+
+ * replace /var/state usage with /var/lib/amanda, since user backup can't
+ write to /var/state
+ * stop calling automake/autoconf explicitly in the rules file, since it
+ appears that automake 1.4 breaks amanda, while 1.3 was ok. It should be
+ ok to just use the provided configure, closes 32143
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 19 Jan 1999 21:21:18 -0700
+
+amanda (1:2.4.1p1-1) unstable; urgency=low
+
+ * new upstream version, closes 24855, 22270
+ * enable IGNORE_TAR_ERRORS and ENABLE_GNUTAR_ATIME_PRESERVE, closes 28486
+ * have the amanda-common postinst create /var/lib/amanda before it tries to
+ put a file there, closes 22345, 30326, 25106
+ * fix a few last references to /usr/adm, closes 25574
+ * update the docs for amanda-server to include a note about using ftape
+ from Jean Pierre LeJacq, closes 22271
+ * make the 'build-stamp' chunk of the rules file depend on /sbin/dump, since
+ amanda won't know about dump unless it can find it during the configure.
+ Another reason we need build-time dependencies, I guess. Closes 24369.
+ * fix chg-mtx.sh.in to reflect Debian mtx syntax, closes 26208
+ * add tapetype QIC-3080, closes 26569
+ * eliminate dh_du from the rules file
+ * various tweaks to resolve lintian complaints
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 18 Jan 1999 22:58:34 -0700
+
+amanda (1:2.4.0-4) unstable; urgency=low
+
+ * add suggests dump to amanda-client, closes 24962
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 3 Aug 1998 22:32:29 -0600
+
+amanda (1:2.4.0-3) frozen unstable; urgency=low
+
+ * be consistent about pointing to /var/lib/amanda/amandates, closes 21811.
+ * be consistent about supporting suidregister.
+ * make sure user backup's home directory exists before using it in the
+ amanda-common postinst, closes 21897.
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 3 May 1998 20:48:38 -0600
+
+amanda (1:2.4.0-2) frozen unstable; urgency=low
+
+ * update amanda-common postinst to do a better job of making sure the
+ user 'backup' exists, and has the right group privs. Closes 18242,
+ 20675, and 20945
+ * update amanda-client README file to reflect automatic handling of user
+ backup, and to add information for users setting up to do indexing,
+ closes 21313
+ * improve documentation of server config issues in amanda-server README,
+ closes 21366
+ * update default amanda.conf to fix compression flags on comp-user-tar and
+ comp-root-tar, closes 21198
+ * fix typos in amanda-server's README file, closes 21118
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 20 Apr 1998 02:14:50 -0600
+
+amanda (1:2.4.0-1) frozen unstable; urgency=high
+
+ * new upstream release, 2.4.0 is no longer beta...
+ * use an explicit epoch in the version since 2.4.0 < 2.4.0b6 ... sigh
+ * add --with-smbclient to configure run, and include more docs in
+ amanda-common, closes 18366
+ * clean up dependencies, closes 18746
+ * patch dh_movefiles from debhelper to move real files before symlinks when
+ processing wildcards, closes 19267... debhelper bug 18220 addresses this
+ issue.
+ * make better use of wildcards in debhelper control files, closes 18350
+ * fix spelling errors in control file, closes 18959
+ * have amanda-server suggest mailx, since amcheck optionally uses
+ /usr/bin/Mail to notify the operator of needed tapes, closes 18334
+ * improve the postinst slightly... the home directory for user backup needs
+ to be fixed in /etc/passwd before I can do the right things to close
+ 18242 completely. Bug filed against base-passwd, severity important.
+ * various small cleanups suggested to me via email without bugs filed
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 30 Mar 1998 18:29:55 -0700
+
+amanda (2.4.0b6-12) unstable; urgency=low
+
+ * apply upstream patches to bring us to 2.4.0-980319
+ * fold in some of Heiko's improvements from his bo-unstable version
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 24 Mar 1998 23:52:55 -0700
+
+amanda (2.4.0b6-11) unstable; urgency=low
+
+ * apply upstream patches to bring us to 2.4.0b6p4
+ * use appropriate wildcards in amanda-*.files control files. Closes 18196.
+ * include 'adduser' alternative in amanda-client's README, closes 18174.
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 15 Feb 1998 12:54:46 -0700
+
+amanda (2.4.0b6-10) unstable; urgency=low
+
+ * apply upstream patches to bring us to 2.4.0b6p3
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 8 Feb 1998 17:53:47 -0700
+
+amanda (2.4.0b6-9) unstable; urgency=low
+
+ * clean up dependencies, closes 17838
+ * apply upstream patches to bring us to 2.4.0b6p2
+ * switch to automake 1.2d from experimental on build machine, reduces
+ the amount of hackery required, and therefore the size of the diffs.
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 5 Feb 1998 22:40:58 -0700
+
+amanda (2.4.0b6-8) unstable; urgency=low
+
+ * apply upstream patch to handle occasional divide by zero in amplot
+ * refine split of files between binary packages
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 28 Jan 1998 14:33:30 -0700
+
+amanda (2.4.0b6-7) unstable; urgency=low
+
+ * patch for amrmtape from Heiko, will be in a future upstream release
+ * add suidmanager support to control files
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 28 Jan 1998 14:33:30 -0700
+
+amanda (2.4.0b6-6) unstable; urgency=low
+
+ * clean up permissions... with --with-bsd-security enabled, some pieces must
+ be setuid in the server package
+ * fix client prerm so that it only removes the inetd.conf entry it owns.
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 27 Jan 1998 14:44:30 -0700
+
+amanda (2.4.0b6-5) unstable; urgency=low
+
+ * enable use of .amandahosts instead of .rhosts for access control.
+ * change /etc/amandates location to /var/lib/amandates for FSSTND compliance.
+ * ensure /var/lib/amandates exists with correct perms in postinst.
+ * make the /var/lib/amanda-gnutar-lists directory have appropriate perms.
+ * update README files to reflect contemporary reality
+
+ -- Bdale Garbee <bdale@gag.com> Tue, 27 Jan 1998 10:04:58 -0700
+
+amanda (2.4.0b6-4) unstable; urgency=low
+
+ * oops... --with-bsd-security got dropped from the configure at some point,
+ add it back in. Thanks to Heiko again for pointing this out.
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 26 Jan 1998 10:40:39 -0700
+
+amanda (2.4.0b6-3) unstable; urgency=low
+
+ * make amanda-common depend on tar >= 1.12. Thanks to Heiko Schlittermann
+ for pointing this out.
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 26 Jan 1998 10:40:39 -0700
+
+amanda (2.4.0b6-2) unstable; urgency=low
+
+ * amanda-common was suggesting amanda or amanda-client, updated to reflect
+ replacement of 'amanda' with 'amanda-server'.
