X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=usrp2%2Ffirmware%2Flib%2Fdb_init_wbx.c;fp=usrp2%2Ffirmware%2Flib%2Fdb_init_wbx.c;h=8810e0d4d2cdff6404c71157b99de3c3cd7bd145;hb=35e43e8d8c271e6842191cac3fc3f2f88a861183;hp=0000000000000000000000000000000000000000;hpb=ea29b08aeb54227e6628f655ccfdb96fe4d8c378;p=debian%2Fgnuradio
diff --git a/usrp2/firmware/lib/db_init_wbx.c b/usrp2/firmware/lib/db_init_wbx.c
new file mode 100644
index 00000000..8810e0d4
--- /dev/null
+++ b/usrp2/firmware/lib/db_init_wbx.c
@@ -0,0 +1,404 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2008,2009 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+
+struct db_base *tx_dboard; // the tx daughterboard that's installed
+struct db_base *rx_dboard; // the rx daughterboard that's installed
+
+extern struct db_base db_basic_tx;
+extern struct db_base db_basic_rx;
+extern struct db_base db_lf_tx;
+extern struct db_base db_lf_rx;
+extern struct db_base db_wbxng_rx;
+extern struct db_base db_wbxng_tx;
+
+struct db_base *all_dboards[] = {
+ &db_basic_tx,
+ &db_basic_rx,
+ &db_lf_tx,
+ &db_lf_rx,
+ &db_wbxng_rx,
+ &db_wbxng_tx,
+ 0
+};
+
+
+typedef enum { UDBE_OK, UDBE_NO_EEPROM, UDBE_INVALID_EEPROM } usrp_dbeeprom_status_t;
+
+static usrp_dbeeprom_status_t
+read_raw_dboard_eeprom (unsigned char *buf, int i2c_addr)
+{
+ if (!eeprom_read (i2c_addr, 0, buf, DB_EEPROM_CLEN))
+ return UDBE_NO_EEPROM;
+
+ if (buf[DB_EEPROM_MAGIC] != DB_EEPROM_MAGIC_VALUE)
+ return UDBE_INVALID_EEPROM;
+
+ int sum = 0;
+ unsigned int i;
+ for (i = 0; i < DB_EEPROM_CLEN; i++)
+ sum += buf[i];
+
+ if ((sum & 0xff) != 0)
+ return UDBE_INVALID_EEPROM;
+
+ return UDBE_OK;
+}
+
+
+/*
+ * Return DBID, -1 or -2
+ */
+int
+read_dboard_eeprom(int i2c_addr)
+{
+ unsigned char buf[DB_EEPROM_CLEN];
+
+ usrp_dbeeprom_status_t s = read_raw_dboard_eeprom (buf, i2c_addr);
+
+ //printf("\nread_raw_dboard_eeprom: %d\n", s);
+
+ switch (s){
+ case UDBE_OK:
+ return (buf[DB_EEPROM_ID_MSB] << 8) | buf[DB_EEPROM_ID_LSB];
+
+ case UDBE_NO_EEPROM:
+ default:
+ return -1;
+
+ case UDBE_INVALID_EEPROM:
+ return -2;
+ }
+}
+
+
+static struct db_base *
+lookup_dbid(int dbid)
+{
+ if (dbid < 0)
+ return 0;
+
+ int i;
+ for (i = 0; all_dboards[i]; i++)
+ if (all_dboards[i]->dbid == dbid)
+ return all_dboards[i];
+
+ return 0;
+}
+
+static struct db_base *
+lookup_dboard(int i2c_addr, struct db_base *default_db, char *msg)
+{
+ struct db_base *db;
+ int dbid = read_dboard_eeprom(i2c_addr);
+
+ // FIXME removing this printf has the system hang if there are two d'boards
+ // installed. (I think the problem is in i2c_read/write or the way
+ // I kludge the zero-byte write to set the read address in eeprom_read.)
+ printf("%s dbid: 0x%x\n", msg, dbid);
+
+ if (dbid < 0){ // there was some kind of problem. Treat as Basic Tx
+ return default_db;
+ }
+ else if ((db = lookup_dbid(dbid)) == 0){
+ printf("No daugherboard code for dbid = 0x%x\n", dbid);
+ return default_db;
+ }
+ return db;
+}
+
+void
+set_atr_regs(int bank, struct db_base *db)
+{
+ uint32_t val[4];
+ int shift;
+ int mask;
+ int i;
+
+ val[ATR_IDLE] = db->atr_rxval;
+ val[ATR_RX] = db->atr_rxval;
+ val[ATR_TX] = db->atr_txval;
+ val[ATR_FULL] = db->atr_txval;
+
+ if (bank == GPIO_TX_BANK){
+ mask = 0xffff0000;
+ shift = 16;
+ }
+ else {
+ mask = 0x0000ffff;
+ shift = 0;
+ }
+
+ for (i = 0; i < 4; i++){
+ int t = (atr_regs->v[i] & ~mask) | ((val[i] << shift) & mask);
+ //printf("atr_regs[%d] = 0x%x\n", i, t);
+ atr_regs->v[i] = t;
+ }
+}
+
+static void
+set_gpio_mode(int bank, struct db_base *db)
+{
+ int i;
+
+ hal_gpio_set_ddr(bank, db->output_enables, 0xffff);
+ set_atr_regs(bank, db);
+
+ for (i = 0; i < 16; i++){
+ if (db->used_pins & (1 << i)){
+ // set to either GPIO_SEL_SW or GPIO_SEL_ATR
+ hal_gpio_set_sel(bank, i, (db->atr_mask & (1 << i)) ? 'a' : 's');
+ }
+ }
+}
+
+static int __attribute__((unused))
+determine_tx_mux_value(struct db_base *db)
+{
+ if (db->i_and_q_swapped)
+ return 0x01;
+ else
+ return 0x10;
+}
+
+static int
+determine_rx_mux_value(struct db_base *db)
+{
+#define ADC0 0x0
+#define ADC1 0x1
+#define ZERO 0x2
+
+ static int truth_table[8] = {
+ /* swap_iq, uses */
+ /* 0, 0x0 */ (ZERO << 2) | ZERO, // N/A
+ /* 0, 0x1 */ (ZERO << 2) | ADC0,
+ /* 0, 0x2 */ (ZERO << 2) | ADC1,
+ /* 0, 0x3 */ (ADC1 << 2) | ADC0,
+ /* 1, 0x0 */ (ZERO << 2) | ZERO, // N/A
+ /* 1, 0x1 */ (ZERO << 2) | ADC0,
+ /* 1, 0x2 */ (ZERO << 2) | ADC1,
+ /* 1, 0x3 */ (ADC0 << 2) | ADC1,
+ };
+
+ int subdev0_uses;
+ int subdev1_uses;
+ int uses;
+
+ if (db->is_quadrature)
+ subdev0_uses = 0x3; // uses A/D 0 and 1
+ else
+ subdev0_uses = 0x1; // uses A/D 0 only
+
+ // FIXME second subdev on Basic Rx, LF RX
+ // if subdev2 exists
+ // subdev1_uses = 0x2;
+ subdev1_uses = 0;
+
+ uses = subdev0_uses;
+
+ int swap_iq = db->i_and_q_swapped & 0x1;
+ int index = (swap_iq << 2) | uses;
+
+ return truth_table[index];
+}
+
+
+void
+db_init(void)
+{
+ int m;
+
+ tx_dboard = lookup_dboard(I2C_ADDR_TX_A, &db_basic_tx, "Tx");
+ //printf("db_init: tx dbid = 0x%x\n", tx_dboard->dbid);
+ set_gpio_mode(GPIO_TX_BANK, tx_dboard);
+ tx_dboard->init(tx_dboard);
+ m = determine_tx_mux_value(tx_dboard);
+ dsp_tx_regs->tx_mux = m;
+ //printf("tx_mux = 0x%x\n", m);
+ tx_dboard->current_lo_offset = tx_dboard->default_lo_offset;
+
+ rx_dboard = lookup_dboard(I2C_ADDR_RX_A, &db_basic_rx, "Rx");
+ //printf("db_init: rx dbid = 0x%x\n", rx_dboard->dbid);
+ set_gpio_mode(GPIO_RX_BANK, rx_dboard);
+ rx_dboard->init(rx_dboard);
+ m = determine_rx_mux_value(rx_dboard);
+ dsp_rx_regs->rx_mux = m;
+ //printf("rx_mux = 0x%x\n", m);
+ rx_dboard->current_lo_offset = rx_dboard->default_lo_offset;
+}
+
+/*!
+ * Calculate the frequency to use for setting the digital down converter.
+ *
+ * \param[in] target_freq desired RF frequency (Hz)
+ * \param[in] baseband_freq the RF frequency that corresponds to DC in the IF.
+ *
+ * \param[out] dxc_freq is the value for the ddc
+ * \param[out] inverted is true if we're operating in an inverted Nyquist zone.
