X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=usrp2%2Ffirmware%2Flib%2Fadf4350.c;fp=usrp2%2Ffirmware%2Flib%2Fadf4350.c;h=dbab654ea30bdeca9bbfdb141a279776d6788810;hb=35e43e8d8c271e6842191cac3fc3f2f88a861183;hp=0000000000000000000000000000000000000000;hpb=ea29b08aeb54227e6628f655ccfdb96fe4d8c378;p=debian%2Fgnuradio
diff --git a/usrp2/firmware/lib/adf4350.c b/usrp2/firmware/lib/adf4350.c
new file mode 100644
index 00000000..dbab654e
--- /dev/null
+++ b/usrp2/firmware/lib/adf4350.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2010 Free Software Foundation, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#include "adf4350.h"
+#include "adf4350_regs.h"
+#include "db_wbxng.h"
+#include
+#include
+#include
+#include
+
+#define INPUT_REF_FREQ U2_DOUBLE_TO_FXPT_FREQ(50e6)
+#define INPUT_REF_FREQ_2X (2*INPUT_REF_FREQ) /* input ref freq with doubler turned on */
+#define MAX_RF_DIV UINT8_C(16) /* max rf divider, divides rf output */
+#define MIN_VCO_FREQ U2_DOUBLE_TO_FXPT_FREQ(2.2e9) /* minimum vco freq */
+#define MAX_VCO_FREQ U2_DOUBLE_TO_FXPT_FREQ(4.4e9) /* minimum vco freq */
+#define MAX_FREQ MAX_VCO_FREQ /* upper bound freq (rf div = 1) */
+#define MIN_FREQ U2_DOUBLE_TO_FXPT_FREQ(68.75e6) /* lower bound freq (rf div = 16) */
+
+u2_fxpt_freq_t adf4350_get_max_freq(void){
+ return MAX_FREQ;
+}
+
+u2_fxpt_freq_t adf4350_get_min_freq(void){
+ return MIN_FREQ;
+}
+
+void adf4350_init(struct db_base *dbb){
+ struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
+
+ /* Initialize the pin levels. */
+ hal_gpio_write( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK, PLL_CE, PLL_CE );
+ adf4350_enable(true, dbb);
+ /* Initialize the registers. */
+ adf4350_load_register(5, dbb);
+ adf4350_load_register(4, dbb);
+ adf4350_load_register(3, dbb);
+ adf4350_load_register(2, dbb);
+ adf4350_load_register(1, dbb);
+ adf4350_load_register(0, dbb);
+}
+
+/*
+void adf4350_update(void){
+ // mirror the lock detect pin to the led debug
+ if (adf4350_get_locked()){
+ io_set_pin(led_pin);
+ }else{
+ io_clear_pin(led_pin);
+ }
+}
+*/
+
+bool adf4350_get_locked(struct db_base *dbb){
+ struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
+
+ int pins;
+ pins = hal_gpio_read( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK );
+ if(pins & PLL_LOCK_DETECT)
+ return true;
+ return false;
+}
+
+void adf4350_enable(bool enable, struct db_base *dbb){
+ struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
+
+ if (enable){ /* chip enable */
+ hal_gpio_write( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK, PLL_PDBRF, PLL_PDBRF );
+ }else{
+ hal_gpio_write( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK, 0, PLL_PDBRF );
+ }
+}
+
+void adf4350_write(uint8_t addr, uint32_t data, struct db_base *dbb){
+ struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
+
+ //printf("SPI write ADDR 0x%x, WORD 0x%x\n", (int) (addr), (int) (data));
+ data |= addr;
+ spi_transact(SPI_TXONLY,db->common.spi_mask,data,32,SPIF_PUSH_FALL);
+ //spi_read_write(clk_pin, data_pin, ld_pin, &data, 32);
+ /* pulse latch */
+ //io_set_pin(le_pin);
+ //io_clear_pin(le_pin);
+}
+
+bool adf4350_set_freq(u2_fxpt_freq_t freq, struct db_base *dbb){
+ struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
+
+ /* Set the frequency by setting int, frac, mod, r, div */
+ if (freq > MAX_FREQ || freq < MIN_FREQ) return false;
+
+ /* Set the prescaler and the min N based on the freq. */
+ uint16_t min_int_div;
+ if (freq > U2_DOUBLE_TO_FXPT_FREQ(3e9) ){
+ db->common.adf4350_regs_prescaler = (uint8_t) 1;
+ min_int_div = UINT16_C(75);
+ }else{
+ db->common.adf4350_regs_prescaler = (uint8_t) 0;
+ min_int_div = UINT16_C(23);
+ }
+
+ /* Ramp up the RF divider until the VCO is within range. */
+ db->common.adf4350_regs_divider_select = (uint8_t) 0;
+ while (freq < MIN_VCO_FREQ){
