X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f3x.cfg;fp=tcl%2Ftarget%2Fstm32f3x.cfg;h=4ecc7eda3cd1c6fa0caae1000fb7bad884acf602;hb=09ca11066b568497cc2a191e9fedbf08673c15c6;hp=ebec04f857ec12da94f4bfacc4e373a030893cd8;hpb=65de7c95f41e78746dc41e6173bbee4106a758f9;p=fw%2Fopenocd

diff --git a/tcl/target/stm32f3x.cfg b/tcl/target/stm32f3x.cfg
index ebec04f85..4ecc7eda3 100644
--- a/tcl/target/stm32f3x.cfg
+++ b/tcl/target/stm32f3x.cfg
@@ -103,9 +103,16 @@ $_TARGETNAME configure -event examine-end { stm32f3x_default_examine_end }
 $_TARGETNAME configure -event reset-start { stm32f3x_default_reset_start }
 $_TARGETNAME configure -event reset-init { stm32f3x_default_reset_init }
 
-$_TARGETNAME configure -event trace-config {
+tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 0 -baseaddr 0xE0040000
+
+lappend _telnet_autocomplete_skip _proc_pre_enable_$_CHIPNAME.tpiu
+proc _proc_pre_enable_$_CHIPNAME.tpiu {_targetname} {
+	targets $_targetname
+
 	# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
 	# change this value accordingly to configure trace pins
 	# assignment
 	mmw 0xe0042004 0x00000020 0
 }
+
+$_CHIPNAME.tpiu configure -event pre-enable "_proc_pre_enable_$_CHIPNAME.tpiu $_TARGETNAME"