X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftools%2Ffirmware-recovery.tcl;h=9d7e0fce848dca903340ddff1e3c96ca3e3f9f9a;hb=4ddca7dd7186a908397570a25f7ad7454bab3a20;hp=6e23540f0b82d06382a015571b8eacc843aa5550;hpb=bcfb604618c356603d1238815d009ff168db5bf4;p=fw%2Fopenocd

diff --git a/tcl/tools/firmware-recovery.tcl b/tcl/tools/firmware-recovery.tcl
index 6e23540f0..9d7e0fce8 100644
--- a/tcl/tools/firmware-recovery.tcl
+++ b/tcl/tools/firmware-recovery.tcl
@@ -4,6 +4,7 @@ echo "Use -c firmware_help to get help\n"
 set known_boards {
     "asus-rt-n16		ASUS RT-N16"
     "asus-rt-n66u		ASUS RT-N66U"
+    "linksys-wag200g		Linksys WAG200G"
     "linksys-wrt54gl		Linksys WRT54GL v1.1"
     "netgear-dg834v3		Netgear DG834G v3"
     "tp-link_tl-mr3020		TP-LINK TL-MR3020"
@@ -28,7 +29,7 @@ dump_part <name> <filename>	save partition's contents to a file
 erase_part <name>		erase the given partition
 flash_part <name> <filename>	erase, flash and verify the given partition
 ram_boot <filename>		load binary file to RAM and run it
-adapter_khz <freq>		set JTAG clock frequency in kHz
+adapter speed <freq>		set JTAG clock frequency in kHz
 
 For example, to clear nvram and reflash CFE on an RT-N16 using TUMPA, run:
 openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
@@ -37,8 +38,8 @@ openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\
     shutdown
 }
 
-# set default, can be overriden later
-adapter_khz 1000
+# set default, can be overridden later
+adapter speed 1000
 
 proc get_partition { name } {
     global partition_list