+*/
+void
+calc_dxc_freq(u2_fxpt_freq_t target_freq, u2_fxpt_freq_t baseband_freq,
+ u2_fxpt_freq_t *dxc_freq, bool *inverted)
+{
+ u2_fxpt_freq_t fs = U2_DOUBLE_TO_FXPT_FREQ(100e6); // converter sample rate
+ u2_fxpt_freq_t delta = target_freq - baseband_freq;
+
+#if 0
+ printf("calc_dxc_freq\n");
+ printf(" fs = "); print_fxpt_freq(fs); newline();
+ printf(" target = "); print_fxpt_freq(target_freq); newline();
+ printf(" baseband = "); print_fxpt_freq(baseband_freq); newline();
+ printf(" delta = "); print_fxpt_freq(delta); newline();
+#endif
+
+ if (delta >= 0){
+ while (delta > fs)
+ delta -= fs;
+ if (delta <= fs/2){ // non-inverted region
+ *dxc_freq = -delta;
+ *inverted = false;
+ }
+ else { // inverted region
+ *dxc_freq = delta - fs;
+ *inverted = true;
+ }
+ }
+ else {
+ while (delta < -fs)
+ delta += fs;
+ if (delta >= -fs/2){ // non-inverted region
+ *dxc_freq = -delta;
+ *inverted = false;
+ }
+ else { // inverted region
+ *dxc_freq = delta + fs;
+ *inverted = true;
+ }
+ }
+}
+
+bool
+db_set_lo_offset(struct db_base *db, u2_fxpt_freq_t offset)
+{
+ db->current_lo_offset = offset;
+ return true;
+}
+
+bool
+db_tune(struct db_base *db, u2_fxpt_freq_t target_freq, struct tune_result *result)
+{
+ memset(result, 0, sizeof(*result));
+ bool inverted = false;
+ u2_fxpt_freq_t dxc_freq;
+ u2_fxpt_freq_t actual_dxc_freq;
+
+ // Ask the d'board to tune as closely as it can to target_freq+lo_offset
+ bool ok = db->set_freq(db, target_freq+db->current_lo_offset, &result->baseband_freq);
+
+ // Calculate the DDC setting that will downconvert the baseband from the
+ // daughterboard to our target frequency.
+ calc_dxc_freq(target_freq, result->baseband_freq, &dxc_freq, &inverted);
+
+ // If the spectrum is inverted, and the daughterboard doesn't do
+ // quadrature downconversion, we can fix the inversion by flipping the
+ // sign of the dxc_freq... (This only happens using the basic_rx board)
+
+ if (db->spectrum_inverted)
+ inverted = !inverted;
+
+ if (inverted && !db->is_quadrature){
+ dxc_freq = -dxc_freq;
+ inverted = !inverted;
+ }
+
+ if (db->is_tx){
+ dxc_freq = -dxc_freq; // down conversion versus up conversion
+ ok &= db_set_duc_freq(dxc_freq, &actual_dxc_freq);
+ }
+ else {
+ ok &= db_set_ddc_freq(dxc_freq, &actual_dxc_freq);
+ }
+
+ result->dxc_freq = dxc_freq;
+ result->residual_freq = dxc_freq - actual_dxc_freq;
+ result->inverted = inverted;
+ return ok;
+}
+
+static int32_t
+compute_freq_control_word(u2_fxpt_freq_t target_freq, u2_fxpt_freq_t *actual_freq)
+{
+ // If we were using floating point, we'd calculate
+ // master = 100e6;
+ // v = (int) rint(target_freq / master_freq) * pow(2.0, 32.0);
+
+ //printf("compute_freq_control_word\n");
+ //printf(" target_freq = "); print_fxpt_freq(target_freq); newline();
+
+ int32_t master_freq = 100000000; // 100M
+
+ int32_t v = ((target_freq << 12)) / master_freq;
+ //printf(" fcw = %d\n", v);
+
+ *actual_freq = (v * (int64_t) master_freq) >> 12;
+
+ //printf(" actual = "); print_fxpt_freq(*actual_freq); newline();
+
+ return v;
+}
+
+
+bool
+db_set_ddc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq)
+{
+ int32_t v = compute_freq_control_word(dxc_freq, actual_dxc_freq);
+ dsp_rx_regs->freq = v;
+ return true;
+}
+
+bool
+db_set_duc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq)
+{
+ int32_t v = compute_freq_control_word(dxc_freq, actual_dxc_freq);
+ dsp_tx_regs->freq = v;
+ return true;
+}
+
+bool
+db_set_gain(struct db_base *db, u2_fxpt_gain_t gain)
+{
+ return db->set_gain(db, gain);
+}
+
+bool
+db_set_antenna(struct db_base *db, int ant)
+{
+ if (db->set_antenna == 0) return false;
+ return db->set_antenna(db, ant);
+}