X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstr710.cfg;h=d26a8b1cf0650ed89b209b28245418b3e1951361;hb=020cb12077cb15be1700bf7733178acfb2b26428;hp=a5955b68c83d1857cd422bc7153383e8ab7fc659;hpb=215a5f7442773693045613cff9e3ce3c7f7e9678;p=fw%2Fopenocd

diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg
index a5955b68c..d26a8b1cf 100644
--- a/tcl/target/str710.cfg
+++ b/tcl/target/str710.cfg
@@ -2,21 +2,21 @@
 adapter_khz 10
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME str710
+   set _CHIPNAME str710
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
 if { [info exists CPUTAPID] } {
-   set  _CPUTAPID $CPUTAPID
+   set _CPUTAPID $CPUTAPID
 } else {
-   set  _CPUTAPID 0x3f0f0f0f
+   set _CPUTAPID 0x3f0f0f0f
 }
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
@@ -27,7 +27,7 @@ reset_config trst_and_srst srst_pulls_trst
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-start { adapter_khz 10 }
 $_TARGETNAME configure -event reset-init {
@@ -51,6 +51,3 @@ set _FLASHNAME $_CHIPNAME.flash0
 flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
 set _FLASHNAME $_CHIPNAME.flash1
 flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 $_TARGETNAME STR71x
-
-# For more information about the configuration files, take a look at:
-# openocd.texi