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 26 Jan 1998 10:40:39 -0700
+
+amanda (2.4.0b6-1) unstable; urgency=low
+
+ * new maintainer
+ * new upstream release, reworked package for libc6, using debhelper
+ * incorporate amanda-common split suggested by Tom Lear's 2.4.0b4 package.
+ this replaces 'amanda' with 'amanda-server', and breaks out an
+ 'amanda-common' package to hold the libs and man pages that were formerly
+ conflicting between amanda and amanda-client. Closes bugs 11046, 11943.
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 26 Jan 1998 09:15:05 -0700
+
+amanda (2.3.0.4-2.1) unstable; urgency=low
+
+ * non-maintainer release (never actually uploaded)
+ * libc6
+ * make amanda and amanda-client depend on netbase (>=3.03) for /etc/services
+ entries. Remove /etc/services mashing from postinst. Closes bugs 12847,
+ 12848, 13795.
+ * make amanda depend on amanda-client. This is the easiest way to resolve
+ the overlapping files problem. It makes the assumption that if you're
+ running an amanda server, you'll want the client stuff anyway so you can
+ back up the server. Since the client package is small, this seems like a
+ better resolution than splitting out a third "common" package. Closes
+ bugs 11046, 11943.
+ * update all references to /etc/amandates and /etc/dumpdates to use
+ /var/lib/*dates, ala current Debian dump package. Closes bug 15586.
+ * pre-apply all the patches from the upstream archive, to simplify the
+ build process. Patches applied include: arithexc.diff,exclude2.diff,
+ flushidx.diff,srvcomp.diff,tardates.diff,exclude.diff,exclude3.diff,
+ longopt.diff, and srvcomp2.diff. Closes bug 13151, 13796.
+ * convert rules file to use debhelper.
+
+ -- Bdale Garbee <bdale@gag.com> Sat, 10 Jan 1998 02:08:02 -0700
+
+amanda (2.3.0.4-2) unstable; urgency=low
+
+ * fixed dependencies for amanda-client
+
+ -- Christian Meder <meder@control.toronto.edu> Wed, 18 Jun 1997 14:49:49 -0400
+
+amanda (2.3.0.4-1) unstable; urgency=low
+
+ * Initial Release.
+ * Split in client and server package
+ * wrote small READMEs to ease a quick start
+ * applied several patches from
+ http://www.cs.umd.edu/projects/amanda/patches.html to fix various
+ new features
+
+ -- Christian Meder <meder@control.toronto.edu> Wed, 14 May 1997 13:08:34 -0500
+
+Local variables:
+mode: debian-changelog
+End:
--- /dev/null
+#!/bin/sh -e
+
+. /usr/share/debconf/confmodule
+
+# if both files exist, suggest they merge them
+# if only one exists, the postinst moves it
+if [ -f /var/lib/amandates ]; then
+ if [ -f /var/lib/amanda/amandates ]; then
+ db_input medium amanda-common/merge_amandates || true
+ db_go
+ fi
+fi
--- /dev/null
+Source: amanda
+Section: utils
+Priority: optional
+Maintainer: Bdale Garbee <bdale@gag.com>
+Vcs-Git: git://git.gag.com/debian/amanda
+Vcs-Browser: http://git.gag.com/?p=debian/amanda
+Build-Depends: debhelper (>= 5), dump [linux-any], gnuplot, libncurses5-dev, libreadline-dev, libtool, flex, perl, smbclient, bsd-mailx | mailx, lpr, mtx, xfsdump [linux-any], po-debconf, autotools-dev, libglib2.0-dev, procps, curl, libcurl4-openssl-dev
+Standards-Version: 3.9.3
+
+Package: amanda-common
+Architecture: any
+Depends: ${misc:Depends}, ${perl:Depends}, ${shlibs:Depends}, update-inetd, tar (>=1.12), perl5, bsd-mailx | mailx, debconf | debconf-2.0, adduser, openbsd-inetd | inet-superserver
+Suggests: amanda-server (= ${binary:Version}) | amanda-client (= ${binary:Version})
+Conflicts: amanda
+Replaces: amanda, amanda-client
+Description: Advanced Maryland Automatic Network Disk Archiver (Libs)
+ This package contains libraries required by the amanda client and
+ server packages.
+
+Package: amanda-server
+Architecture: any
+Depends: ${misc:Depends}, ${shlibs:Depends}, amanda-common (= ${binary:Version}), bsd-mailx | mailx
+Suggests: perl5, gnuplot, amanda-client (= ${binary:Version}), cpio | mt-st
+Conflicts: amanda, amanda-common (<< 1:2.5.2p1-3)
+Replaces: amanda-common (<< 1:2.5.2p1-3)
+Description: Advanced Maryland Automatic Network Disk Archiver (Server)
+ Amanda is a backup system designed to archive many computers on a
+ network to a single large-capacity tape drive. This package is
+ suitable for large amounts of data to backup. For smaller solutions
+ take a look at afbackup, tob, ...
+ .
+ Features:
+ * will back up multiple machines in parallel to a holding disk, blasting
+ finished dumps one by one to tape as fast as we can write files to
+ tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host
+ with a large holding disk can be filled by Amanda in under 4 hours.
+ * built on top of standard backup software: Unix dump/restore, and
+ later GNU Tar and others.
+ * does simple tape management: will not overwrite the wrong tape.
+ * supports tape changers via a generic interface. Easily customizable
+ to any type of tape carousel, robot, or stacker that can be controlled
+ via the unix command line.
+ * for a restore, tells you what tapes you need, and finds the proper
+ backup image on the tape for you.
+ * recovers gracefully from errors, including down or hung machines.
+ * reports results, including all errors in detail, in email to operators.
+ * will dynamically adjust backup schedule to keep within constraints:
+ no more juggling by hand when adding disks and computers to network.
+ * includes a pre-run checker program, that conducts sanity checks on both
+ the tape server host and all the client hosts (in parallel), and will
+ send an e-mail report of any problems that could cause the backups to
+ fail.
+ * can compress dumps before sending or after sending over the net, with
+ either compress or gzip.
+ * can optionally synchronize with external backups, for those large
+ timesharing computers where you want to do full dumps when the system
+ is down in single-user mode (since BSD dump is not reliable on active
+ filesystems): Amanda will still do your daily dumps.
+ * lots of other options; Amanda is very configurable.
+ .
+ For important notes, see /usr/share/doc/amanda-server/README.Debian.
+ .
+ Explanation of suggested programs:
+ - perl is needed for some non essential server utilities
+ - gnuplot is needed for plotting statistics of backups
+ - to backup the tape server, you need to install the client too
+
+Package: amanda-client
+Architecture: any
+Depends: ${misc:Depends}, ${shlibs:Depends}, amanda-common (= ${binary:Version})
+Suggests: gnuplot, dump, smbclient
+Conflicts: amanda, amanda-common (<< 1:2.5.2p1-3)
+Replaces: amanda-common (<< 1:2.5.2p1-3)
+Description: Advanced Maryland Automatic Network Disk Archiver (Client)
+ Amanda is a backup system designed to archive many computers on a
+ network to a single large-capacity tape drive. This package is
+ suitable for large amounts of data to backup. For smaller solutions
+ take a look at afbackup, tob, ...
