X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32l1.cfg;h=a81d7c7985bc4ddab4e60a8d41a5c037af4a7dd9;hb=248161cbf47af9f7fc8c00b5efa79a1ff8e65848;hp=0933151a0e9bf2feb80fb45c2533ac3907ac270d;hpb=3e7cfc67099086481fe24da0a30d26bd8d9f74a9;p=fw%2Fopenocd

diff --git a/tcl/target/stm32l1.cfg b/tcl/target/stm32l1.cfg
index 0933151a0..a81d7c798 100644
--- a/tcl/target/stm32l1.cfg
+++ b/tcl/target/stm32l1.cfg
@@ -23,9 +23,9 @@ if { [info exists WORKAREASIZE] } {
 
 # JTAG speed should be <= F_CPU/6.
 # F_CPU after reset is 2MHz, so use F_JTAG max = 333kHz
-adapter_khz 300
+adapter speed 300
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 if {[using_jtag]} {
  jtag_ntrst_delay 100
 }
@@ -79,7 +79,7 @@ proc stm32l_enable_HSI {} {
 	mmw 0x40023808 0x00000001 0
 
 	# Increase JTAG speed
-	adapter_khz 2000
+	adapter speed 2000
 }
 
 $_TARGETNAME configure -event reset-init {
@@ -87,7 +87,7 @@ $_TARGETNAME configure -event reset-init {
 }
 
 $_TARGETNAME configure -event reset-start {
-	adapter_khz 300
+	adapter speed 300
 }
 
 $_TARGETNAME configure -event examine-end {