X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fsamsung_s3c2450.cfg;h=801e1bc972ba0a2797f0a5c63b8872a5a0edcd3c;hb=HEAD;hp=ec77291d47ef800f05e5b58c382ceb4129c25bbe;hpb=ce89c7bf6588c7b2800c4ca453278b6f94795130;p=fw%2Fopenocd

diff --git a/tcl/target/samsung_s3c2450.cfg b/tcl/target/samsung_s3c2450.cfg
index ec77291d4..801e1bc97 100644
--- a/tcl/target/samsung_s3c2450.cfg
+++ b/tcl/target/samsung_s3c2450.cfg
@@ -1,35 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Target configuration for the Samsung 2450 system on chip
 # Processor       : ARM926ejs (wb) rev 0 (v4l)
 # Info:   JTAG tap: s3c2450.cpu tap/device found: 0x07926F0F
 
 
 # FIX!!! what to use here?
-# 
+#
 # RCLK?
-# 
-# jtag_khz 0
+#
+# adapter speed 0
 #
 # Really low clock during reset?
 #
-# jtag_khz 1
+# adapter speed 1
 
 if { [info exists CHIPNAME] } {
-  set  _CHIPNAME $CHIPNAME
+  set _CHIPNAME $CHIPNAME
 } else {
-  set  _CHIPNAME s3c2450
+  set _CHIPNAME s3c2450
 }
 
 if { [info exists ENDIAN] } {
-  set  _ENDIAN $ENDIAN
+  set _ENDIAN $ENDIAN
 } else {
  # this defaults to a bigendian
-  set  _ENDIAN little
+  set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
   set _CPUTAPID $CPUTAPID
 } else {
- # force an error till we get a good number
   set _CPUTAPID 0x07926f0f
 }
 
@@ -37,7 +38,7 @@ if { [info exists CPUTAPID ] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xE -irmask 0x0f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # FIX!!!!! should this really use srst_pulls_trst?
 # With srst_pulls_trst "reset halt" will not reset into the