X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fti_dm365.cfg;h=f71a77aa8b3e21b1a119452875d5cb4e49f0655a;hb=a3b69dee622066d3a2b70c32775818d82b5ffb54;hp=a260278601155a8693f38baf4178b30e4e1747a5;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=fw%2Fopenocd

diff --git a/tcl/target/ti_dm365.cfg b/tcl/target/ti_dm365.cfg
index a26027860..f71a77aa8 100644
--- a/tcl/target/ti_dm365.cfg
+++ b/tcl/target/ti_dm365.cfg
@@ -82,7 +82,7 @@ target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
 # NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel,
 # and that the work area is used only with a kernel mmu context ...
 $_TARGETNAME configure \
-	-work-area-virt [expr 0xfffe0000 + 0x4000] \
+	-work-area-virt [expr {0xfffe0000 + 0x4000}] \
 	-work-area-phys [dict get $dm365 sram1] \
 	-work-area-size 0x4000 \
 	-work-area-backup 0
@@ -90,8 +90,8 @@ $_TARGETNAME configure \
 # be absolutely certain the JTAG clock will work with the worst-case
 # CLKIN = 19.2 MHz (best case: 36 MHz) even when no bootloader turns
 # on the PLL and starts using it.  OK to speed up after clock setup.
-jtag_rclk 1500
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }
+adapter speed 1500
+$_TARGETNAME configure -event "reset-start" { adapter speed 1500 }
 
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable