Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.
Change-Id: I7b4cae1798ff5ea048fcbc671a397af763fdc605
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6218
Tested-by: jenkins
vice versa.
- Alphabetize the \@defn declarations for all commands in each
section.
vice versa.
- Alphabetize the \@defn declarations for all commands in each
section.
-- Keep the per-command documentation focussed on exactly what that
+- Keep the per-command documentation focused on exactly what that
command does, not motivation, advice, suggestions, or big examples.
When commands deserve such expanded text, it belongs elsewhere.
Solutions might be using a \@section explaining a cluster of related
command does, not motivation, advice, suggestions, or big examples.
When commands deserve such expanded text, it belongs elsewhere.
Solutions might be using a \@section explaining a cluster of related
@enumerate
@item @b{Transport} Does it support the kind of communication that you need?
@enumerate
@item @b{Transport} Does it support the kind of communication that you need?
-OpenOCD focusses mostly on JTAG. Your version may also support
+OpenOCD focuses mostly on JTAG. Your version may also support
other ways to communicate with target devices.
@item @b{Voltage} What voltage is your target - 1.8, 2.8, 3.3, or 5V?
Does your dongle support it? You might need a level converter.
other ways to communicate with target devices.
@item @b{Voltage} What voltage is your target - 1.8, 2.8, 3.3, or 5V?
Does your dongle support it? You might need a level converter.
'flash probe @var{bank_id}' is executed.
Normal OpenOCD commands like @command{mdw} can be used to display the flash content,
'flash probe @var{bank_id}' is executed.
Normal OpenOCD commands like @command{mdw} can be used to display the flash content,
-but only after proper controller initialization as decribed above. However,
+but only after proper controller initialization as described above. However,
due to a silicon bug in some devices, attempting to access the very last word
should be avoided.
due to a silicon bug in some devices, attempting to access the very last word
should be avoided.
remember to pop them off when the ISR is done.
@b{Also note:} If you have a multi-threaded operating system, they
remember to pop them off when the ISR is done.
@b{Also note:} If you have a multi-threaded operating system, they
-often do not @b{in the intrest of saving memory} waste these few
+often do not @b{in the interest of saving memory} waste these few
/** Update the duration->start field to start the @a duration measurement. */
int duration_start(struct duration *duration);
/** Update the duration->start field to start the @a duration measurement. */
int duration_start(struct duration *duration);
-/** Update the duration->elapsed field to finish the @a duration measurment. */
+/** Update the duration->elapsed field to finish the @a duration measurement. */
int duration_measure(struct duration *duration);
/** @returns Elapsed time in seconds. */
int duration_measure(struct duration *duration);
/** @returns Elapsed time in seconds. */
return ERROR_FAIL;
}
/* check first member, the '_mqx_kernel_data->ADDRESSING_CAPABILITY'.
return ERROR_FAIL;
}
/* check first member, the '_mqx_kernel_data->ADDRESSING_CAPABILITY'.
- it supose to be set to value 8 */
+ it suppose to be set to value 8 */
if (capability_value != 8) {
LOG_WARNING("MQX RTOS - value of '_mqx_kernel_data->ADDRESSING_CAPABILITY' contains invalid value");
return ERROR_FAIL;
if (capability_value != 8) {
LOG_WARNING("MQX RTOS - value of '_mqx_kernel_data->ADDRESSING_CAPABILITY' contains invalid value");
return ERROR_FAIL;
-PSUEDO-Code from Xilinx Appnote XAPP067.pdf :
+PSEUDO-Code from Xilinx Appnote XAPP067.pdf :
the following pseudo code clarifies the intent of the xrepeat support.The
flow given is for the entire processing of an SVF file, not an XSVF file.
the following pseudo code clarifies the intent of the xrepeat support.The
flow given is for the entire processing of an SVF file, not an XSVF file.