+ freq <<= 1; //double the freq
+ db->common.adf4350_regs_divider_select++; //double the divider
+ }
+
+ /* Ramp up the R divider until the N divider is at least the minimum. */
+ db->common.adf4350_regs_10_bit_r_counter = (uint16_t) (DIV_ROUND((INPUT_REF_FREQ*min_int_div), freq));
+ //printf("Initial R setting: %u, MIN_INT: %u\n", db->common.adf4350_regs_10_bit_r_counter, min_int_div);
+ if (db->common.adf4350_regs_10_bit_r_counter * U2_DOUBLE_TO_FXPT_FREQ(32e6) < INPUT_REF_FREQ){
+ db->common.adf4350_regs_10_bit_r_counter = (uint16_t) (DIV_ROUND(INPUT_REF_FREQ, U2_DOUBLE_TO_FXPT_FREQ(32e6)));
+ //printf("Updating R setting: %u, MIN_INT: %u\n", db->common.adf4350_regs_10_bit_r_counter, min_int_div);
+ }
+
+ db->common.adf4350_regs_10_bit_r_counter--;
+ //db->common.adf4350_regs_10_bit_r_counter=1;
+
+ do{
+ db->common.adf4350_regs_10_bit_r_counter++;
+ /* throw out some fractional bits in freq to avoid overflow */
+ u2_fxpt_freq_t some_frac_freq = (U2_DOUBLE_TO_FXPT_FREQ(1.0)/db->common.adf4350_regs_mod);
+ uint64_t n_mod = DIV_ROUND(freq, some_frac_freq);
+ n_mod *= db->common.adf4350_regs_10_bit_r_counter;
+ n_mod *= db->common.adf4350_regs_mod;
+ n_mod = DIV_ROUND(n_mod, DIV_ROUND(INPUT_REF_FREQ, some_frac_freq));
+ /* calculate int and frac: regs_mod is a power of 2, this will optimize to a bitwise operation */
+ db->common.adf4350_regs_int = (uint16_t) (n_mod/db->common.adf4350_regs_mod);
+ db->common.adf4350_regs_frac = (uint16_t) (n_mod%db->common.adf4350_regs_mod);
+ //printf("Int %u < Min %u\n", db->common.adf4350_regs_int, min_int_div);
+ }while(db->common.adf4350_regs_int < min_int_div);
+
+ /* calculate the band select so PFD is under 125 KHz */
+ db->common.adf4350_regs_8_bit_band_select_clock_divider_value = \
+ (uint8_t) (INPUT_REF_FREQ/(U2_DOUBLE_TO_FXPT_FREQ(30e3)*db->common.adf4350_regs_10_bit_r_counter)) + 1;
+
+ /*
+ printf(
+ "VCO %u KHz, Int %u, Frac %u, Mod %u, R %u, Div %u, BandSelect %u\n",
+ (uint32_t) ((freq >> U2_FPF_RP)/1000),
+ (uint32_t) db->common.adf4350_regs_int,
+ (uint32_t) db->common.adf4350_regs_frac,
+ (uint32_t) db->common.adf4350_regs_mod,
+ (uint32_t) db->common.adf4350_regs_10_bit_r_counter,
+ (uint32_t) (1 << db->common.adf4350_regs_divider_select),
+ (uint32_t) db->common.adf4350_regs_8_bit_band_select_clock_divider_value
+ );
+ */
+
+ /* load involved registers */
+ adf4350_load_register(5, dbb);
+ adf4350_load_register(3, dbb);
+ adf4350_load_register(1, dbb);
+ adf4350_load_register(2, dbb);
+ adf4350_load_register(4, dbb);
+ adf4350_load_register(0, dbb); /* register 0 must be last */
+ return adf4350_get_locked(dbb);
+}
+
+u2_fxpt_freq_t adf4350_get_freq(struct db_base *dbb){
+ struct db_wbxng_dummy *db = (struct db_wbxng_dummy *) dbb;
+
+ /* Calculate the freq from int, frac, mod, ref, r, div:
+ * freq = (int + frac/mod) * (ref/r)
+ * Keep precision by doing multiplies first:
+ * freq = (((((((int)*mod) + frac)*ref)/mod)/r)/div)
+ */
+ uint64_t temp;
+ temp = (uint64_t) db->common.adf4350_regs_int;
+ temp *= (uint64_t) db->common.adf4350_regs_mod;
+ temp += (uint64_t) db->common.adf4350_regs_frac;
+ temp *= (uint64_t) (INPUT_REF_FREQ >> U2_FPF_RP);
+ temp /= (uint64_t) db->common.adf4350_regs_mod;
+ temp /= (uint64_t) db->common.adf4350_regs_10_bit_r_counter;
+ temp /= (uint64_t) (1 << db->common.adf4350_regs_divider_select);
+
+ /* Shift 1Hz Radix Point for u2_fxpt_freq_t */
+ temp = temp << U2_FPF_RP;
+
+ /*
+ printf(
+ "Got Freq %u KHz, Int %u, Frac %u, Mod %u, R %u, Div %u\n",
+ (uint32_t) ((temp >> U2_FPF_RP)/1000),
+ (uint32_t) db->common.adf4350_regs_int,
+ (uint32_t) db->common.adf4350_regs_frac,
+ (uint32_t) db->common.adf4350_regs_mod,
+ (uint32_t) db->common.adf4350_regs_10_bit_r_counter,
+ (uint32_t) (1 << db->common.adf4350_regs_divider_select)
+ );
+ */
+
+ return (u2_fxpt_freq_t) (temp);
+}