X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fxmc4xxx.cfg;h=0e28494a8e52ad49537009faa75d238d9c1b84e9;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=34f0327fdeb6604990eec012eb1f241fceb54c5b;hpb=c048d1f7b15fd5d565ba5e0ea9e2ffaa0dfb4390;p=fw%2Fopenocd

diff --git a/tcl/target/xmc4xxx.cfg b/tcl/target/xmc4xxx.cfg
index 34f0327fd..0e28494a8 100644
--- a/tcl/target/xmc4xxx.cfg
+++ b/tcl/target/xmc4xxx.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Infineon XMC4100/XMC4200/XMC4400/XMC4500 family (ARM Cortex-M4 @ 80-120 MHz)
 #
@@ -35,12 +37,26 @@ if { [using_jtag] } {
 }
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPU_TAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -dap $_CHIPNAME.dap
+
+# Work-area is a space in RAM used for flash programming
+# By default use 16 kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x1000
+}
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME xmc4xxx 0x0C000000 0 0 0 $_TARGETNAME
 
 if { ![using_hla] } {
 	cortex_m reset_config sysresetreq
 }
 
-adapter_khz 1000
+adapter speed 1000