X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f3x.cfg;h=ebec04f857ec12da94f4bfacc4e373a030893cd8;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=86e9f594e38053347387e33122ba7e04717e11d8;hpb=2231da8ec4e7d7ae9b652f3dd1a7104f5a110f3f;p=fw%2Fopenocd

diff --git a/tcl/target/stm32f3x.cfg b/tcl/target/stm32f3x.cfg
index 86e9f594e..ebec04f85 100644
--- a/tcl/target/stm32f3x.cfg
+++ b/tcl/target/stm32f3x.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # script for stm32f3x family
 
 #
@@ -28,9 +30,9 @@ if { [info exists WORKAREASIZE] } {
 # bit more to be on the safe side. Perhaps superstition, but if are
 # running off a crystal, we can run closer to the limit. Note
 # that there can be a pretty wide band where things are more or less stable.
-adapter_khz 1000
+adapter speed 1000
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 if {[using_jtag]} {
  jtag_ntrst_delay 100
 }
@@ -73,7 +75,7 @@ if {![using_hla]} {
 
 proc stm32f3x_default_reset_start {} {
 	# Reset clock is HSI (8 MHz)
-	adapter_khz 1000
+	adapter speed 1000
 }
 
 proc stm32f3x_default_examine_end {} {
@@ -93,7 +95,7 @@ proc stm32f3x_default_reset_init {} {
 	mmw 0x40021004 0x00000002 0 ;# RCC_CFGR |= SW[1]
 
 	# Boost JTAG frequency
-	adapter_khz 8000
+	adapter speed 8000
 }
 
 # Default hooks