X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f7x.cfg;h=3782b9a9cce5dcc4fb778b5cc52a9bccd7291037;hb=09ca11066b568497cc2a191e9fedbf08673c15c6;hp=92cf30e0b518fd342fa352eaef74dd5d6b44572d;hpb=65de7c95f41e78746dc41e6173bbee4106a758f9;p=fw%2Fopenocd

diff --git a/tcl/target/stm32f7x.cfg b/tcl/target/stm32f7x.cfg
index 92cf30e0b..3782b9a9c 100644
--- a/tcl/target/stm32f7x.cfg
+++ b/tcl/target/stm32f7x.cfg
@@ -109,13 +109,20 @@ $_TARGETNAME configure -event examine-end {
 	mmw 0xE0042008 0x00001800 0
 }
 
-$_TARGETNAME configure -event trace-config {
+tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 0 -baseaddr 0xE0040000
+
+lappend _telnet_autocomplete_skip _proc_pre_enable_$_CHIPNAME.tpiu
+proc _proc_pre_enable_$_CHIPNAME.tpiu {_targetname} {
+	targets $_targetname
+
 	# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
 	# change this value accordingly to configure trace pins
 	# assignment
 	mmw 0xE0042004 0x00000020 0
 }
 
+$_CHIPNAME.tpiu configure -event pre-enable "_proc_pre_enable_$_CHIPNAME.tpiu $_TARGETNAME"
+
 $_TARGETNAME configure -event reset-init {
 	# If the HSE was previously enabled and the external clock source
 	# disappeared, RCC_CR.HSERDY can get stuck at 1 and the PLL cannot be