X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fpsoc5lp.cfg;h=fe441749000f0a4f4aa97ae1a8e25059d302ab66;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=b4e8d05fa688707ce6899754159e1c2783cc34c1;hpb=06123153f38280608b1e92dcb766b31ade7e4668;p=fw%2Fopenocd

diff --git a/tcl/target/psoc5lp.cfg b/tcl/target/psoc5lp.cfg
index b4e8d05fa..fe4417490 100644
--- a/tcl/target/psoc5lp.cfg
+++ b/tcl/target/psoc5lp.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Cypress PSoC 5LP
 #
@@ -34,7 +36,7 @@ if { [info exists WORKAREASIZE] } {
 	set _WORKAREASIZE 0x2000
 }
 
-$_TARGETNAME configure -work-area-phys [expr 0x20000000 - $_WORKAREASIZE / 2] \
+$_TARGETNAME configure -work-area-phys [expr {0x20000000 - $_WORKAREASIZE / 2}] \
                        -work-area-size $_WORKAREASIZE -work-area-backup 0
 
 source [find mem_helper.tcl]
@@ -43,15 +45,15 @@ $_TARGETNAME configure -event reset-init {
 	# Configure Target Device (PSoC 5LP Device Programming Specification 5.2)
 
 	set PANTHER_DBG_CFG 0x4008000C
-	set PANTHER_DBG_CFG_BYPASS [expr 1 << 1]
+	set PANTHER_DBG_CFG_BYPASS [expr {1 << 1}]
 	mmw $PANTHER_DBG_CFG $PANTHER_DBG_CFG_BYPASS 0
 
 	set PM_ACT_CFG0 0x400043A0
 	mww $PM_ACT_CFG0 0xBF
 
 	set FASTCLK_IMO_CR 0x40004200
-	set FASTCLK_IMO_CR_F_RANGE_2    [expr 2 << 0]
-	set FASTCLK_IMO_CR_F_RANGE_MASK [expr 7 << 0]
+	set FASTCLK_IMO_CR_F_RANGE_2    [expr {2 << 0}]
+	set FASTCLK_IMO_CR_F_RANGE_MASK [expr {7 << 0}]
 	mmw $FASTCLK_IMO_CR $FASTCLK_IMO_CR_F_RANGE_2 $FASTCLK_IMO_CR_F_RANGE_MASK
 }