X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstr912.cfg;h=7426276bfbd1f6be406aca1acfec503f4661359c;hb=105f8386ad92d27f0171d748f9b2a804a5317fd9;hp=36c0b2a544721a4dd35e4bf986f58f0d2361dbe0;hpb=1c021ed0afb5f9f7d9e8cbce53a4fe985a4c2235;p=fw%2Fopenocd

diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index 36c0b2a54..7426276bf 100644
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -13,9 +13,9 @@ if { [info exists ENDIAN] } {
 }
 
 # jtag speed. We need to stick to 16kHz until we've finished reset.
-adapter_khz 16
+adapter speed 16
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
@@ -48,11 +48,11 @@ jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BST
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 
-$_TARGETNAME configure -event reset-start { adapter_khz 16 }
+$_TARGETNAME configure -event reset-start { adapter speed 16 }
 
 $_TARGETNAME configure -event reset-init {
 	# We can increase speed now that we know the target is halted.
-	#adapter_khz 3000
+	#adapter speed 3000
 
 	# -- Enable 96K RAM
 	# PFQBC enabled / DTCM & AHB wait-states disabled