Giving the example of STM32WL55x the examine log is the following:
Info : stm32wlx.cpu0: hardware has 6 breakpoints, 4 watchpoints
Info : stm32wlx.cpu1: hardware has 4 breakpoints, 2 watchpoints
After this change the examine log becomes:
Info : stm32wlx.cpu0: Cortex-M4 r0p1 processor detected
Info : stm32wlx.cpu0: target has 6 breakpoints, 4 watchpoints
Info : stm32wlx.cpu1: Cortex-M0+ r0p1 processor detected
Info : stm32wlx.cpu1: target has 4 breakpoints, 2 watchpoints
Change-Id: I1873a75eb76f0819342c441129427b38e984f0df
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6553
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
armv7m->arm.arch = cortex_m->core_info->arch;
armv7m->arm.arch = cortex_m->core_info->arch;
- LOG_DEBUG("%s r%" PRId8 "p%" PRId8 " processor detected",
- cortex_m->core_info->name, (uint8_t)((cpuid >> 20) & 0xf), (uint8_t)((cpuid >> 0) & 0xf));
+ LOG_INFO("%s: %s r%" PRId8 "p%" PRId8 " processor detected",
+ target_name(target),
+ cortex_m->core_info->name,
+ (uint8_t)((cpuid >> 20) & 0xf),
+ (uint8_t)((cpuid >> 0) & 0xf));
+
cortex_m->maskints_erratum = false;
if (core_partno == CORTEX_M7_PARTNO) {
uint8_t rev, patch;
cortex_m->maskints_erratum = false;
if (core_partno == CORTEX_M7_PARTNO) {
uint8_t rev, patch;
cortex_m_dwt_setup(cortex_m, target);
/* These hardware breakpoints only work for code in flash! */
cortex_m_dwt_setup(cortex_m, target);
/* These hardware breakpoints only work for code in flash! */
- LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
+ LOG_INFO("%s: target has %d breakpoints, %d watchpoints",
target_name(target),
cortex_m->fp_num_code,
cortex_m->dwt_num_comp);
target_name(target),
cortex_m->fp_num_code,
cortex_m->dwt_num_comp);