X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fti_dm355.cfg;h=42923733eadd1994926ea445ccc2378036aaa112;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=4f8f523e889ded0fbc8b04381b4932d862bbd300;hpb=d4e195ad1b544b0396cab4c70437371958769196;p=fw%2Fopenocd

diff --git a/tcl/target/ti_dm355.cfg b/tcl/target/ti_dm355.cfg
index 4f8f523e8..42923733e 100644
--- a/tcl/target/ti_dm355.cfg
+++ b/tcl/target/ti_dm355.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Texas Instruments DaVinci family: TMS320DM355
 #
@@ -90,7 +92,7 @@ target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
 # NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel,
 # and that the work area is used only with a kernel mmu context ...
 $_TARGETNAME configure \
-	-work-area-virt [expr 0xfffe0000 + 0x4000] \
+	-work-area-virt [expr {0xfffe0000 + 0x4000}] \
 	-work-area-phys [dict get $dm355 sram1] \
 	-work-area-size 0x4000 \
 	-work-area-backup 0
@@ -98,8 +100,8 @@ $_TARGETNAME configure \
 # be absolutely certain the JTAG clock will work with the worst-case
 # CLKIN = 24 MHz (best case: 36 MHz) even when no bootloader turns
 # on the PLL and starts using it.  OK to speed up after clock setup.
-adapter_khz 1500
-$_TARGETNAME configure -event "reset-start" { adapter_khz 1500 }
+adapter speed 1500
+$_TARGETNAME configure -event "reset-start" { adapter speed 1500 }
 
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable