X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=testing%2Fbuild.test2%2FREADME.txt;h=382105ef0148d37f7d966a71024f3964ca625b20;hb=f4612e06c61f6c46cff936d2c6b48d6f2627ff61;hp=f4bedcc8efb78b8a6e12daa4dd1bfa5126fd09f9;hpb=e5e561157c6bdff3aef792dc3a2fca9694a4b702;p=fw%2Fopenocd

diff --git a/testing/build.test2/README.txt b/testing/build.test2/README.txt
old mode 100755
new mode 100644
index f4bedcc8e..382105ef0
--- a/testing/build.test2/README.txt
+++ b/testing/build.test2/README.txt
@@ -1,59 +1,58 @@
-
-This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
-openocd test purposes on Cygwin. I have included it here so others
-might also make use of the same configuration that I use to develop
-Openocd.
-
---Duane Ellis
-
-To make use of it do the following:
-
-(1)	Check out openocd in the standard way.
-
-For example - in cygwin, type this:
-
-    bash$  mkdir -p /home/duane/test
-    bash$  cd /home/duane/test
-    bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
-
-(2)	COPY this folder "right above" where you have OpenOCD.
-
-    bash$  cd /home/duane/test
-    bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.
-
-(3) OPTIONALLY
-
-    You might want to review the file "local.uses"
-    Change options and so forth at the top of the file.
-
-(4) 	Initially, you need to download some additional files.
-	These include "libftdi", "libconfuse", and the ftd2xx drivers.
-
-(5)	You also need to build the supporting libraries and install them
-	(They are installed "locally" only)
-
-	Type this command:
-
-    bash$ cd /home/duane/test
-
-    bash$ make initial.build
-
-    	  which:  (1) downloads files
-	  	  (2) builds the libs
-		  (3) builds OpenOCD
-
-(6)     As you hack upon OpenOCD... to rebuild OpenOCD...
-	
-    bash$ cd /home/duane/test
-
-    bash$ make remake
-
-    	  which: (1) re-bootstraps 
-	  	 (2) re-configures
-		 (3) re-builds
-		 (4) re-installs.
-   
-=======
-**END**
-=======
-
+
+This makefile is how I Duane Ellis (openocd@duaneellis.com) builds
+openocd test purposes on Cygwin. I have included it here so others
+might also make use of the same configuration that I use to develop
+Openocd.
+
+--Duane Ellis
+
+To make use of it do the following:
+
+(1)	Check out openocd in the standard way.
+
+For example - in cygwin, type this:
+
+    bash$  mkdir -p /home/duane/test
+    bash$  cd /home/duane/test
+    bash$  svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd
+
+(2)	COPY this folder "right above" where you have OpenOCD.
+
+    bash$  cd /home/duane/test
+    bash$  cp ./openocd/testing/build.test2/*   /home/duane/test/.
+
+(3) OPTIONALLY
+
+    You might want to review the file "local.uses"
+    Change options and so forth at the top of the file.
+
+(4) 	Initially, you need to download some additional files.
+	These include "libftdi", "libconfuse", and the ftd2xx drivers.
+
+(5)	You also need to build the supporting libraries and install them
+	(They are installed "locally" only)
+
+	Type this command:
+
+    bash$ cd /home/duane/test
+
+    bash$ make initial.build
+
+    	  which:  (1) downloads files
+	  	  (2) builds the libs
+		  (3) builds OpenOCD
+
+(6)     As you hack upon OpenOCD... to rebuild OpenOCD...
+	
+    bash$ cd /home/duane/test
+
+    bash$ make remake
+
+    	  which: (1) re-bootstraps 
+	  	 (2) re-configures
+		 (3) re-builds
+		 (4) re-installs.
+   
+=======
+**END**
+=======