X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fpxa270.cfg;h=bd904b5dd660689f649ca87c30aa234eed1ce59c;hb=385eedfc6f0b82c5d6715c740ee40bdce983ef04;hp=f5d2c85fc9a30d156f520059c78a42c7deba2d04;hpb=1b0f194d90f38e363939b7f11260fc64680016e1;p=fw%2Fopenocd

diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg
index f5d2c85fc..bd904b5dd 100644
--- a/tcl/target/pxa270.cfg
+++ b/tcl/target/pxa270.cfg
@@ -1,42 +1,42 @@
 #Marvell/Intel PXA270 Script
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME pxa270
+   set _CHIPNAME pxa270
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
 #IDs for pxa270. Are there more?
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
   # set useful default
    set _CPUTAPID 0x49265013
 }
 
-if { [info exists CPUTAPID2 ] } {
+if { [info exists CPUTAPID2] } {
    set _CPUTAPID2 $CPUTAPID2
 } else {
   # set useful default
    set _CPUTAPID2 0x79265013
 }
 
-if { [info exists CPUTAPID3 ] } {
+if { [info exists CPUTAPID3] } {
    set _CPUTAPID2 $CPUTAPID3
 } else {
   # set useful default
    set _CPUTAPID3 0x89265013
 }
 
-# set adapter_nsrst_delay to the delay introduced by your reset circuit
+# set adapter srst delay to the delay introduced by your reset circuit
 # the rest of the needed delays are built into the openocd program
-adapter_nsrst_delay 260
+adapter srst delay 260
 # set the jtag_ntrst_delay to the delay introduced by a reset circuit
 # the rest of the needed delays are built into the openocd program
 jtag_ntrst_delay 250
@@ -44,7 +44,7 @@ jtag_ntrst_delay 250
 set _TARGETNAME $_CHIPNAME.cpu
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3
 
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off
 $_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0