+ .
+ Features:
+ * will back up multiple machines in parallel to a holding disk, blasting
+ finished dumps one by one to tape as fast as we can write files to
+ tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host
+ with a large holding disk can be filled by Amanda in under 4 hours.
+ * built on top of standard backup software: Unix dump/restore, and
+ later GNU Tar and others.
+ * does simple tape management: will not overwrite the wrong tape.
+ * supports tape changers via a generic interface. Easily customizable
+ to any type of tape carousel, robot, or stacker that can be controlled
+ via the unix command line.
+ * for a restore, tells you what tapes you need, and finds the proper
+ backup image on the tape for you.
+ * recovers gracefully from errors, including down or hung machines.
+ * reports results, including all errors in detail, in email to operators.
+ * will dynamically adjust backup schedule to keep within constraints:
+ no more juggling by hand when adding disks and computers to network.
+ * includes a pre-run checker program, that conducts sanity checks on both
+ the tape server host and all the client hosts (in parallel), and will
+ send an e-mail report of any problems that could cause the backups to
+ fail.
+ * can compress dumps before sending or after sending over the net, with
+ either compress or gzip.
+ * can optionally synchronize with external backups, for those large
+ timesharing computers where you want to do full dumps when the system
+ is down in single-user mode (since BSD dump is not reliable on active
+ filesystems): Amanda will still do your daily dumps.
+ * lots of other options; Amanda is very configurable.
+ .
+ THIS PACKAGE RELIES ON A RUNNING AMANDA SERVER IN YOUR NETWORK.
+ .
+ For important notes, see /usr/share/doc/amanda-client/README.Debian.
+ .
+ Explanation of suggested programs:
+ - gnuplot is needed for plotting statistics of backups
+
--- /dev/null
+This package was built by Bdale Garbee <bdale@gag.com> using sources downloaded
+from
+
+ ftp://ftp.amanda.org/pub/amanda/
+
+The Amanda copyright:
+
+/*
+ * Amanda, The Advanced Maryland Automatic Network Disk Archiver
+ * Copyright (c) 1991-1998 University of Maryland at College Park
+ * All Rights Reserved.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of U.M. not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. U.M. makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * U.M. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL U.M.
+ * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * Authors: the Amanda Development Team. Its members are listed in a
+ * file named AUTHORS, in the root directory of this distribution.
+ */
+
+/*
+** This Version of Amanda contains parts of GNU programs
+** (alloca.c, exclude_file.c)
+*/
+
+On Debian GNU/Linux systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
+
--- /dev/null
+# This is an example for a crontab entry for automated backup with amanda
+# With these cron lines, Amanda will check that the correct tape is in
+# the drive every weekday afternoon at 4pm (if it isn't, all the
+# operators will get mail). At 12:45am that night the dumps will be run.
+0 16 * * 1-5 /usr/sbin/amcheck -m DailySet1
+45 0 * * 2-6 /usr/sbin/amdump DailySet1
+
--- /dev/null
+AUTHORS
+NEWS
+README
--- /dev/null
+Description: make dumpdates path in docs match Debian configuration
+Author: Bdale Garbee <bdale@gag.com>
+
+--- amanda-3.3.0.orig/man/disklist.5
++++ amanda-3.3.0/man/disklist.5
+@@ -89,7 +89,7 @@ defined in the
+ \fBamanda\&.conf\fR
+ file\&.
+ \fIDumptype\fRs specify backup related parameters, such as whether to compress the backups, whether to record backup results in
+-/etc/dumpdates, the disk\*(Aqs relative priority, etc\&.
++/var/lib/dumpdates, the disk\*(Aqs relative priority, etc\&.
+ .RE
+ .PP
+ \fIspindle\fR
+--- amanda-3.3.0.orig/man/amanda.conf.5
++++ amanda-3.3.0/man/amanda.conf.5
+@@ -1672,8 +1672,8 @@ keyword append the values to the list of
+ \fBrecord\fR \fIboolean\fR
+ .RS 4
+ Default:
+-\fByes\fR\&. Whether to ask the backup program to update its database (e\&.g\&.
+-/etc/dumpdates
++\fIyes\fR\&. Whether to ask the backup program to update its database (e\&.g\&.
++/var/lib/dumpdates
+ for DUMP or
+ /usr/local/var/amanda/gnutar\-lists
+ for GNUTAR) of time stamps\&. This is normally enabled for daily backups and turned off for periodic archival runs\&.
+--- amanda-3.3.0.orig/man/entities/global.entities.in
++++ amanda-3.3.0/man/entities/global.entities.in
+@@ -98,7 +98,7 @@
+ <!ENTITY tapelist '<manref name="tapelist" vol="5"/>'>
+
+ <!-- IDs for files used by AMANDA-->
+-<!ENTITY dumpdates '<filename>/etc/dumpdates</filename>'>
++<!ENTITY dumpdates '<filename>/var/lib/dumpdates</filename>'>
+
+ <!-- IDs for AMANDA commands-->
+ <!ENTITY amadmin ' <command>amadmin</command>'>
+--- amanda-3.3.0.orig/man/xml-source/disklist.5.xml
++++ amanda-3.3.0/man/xml-source/disklist.5.xml
+@@ -112,7 +112,7 @@ file.
+ specify backup related parameters,
+ such as whether to compress the backups,
+ whether to record backup results in
+-<filename>/etc/dumpdates</filename>, the disk's relative priority, etc.</para>
++<filename>/var/lib/dumpdates</filename>, the disk's relative priority, etc.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+--- amanda-3.3.0.orig/man/xml-source/amanda.conf.5.xml
++++ amanda-3.3.0/man/xml-source/amanda.conf.5.xml
+@@ -2155,8 +2155,8 @@ the property to set, and the others cont
+ <term><amkeyword>record</amkeyword> <amtype>boolean</amtype></term>
+ <listitem>
+ <para>Default:
+-<amkeyword>yes</amkeyword>.
+-Whether to ask the backup program to update its database (e.g. <filename>/etc/dumpdates</filename>
++<emphasis remap='I'>yes</emphasis>.
++Whether to ask the backup program to update its database (e.g. <filename>/var/lib/dumpdates</filename>
+ for DUMP or <filename>/usr/local/var/amanda/gnutar-lists</filename> for GNUTAR) of time stamps.
