X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fpsoc4.cfg;h=baa2c83f4160e0d1896d1e78b8bf3155b4cca7b3;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=544e109873c034f7ddf9335b47ff3c63e456f1ed;hpb=3605cb96252efb4644924f1c1357a1ea122c6390;p=fw%2Fopenocd

diff --git a/tcl/target/psoc4.cfg b/tcl/target/psoc4.cfg
index 544e10987..baa2c83f4 100644
--- a/tcl/target/psoc4.cfg
+++ b/tcl/target/psoc4.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # script for Cypress PSoC 4 devices
 
 #
@@ -36,7 +38,7 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME psoc4 0 0 0 0 $_TARGETNAME
 
-adapter_khz 1500
+adapter speed 1500
 
 # Reset, bloody PSoC 4 reset
 #
@@ -60,7 +62,7 @@ adapter_khz 1500
 #
 # Newer families like PSoC 4000, 4100M, 4200M, 4100L, 4200L and PSoC 4 BLE
 # clear TEST_MODE flag during device reset so workaround is not possible.
-# Use a KitProg adapter for theese devices or "reset halt" will not stop
+# Use a KitProg adapter for these devices or "reset halt" will not stop
 # before executing user code.
 #
 # 3) SWD cannot be connected during system initialization after reset.
@@ -74,22 +76,22 @@ if {![using_hla]} {
 }
 
 proc psoc4_get_family_id {} {
-	set err [catch "mem2array romtable_pid 32 0xF0000FE0 3"]
+	set err [catch {set romtable_pid [read_memory 0xF0000FE0 32 3]}]
 	if { $err } {
 		return 0
 	}
-	if { [expr $romtable_pid(0) & 0xffffff00 ]
-	  || [expr $romtable_pid(1) & 0xffffff00 ]
-	  || [expr $romtable_pid(2) & 0xffffff00 ] } {
+	if { [expr {[lindex $romtable_pid 0] & 0xffffff00 }]
+	  || [expr {[lindex $romtable_pid 1] & 0xffffff00 }]
+	  || [expr {[lindex $romtable_pid 2] & 0xffffff00 }] } {
 		echo "Unexpected data in ROMTABLE"
 		return 0
 	}
-	set designer_id [expr (( $romtable_pid(1) & 0xf0 ) >> 4) | (( $romtable_pid(2) & 0xf ) << 4 ) ]
+	set designer_id [expr {(( [lindex $romtable_pid 1] & 0xf0 ) >> 4) | (( [lindex $romtable_pid 2] & 0xf ) << 4 ) }]
 	if { $designer_id != 0xb4 } {
 		echo [format "ROMTABLE Designer ID 0x%02x is not Cypress" $designer_id]
 		return 0
 	}
-	set family_id [expr ( $romtable_pid(0) & 0xff ) | (( $romtable_pid(1) & 0xf ) << 8 ) ]
+	set family_id [expr {( [lindex $romtable_pid 0] & 0xff ) | (( [lindex $romtable_pid 1] & 0xf ) << 8 ) }]
 	return $family_id
 }
 
@@ -118,7 +120,7 @@ proc ocd_process_reset_inner { MODE } {
 	}
 
 	if { ! [info exists PSOC4_USE_ACQUIRE] } {
-		if { 0 == [string compare [adapter_name] kitprog ] } {
+		if { 0 == [string compare [adapter name] kitprog ] } {
 			set PSOC4_USE_ACQUIRE 1
 		} else {
 			set PSOC4_USE_ACQUIRE 0
@@ -138,7 +140,7 @@ proc ocd_process_reset_inner { MODE } {
 	$t invoke-event reset-assert-pre
 
 	if { $halt && $PSOC4_USE_ACQUIRE } {
-		catch { [adapter_name] acquire_psoc }
+		catch { [adapter name] acquire_psoc }
 		$t arp_examine
 	} else {
 		if { $PSOC4_TEST_MODE_WORKAROUND } {
@@ -193,9 +195,9 @@ proc ocd_process_reset_inner { MODE } {
 		}
 
 		# Set registers to reset vector values
-		mem2array value 32 0 2
-		reg pc [expr $value(1) & 0xfffffffe ]
-		reg msp $value(0)
+		set value [read_memory 0x0 32 2]
+		reg pc [expr {[lindex $value 1] & 0xfffffffe}]
+		reg msp [lindex $value 0]
 
 		if { $PSOC4_TEST_MODE_WORKAROUND } {
 			catch { mww $TEST_MODE 0 }