drivers/stlink_usb: check error code returned by st-link

Most of ST-Link commands return an error code, but this is almost
never checked.

Check for the error code for every command that returns it.

Change-Id: Ifc4e32f8c73196de23700ba0989bfdfe0f5b46e3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4825
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

diff --git a/src/jtag/drivers/stlink_usb.c b/src/jtag/drivers/stlink_usb.c
index 9ba4f4af987212360281eac2f0b8b279d94296be..64c44d90dad443e9804005f7452164ba89f1d978 100644 (file)
--- a/src/jtag/drivers/stlink_usb.c
+++ b/src/jtag/drivers/stlink_usb.c
@@ -644,8 +644,9 @@ static int stlink_usb_xfer_v1_get_sense(void *handle)
        transfers block in cmdbuf
        <size> indicates number of bytes in the following
        data phase.
+       Ignore the (eventual) error code in the received packet.
 */
-static int stlink_usb_xfer(void *handle, const uint8_t *buf, int size)
+static int stlink_usb_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
 {
        int err, cmdsize = STLINK_CMD_SIZE_V2;
        struct stlink_usb_handle_s *h = handle;
@@ -766,6 +767,22 @@ static int stlink_usb_error_check(void *handle)
        }
 }
 
+/*
+ * Wrapper around stlink_usb_xfer_noerrcheck()
+ * to check the error code in the received packet
+ */
+static int stlink_usb_xfer_errcheck(void *handle, const uint8_t *buf, int size)
+{
+       int retval;
+
+       assert(size > 0);
+
+       retval = stlink_usb_xfer_noerrcheck(handle, buf, size);
+       if (retval != ERROR_OK)
+               return retval;
+
+       return stlink_usb_error_check(handle);
+}
 
 /** Issue an STLINK command via USB transfer, with retries on any wait status responses.
 
@@ -782,7 +799,7 @@ static int stlink_cmd_allow_retry(void *handle, const uint8_t *buf, int size)
 
        while (1) {
                if ((h->transport != HL_TRANSPORT_SWIM) || !retries) {
-                       res = stlink_usb_xfer(handle, buf, size);
+                       res = stlink_usb_xfer_noerrcheck(handle, buf, size);
                        if (res != ERROR_OK)
                                return res;
                }
@@ -886,7 +903,7 @@ static int stlink_usb_version(void *handle)
 
        h->cmdbuf[h->cmdidx++] = STLINK_GET_VERSION;
 
-       res = stlink_usb_xfer(handle, h->databuf, 6);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 6);
 
        if (res != ERROR_OK)
                return res;
@@ -927,7 +944,7 @@ static int stlink_usb_version(void *handle)
 
                h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_VERSION_EX;
 
-               res = stlink_usb_xfer(handle, h->databuf, 12);
+               res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 12);
                if (res != ERROR_OK)
                        return res;
 
@@ -1035,7 +1052,7 @@ static int stlink_usb_check_voltage(void *handle, float *target_voltage)
 
        h->cmdbuf[h->cmdidx++] = STLINK_GET_TARGET_VOLTAGE;
 
-       int result = stlink_usb_xfer(handle, h->databuf, 8);
+       int result = stlink_usb_xfer_noerrcheck(handle, h->databuf, 8);
 
        if (result != ERROR_OK)
                return result;
@@ -1114,7 +1131,7 @@ static int stlink_usb_current_mode(void *handle, uint8_t *mode)
 
        h->cmdbuf[h->cmdidx++] = STLINK_GET_CURRENT_MODE;
 
-       res = stlink_usb_xfer(handle, h->databuf, 2);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2);
 
        if (res != ERROR_OK)
                return res;
@@ -1202,7 +1219,7 @@ static int stlink_usb_mode_leave(void *handle, enum stlink_mode type)
                        return ERROR_FAIL;
        }
 
