X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fpxa270.cfg;h=f5d2c85fc9a30d156f520059c78a42c7deba2d04;hb=1b0f194d90f38e363939b7f11260fc64680016e1;hp=84fc2f77c6039e9e23baae3affd7a0e64d3ea4c4;hpb=456ec367952587ab24b204b233b669a6e33b8af6;p=fw%2Fopenocd

diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg
index 84fc2f77c..f5d2c85fc 100644
--- a/tcl/target/pxa270.cfg
+++ b/tcl/target/pxa270.cfg
@@ -27,18 +27,24 @@ if { [info exists CPUTAPID2 ] } {
    set _CPUTAPID2 0x79265013
 }
 
+if { [info exists CPUTAPID3 ] } {
+   set _CPUTAPID2 $CPUTAPID3
+} else {
+  # set useful default
+   set _CPUTAPID3 0x89265013
+}
 
-# set jtag_nsrst_delay to the delay introduced by your reset circuit
+# set adapter_nsrst_delay to the delay introduced by your reset circuit
 # the rest of the needed delays are built into the openocd program
-jtag_nsrst_delay 260
+adapter_nsrst_delay 260
 # set the jtag_ntrst_delay to the delay introduced by a reset circuit
 # the rest of the needed delays are built into the openocd program
 jtag_ntrst_delay 250
 
 set _TARGETNAME $_CHIPNAME.cpu
-jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2
+jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3
 
 target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0