+ This is normally enabled for daily backups and turned off for periodic archival runs.</para>
+ </listitem>
+--- amanda-3.3.0.orig/client-src/amandates.c
++++ amanda-3.3.0/client-src/amandates.c
+@@ -26,7 +26,7 @@
+ /*
+ * $Id: amandates.c,v 1.21 2006/07/25 18:35:21 martinea Exp $
+ *
+- * manage amandates file, that mimics /etc/dumpdates, but stores
++ * manage amandates file, that mimics /var/lib/dumpdates, but stores
+ * GNUTAR dates
+ */
+
+@@ -314,7 +314,7 @@ import_dumpdates(
+
+ devname = amname_to_devname(amdp->name);
+
+- if((dumpdf = fopen("/etc/dumpdates", "r")) == NULL) {
++ if((dumpdf = fopen("/var/lib/dumpdates", "r")) == NULL) {
+ amfree(devname);
+ return;
+ }
+--- amanda-3.3.0.orig/client-src/selfcheck.c
++++ amanda-3.3.0/client-src/selfcheck.c
+@@ -1128,8 +1128,8 @@ check_overall(void)
+ check_file(COMPRESS_PATH, X_OK);
+
+ if (need_dump || need_xfsdump ) {
+- if (check_file_exist("/etc/dumpdates")) {
+- check_file("/etc/dumpdates",
++ if (check_file_exist("/var/lib/dumpdates")) {
++ check_file("/var/lib/dumpdates",
+ #ifdef USE_RUNDUMP
+ F_OK
+ #else
+@@ -1139,15 +1139,15 @@ check_overall(void)
+ } else {
+ #ifndef USE_RUNDUMP
+ if (access("/etc", R_OK|W_OK) == -1) {
+- g_printf(_("ERROR [dump will not be able to create the /etc/dumpdates file: %s]\n"), strerror(errno));
++ g_printf(_("ERROR [dump will not be able to create the /var/lib/dumpdates file: %s]\n"), strerror(errno));
+ }
+ #endif
+ }
+ }
+
+ if (need_vdump) {
+- if (check_file_exist("/etc/vdumpdates")) {
+- check_file("/etc/vdumpdates", F_OK);
++ if (check_file_exist("/var/lib/vdumpdates")) {
++ check_file("/var/lib/vdumpdates", F_OK);
+ }
+ }
+
+@@ -1159,6 +1159,7 @@ check_overall(void)
+ check_space(AMANDA_DBGDIR, (off_t)64); /* for amandad i/o */
+ #endif
+
++ check_space("/var/lib", (off_t)64); /* for /var/lib/dumpdates writing */
+ check_space("/etc", (off_t)64); /* for /etc/dumpdates writing */
+ }
+ }
+--- amanda-3.3.0.orig/server-src/diskfile.h
++++ amanda-3.3.0/server-src/diskfile.h
+@@ -110,7 +110,7 @@ typedef struct disk_s {
+ char *clnt_decrypt_opt; /* client-side decryption option parameter to use */
+ double comprate[2]; /* default compression rates */
+ /* flag options */
+- int record; /* record dump in /etc/dumpdates ? */
++ int record; /* record dump in /var/lib/dumpdates ? */
+ int skip_incr; /* incs done externally ? */
+ int skip_full; /* fulls done externally ? */
+ int to_holdingdisk; /* use holding disk ? */
+--- amanda-3.3.0.orig/example/amanda.conf.in
++++ amanda-3.3.0/example/amanda.conf.in
+@@ -460,7 +460,7 @@ define tapetype SEAGATE-ULTRIUM-LTO {
+ # program - specify the dump system to use. Valid values are "DUMP",
+ # or "GNUTAR". Default: [program "DUMP"].
+ # record - record the backup in the time-stamp-database of the backup
+-# program (e.g. /etc/dumpdates for DUMP or
++# program (e.g. /var/lib/dumpdates for DUMP or
+ # @GNUTAR_LISTED_INCREMENTAL_DIRX@ for GNUTAR.).
+ # Default: [record yes]
+ # skip-full - skip the disk when a level 0 is due, to allow full backups
+@@ -621,7 +621,7 @@ define dumptype nocomp-high {
+
+ define dumptype nocomp-test {
+ global
+- comment "test dump without compression, no /etc/dumpdates recording"
++ comment "test dump without compression, no /var/lib/dumpdates recording"
+ compress none
+ record no
+ priority medium
+@@ -629,7 +629,7 @@ define dumptype nocomp-test {
+
+ define dumptype comp-test {
+ nocomp-test
+- comment "test dump with compression, no /etc/dumpdates recording"
++ comment "test dump with compression, no /var/lib/dumpdates recording"
+ compress client fast
+ }
+
+--- amanda-3.3.0.orig/example/template.d/dumptypes
++++ amanda-3.3.0/example/template.d/dumptypes
+@@ -106,7 +106,7 @@
+ # program - specify the dump system to use. Valid values are "DUMP"
+ # "STAR" and "GNUTAR". Default: [program "DUMP"].
+ # record - record the backup in the time-stamp-database of the backup
+-# program (e.g. /etc/dumpdates for DUMP or
++# program (e.g. /var/lib/dumpdates for DUMP or
+ # /var/lib/amanda/gnutar-lists for GNUTAR.).
+ # Default: [record yes]
+ # skip-full - skip the disk when a level 0 is due, to allow full backups
+@@ -302,7 +302,7 @@ define dumptype nocomp-high {
+
+ define dumptype nocomp-test {
+ global
+- comment "test dump without compression, no /etc/dumpdates recording"
++ comment "test dump without compression, no /var/lib/dumpdates recording"
+ compress none
+ record no
+ priority medium
+@@ -310,7 +310,7 @@ define dumptype nocomp-test {
+
+ define dumptype comp-test {
+ nocomp-test
+- comment "test dump with compression, no /etc/dumpdates recording"
++ comment "test dump with compression, no /var/lib/dumpdates recording"
+ compress client fast
+ }
+
--- /dev/null
+Description: Remove g_queue_free_full() since it conflicts with glib 2.32
+ glib 2.32 introduce g_queue_free_full() which conflicts with the
+ amanda-internal version of this function. As it doesn't seem to
+ be used, simply remove it.
+Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=665675
+
+Index: amanda-3.3.1/common-src/glib-util.c
+===================================================================
+--- amanda-3.3.1.orig/common-src/glib-util.c 2012-02-21 12:36:51.000000000 +0100
++++ amanda-3.3.1/common-src/glib-util.c 2012-03-31 01:33:21.177134297 +0200
+@@ -120,15 +120,6 @@
+ }
+ #endif
+
+-void g_queue_free_full(GQueue * queue) {
+- while (!g_queue_is_empty(queue)) {
+- gpointer data;
+- data = g_queue_pop_head(queue);
+- amfree(data);
+- }
+- g_queue_free(queue);
+-}
+-
+ void g_ptr_array_free_full(GPtrArray * array) {
+ size_t i;
+
+Index: amanda-3.3.1/common-src/glib-util.h
+===================================================================
+--- amanda-3.3.1.orig/common-src/glib-util.h 2012-02-21 12:36:51.000000000 +0100
++++ amanda-3.3.1/common-src/glib-util.h 2012-03-31 01:33:29.013134019 +0200
+@@ -72,7 +72,6 @@
+
+ /* These functions all take a GLib container, and call free() on all the
+ * pointers in the container before free()ing the container itself. */
+-void g_queue_free_full(GQueue * queue);
+ void g_ptr_array_free_full(GPtrArray * array);
+
+ /* g_value_compare() does what you expect. It returns TRUE if and
--- /dev/null
+diff --git a/common-src/glib-util.c b/common-src/glib-util.c
+index 6a42e8e..99f55f7 100644
+--- a/common-src/glib-util.c
++++ b/common-src/glib-util.c
+@@ -38,12 +38,8 @@ glib_init(void) {
+ if (did_glib_init) return;
+ did_glib_init = TRUE;
+
+- /* set up libcurl (this must happen before threading
+- * is initialized) */
++ /* set up libcurl */
+ #ifdef HAVE_LIBCURL
+-# ifdef G_THREADS_ENABLED
+- g_assert(!g_thread_supported()); /* assert threads aren't initialized yet */
+-# endif
+ g_assert(curl_global_init(CURL_GLOBAL_ALL) == 0);
+ #endif
+
+@@ -64,12 +60,6 @@ glib_init(void) {
+ /* Initialize glib's type system. On glib >= 2.24, this will initialize
+ * threads, so it must be done after curl is initialized. */
+ g_type_init();
+-
+- /* And set up glib's threads */
+-#if defined(G_THREADS_ENABLED) && !defined(G_THREADS_IMPL_NONE)
+- if (!g_thread_supported())
+- g_thread_init(NULL);
+-#endif
+ }
+
+ typedef enum {
--- /dev/null
+dumpdates-path
+glib-2.32.patch
+kfreebsd-ftbfs.diff
--- /dev/null
+[type: gettext/rfc822deb] templates
--- /dev/null
+# translation of ar.po to
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+# Developers do not need to manually edit POT or PO files.
+#
+# Ossama M. Khayat, 2005.
+# Ossama M. Khayat <okhayat@yahoo.com>, 2010.
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda_1:2.4.5-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2010-09-09 04:51+0300\n"
+"Last-Translator: Ossama M. Khayat <okhayat@yahoo.com>\n"
+"Language-Team: Arabic <support@arabeyes.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 1.0\n"
+"Plural-Forms: nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 "
+"&& n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "الرجاء دمج /var/lib/amandates و /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"لديك كلاً من /var/lib/amandates و /var/lib/amanda/amandates. الرجاء معاينة "
+"الملفات، ودمج المحتويات التي تهمك حول موقع /var/lib/amanda/amandates، وإزالة "
+"الملف /var/lib/amandates القديم."
+
--- /dev/null
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-06-04 17:06+0200\n"
+"Last-Translator: Miroslav Kure <kurem@debian.cz>\n"
+"Language-Team: Czech <debian-l10n-czech@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Spojte prosím /var/lib/amandates a /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"V systému máte soubor /var/lib/amandates i /var/lib/amanda/amandates. Oba "
+"soubory prohlédněte, zajímavý obsah slučte do /var/lib/amanda/amandates a "
+"starý soubor /var/lib/amandates smažte."
--- /dev/null
+# Danish translation for amanda.
+# Copyright (C) 2010 amanda og nedenstående oversættere.
+# This file is distributed under the same license as the amanda package.
+# Joe Hansen (joedalton2@yahoo.dk), 2010.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2010-12-30 19:25+0200\n"
+"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
+"Language-Team: Danish <debian-l10n-danish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Venligst flet /var/lib/amandates og /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Du har både /var/lib/amandates og /var/lib/amanda/amandates. Du rådes til at "
+"gennemse filerne, og flette indholdet der interesserer dig til den nye "
+"lokation /var/lib/amanda/amandates og fjern den gamle fil /var/lib/amandates."
--- /dev/null
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-10-29 15:05+0100\n"
+"Last-Translator: Helge Kreutzmann <debian@helgefjell.de>\n"
+"Language-Team: de <debian-l10n-german@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Bitte vereinigen Sie /var/lib/amandates und /var/lib/amanda/amandates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Es existieren die beiden Verzeichnisse /var/lib/amandates und /var/lib/"
+"amanda/amandates. Bitte überprüfen Sie die Dateien und verschieben Sie den "
+"Inhalt, der Ihnen wichtig ist, nach /var/lib/amanda/amandates und löschen "
+"Sie die alte Datei /var/lib/amandates."
--- /dev/null
+# amanda translation to spanish
+# Copyright (C) 2007 Free Software Foundation, Inc.
+# This file is distributed under the same license as the package.
+#
+# Changes:
+# - Initial translation
+# Manuel Porras Peralta , 2007
+#
+#
+# Traductores, si no conoce el formato PO, merece la pena leer la
+# documentación de gettext, especialmente las secciones dedicadas a este
+# formato, por ejemplo ejecutando:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Equipo de traducción al español, por favor lean antes de traducir
+# los siguientes documentos:
+#
+# - El proyecto de traducción de Debian al español
+# http://www.debian.org/intl/spanish/
+# especialmente las notas y normas de traducción en
+# http://www.debian.org/intl/spanish/notas
+#
+# - La guía de traducción de po's de debconf:
+# /usr/share/doc/po-debconf/README-trans
+# o http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Si tiene dudas o consultas sobre esta traducción consulte con el último
+# traductor (campo Last-Translator) y ponga en copia a la lista de
+# traducción de Debian al español (<debian-l10n-spanish@lists.debian.org>)
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2007-01-29 14:29+0100\n"
+"Last-Translator: Manuel Porras Peralta «Venturi» <venturi.debian@gmail.com>\n"
+"Language-Team: Debian Spanish <debian-l10n-spanish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Por favor, combine «/var/lib/amandates» y «/var/lib/amanda/amandates»"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Se han detectado los archivos «/var/lib/amandates» y «/var/lib/amanda/"
+"amandates». Por favor, revíselos, combine los contenidos que necesite en el "
+"archivo «/var/lib/amanda/amandates», y borre el archivo antiguo «/var/lib/"
+"amandates»."
--- /dev/null
+# Copyright (C) 2009
+# This file is distributed under the same license as the amanda package.
+#
+# Esko Arajärvi <edu@iki.fi>, 2009.
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2009-06-30 22:11+0300\n"
+"Last-Translator: Esko Arajärvi <edu@iki.fi>\n"
+"Language-Team: Finnish <debian-l10n-finnish@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 0.3\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Yhdistä /var/lib/amandates ja /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Järjestelmässä on sekä tiedosto /var/lib/amandates että tiedosto "
+"/var/lib/amanda/amandates. Tarkasta molemmat tiedostot ja yhdistä "
+"tarvittava sisältö tiedostoon /var/lib/amanda/amandates. Poista tämän "
+"jälkeen vanha tiedosto /var/lib/amandates."
+
--- /dev/null
+# translation of fr.po to French
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+# Original french translation by an unknown contributor
+#
+# Christian Perrier <bubulle@debian.org>, 2006.
+msgid ""
+msgstr ""
+"Project-Id-Version: fr\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-05-28 17:13+0200\n"
+"Last-Translator: Christian Perrier <bubulle@debian.org>\n"
+"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.2\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+"Fusion indispensable de /var/lib/amandates et /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Les deux fichiers /var/lib/amandates et /var/lib/amanda/amandates existent. "
+"Veuillez les examiner et fusionner les données importantes dans le fichier /"
+"var/lib/amanda/amandates ; supprimez ensuite l'ancien fichier /var/lib/"
+"amandates. "
--- /dev/null
+#. This catalog was generated by poedit
+#. Number of items: 2
+#. Language: French
+#. Country:
+#. Basepath:
+#. Paths: 0
+#. Keywords: 0
--- /dev/null
+# Galician translation of amanda's debconf templates
+# This file is distributed under the same license as the amanda package.
+# Jacobo Tarrio <jtarrio@debian.org>, 2007.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2007-03-09 09:24+0100\n"
+"Last-Translator: Jacobo Tarrio <jtarrio@debian.org>\n"
+"Language-Team: Galician <proxecto@trasno.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Combine /var/lib/amandates e /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"No seu sistema existen os dous ficheiros, /var/lib/amandates e /var/lib/"
+"amanda/amandates. Revise os ficheiros e combine o contido interesante no "
+"ficheiro /var/lib/amanda/amandates e elimine o ficheiro antigo, /var/lib/"
+"amandates."
--- /dev/null
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1-3.3.0-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2012-02-03 19:55+0700\n"
+"Last-Translator: Kurniawan Haikal <conecones@gmail.com>\n"
+"Language-Team: Debian Indonesia Translators <debian-l10n-indonesian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Poedit-Language: Indonesian\n"
+"X-Poedit-Country: INDONESIA\n"
+"X-Poedit-SourceCharset: utf-8\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Silakan gabungkan /var/lib/amandates dan /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "You have both /var/lib/amandates and /var/lib/amanda/amandates. Please review the files, and merge the contents you care about to the /var/lib/amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr "Anda memiliki /var/lib/amandates dan /var/lib/amanda/amandates. Silakan periksa ulang berkas-berkas tersebut, dan gabungkan isi yang Anda anggap penting ke lokasi /var/lib/amanda/amandates, dan hapus berkas lama /var/lib/amandates."
+
--- /dev/null
+# Italian (it) translation of debconf templates for amanda
+# Copyright (C) 2004 Software in the Public Interest
+# This file is distributed under the same license as the amanda package.
+# Luca Monducci <luca.mo@tiscali.it>, 2004-2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.0p2 italian debconf templates\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-05-30 10:30+0200\n"
+"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
+"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Unire /var/lib/amandates e /var/lib/amanda/amndates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Esistono sia /var/lib/amandates che /var/lib/amanda/amandates. Controllare i "
+"file e unire tutte le parti utili in /var/lib/amanda/amandates e poi "
+"rimuovere il file /var/lib/amanadates."
--- /dev/null
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 2.5.0p2-2.1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-10-11 00:08+0900\n"
+"Last-Translator: Hideki Yamane (Debian-JP) <henrich@debian.or.jp>\n"
+"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "/var/lib/amandates と /var/lib/amanda/amandates をマージしてください。"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"/var/lib/amandates と /var/lib/amanda/amandates の両方があります。ファイルを"
+"確認し、/var/lib/amanda/amandates に注意が必要な内容をマージしてから、古い"
+"ファイル /var/lib/amandates を削除してください。"
--- /dev/null
+# translation of amanda 1:2.5.0p2-1_templates.po to Dutch
+# This file is distributed under the same license as the amanda package.
+# Please see debian/copyright.
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+# Luk Claes <luk.claes(AT)ugent(DOT)be>, 2004
+# This is an unofficial translation
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.0p2-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-06-18 20:45+0100\n"
+"Last-Translator: Kurt De Bree <kdebree(AT)telenet(DOT)be>\n"
+"Language-Team: Debian l10n Dutch <debian-l10n-dutch@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=iso-8859-15\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Voeg /var/lib/amandates en /var/lib/amanda/amandates samen."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Zowel /var/lib/amandates als /var/lib/amanda/amandates zijn op uw "
+"systeemaanwezig. Kijk deze bestanden na en combineer de inhoud u belangrijk "
+"vindt, in /var/lib/amanda/amandates, en verwijder het oude bestand /var/lib/"
+"amandates."
--- /dev/null
+# Portuguese translation of amanda debconf messages.
+# Copyright (C) 2007 Carlos Lisboa
+# This file is distributed under the same license as the amanda package.
+# Carlos Lisboa <carloslisboa@gmail.com>, 2007.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2007-02-04 12:24+0000\n"
+"Last-Translator: Carlos Lisboa <carloslisboa@gmail.com>\n"
+"Language-Team: Portuguese <traduz@debianpt.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+"Por favor faça a fusão de /var/lib/amandates e /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Possui tanto o /var/lib/amandates como o /var/lib/amanda/amandates. Por "
+"favor reveja esses ficheiros, e faça a fusão do conteúdo que pretende para o "
+"local /var/lib/amanda/amandates, e remova o ficheiro antigo /var/lib/"
+"amandates."
--- /dev/null
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+#, fuzzy
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Por favor junte /var/lib/amandates e /var/lib/amanda/amandates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Você possui ambos /var/lib/amandates e /var/lib/amanda/amandates. Por favor "
+"revise os arquivos, junte os conteúdos que lhe importam para a localização /"
+"var/lib/amanda/amandates e remova o antigo arquivo /var/lib/amandates."
--- /dev/null
+# translation of amanda_1:2.5.2p1-1_ru.po to Russian
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
+# Developers do not need to manually edit POT or PO files.
+#
+# Yuri Kozlov <kozlov.y@gmail.com>, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.2p1-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2008-03-15 13:30+0300\n"
+"Last-Translator: Yuri Kozlov <kozlov.y@gmail.com>\n"
+"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+"Объедините настройки из /var/lib/amandates и /var/lib/amanda/amandates."
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"В системе найдены файлы: /var/lib/amandates и /var/lib/amanda/amandates. "
+"Просмотрите эти файлы, объедините их настройки в файле /var/lib/amanda/"
+"amandates и удалите старый файл /var/lib/amandates."
--- /dev/null
+#
+# Translators, if you are not familiar with the PO format, gettext
+# documentation is worth reading, especially sections dedicated to
+# this format, e.g. by running:
+# info -n '(gettext)PO Files'
+# info -n '(gettext)Header Entry'
+#
+# Some information specific to po-debconf are available at
+# /usr/share/doc/po-debconf/README-trans
+# or http://www.debian.org/intl/l10n/po-debconf/README-trans
+#
+# Developers do not need to manually edit POT or PO files.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1:2.5.0p2-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2006-06-27 23:05+0100\n"
+"Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
+"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Sammanfoga /var/lib/amandates och /var/lib/amanda/amandates"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Du har både /var/lib/amandates och /var/lib/amanda/amandates. Granska dessa "
+"filer och sammanfoga innehållet som du bryr dig om till den nya platsen /var/"
+"lib/amanda/amandates. Ta sedan bort den gamla filen /var/lib/amandates."
--- /dev/null
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr ""
+
+#. Type: error
+#. Description
+#: ../templates:1001
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
--- /dev/null
+# Vietnamese Translation for Amanda.
+# Copyright © 2010 Free Software Foundation, Inc.
+# Clytie Siddall <clytie@riverland.net.au>, 2005-2010.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: amanda 1/3.1.0-1\n"
+"Report-Msgid-Bugs-To: amanda@packages.debian.org\n"
+"POT-Creation-Date: 2008-04-16 01:13-0600\n"
+"PO-Revision-Date: 2010-10-31 13:45+1030\n"
+"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
+"Language-Team: Vietnamese <vi-VN@googlegroups.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: LocFactoryEditor 1.8\n"
+
+#: ../templates:1001
+#. Type: error
+#. Description
+msgid "Please merge /var/lib/amandates and /var/lib/amanda/amandates"
+msgstr "Hòa trộn « /var/lib/amandates » và « /var/lib/amanda/amandates »"
+
+#: ../templates:1001
+#. Type: error
+#. Description
+msgid ""
+"You have both /var/lib/amandates and /var/lib/amanda/amandates. Please "
+"review the files, and merge the contents you care about to the /var/lib/"
+"amanda/amandates location, and remove the old file /var/lib/amandates."
+msgstr ""
+"Đồng thời có cả hai tập tin « /var/lib/amandates » và « /var/lib/amanda/amandates ». Hãy xem lại hai tập tin đó, sau đó hoà trộn nội dung muốn giữ lại vào vị trí « /var/lib/amanda/amandates », và gỡ bỏ tập tin cũ « /var/lib/amandates »."
--- /dev/null
+#!/usr/bin/make -f
+# Copyright 1998-2011 by Bdale Garbee. License GPL v2
+
+export DH_VERBOSE=1
+
+DPKG_EXPORT_BUILDFLAGS = 1
+-include /usr/share/dpkg/buildflags.mk
+
+r=$(shell pwd)/debian/amanda-common
+s=$(shell pwd)/debian/amanda-server
+c=$(shell pwd)/debian/amanda-client
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+ # pick up latest config files provided by autotools-dev
+ cp -f /usr/share/misc/config.sub config/config.sub
+ cp -f /usr/share/misc/config.guess config/config.guess
+ # do we need --{htmldir,dvidir,pdfdir,psdir} to force subdirectories?
+ # should we re-craft this to use --without-server and --without-client,
+ # and lose the amanda-common package?
+ MAILER=/usr/bin/mail \
+ SSH=/usr/bin/ssh \
+ ./configure \
+ --prefix=/usr \
+ --bindir=/usr/sbin \
+ --libexecdir=/usr/lib/amanda \
+ --without-amlibexecdir \
+ --without-amperldir \
+ --sysconfdir=/etc \
+ --sharedstatedir=/var/lib \
+ --localstatedir=/var/lib \
+ --with-user=backup \
+ --with-group=backup \
+ --with-tcpportrange=50000,50100 \
+ --with-udpportrange=840,860 \
+ --with-debugging=/var/log/amanda \
+ --with-gnutar-listdir=/var/lib/amanda/gnutar-lists \
+ --with-index-server=localhost \
+ --with-bsd-security \
+ --with-smbclient=/usr/bin/smbclient \
+ --with-amandahosts \
+ --with-ssh-security \
+ --with-bsdtcp-security \
+ --with-bsdudp-security \
+ --without-ipv6 \
+ --enable-s3-device
+
+ touch missing
+ touch configure-stamp
+
+build: build-arch build-indep
+build-arch: build-stamp
+build-indep: build-stamp
+build-stamp: configure-stamp
+ dh_testdir
+ MAILER=/usr/bin/mail $(MAKE) CFLAGS="$(CFLAGS) -O2 -g -Wall \
+ -DAMANDATES_FILE='\"/var/lib/amanda/amandates\"' \
+ -DIGNORE_TAR_ERRORS "
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ [ ! -f Makefile ] || make clean
+ [ ! -f Makefile ] || make distclean
+ -rm -f build-stamp configure-stamp missing config/config.h common-src/genversion
+ -find . -type d -name .deps -exec rm -rf {} \;
+ dh_clean
+
+# call this before packaging for upload when updating template English text
+updatepo:
+ -rm -f debian/po/templates.pot
+ debconf-updatepo
+
+binary-indep: build
+
+binary-arch: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs -a
+ make install DESTDIR=$(r)
+ sed -i "/dependency_libs/ s/'.*'/''/" `find $(r)/usr/lib/amanda/ -name '*.la'`
+ install -m 644 debian/amandahosts $(r)/etc/amandahosts
+ dh_installdocs -a
+ dh_installexamples -a
+ cp ChangeLog $(r)/usr/share/doc/amanda-common/changelog
+ cp example/xinetd.amandaserver $(r)/etc/xinetd.d/amanda
+ dh_installmenu -a
+ dh_installcron -a
+ dh_installchangelogs -a
+ dh_installdebconf -a
+ dh_installman -a
+ dh_strip -a
+ dh_compress -a
+ dh_movefiles -a --sourcedir=debian/amanda-common
+ rm -r $(r)/usr/share/amanda
+ dh_fixperms -av
+ # fix perms manually
+ chown -R backup:backup debian/*/var/lib/*
+ chmod -R u=rwX,g=rwX,o-rwx debian/*/var/lib/*
+ chown -R backup:backup $(s)/etc/amanda
+ chmod -R u=rwX,g=rwX,o-rwx $(s)/etc/amanda
+ chown -R backup:backup $(c)/var/lib/amanda/gnutar-lists
+ chmod -R u=rwX,g=rwX,o-rwx $(c)/var/lib/amanda/gnutar-lists
+ # .. setuid
+ chown root:backup \
+ $(c)/usr/lib/amanda/application/amgtar \
+ $(c)/usr/lib/amanda/application/amstar \
+ $(c)/usr/lib/amanda/calcsize \
+ $(c)/usr/lib/amanda/killpgrp \
+ $(c)/usr/lib/amanda/rundump \
+ $(c)/usr/lib/amanda/runtar \
+ $(s)/usr/lib/amanda/dumper \
+ $(s)/usr/lib/amanda/planner \
+ $(s)/usr/sbin/amcheck
+ chmod u=srwx,g=rx,o=r \
+ $(c)/usr/lib/amanda/application/amgtar \
+ $(c)/usr/lib/amanda/application/amstar \
+ $(c)/usr/lib/amanda/calcsize \
+ $(c)/usr/lib/amanda/killpgrp \
+ $(c)/usr/lib/amanda/rundump \
+ $(c)/usr/lib/amanda/runtar \
+ $(s)/usr/lib/amanda/dumper \
+ $(s)/usr/lib/amanda/planner \
+ $(s)/usr/sbin/amcheck
+ install -o root -g root -m 0644 debian/amanda-client.lintian \
+ $(c)/usr/share/lintian/overrides/amanda-client
+ install -o root -g root -m 0644 debian/amanda-common.lintian \
+ $(r)/usr/share/lintian/overrides/amanda-common
+ install -o root -g root -m 0644 debian/amanda-server.lintian \
+ $(s)/usr/share/lintian/overrides/amanda-server
+ dh_makeshlibs -pamanda-common --noscripts
+ dh_installdeb -a
+ dh_perl -a usr/lib/amanda/perl
+ dh_shlibdeps -a -l"debian/amanda-common/usr/lib:debian/amanda-client/usr/lib:debian/amanda-server/usr/lib"
+ # strip out the non-versioned amanda-common references, we need
+ # the versioned ones in the control file and dupes are ugly...
+ sed -e 's/amanda-common, //' < debian/amanda-server.substvars > debian/blah
+ mv debian/blah debian/amanda-server.substvars
+ sed -e 's/amanda-common, //' < debian/amanda-client.substvars > debian/blah
+ mv debian/blah debian/amanda-client.substvars
+ dh_gencontrol -a
+ dh_md5sums -a
+ dh_builddeb -a
+
+source diff:
+ @echo >&2 'source and diff are obsolete - use dpkg-source -b'; false
+
+binary: binary-indep binary-arch
+.PHONY: configure build-indep build-arch build clean binary-indep binary-arch binary
--- /dev/null
+3.0 (quilt)
--- /dev/null
+Template: amanda-common/merge_amandates
+Type: error
+_Description: Please merge /var/lib/amandates and /var/lib/amanda/amandates
+ You have both /var/lib/amandates and /var/lib/amanda/amandates. Please
+ review the files, and merge the contents you care about to the
+ /var/lib/amanda/amandates location, and remove the old file
+ /var/lib/amandates.
--- /dev/null
+# debian/watch for amanda
+# format version number, currently 3; this line is compulsory!
+version=3
+# If your package is located on sourceforge, use the following format
+# to automatically use the qa.debian.org redirector, avoiding SF's
+# difficult mirror system.
+http://sf.net/amanda/amanda-([0-9]+\.[0-9]+\.[0-9]+[^b]*)\.tar\.gz debian uupdate
# program - specify the dump system to use. Valid values are "DUMP",
# or "GNUTAR". Default: [program "DUMP"].
# record - record the backup in the time-stamp-database of the backup
-# program (e.g. /etc/dumpdates for DUMP or
+# program (e.g. /var/lib/dumpdates for DUMP or
# @GNUTAR_LISTED_INCREMENTAL_DIRX@ for GNUTAR.).
# Default: [record yes]
# skip-full - skip the disk when a level 0 is due, to allow full backups
define dumptype nocomp-test {
global
- comment "test dump without compression, no /etc/dumpdates recording"
+ comment "test dump without compression, no /var/lib/dumpdates recording"
compress none
record no
priority medium
define dumptype comp-test {
nocomp-test
- comment "test dump with compression, no /etc/dumpdates recording"
+ comment "test dump with compression, no /var/lib/dumpdates recording"
compress client fast
}
# program - specify the dump system to use. Valid values are "DUMP"
# "STAR" and "GNUTAR". Default: [program "DUMP"].
# record - record the backup in the time-stamp-database of the backup
-# program (e.g. /etc/dumpdates for DUMP or
+# program (e.g. /var/lib/dumpdates for DUMP or
# /var/lib/amanda/gnutar-lists for GNUTAR.).
# Default: [record yes]
# skip-full - skip the disk when a level 0 is due, to allow full backups
define dumptype nocomp-test {
global
- comment "test dump without compression, no /etc/dumpdates recording"
+ comment "test dump without compression, no /var/lib/dumpdates recording"
compress none
record no
priority medium
define dumptype comp-test {
nocomp-test
- comment "test dump with compression, no /etc/dumpdates recording"
+ comment "test dump with compression, no /var/lib/dumpdates recording"
compress client fast
}
\fBrecord\fR \fIboolean\fR
.RS 4
Default:
-\fByes\fR\&. Whether to ask the backup program to update its database (e\&.g\&.
-/etc/dumpdates
+\fIyes\fR\&. Whether to ask the backup program to update its database (e\&.g\&.
+/var/lib/dumpdates
for DUMP or
/usr/local/var/amanda/gnutar\-lists
for GNUTAR) of time stamps\&. This is normally enabled for daily backups and turned off for periodic archival runs\&.
\fBamanda\&.conf\fR
file\&.
\fIDumptype\fRs specify backup related parameters, such as whether to compress the backups, whether to record backup results in
-/etc/dumpdates, the disk\*(Aqs relative priority, etc\&.
+/var/lib/dumpdates, the disk\*(Aqs relative priority, etc\&.
.RE
.PP
\fIspindle\fR
<!ENTITY tapelist '<manref name="tapelist" vol="5"/>'>
<!-- IDs for files used by AMANDA-->
-<!ENTITY dumpdates '<filename>/etc/dumpdates</filename>'>
+<!ENTITY dumpdates '<filename>/var/lib/dumpdates</filename>'>
<!-- IDs for AMANDA commands-->
<!ENTITY amadmin ' <command>amadmin</command>'>
<term><amkeyword>record</amkeyword> <amtype>boolean</amtype></term>
<listitem>
<para>Default:
-<amkeyword>yes</amkeyword>.
-Whether to ask the backup program to update its database (e.g. <filename>/etc/dumpdates</filename>
+<emphasis remap='I'>yes</emphasis>.
+Whether to ask the backup program to update its database (e.g. <filename>/var/lib/dumpdates</filename>
for DUMP or <filename>/usr/local/var/amanda/gnutar-lists</filename> for GNUTAR) of time stamps.
This is normally enabled for daily backups and turned off for periodic archival runs.</para>
</listitem>
specify backup related parameters,
such as whether to compress the backups,
whether to record backup results in
-<filename>/etc/dumpdates</filename>, the disk's relative priority, etc.</para>
+<filename>/var/lib/dumpdates</filename>, the disk's relative priority, etc.</para>
</listitem>
</varlistentry>
<varlistentry>
char *clnt_decrypt_opt; /* client-side decryption option parameter to use */
double comprate[2]; /* default compression rates */
/* flag options */
- int record; /* record dump in /etc/dumpdates ? */
+ int record; /* record dump in /var/lib/dumpdates ? */
int skip_incr; /* incs done externally ? */
int skip_full; /* fulls done externally ? */
int to_holdingdisk; /* use holding disk ? */