X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstr912.cfg;h=7426276bfbd1f6be406aca1acfec503f4661359c;hb=b60d06ae325c00979e9ff17bb35e868879e6047f;hp=38545ac905c27e68adb4780c53e8ddfa83c15627;hpb=d4e195ad1b544b0396cab4c70437371958769196;p=fw%2Fopenocd

diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index 38545ac90..7426276bf 100644
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -13,9 +13,9 @@ if { [info exists ENDIAN] } {
 }
 
 # jtag speed. We need to stick to 16kHz until we've finished reset.
-adapter_khz 16
+adapter speed 16
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
@@ -46,13 +46,13 @@ if { [info exists BSTAPID] } {
 jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID -ignore-version
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 
-$_TARGETNAME configure -event reset-start { adapter_khz 16 }
+$_TARGETNAME configure -event reset-start { adapter speed 16 }
 
 $_TARGETNAME configure -event reset-init {
 	# We can increase speed now that we know the target is halted.
-	#adapter_khz 3000
+	#adapter speed 3000
 
 	# -- Enable 96K RAM
 	# PFQBC enabled / DTCM & AHB wait-states disabled