X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fti_tms570.cfg;h=d06ff973fc3971876ca9afb25eda2d5e0d6738e8;hb=2b17a128841c9431f17aaad844f416eccd24f63f;hp=582a4bfa27efbcfaee60d47fef76c11bdc83c697;hpb=5fa41168dd144a550a7c4a4961738204198cde5d;p=fw%2Fopenocd diff --git a/tcl/target/ti_tms570.cfg b/tcl/target/ti_tms570.cfg index 582a4bfa2..d06ff973f 100644 --- a/tcl/target/ti_tms570.cfg +++ b/tcl/target/ti_tms570.cfg @@ -1,4 +1,4 @@ -adapter_khz 1500 +adapter speed 1500 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME @@ -20,8 +20,8 @@ source [find target/icepick.cfg] if { [info exists DAP_TAPID] } { set _DAP_TAPID $DAP_TAPID } -jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable -jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0" +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable +jtag configure $_CHIPNAME.cpu -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0" # ICEpick-C (JTAG route controller) # JRC_TAPID should be set before source-ing this file @@ -50,21 +50,18 @@ jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ -expected-id $_JRC_TAPID8 \ -expected-id $_JRC_TAPID9 \ -ignore-version -jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" +jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.cpu" jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100" -# Cortex R4 target +dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu + +# Cortex-R4 target set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_r4 -endian $_ENDIAN \ - -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003 + -dap $_CHIPNAME.dap -coreid 0 -dbgbase 0x00001003 # TMS570 uses quirky BE-32 mode -$_TARGETNAME dap ti_be_32_quirks 1 - -$_TARGETNAME configure -event gdb-attach { - cortex_r4 dbginit - halt -} +$_CHIPNAME.dap ti_be_32_quirks 1 $_TARGETNAME configure -event "reset-assert" { global _CHIPNAME