X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f1x.cfg;h=53e81a59f6b479cb503e7b73ba32bfbe9c685313;hb=60abbda8bcb19e26e073605ec43fdd0f42416567;hp=471878d7fd0f5f7ea2e351a1e81ed918bf29348f;hpb=2eadf1e847f4880c698cae8dca857714e464e471;p=fw%2Fopenocd

diff --git a/tcl/target/stm32f1x.cfg b/tcl/target/stm32f1x.cfg
index 471878d7f..53e81a59f 100644
--- a/tcl/target/stm32f1x.cfg
+++ b/tcl/target/stm32f1x.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # script for stm32f1x family
 
 #
@@ -60,9 +62,9 @@ set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME stm32f1x 0x08000000 $_FLASH_SIZE 0 0 $_TARGETNAME
 
 # JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-adapter_khz 1000
+adapter speed 1000
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 if {[using_jtag]} {
  jtag_ntrst_delay 100
 }
@@ -81,9 +83,16 @@ $_TARGETNAME configure -event examine-end {
 	mmw 0xE0042004 0x00000307 0
 }
 
-$_TARGETNAME configure -event trace-config {
+tpiu create $_CHIPNAME.tpiu -dap $_CHIPNAME.dap -ap-num 0 -baseaddr 0xE0040000
+
+lappend _telnet_autocomplete_skip _proc_pre_enable_$_CHIPNAME.tpiu
+proc _proc_pre_enable_$_CHIPNAME.tpiu {_targetname} {
+	targets $_targetname
+
 	# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
 	# change this value accordingly to configure trace pins
 	# assignment
 	mmw 0xE0042004 0x00000020 0
 }
+
+$_CHIPNAME.tpiu configure -event pre-enable "_proc_pre_enable_$_CHIPNAME.tpiu $_TARGETNAME"