projects
/
web
/
altusmetrum
/ commitdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
| commitdiff |
tree
raw
|
patch
|
inline
| side by side (from parent 1:
415edfe
)
more cosmetics
author
Bdale Garbee
<bdale@gag.com>
Sat, 6 Feb 2010 20:00:08 +0000
(13:00 -0700)
committer
Bdale Garbee
<bdale@gag.com>
Sat, 6 Feb 2010 20:00:08 +0000
(13:00 -0700)
TeleMetrum/index.mdwn
patch
|
blob
|
history
diff --git
a/TeleMetrum/index.mdwn
b/TeleMetrum/index.mdwn
index a98fcac5a2a07bbdcbcff8fc96f7cc8e1a00a59a..a7f4abab5d687847cc11bf3096e22864dea106d0 100644
(file)
--- a/
TeleMetrum/index.mdwn
+++ b/
TeleMetrum/index.mdwn
@@
-120,14
+120,14
@@
always want GPS on board, which lead to our current second generation boards.
* The v0.1 artwork had three issues, two of which required physical rework
on each board. All of these issues were fixed in v0.2.
* The v0.1 artwork had three issues, two of which required physical rework
on each board. All of these issues were fixed in v0.2.
- *
t
he USB connector footprint was placed wrong, so that the
+ *
T
he USB connector footprint was placed wrong, so that the
connector hung out over the edge of the board instead of being
flush.
connector hung out over the edge of the board instead of being
flush.
- *
w
e needed chip select on the SPI memory. To fix that, we gave up the
+ *
W
e needed chip select on the SPI memory. To fix that, we gave up the
ability to put the accelerometer into self-test mode and used that
GPIO line to pull chip select on the memory, which required two
cuts and two jumpers.
ability to put the accelerometer into self-test mode and used that
GPIO line to pull chip select on the memory, which required two
cuts and two jumpers.
- *
t
he igniter sense circuits each needed a second resistor to
+ *
T
he igniter sense circuits each needed a second resistor to
complete the voltage divider so our 3.3V CPU ADC could read the
5V ejection voltage. This was fixed by changing two resistor
values, and tacking two additional resistors onto the board
complete the voltage divider so our 3.3V CPU ADC could read the
5V ejection voltage. This was fixed by changing two resistor
values, and tacking two additional resistors onto the board