-       res = stlink_usb_xfer(handle, 0, 0);
+       res = stlink_usb_xfer_noerrcheck(handle, 0, 0);
 
        if (res != ERROR_OK)
                return res;
@@ -1348,7 +1365,8 @@ static int stlink_swim_status(void *handle)
        stlink_usb_init_buffer(handle, h->rx_ep, 4);
        h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
        h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READSTATUS;
-       res = stlink_usb_xfer(handle, h->databuf, 4);
+       /* error is checked by the caller */
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4);
        if (res != ERROR_OK)
                return res;
        return ERROR_OK;
@@ -1368,7 +1386,7 @@ static int stlink_swim_cap(void *handle, uint8_t *cap)
        h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
        h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READ_CAP;
        h->cmdbuf[h->cmdidx++] = 0x01;
-       res = stlink_usb_xfer(handle, h->databuf, 8);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 8);
        if (res != ERROR_OK)
                return res;
        memcpy(cap, h->databuf, 8);
@@ -1525,7 +1543,7 @@ static int stlink_swim_readbytes(void *handle, uint32_t addr, uint32_t len, uint
        stlink_usb_init_buffer(handle, h->rx_ep, len);
        h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
        h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READBUF;
-       res = stlink_usb_xfer(handle, data, len);
+       res = stlink_usb_xfer_noerrcheck(handle, data, len);
        if (res != ERROR_OK)
                return res;
 
@@ -1551,7 +1569,7 @@ static int stlink_usb_idcode(void *handle, uint32_t *idcode)
        h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
        h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READCOREID;
 
-       res = stlink_usb_xfer(handle, h->databuf, 4);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4);
 
        if (res != ERROR_OK)
                return res;
@@ -1621,7 +1639,7 @@ static int stlink_usb_trace_read(void *handle, uint8_t *buf, size_t *size)
                h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
                h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GET_TRACE_NB;
 
-               res = stlink_usb_xfer(handle, h->databuf, 2);
+               res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2);
                if (res != ERROR_OK)
                        return res;
 
@@ -1698,7 +1716,7 @@ static enum target_state stlink_usb_state(void *handle)
        h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
        h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_GETSTATUS;
 
-       res = stlink_usb_xfer(handle, h->databuf, 2);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2);
 
        if (res != ERROR_OK)
                return TARGET_UNKNOWN;
@@ -1749,7 +1767,7 @@ static void stlink_usb_trace_disable(void *handle)
        stlink_usb_init_buffer(handle, h->rx_ep, 2);
        h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
        h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_STOP_TRACE_RX;
-       res = stlink_usb_xfer(handle, h->databuf, 2);
+       res = stlink_usb_xfer_errcheck(handle, h->databuf, 2);
 
        if (res == ERROR_OK)
                h->trace.enabled = false;
@@ -1774,7 +1792,7 @@ static int stlink_usb_trace_enable(void *handle)
                h_u32_to_le(h->cmdbuf+h->cmdidx, h->trace.source_hz);
                h->cmdidx += 4;
 
-               res = stlink_usb_xfer(handle, h->databuf, 2);
+               res = stlink_usb_xfer_errcheck(handle, h->databuf, 2);
 
                if (res == ERROR_OK)  {
                        h->trace.enabled = true;
@@ -1901,11 +1919,11 @@ static int stlink_usb_read_regs(void *handle)
        if (h->version.jtag_api == STLINK_JTAG_API_V1) {
 
                h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READALLREGS;
-               res = stlink_usb_xfer(handle, h->databuf, 84);
+               res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 84);
                /* regs data from offset 0 */
        } else {
                h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READALLREGS;
-               res = stlink_usb_xfer(handle, h->databuf, 88);
+               res = stlink_usb_xfer_errcheck(handle, h->databuf, 88);
                /* status at offset 0, regs data from offset 4 */
        }
 
@@ -1930,7 +1948,7 @@ static int stlink_usb_read_reg(void *handle, int num, uint32_t *val)
        h->cmdbuf[h->cmdidx++] = num;
 
        if (h->version.jtag_api == STLINK_JTAG_API_V1) {
-               res = stlink_usb_xfer(handle, h->databuf, 4);
+               res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4);
                if (res != ERROR_OK)
                        return res;
                *val = le_to_h_u32(h->databuf);
@@ -1967,7 +1985,6 @@ static int stlink_usb_write_reg(void *handle, int num, uint32_t val)
 
 static int stlink_usb_get_rw_status(void *handle)
 {
-       int res;
        struct stlink_usb_handle_s *h = handle;
 
        assert(handle != NULL);
@@ -1980,18 +1997,11 @@ static int stlink_usb_get_rw_status(void *handle)
        h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
        if (h->version.flags & STLINK_F_HAS_GETLASTRWSTATUS2) {
                h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS2;
-
-               res = stlink_usb_xfer(handle, h->databuf, 12);
+               return stlink_usb_xfer_errcheck(handle, h->databuf, 12);
        } else {
                h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS;
-
-               res = stlink_usb_xfer(handle, h->databuf, 2);
+               return stlink_usb_xfer_errcheck(handle, h->databuf, 2);
        }
-
-       if (res != ERROR_OK)
-               return res;
-
-       return stlink_usb_error_check(h);
 }
 
 /** */
@@ -2023,7 +2033,7 @@ static int stlink_usb_read_mem8(void *handle, uint32_t addr, uint16_t len,
        if (read_len == 1)
                read_len++;
 
-       res = stlink_usb_xfer(handle, h->databuf, read_len);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, read_len);
 
        if (res != ERROR_OK)
                return res;
@@ -2057,7 +2067,7 @@ static int stlink_usb_write_mem8(void *handle, uint32_t addr, uint16_t len,
        h_u16_to_le(h->cmdbuf+h->cmdidx, len);
        h->cmdidx += 2;
 
-       res = stlink_usb_xfer(handle, buffer, len);
+       res = stlink_usb_xfer_noerrcheck(handle, buffer, len);
 
        if (res != ERROR_OK)
                return res;
@@ -2092,7 +2102,7 @@ static int stlink_usb_read_mem16(void *handle, uint32_t addr, uint16_t len,
        h_u16_to_le(h->cmdbuf+h->cmdidx, len);
        h->cmdidx += 2;
 
-       res = stlink_usb_xfer(handle, h->databuf, len);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, len);
 
        if (res != ERROR_OK)
                return res;
@@ -2129,7 +2139,7 @@ static int stlink_usb_write_mem16(void *handle, uint32_t addr, uint16_t len,
        h_u16_to_le(h->cmdbuf+h->cmdidx, len);
        h->cmdidx += 2;
 
-       res = stlink_usb_xfer(handle, buffer, len);
+       res = stlink_usb_xfer_noerrcheck(handle, buffer, len);
 
        if (res != ERROR_OK)
                return res;
@@ -2161,7 +2171,7 @@ static int stlink_usb_read_mem32(void *handle, uint32_t addr, uint16_t len,
        h_u16_to_le(h->cmdbuf+h->cmdidx, len);
        h->cmdidx += 2;
 
-       res = stlink_usb_xfer(handle, h->databuf, len);
+       res = stlink_usb_xfer_noerrcheck(handle, h->databuf, len);
 
        if (res != ERROR_OK)
                return res;
@@ -2195,7 +2205,7 @@ static int stlink_usb_write_mem32(void *handle, uint32_t addr, uint16_t len,
        h_u16_to_le(h->cmdbuf+h->cmdidx, len);
        h->cmdidx += 2;
 
-       res = stlink_usb_xfer(handle, buffer, len);
+       res = stlink_usb_xfer_noerrcheck(handle, buffer, len);
 
        if (res != ERROR_OK)
                return res;
@@ -2516,7 +2526,7 @@ static int stlink_get_com_freq(void *handle, bool is_jtag, struct speed_map *map
        h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_COM_FREQ;
        h->cmdbuf[h->cmdidx++] = is_jtag ? 1 : 0;
 
-       int res = stlink_usb_xfer(handle, h->databuf, 52);
+       int res = stlink_usb_xfer_errcheck(handle, h->databuf, 52);
 
        int size = h->databuf[8];
 
@@ -2553,7 +2563,7 @@ static int stlink_set_com_freq(void *handle, bool is_jtag, unsigned int frequenc
 
        h_u32_to_le(&h->cmdbuf[4], frequency);
 
-       return stlink_usb_xfer(handle, h->databuf, 8);
+       return stlink_usb_xfer_errcheck(handle, h->databuf, 8);
 }
 
 static int stlink_speed_v3(void *handle, bool is_jtag, int khz, bool query)