Found by grepping for pointer casts.
Change-Id: Ibd8f22a9e9ca71459ba0bedc8447a3623d0e4184
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1773
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
};
retval = target_write_buffer(target, write_algorithm->address,
};
retval = target_write_buffer(target, write_algorithm->address,
- sizeof(stm32x_flash_write_code), (uint8_t *)stm32x_flash_write_code);
+ sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
int user_data = optionbyte;
int user_data = optionbyte;
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_ERROR, 1))
+ if (optionbyte >> OPT_ERROR & 1)
command_print(CMD_CTX, "Option Byte Complement Error");
command_print(CMD_CTX, "Option Byte Complement Error");
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_READOUT, 1))
+ if (optionbyte >> OPT_READOUT & 1)
command_print(CMD_CTX, "Readout Protection On");
else
command_print(CMD_CTX, "Readout Protection Off");
command_print(CMD_CTX, "Readout Protection On");
else
command_print(CMD_CTX, "Readout Protection Off");
/* user option bytes are offset depending on variant */
optionbyte >>= stm32x_info->option_offset;
/* user option bytes are offset depending on variant */
optionbyte >>= stm32x_info->option_offset;
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDWDGSW, 1))
+ if (optionbyte >> OPT_RDWDGSW & 1)
command_print(CMD_CTX, "Software Watchdog");
else
command_print(CMD_CTX, "Hardware Watchdog");
command_print(CMD_CTX, "Software Watchdog");
else
command_print(CMD_CTX, "Hardware Watchdog");
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTOP, 1))
+ if (optionbyte >> OPT_RDRSTSTOP & 1)
command_print(CMD_CTX, "Stop: No reset generated");
else
command_print(CMD_CTX, "Stop: Reset generated");
command_print(CMD_CTX, "Stop: No reset generated");
else
command_print(CMD_CTX, "Stop: Reset generated");
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTDBY, 1))
+ if (optionbyte >> OPT_RDRSTSTDBY & 1)
command_print(CMD_CTX, "Standby: No reset generated");
else
command_print(CMD_CTX, "Standby: Reset generated");
if (stm32x_info->has_dual_banks) {
command_print(CMD_CTX, "Standby: No reset generated");
else
command_print(CMD_CTX, "Standby: Reset generated");
if (stm32x_info->has_dual_banks) {
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_BFB2, 1))
+ if (optionbyte >> OPT_BFB2 & 1)
command_print(CMD_CTX, "Boot: Bank 0");
else
command_print(CMD_CTX, "Boot: Bank 1");
command_print(CMD_CTX, "Boot: Bank 0");
else
command_print(CMD_CTX, "Boot: Bank 1");