X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstr730.cfg;h=57681f9fcc94ae1e3e2451322c8ffaa2258fd89c;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=b022be05b34223b28a77f08e3d58b4fe97c61a24;hpb=fa5b0833d5fd146e9ceb9a91b2e8e6364f3bf53a;p=fw%2Fopenocd

diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg
index b022be05b..57681f9fc 100644
--- a/tcl/target/str730.cfg
+++ b/tcl/target/str730.cfg
@@ -1,6 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #STR730 CPU
 
-adapter_khz 3000
+adapter speed 3000
 
 if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
@@ -27,15 +29,15 @@ reset_config trst_and_srst srst_pulls_trst
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 #jtag nTRST and nSRST delay
-adapter_nsrst_delay 500
+adapter srst delay 500
 jtag_ntrst_delay 500
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
 
-$_TARGETNAME configure -event reset-start { adapter_khz 10 }
+$_TARGETNAME configure -event reset-start { adapter speed 10 }
 $_TARGETNAME configure -event reset-init {
-	adapter_khz 3000
+	adapter speed 3000
 
 # Because the hardware cannot be interrogated for the protection state
 # of sectors, initialize all the sectors to be unprotected. The initial
@@ -51,4 +53,3 @@ $_TARGETNAME configure -work-area-phys 0xA0000000 -work-area-size 0x4000 -work-a
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME str7x 0x80000000 0x00040000 0 0 $_TARGETNAME STR73x
-