X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fsamsung_s3c2440.cfg;h=d976a8e3f851174933b2f9fe388e848ef205ff0e;hb=3bccc77999175494ceb534c172475e509ff99189;hp=9cd27d1e887e8aba06e3f94a47bc45c687505aaa;hpb=abfd4b19a6b1c1e257aed343af5ab71709f41bcb;p=fw%2Fopenocd

diff --git a/tcl/target/samsung_s3c2440.cfg b/tcl/target/samsung_s3c2440.cfg
index 9cd27d1e8..d976a8e3f 100644
--- a/tcl/target/samsung_s3c2440.cfg
+++ b/tcl/target/samsung_s3c2440.cfg
@@ -1,22 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Target configuration for the Samsung 2440 system on chip
 # Tested on a S3C2440 Evaluation board by keesj
 # Processor       : ARM920Tid(wb) rev 0 (v4l)
 # Info:   JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0)
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME s3c2440
+   set _CHIPNAME s3c2440
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
   # this defaults to a bigendian
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x0032409d
@@ -26,10 +28,9 @@ if { [info exists CPUTAPID ] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1
 
 #reset configuration
 reset_config trst_and_srst
-